Turbidity is a characteristic related to the concentration of suspended solids particles in water and has been adopted as an easy and reasonably accurate measure of overall water quality. The most widely applied water...Turbidity is a characteristic related to the concentration of suspended solids particles in water and has been adopted as an easy and reasonably accurate measure of overall water quality. The most widely applied water treatment processes, a combination of some or all of coagulation, flocculation, sedimentation and filtration to reduce or eliminate turbidity and improve water quality. In this research, proposed approach was adopted on the basis of applying two sequent treatments that used coagulation, flocculation and sedimentation processes under certain operating conditions of mixing speed, mixing time and settling time for each treatment. The environmentally friendly natural coagulants of date seeds (DS) or pollen sheath (PS) from local Iraqi palm was used in the first treatment and alum was used in the second treatment at their predetermined optimum doses to treat low ( NTU), medium ( NTU) and high ( NTU) ben- tonite synthetic turbid water. Experimental results clearly show that the proposed approach was superior in perform- ance in terms of residual turbidity compared with conventional approach using both of (DS) and (PS) natural coagulants in which it achieved a significant reduction in turbidity to less of 5 NTU that meeting WHO drinking water guidelines for all tested synthetic turbid water. Moreover, in some cases, it produced excellent water quality having residual tur- bidity less of 0.1 NTU. In addition to decrease the settling time to 30 minutes and minimize risks of alum dose required to 60%. These viable advantages are significant to current practices in advanced water treatment technologies such as reverse osmosis in cost, energy, effectiveness, safety and maintenance. So, it is recommended to consider proposed approach in this research work to be a novel pretreatment approach in advanced water treatment.展开更多
In Zimapan Valley, Mexico, up to 1.1 mg·L-1 of arsenic concentrations have been detected in deep wells that are used as drinking water supply for almost 39,000 people, which could have been exposed to level...In Zimapan Valley, Mexico, up to 1.1 mg·L-1 of arsenic concentrations have been detected in deep wells that are used as drinking water supply for almost 39,000 people, which could have been exposed to levels higher than 10 μg·L-1 of arsenic, the maximum level recommended by the World Health Organization. Chronic consumption of water contaminated with arsenic can cause several diseases, including cancer. For it, the implementation of practical and economical methods to remove arsenic from drinking water is crucial to protect the population health. In this work, an electrochemical method to remove arsenic from drinking water is described. The process, monitored by Tyndall effect, utilizes Cu2+ and Zn2+ ions from a brass electrode in an electrochemical cell with water as electrolyte. Results show that the EC process reduces the concentration of the arsenic diluted in Zimapan water to a level below the limit of detection of the atomic absorption spectrophotometer employed. Arsenic was removed through the formation of Cu and Zn arsenic compounds. Cu2+ and Zn2+ ions form a hydroxide and eventually polycrystalline precipitation of kottigite and cornubite complexes (identified by energy-dispersive X-ray spectroscopy and X-ray diffraction), which are then filtered to eliminate the precipitated arsenic compounds.展开更多
文摘Turbidity is a characteristic related to the concentration of suspended solids particles in water and has been adopted as an easy and reasonably accurate measure of overall water quality. The most widely applied water treatment processes, a combination of some or all of coagulation, flocculation, sedimentation and filtration to reduce or eliminate turbidity and improve water quality. In this research, proposed approach was adopted on the basis of applying two sequent treatments that used coagulation, flocculation and sedimentation processes under certain operating conditions of mixing speed, mixing time and settling time for each treatment. The environmentally friendly natural coagulants of date seeds (DS) or pollen sheath (PS) from local Iraqi palm was used in the first treatment and alum was used in the second treatment at their predetermined optimum doses to treat low ( NTU), medium ( NTU) and high ( NTU) ben- tonite synthetic turbid water. Experimental results clearly show that the proposed approach was superior in perform- ance in terms of residual turbidity compared with conventional approach using both of (DS) and (PS) natural coagulants in which it achieved a significant reduction in turbidity to less of 5 NTU that meeting WHO drinking water guidelines for all tested synthetic turbid water. Moreover, in some cases, it produced excellent water quality having residual tur- bidity less of 0.1 NTU. In addition to decrease the settling time to 30 minutes and minimize risks of alum dose required to 60%. These viable advantages are significant to current practices in advanced water treatment technologies such as reverse osmosis in cost, energy, effectiveness, safety and maintenance. So, it is recommended to consider proposed approach in this research work to be a novel pretreatment approach in advanced water treatment.
文摘In Zimapan Valley, Mexico, up to 1.1 mg·L-1 of arsenic concentrations have been detected in deep wells that are used as drinking water supply for almost 39,000 people, which could have been exposed to levels higher than 10 μg·L-1 of arsenic, the maximum level recommended by the World Health Organization. Chronic consumption of water contaminated with arsenic can cause several diseases, including cancer. For it, the implementation of practical and economical methods to remove arsenic from drinking water is crucial to protect the population health. In this work, an electrochemical method to remove arsenic from drinking water is described. The process, monitored by Tyndall effect, utilizes Cu2+ and Zn2+ ions from a brass electrode in an electrochemical cell with water as electrolyte. Results show that the EC process reduces the concentration of the arsenic diluted in Zimapan water to a level below the limit of detection of the atomic absorption spectrophotometer employed. Arsenic was removed through the formation of Cu and Zn arsenic compounds. Cu2+ and Zn2+ ions form a hydroxide and eventually polycrystalline precipitation of kottigite and cornubite complexes (identified by energy-dispersive X-ray spectroscopy and X-ray diffraction), which are then filtered to eliminate the precipitated arsenic compounds.
