The paper initiates by exploring the importance of maintaining,repairing,and reinforcing bridges.Subsequently,it delves into routine and preventative maintenance measures tailored for small to medium-sized bridges.Add...The paper initiates by exploring the importance of maintaining,repairing,and reinforcing bridges.Subsequently,it delves into routine and preventative maintenance measures tailored for small to medium-sized bridges.Additionally,the paper examines repair and reinforcement techniques specifically designed for deteriorated small and medium-sized bridges,encompassing methods for fortifying both the bridge foundation and upper and lower structures.Lastly,the paper proposes suggestions aimed at fostering discussions and exchanges on the development of maintenance and repair processes for deteriorated small and medium-sized bridges.展开更多
I consider a system whose deterioration follows a discrete-time and discrete-state Markov chain with an absorbing state. When the system is put into practice, I may select operation (wait), imperfect repair, or replac...I consider a system whose deterioration follows a discrete-time and discrete-state Markov chain with an absorbing state. When the system is put into practice, I may select operation (wait), imperfect repair, or replacement at each discrete-time point. The true state of the system is not known when it is operated. Instead, the system is monitored after operation and some incomplete information concerned with the deterioration is obtained for decision making. Since there are multiple imperfect repairs, I can select one option from them when the imperfect repair is preferable to operation and replacement. To express this situation, I propose a POMDP model and theoretically investigate the structure of an optimal maintenance policy minimizing a total expected discounted cost for an unbounded horizon. Then two stochastic orders are used for the analysis of our problem.展开更多
Most warranty cost models based on preventive maintenance operations are assumed that products improve at each preventive maintenance （PM） operation and the failure rate is reduced to the failure rate of new product...Most warranty cost models based on preventive maintenance operations are assumed that products improve at each preventive maintenance （PM） operation and the failure rate is reduced to the failure rate of new products or to some specified level. To make warranty cost models more suitable to real operations, a modeling method of the PM warranty cost was proposed with the situation where each PM operation slowed the rate of product degradation. A warranty cost model was built on PM operations. On the basis of the cost model, both without and with reliability limit PM warranty policy, algorithms were presented to derive the optimal PM number and the optimal PM interval with an objective of minimizing expected total warranty cost over a t＇mite warranty period. Finally, to demonstrate the feasibility of the presented modeling method, Weibuil distribution cases were tested by numerical simulations. The simulation results indicate that the proposed modeling method is feasible and valid for resolving the optimal solution of the product warranty cost.展开更多
One-shot systems such as missiles and extinguishers are placed in storage for a long time and used only once during their lives. Their reliability deteriorates with time even when they are in storage, and their failur...One-shot systems such as missiles and extinguishers are placed in storage for a long time and used only once during their lives. Their reliability deteriorates with time even when they are in storage, and their failures are detected only through inspections for their characteristics. Thus, we need to decide an appropriate inspection policy for such systems. In this paper, we deal with a system comprising non-identical units in series, where only minimal repairs are performed when unit failures are detected by periodic inspections. The system is replaced and becomes “as good as new” when the nth failure of the system is detected. Our objective is to find the optimal inspection interval and number of failures before replacement that minimize the expected total system cost per unit of time.展开更多
Forestry intensification requires the construction of new forest roads and quality maintenance of the existing forest-road system.The powerful modern equipment used for forestry processes mechanization puts new requir...Forestry intensification requires the construction of new forest roads and quality maintenance of the existing forest-road system.The powerful modern equipment used for forestry processes mechanization puts new requirements on the pavement of the constructed roads but also on their maintenance in good technical condition.Therefore,new roadway requirements are imposed in terms of road pavement and maintenance,i.e.there are new requirements regarding the operational qualitative indicators.展开更多
The Korea Water Resources Corporation （K-Water） has encountered four problems during the management of water resources of approximately 1,300 buildings spread throughout the country-degradation, budget constraints, ...The Korea Water Resources Corporation （K-Water） has encountered four problems during the management of water resources of approximately 1,300 buildings spread throughout the country-degradation, budget constraints, lack of standards, and lack of planning. In this study, we have developed a mechanism for collecting, maintaining, and analyzing ground data for repair and replacement works. Our BMS （building maintenance system） uses the recorded repair and replacement work histories and calculates the life cycle costs of the related items. Further, it enables the performance of repair and replacement tasks through an integrated approach aimed at preventive maintenance. In this manner, the BMS is expected to maximize the efficiency of the formulation of prevention and maintenance work plans, monitoring of work histories, predictions of future tasks from the analyses of repair and replacement histories, and performance of LCC （life cycle cost） calculations. Reliable maintenance of national properties can thus be achieved by using the BMS, which promotes reasonable and efficient repair and replacement activities.展开更多
By reviewing the development history of the automobile maintenance industry,this article fully expounds the importance of standardization in the development of the automobile maintenance industry,including the develop...By reviewing the development history of the automobile maintenance industry,this article fully expounds the importance of standardization in the development of the automobile maintenance industry,including the development and reform of the automobile maintenance system,the establishment of the automobile maintenance standards system,and the transformation and upgrading of the industry.The standardization of automobile maintenance will also play a better role in supporting,serving and Leading the construction of a transportation power and a quality power and promoting the high-quality development of the industry.展开更多
Optimum maintenance and availability of a series system whose components are subject to imperfect repairs are studied in this paper. Imperfect corrective maintenance is treated in a way that after it the life of each ...Optimum maintenance and availability of a series system whose components are subject to imperfect repairs are studied in this paper. Imperfect corrective maintenance is treated in a way that after it the life of each component in the system will be decreased to a fraction of its immediately previous one and the repair time will be increased to a multiple of the one immediately preceding it, where successive failure free times are independent and so are successive repair times. Under such an assumption, the limiting system availability, mean time between system failures or repairs are derived based on some related results. A numerical example is presented to compare with Barlow and Proschan's availability model. Two classes of maintenance cost models are proposed and the optimum maintenance policies are also discussed for series system with n components in this paper.展开更多
Predicting of repair and maintenance （R＆M） costs of tractors in any mechanized farm is necessary for owners and managers to obtain information on overall costs and to control financial balance and production econom...Predicting of repair and maintenance （R＆M） costs of tractors in any mechanized farm is necessary for owners and managers to obtain information on overall costs and to control financial balance and production economy. In this context a study was conducted to predict accumulated R＆M costs （Y） of two-wheel drive （2WD） tractors based on accumulated usage hours （X） in Misagh-e-Sabz Agribusiness Company in Iran. Recorded data of the company were used to determine regression models for predicting accumulated R＆M costs （as percentage of initial purchase price） based on accumulated usage hours. The statistical results of the study indicated that in order to predict accumulated R＆M costs of 2WD tractors with accumulated usage hours of 2260 h or less the power regression model Y=0.013 （X/100）1.677 with R2=0.976, and to predict accumulated R＆M costs of 2WD tractors with accumulated usage hours of 2260 h or more the polynomial regression model Y=0.004 （X/100）2-0.181 （X/1 00）＋4.373 with R2=0.998 can be strongly suggested.展开更多
An accurate and objective assessment of the health status of EMU trains is of great importance.In order to make sure the trains are functional,reliable,and endurable in their full life cycle(FLC),health assessment met...An accurate and objective assessment of the health status of EMU trains is of great importance.In order to make sure the trains are functional,reliable,and endurable in their full life cycle(FLC),health assessment method for EMU trains after Level 3-5 maintenance and repair is studied.First,the element-selection principles and the assessment rules are defined;second,to present the complex topological relationship between the elements in assessment,a functional logical structure construction method is proposed;third,a health value calculation model is defined based on the element’s characteristics and their logical structures.The health variables of each element is calculated and fitted following the steps in the corresponding weight calculation methods.The assessment method is proved to be applicable and effective.展开更多
An aero-engine is a typically repairable and complex system and its maintenance level has a close relationship with the maintenance cost. The inaccurate measurement for the maintenance level of an aero-engine can indu...An aero-engine is a typically repairable and complex system and its maintenance level has a close relationship with the maintenance cost. The inaccurate measurement for the maintenance level of an aero-engine can induce higher overhaul maintenance costs. Variable precision rough set （VPRS） theory is used to determine the maintenance level of an aero-engine. According to the relationship between condition information and performance parameters of aero-engine modules, decision rules are established for reflecting the real condition of an aeroengine when its maintenance level needs to be determined. Finally, the CF6 engine is used as an example to illustrate the method to be effective.展开更多
文摘The paper initiates by exploring the importance of maintaining,repairing,and reinforcing bridges.Subsequently,it delves into routine and preventative maintenance measures tailored for small to medium-sized bridges.Additionally,the paper examines repair and reinforcement techniques specifically designed for deteriorated small and medium-sized bridges,encompassing methods for fortifying both the bridge foundation and upper and lower structures.Lastly,the paper proposes suggestions aimed at fostering discussions and exchanges on the development of maintenance and repair processes for deteriorated small and medium-sized bridges.
文摘I consider a system whose deterioration follows a discrete-time and discrete-state Markov chain with an absorbing state. When the system is put into practice, I may select operation (wait), imperfect repair, or replacement at each discrete-time point. The true state of the system is not known when it is operated. Instead, the system is monitored after operation and some incomplete information concerned with the deterioration is obtained for decision making. Since there are multiple imperfect repairs, I can select one option from them when the imperfect repair is preferable to operation and replacement. To express this situation, I propose a POMDP model and theoretically investigate the structure of an optimal maintenance policy minimizing a total expected discounted cost for an unbounded horizon. Then two stochastic orders are used for the analysis of our problem.
基金National Natural Science Foundation of China(No.60574054No.70771065No.70671065)
文摘Most warranty cost models based on preventive maintenance operations are assumed that products improve at each preventive maintenance （PM） operation and the failure rate is reduced to the failure rate of new products or to some specified level. To make warranty cost models more suitable to real operations, a modeling method of the PM warranty cost was proposed with the situation where each PM operation slowed the rate of product degradation. A warranty cost model was built on PM operations. On the basis of the cost model, both without and with reliability limit PM warranty policy, algorithms were presented to derive the optimal PM number and the optimal PM interval with an objective of minimizing expected total warranty cost over a t＇mite warranty period. Finally, to demonstrate the feasibility of the presented modeling method, Weibuil distribution cases were tested by numerical simulations. The simulation results indicate that the proposed modeling method is feasible and valid for resolving the optimal solution of the product warranty cost.
文摘One-shot systems such as missiles and extinguishers are placed in storage for a long time and used only once during their lives. Their reliability deteriorates with time even when they are in storage, and their failures are detected only through inspections for their characteristics. Thus, we need to decide an appropriate inspection policy for such systems. In this paper, we deal with a system comprising non-identical units in series, where only minimal repairs are performed when unit failures are detected by periodic inspections. The system is replaced and becomes “as good as new” when the nth failure of the system is detected. Our objective is to find the optimal inspection interval and number of failures before replacement that minimize the expected total system cost per unit of time.
文摘Forestry intensification requires the construction of new forest roads and quality maintenance of the existing forest-road system.The powerful modern equipment used for forestry processes mechanization puts new requirements on the pavement of the constructed roads but also on their maintenance in good technical condition.Therefore,new roadway requirements are imposed in terms of road pavement and maintenance,i.e.there are new requirements regarding the operational qualitative indicators.
文摘The Korea Water Resources Corporation （K-Water） has encountered four problems during the management of water resources of approximately 1,300 buildings spread throughout the country-degradation, budget constraints, lack of standards, and lack of planning. In this study, we have developed a mechanism for collecting, maintaining, and analyzing ground data for repair and replacement works. Our BMS （building maintenance system） uses the recorded repair and replacement work histories and calculates the life cycle costs of the related items. Further, it enables the performance of repair and replacement tasks through an integrated approach aimed at preventive maintenance. In this manner, the BMS is expected to maximize the efficiency of the formulation of prevention and maintenance work plans, monitoring of work histories, predictions of future tasks from the analyses of repair and replacement histories, and performance of LCC （life cycle cost） calculations. Reliable maintenance of national properties can thus be achieved by using the BMS, which promotes reasonable and efficient repair and replacement activities.
文摘By reviewing the development history of the automobile maintenance industry,this article fully expounds the importance of standardization in the development of the automobile maintenance industry,including the development and reform of the automobile maintenance system,the establishment of the automobile maintenance standards system,and the transformation and upgrading of the industry.The standardization of automobile maintenance will also play a better role in supporting,serving and Leading the construction of a transportation power and a quality power and promoting the high-quality development of the industry.
文摘Optimum maintenance and availability of a series system whose components are subject to imperfect repairs are studied in this paper. Imperfect corrective maintenance is treated in a way that after it the life of each component in the system will be decreased to a fraction of its immediately previous one and the repair time will be increased to a multiple of the one immediately preceding it, where successive failure free times are independent and so are successive repair times. Under such an assumption, the limiting system availability, mean time between system failures or repairs are derived based on some related results. A numerical example is presented to compare with Barlow and Proschan's availability model. Two classes of maintenance cost models are proposed and the optimum maintenance policies are also discussed for series system with n components in this paper.
文摘Predicting of repair and maintenance （R＆M） costs of tractors in any mechanized farm is necessary for owners and managers to obtain information on overall costs and to control financial balance and production economy. In this context a study was conducted to predict accumulated R＆M costs （Y） of two-wheel drive （2WD） tractors based on accumulated usage hours （X） in Misagh-e-Sabz Agribusiness Company in Iran. Recorded data of the company were used to determine regression models for predicting accumulated R＆M costs （as percentage of initial purchase price） based on accumulated usage hours. The statistical results of the study indicated that in order to predict accumulated R＆M costs of 2WD tractors with accumulated usage hours of 2260 h or less the power regression model Y=0.013 （X/100）1.677 with R2=0.976, and to predict accumulated R＆M costs of 2WD tractors with accumulated usage hours of 2260 h or more the polynomial regression model Y=0.004 （X/100）2-0.181 （X/1 00）＋4.373 with R2=0.998 can be strongly suggested.
文摘An accurate and objective assessment of the health status of EMU trains is of great importance.In order to make sure the trains are functional,reliable,and endurable in their full life cycle(FLC),health assessment method for EMU trains after Level 3-5 maintenance and repair is studied.First,the element-selection principles and the assessment rules are defined;second,to present the complex topological relationship between the elements in assessment,a functional logical structure construction method is proposed;third,a health value calculation model is defined based on the element’s characteristics and their logical structures.The health variables of each element is calculated and fitted following the steps in the corresponding weight calculation methods.The assessment method is proved to be applicable and effective.
文摘An aero-engine is a typically repairable and complex system and its maintenance level has a close relationship with the maintenance cost. The inaccurate measurement for the maintenance level of an aero-engine can induce higher overhaul maintenance costs. Variable precision rough set （VPRS） theory is used to determine the maintenance level of an aero-engine. According to the relationship between condition information and performance parameters of aero-engine modules, decision rules are established for reflecting the real condition of an aeroengine when its maintenance level needs to be determined. Finally, the CF6 engine is used as an example to illustrate the method to be effective.
