Mechanical Response and Energy Dissipation Analysis of Heat-Treated Granite Under Repeated Impact Loading

The mechanical behaviors and energy dissipation characteristics of heat-treated granite were investigated under repeated impact loading.The granite samples were firstly heat-treated at the temperature of 20℃,200℃,400℃,and 600℃,respectively.The thermal damage characteristics of these samples were then observed and measured before impact tests.Dynamic impact compression tests finally were carried out using a modified split-Hopkinson pressure bar under three impact velocities of 12 m/s,15 m/s,and 18 m/s.These test results show that the mineral composition and the main oxides of the granite do not change with these treatment temperatures.The number of microcracks and microvoids decreases in the sample after 200℃ treatment.The mechanical properties of a sample after 600℃ treatment were rapidly deteriorated under the same impact velocity.The average of peak stress is much smaller than those after 20℃,200℃ and 400℃ treatments.The heat-treated samples have an energy threshold each.When the dissipated energy of a sample under a single impact is less than this threshold,the repeated impacts hardly lead to further damage accumulation even if its total breakage energy dissipation(BED)density is large.Under the same number of repeated impacts,the cumulative BED density of a sample after 600℃ treatment is the largest and its damage evolves most quickly.The total BED density of the sample after 200℃ treatment is the highest,which implies that this sample has better resistance to repeated impact,thus having less crack initiation and growth.

Failure Characteristic of Laser Cladding Samples on Repeated Impact

Using self-made impact fatigue test instruments and related analytic devices,the mechanical components with laser cladding layer have been attempted. It is found that, onrepeated impact force, several failure modes of the components include the surface cracks, surfaceplastic deformation, corrosive pitting and coat collapse, etc. The paper reported the test methodand initial analysis conclusions about the unique failure characteristics of the mechanicalcomponents on repeated impact load.

Damage evolution and strength attenuation characteristics of carbonaceous slate under low velocity dynamic impact

Rock is subjected to impact loading during tunnel and subsurface engineering.For understanding the damage evolution of rock under dynamic impact, mechanical research was performed on the carboniferous slate surrounding the Muzhailing tunnel under different influencing factors based on the Split Hopkinson Pressure Bar(SHPB)experimental system. The results show that:(1)carbonaceous slate exhibits a continuous failure process, which develops more rapidly in the presence of joints;simultaneously, a negative correlation was found between the joint density and the dynamic strength of rock;(2) under different impact velocities and wavelengths, the method of using incident energy to represent the dynamic damage threshold of carbonaceous slate under high in situ stress was proposed based on the kinetic energy theorem, and the damage threshold of carbonaceous slate was calculated to be 53 J;(3) impact times is the most critical core variable and negatively correlated with peak strength and positively correlated with strain rate, maximum strain, and cumulative damage. The carbonaceous slate is subjected to repeated load impacts, which is followed by accumulation of damage, continuous strength attenuation, and internal dominant fracture expansion. In particular,when the samples break, there is only one main rupture surface, which is the most significant difference from the single impact rupture form.

Dynamic Mechanical Behaviour of Ultra-high Performance Fiber Reinforced Concretes

Ultra-high performance fiber reinforced concretes （UHPFRC） were prepared by replacing 60% of cement with ultra-fine industrial waste powder. The dynamic mechanical behaviour of UHPFRC with different fiber volume fraction was researched on repeated compressive impact in four kinds of impact modes through split Hopkinson pressure bar （SHPB）. The experimental results show that the peak stress and elastic modulus decrease and the strain rate and peak strain increase gradually with the increasing of impact times. The initial material damage increases and the peak stress of the specimen decreases from the second impact with the increasing of the initial incident wave. Standard strength on repeated impact is defined to compare the ability of resistance against repeated impact among different materials. The rate of reduction of standard strength is decreased by fiber reinforcement under repeated impact. The material damage is reduced and the ability of repeated impact resistance of UHPFRC is improved with the increasing of fiber volume fraction.