Triangular Au-Ag framework nanostructures （TFN） were synthesized via a multi-step galvanic replacement reaction （MGRR） of single-crystalline triangular silver nanoplates in a chlorauric acid （HAuCl4） solution at...Triangular Au-Ag framework nanostructures （TFN） were synthesized via a multi-step galvanic replacement reaction （MGRR） of single-crystalline triangular silver nanoplates in a chlorauric acid （HAuCl4） solution at room temperature. The morphological, compositional, and crystal structural changes involved with reaction steps were analyzed by using transmission electron microscopy（TEM）, energy-dispersive X-ray spectrometry （EDX）, and X-ray diffraction. TEM combined with EDX and selected area electron diffraction confirmed the replacement of Ag with Au. The in-plane dipolar surface plasmon resonance （SPR） absorption band of the Ag nanoplates locating initially at around 700 nm gradually redshifted to 1 100 nm via a multi-stage replacement manner after 7 stages. The adding amount of HAuCl4 per stage influenced the average redshift value per stage, thus enabled a fine tuning of the in-plane dipolar band. A proposed formation mechanism of the original Ag nanoplates developing pores while growing Au nanoparticles covering this underlying structure at more reaction steps was confirmed by exploiting surface-enhanced Raman scattering （SERS）.展开更多
Total joint replacements(TJR) have been a huge success for orthopaedic surgery in the past century and are gaining increasing importance today due to the aging population. However, the short longevity of artificial jo...Total joint replacements(TJR) have been a huge success for orthopaedic surgery in the past century and are gaining increasing importance today due to the aging population. However, the short longevity of artificial joints is one of the major problems in bioimplant industry and needs to be rectified since an increasing number of young people, with more active lifestyles, must receive TJR. Wear mechanisms are discussed in this paper to describe the root causes of the failures and to give some general ideas to increase the lifespan of artificial joints. The suitable material combination is of great importance for the wear resistance of bioimplants, and bioceramics will exert a crucial effect in their future progress. Other materials, such as metal alloys and polymers, are also discussed in this paper. Surface finish is another factor affecting the tribological performance of bioimplants. In recent years, surface texture technology has fascinated many researchers, and a good design of texture pattern requires a comprehensive understanding of wear mechanisms, material properties, and dynamic fluid theory. This review also covers a summary of in vitro wear tests, including simulators, lubricant, and testing parameters.展开更多
A new method for design of turbomachinery blades is presented. The parameters of a compressor blade are created from the Computational Fluid Dynamics （CFD） software CFX-BladeGen, and are inputted to the Computer Aid...A new method for design of turbomachinery blades is presented. The parameters of a compressor blade are created from the Computational Fluid Dynamics （CFD） software CFX-BladeGen, and are inputted to the Computer Aided Design （CAD） software UG for building a curve surface model to create an entity model in UG. The result shows that the blade model is favorable from the entity effect and reflection analysis and the model process is useful for the CAD model creation of turbomachinery blades.展开更多
In order to understand the effect of powders ground from reactive sandstone replacing cement on reducing or suppressing alkali-silica reaction（ASR）, and to identify the mechanism of suppressing ASR by this powders, ...In order to understand the effect of powders ground from reactive sandstone replacing cement on reducing or suppressing alkali-silica reaction（ASR）, and to identify the mechanism of suppressing ASR by this powders, mortar and paste containing reactive sandstone powders of four replacement levels ranging from 10wt% to 40wt% and four specific surfaces areas ranging from 210 m^2/kg to 860 m^2/kg were studied. The experimental results showed that incorporation of 40wt% reactive sandstone powders could suppress ASR effectively except for mortar containing reactive sandstone powders with specific surface area of 610 m^2/kg, which disagreed with the most results reported that the higher reactive powder specific surface area, the smaller ASR expansion. By means of fl ame photometry, Fourier transform infrared spectroscopy（FT-IR） and thermo gravimetric analysis（TG）, the mechanism of reactive sandstone powders on reducing or suppressing ASR was soluble alkalis type of reactive sandstone powders and the competition of liberating and bonding alkali of cement paste containing reactive sandstone powders,when the ability of alkali bonding was greater than the ability of alkali liberation, ASR caused by reactive sandstone was supressed effectively.展开更多
基金Project(10804101)supported by the National Natural Science Foundation of ChinaProject(2007CB815102)supported by the National Basic Research Program of ChinaProject(2007B08007)supported by the Science and Technology Development Foundation of Chinese Academy of Engineering Physics,China
文摘Triangular Au-Ag framework nanostructures （TFN） were synthesized via a multi-step galvanic replacement reaction （MGRR） of single-crystalline triangular silver nanoplates in a chlorauric acid （HAuCl4） solution at room temperature. The morphological, compositional, and crystal structural changes involved with reaction steps were analyzed by using transmission electron microscopy（TEM）, energy-dispersive X-ray spectrometry （EDX）, and X-ray diffraction. TEM combined with EDX and selected area electron diffraction confirmed the replacement of Ag with Au. The in-plane dipolar surface plasmon resonance （SPR） absorption band of the Ag nanoplates locating initially at around 700 nm gradually redshifted to 1 100 nm via a multi-stage replacement manner after 7 stages. The adding amount of HAuCl4 per stage influenced the average redshift value per stage, thus enabled a fine tuning of the in-plane dipolar band. A proposed formation mechanism of the original Ag nanoplates developing pores while growing Au nanoparticles covering this underlying structure at more reaction steps was confirmed by exploiting surface-enhanced Raman scattering （SERS）.
基金support from the Science Foundation Ireland (SFI) (Grant No. 15/ RP/B3208)the National Natural Science Foundation of China (NSFC) (Grant No. 51320105009 & 61635008)
文摘Total joint replacements(TJR) have been a huge success for orthopaedic surgery in the past century and are gaining increasing importance today due to the aging population. However, the short longevity of artificial joints is one of the major problems in bioimplant industry and needs to be rectified since an increasing number of young people, with more active lifestyles, must receive TJR. Wear mechanisms are discussed in this paper to describe the root causes of the failures and to give some general ideas to increase the lifespan of artificial joints. The suitable material combination is of great importance for the wear resistance of bioimplants, and bioceramics will exert a crucial effect in their future progress. Other materials, such as metal alloys and polymers, are also discussed in this paper. Surface finish is another factor affecting the tribological performance of bioimplants. In recent years, surface texture technology has fascinated many researchers, and a good design of texture pattern requires a comprehensive understanding of wear mechanisms, material properties, and dynamic fluid theory. This review also covers a summary of in vitro wear tests, including simulators, lubricant, and testing parameters.
文摘A new method for design of turbomachinery blades is presented. The parameters of a compressor blade are created from the Computational Fluid Dynamics （CFD） software CFX-BladeGen, and are inputted to the Computer Aided Design （CAD） software UG for building a curve surface model to create an entity model in UG. The result shows that the blade model is favorable from the entity effect and reflection analysis and the model process is useful for the CAD model creation of turbomachinery blades.
基金Funded partly by the the National 973 Program of China(No.2013CB035901)the National Natural Science Foundation of China(No.51379163)
文摘In order to understand the effect of powders ground from reactive sandstone replacing cement on reducing or suppressing alkali-silica reaction（ASR）, and to identify the mechanism of suppressing ASR by this powders, mortar and paste containing reactive sandstone powders of four replacement levels ranging from 10wt% to 40wt% and four specific surfaces areas ranging from 210 m^2/kg to 860 m^2/kg were studied. The experimental results showed that incorporation of 40wt% reactive sandstone powders could suppress ASR effectively except for mortar containing reactive sandstone powders with specific surface area of 610 m^2/kg, which disagreed with the most results reported that the higher reactive powder specific surface area, the smaller ASR expansion. By means of fl ame photometry, Fourier transform infrared spectroscopy（FT-IR） and thermo gravimetric analysis（TG）, the mechanism of reactive sandstone powders on reducing or suppressing ASR was soluble alkalis type of reactive sandstone powders and the competition of liberating and bonding alkali of cement paste containing reactive sandstone powders,when the ability of alkali bonding was greater than the ability of alkali liberation, ASR caused by reactive sandstone was supressed effectively.
