Geological and Engineering‘Sweet Spots'in the Permian Lucaogou Formation,Jimusar Sag,Junggar Basin

Unconventional oil and gas resources require petrophysical logs to answer the question of how best to optimize geological and engineering‘sweet spots'.Therefore,the establishment of a key well with comprehensive descriptions of lithology,reservoir properties,hydrocarbon-bearing properties,electronic well log responses,source rock properties,brittleness,and in situ stress magnitude and direction is important for the effective exploration and production of unconventional hydrocarbon resources.Cores,thin sections,scanning electron microscopy(SEM)and comprehensive well log suites are used to build a key well for the Permian Lucaogou Formation,Jimusar Sag of the Junggar Basin.The results show that there are three main types of lithologies,including siltstone,mudstone and dolostone.Lithologies can be predicted using the combination of conventional well and image logs.The pore spaces consist of interparticle pores,intragranular dissolution pores and micropores.Nuclear Magnetic Resonance(NMR)T_(2)components longer than 1.7 ms are superposed as effective porosity.Permeability is calculated using the Coates model from NMR T_(2)spectra.The ratio of T_(2)components>7.0 ms to T_(2)components>0.3 ms is used to calculate oil saturation.TOC is calculated using theΔlog R method.Brittleness index is calculated using Poisson-Young's method,ranging from 13.42%-70.53%.In situ stress direction is determined,and in situ stress magnitudes(maximum horizontal stress SH_(max),minimum horizontal stress Sh_(min),vertical stress S_(v))are calculated using density and sonic logs.The strike-slip stress type(SH_(max)>S_(v)>Sh_(min))is encountered.The key well which comprehensively includes the above seven properties is established.Geological and engineering(geomechanical)‘sweet spots'are then optimized from the key well by fully analyzing lithology,reservoir property,oilbearing potential,in situ stress magnitude and brittleness.It is hoped that the results support engineers'and geologists'decisions for the future exploitation of unconventional hydrocarbon resources.

Diagenesis-porosity evolution and“sweet spot”distribution of low permeability reservoirs:A case study from Oligocene Zhuhai Formation in Wenchang A sag,Pear River Mouth Basin,northern South China Sea

The characteristics of low permeability reservoirs and distribution of sweet spots in the Oligocene Zhuhai Formation of Wenchang A sag, Pearl River Basin were investigated by core observation and thin section analysis. The study results show that there develop the fine, medium and coarse sandstone reservoirs of tidal flat–fan delta facies, which are of mostly low permeability and locally medium permeability. There are two kinds of pore evolution patterns: oil charging first and densification later, the reservoirs featuring this pattern are mainly in the third member of Zhuhai Formation between the south fault zone and the sixth fault zone, and the pattern of densification first and gas charging later is widespread across the study area. Strong compaction and local calcium cementation are the key factors causing low permeability of the reservoirs in the Zhuhai Formation. Thick and coarse grain sand sedimentary body is the precondition to form "sweet spot" reservoirs. Weak compaction and cementation, dissolution, early hydrocarbon filling and authigenic chlorite coating are the main factors controlling formation of "sweet spot" reservoir. It is predicted that there develop between the south fault and sixth fault zones the Class Ⅰ "sweet spot" in medium compaction zone, Class Ⅱ "sweet spot" in nearly strong compaction zone, Class Ⅲ "sweet spot" reservoir in the nearly strong to strong compaction zone with oil charging at early stage, and Class IV "sweet spot" reservoir in the strong compaction and authigenic chlorite coating protection zone in the sixth fault zone.