Possibilities for the synthesis of superheavy element Z=121 in fusion reactions

Based on the dinuclear system model,the calculated evaporation residue cross sections matched well with the current experimental results.The synthesis of superheavy elements Z=121 was systematically studied through combinations of stable projectiles with Z=21-30 and targets with half-lives exceeding 50 d.The influence of mass asymmetry and isotopic dependence on the projectile and target nuclei was investigated in detail.The reactions^(254)Es(^(46)Ti,3n)^(297)121 and^(252)Es(^(46)Ti,3n)^(295)121 were found to be experimentally feasible for synthesizing superheavy element Z=121,with maximal evaporation residue cross sections of 6.619 and 4.123 fb at 219.9 and 223.9 MeV,respectively.

Cr-induced fusion reactions to synthesize superheavy elements

We investigated ^(50,52-54)Cr-induced fusion reactions for the synthesis of the superheavy element in the 104≤Z≤122 range.The cross sections produced in this investigation using ^(54)Cr projectiles were compared with those obtained in prior experiments.The estimated cross sections from this analysis are consistent with the findings of prior studies.From the current study,the predicted cross section was found to be 42fb at 236 MeV for ^(53)Cr+^(243)Am,23.2 fb at 236 MeV for ^(54)Cr+^(247)Cm,95.6 fb at 240 MeV for ^(53)Cr+248Bk,and 1.33 fb at 242 MeV for ^(53)Cr+250Cf.Consequently,these projected cross sections with excitation energy and beam energy will be useful in future Cr-induced fusion reaction investigations.

Systematic study of the synthesis of heavy and superheavy nuclei in 48Ca-induced fusion-evaporation reactions

We systematically studied the evaporation residue cross sections of ^(48)Ca-induced reactions on lanthanide and actinide target nuclei under the Dinuclear System(DNS)model framework to check the reliability and applicability of the model.To produce new proton-rich Fl and Lv isotopes through hot fusion reactions in the superheavy element region with Z≥104,we utilized the reactions ^(48)Ca+^(236,238,239) Pu and ^(48)Ca+^(242,243,244,250) Cm.However,owing to the detection limit of available equipment(0.1 pb),only 283Fl and 287−289Lv,which have the maximum evaporation residue cross section values of 0.149,0.130,9.522,and 0.309 pb,respectively,can be produced.Furthermore,to produce neutron-deficient isotopes of actinides near the proton drip line with Z=93−100,we attempted to generate the new isotopes(224−227Pu,228−232,237Cm)using the reactions ^(48)Ca+180,182,183 W and ^(48)Ca+^(184,186,187,192) Os.The maximum evaporation residue cross section values are 0.07,0.06,0.26,and 0.30 nb for the former set of reactions,and 1.96 pb,5.73 pb,12.16 pb,19.39 pb,54.79 pb,and 6.45 nb for the latter,respectively.These results are expected to provide new information for the future synthesis of unknown neutron-deficient isotopes.

Roles of Isospin in Evaporation Residue Cross Section as a Probe of Nuclear Dissipation

The influence of isospin on the excess of evaporation residue cross section over its standard statistical-model value for nuclei ^194pb, ^200Pb, and ^206pb is studied via a Langevin equation coupled with a statistical decay model. The magnitude of this excess for a low-isospin fissioning nucleus is shown to be larger and its dependence on the nuclear viscosity coefficient to be stronger than those of a high-isospin fissioning nucleus. These results suggest that to obtain a more accurate information of viscosity coefficient inside the saddle point by measuring evaporation residue cross sections, we had better choose those compound systems with small isospin.

Influence of angular momentum on evaporation residue cross section as a probe of nuclear dissipation

By calculating the excess of the evaporation residue cross sections of the ^200Pb nucleus over that predicted by the standard statistical model as a function of nuclear viscosity coefficient using a Langevin equation combined with a statistical decay model, it is found that high angular momentum not only amplifies the dissipation effects on the excess of the evaporation residue cross sections, but also considerably increases the sensitivity of this excess to the nuclear viscosity coefficient. These results suggest that on the experimental side, to accurately obtain the information of nuclear dissipation inside the saddle point by measuring the evaporation residue cross section, it had better populate those compound systems with high spins.

Spin distribution of evaporation residue cross section within a stochastic approach

The Langevin equation including particle emission was used to reproduce the recently measured spin distribution of evaporation residue cross sections in the reaction ^16O＋^184W at beam energies of 84, 92, 100, 108, 116 and 120 MeV. By comparing the theoretical calculations with the experimental data, the validity of the stochastic approach to dissipative fission is verified. Moreover, a pre-saddle nuclear viscosity coefficient of 5×10^21 s^-1 is extracted.

Surveying the role of excitation energy in probing nuclear dissipation

A dynamical Langevin model is employed to calculate the excess of the evaporation residue cross sections of the ^194Pb nucleus over that predicted by the standard statistical model as a function of nuclear dissipation strength. It is shown that large excitation energy can increase the effects of nuclear dissipation on the excess of the evaporation residues and the sensitivity of this excess to the dissipation strength,and that more higher excitation energies have little contribution to further raising this sensitivity. These results suggest that on the experimental side,producing those compound systems with moderate excitation energy is sucient for a good determination of the pre-saddle nuclear dissipation strength by measuring the evaporation residue cross section,and that forming an extremely highly excited system does not considerably improve the sensitivity of evaporation residues to the dissipation strength.

Study of different features offission dynamics of ^(224)Th produced in fusion reactions within a stochastic approach

The evaporation residue cross section anisotropy of the fission fragment angular distribution, pre-scission neutron multiplicity and the pre-saddle and post-saddle contributions of the pre-scission neutron multiplicity were analyzed within a stochastic approach based on one-, two- and three-dimensional Langevin equations for the compound nucleus ^224Th formed via a complete fusion. In these calculations, dissipation was generated through the chaos weighted wall and window friction formula. Comparison of the theoretical results with the experimental data showed that three-dimensional Langevin equations with dissipation generated through the chaos weighted wall and window friction formula make it possible to reproduce satisfactorily the above-mentioned experimental data.