Effect of MSWI Fly Ash and Incineration Residues on Cement Performances

The activities of municipal solid waste incineration （MSWI） fly ash and incineration residues were studied contrastively, through the component analysis and the activity ratio tests. The mechanical properties, hydration mechanism and leaching toxicity of the hardened cement paste mixing with MSWI fly ash and incineration residues were investigated. The experimental results indicated that the active constituents （CaO＋Al2O3＋Fe2O3） in MSWI fly ash were higher than those in incineration residues. Therefore the activity ratio of MSWI fly ash was 43.58%, twice as much as that of incineration residues. Meanwhile, the hydration of cement was delayed by mixing with MSWI fly ash and incineration residues, which also reduced the cement strength markedly. By adding with exceeding 20% MSWI fly ash, the specimens expanded and microcracks appeared. The leaching toxicities of cement pasted mixed with MSWI fly ash and incineration residues were lower than the Chinese national standard. Accordingly the cement mixed by MSWI fly ash and incineration residues can be considered as the environment-friendly materials.

Characteristics and aluminum reuse of textile sludge incineration residues after acidification

The chemical composition and aluminum speciation of sludge incineration residue （SIR） were determined. Cementation of aluminum from sulfuric acid solution using SIR was studied. The results showed that acid-soluble inorganic aluminum was the predominant component in the sludge, and the total leached aluminum increased from 62.2% to 92.9% after incineration. Sulfuric acid dosage and reaction time were found to affect aluminum recovery positively. Conversely, the increase in temperature significantly inhibited recovery reactions. The optimized leaching condition was 1.66 g sulfuric acid per gram of SIR with a reaction time of 3 hr at 20°C, resulting in the highest aluminum leaching rate of 96.7%. Compared to commercial aluminum sulfate solution coagulants, the leaching solution demonstrated higher CODCr, turbidity and color removal efficiency for textile wastewater.

Distribution and leaching characteristics of trace elements in ashes as a function of different waste fuels and incineration technologies

Impact of waste fuels（virgin/waste wood, mixed biofuel（peat, bark, wood chips） industrial,household, mixed waste fuel） and incineration technologies on partitioning and leaching behavior of trace elements has been investigated. Study included 4 grate fired and 9 fluidized boilers. Results showed that mixed waste incineration mostly caused increased transfer of trace elements to fly ash; particularly Pb/Zn. Waste wood incineration showed higher transfer of Cr,As and Zn to fly ash as compared to virgin wood. The possible reasons could be high input of trace element in waste fuel/change in volatilization behavior due to addition of certain waste fractions. The concentration of Cd and Zn increased in fly ash with incineration temperature.Total concentration in ashes decreased in order of Zn 〉 Cu 〉 Pb 〉 Cr 〉 Sb 〉 As 〉 Mo. The concentration levels of trace elements were mostly higher in fluidized boilers fly ashes as compared to grate boilers（especially for biofuel incineration）. It might be attributed to high combustion efficiency due to pre-treatment of waste in fluidized boilers. Leaching results indicated that water soluble forms of elements in ashes were low with few exceptions.Concentration levels in ash and ash matrix properties（association of elements on ash particles）are crucial parameters affecting leaching. Leached amounts of Pb, Zn and Cr in 〉50% of fly ashes exceeded regulatory limit for disposal. 87% of chlorine in fly ashes washed out with water at the liquid to solid ratio 10 indicating excessive presence of alkali metal chlorides/alkaline earths.