This study investigated dissolution processes of cavitation bubbles generated during in vivo shock wave(SW)-induced treatments. Both active cavitation detection(ACD) and the B-mode imaging technique were applied t...This study investigated dissolution processes of cavitation bubbles generated during in vivo shock wave(SW)-induced treatments. Both active cavitation detection(ACD) and the B-mode imaging technique were applied to measure the dissolution procedure of bi Spheres contrast agent bubbles by in vitro experiments. Besides, the simulation of SW-induced cavitation bubbles dissolution behaviors detected by the B-mode imaging system during in vivo SW treatments, including extracorporeal shock wave lithotripsy(ESWL) and extracorporeal shock wave therapy(ESWT), were carried out based on calculating the integrated scattering cross-section of dissolving gas bubbles with employing gas bubble dissolution equations and Gaussian bubble size distribution. The results showed that(i) B-mode imaging technology is an effective tool to monitor the temporal evolution of cavitation bubbles dissolution procedures after the SW pulses ceased, which is important for evaluation and controlling the cavitation activity generated during subsequent SW treatments within a treatment period;(ii) the characteristics of the bubbles, such as the bubble size distribution and gas diffusion, can be estimated by simulating the experimental data properly.展开更多
Analysis of tidal current and sea level has been made based on the observations from the summer of 2006 to the winter of 2007,respectively.The result indicates that a two-layer structure of residual current exists in ...Analysis of tidal current and sea level has been made based on the observations from the summer of 2006 to the winter of 2007,respectively.The result indicates that a two-layer structure of residual current exists in summer,with its upper layer going northwestward and the lower layer southeastward.In addition,some strong residuals exist in the neighboring depth of the pycnocline during the current period of astronomical tide.In winter,except some individual layersthe residual currents mostly direct to the northwest,from which we can see the fluctuation of abnormal sea-level and the appearance of associated current because of the changes of the wind field.The analysis of tidal ellipse indicates that the direction of the maximum semidiurnal component is clockwise from summer to winter,with an angle of 16-18.Moreover,in summer the semidiurnal component rotates with depth clockwise while the diurnal component counterclockwise.However,the vertical structure is almost homogeneous in winter.展开更多
In regions of complex geology and tectonic assembly, strong motion seismic arrival time records can be used to test the plausibility of existing hypothesis about the origin of lithological and tectonic features and ho...In regions of complex geology and tectonic assembly, strong motion seismic arrival time records can be used to test the plausibility of existing hypothesis about the origin of lithological and tectonic features and how they are related in space and time. In this study we use differential travel time residuals at some strong motion accelerographic stations in the Medellin-Aburra Valley, in the northern Central Cordillera of the Colombian Andes, to discuss some aspects of the geological configuration. We based our work on the hypothesis that the differences between seismic travel time residuals among pairs of stations are a function of the differences in the surface geology and the near-surface upper crustal configuration. Our results are consistent with the volcanic rocks of the Quebradagrande Complex being less mafic, more weathered or more tectonically affected than previously thought, with the presence of a relatively thin dunite body on top of the metamorphic basement, and with a large lateral heterogeneity in the mainly mafic San Diego Stock.展开更多
Laser shock peening(LSP) is an innovative surface treatment method,which has been shown to greatly improve the fatigue life of many metallic components.This work investigates surface integrity of TC17 titanium alloy...Laser shock peening(LSP) is an innovative surface treatment method,which has been shown to greatly improve the fatigue life of many metallic components.This work investigates surface integrity of TC17 titanium alloy treated by LSP with innovative square laser spot.Nd:glass laser with duration of 30 ns and spot size of 4 mm×4 mm is applied.The surface morphology and surface residual stress of the TC17 titanium alloy,treated with varying peening parameters such as laser power density and overlapping ratio,have been studied in detail.The results show that laser pulse energy greatly influences surface morphology and surface residual stress around single-spot treated areas,and compressive residual stresses are saturated as laser pulse energy is over 55 J.There are significantly different surface morphologies and residual stress distributions at the overlapped areas with different overlapping ratios.A relative smooth surface is produced with uniform compressive residual stress distribution at an overlapping ratio of 8 %.The experiment of residual stress relaxation is implemented by measuring residual stress at the center of four overlapped spots and by four point bending fatigue test at the frequency of 105 Hz.The compressive residual stresses induced by LSP are found to relax quite slowly under cyclic fatigue loading.展开更多
基金Project partially supported by the National Natural Science Foundation of China(Grant Nos.81627802,81473692,81673995,11374155,11574156,11474001,11474161,11474166,and 11674173)Natural Science Foundation of Jiangsu Province,China(Grant No.BK20151007)the Qing Lan Project of Jiangsu Province,China
文摘This study investigated dissolution processes of cavitation bubbles generated during in vivo shock wave(SW)-induced treatments. Both active cavitation detection(ACD) and the B-mode imaging technique were applied to measure the dissolution procedure of bi Spheres contrast agent bubbles by in vitro experiments. Besides, the simulation of SW-induced cavitation bubbles dissolution behaviors detected by the B-mode imaging system during in vivo SW treatments, including extracorporeal shock wave lithotripsy(ESWL) and extracorporeal shock wave therapy(ESWT), were carried out based on calculating the integrated scattering cross-section of dissolving gas bubbles with employing gas bubble dissolution equations and Gaussian bubble size distribution. The results showed that(i) B-mode imaging technology is an effective tool to monitor the temporal evolution of cavitation bubbles dissolution procedures after the SW pulses ceased, which is important for evaluation and controlling the cavitation activity generated during subsequent SW treatments within a treatment period;(ii) the characteristics of the bubbles, such as the bubble size distribution and gas diffusion, can be estimated by simulating the experimental data properly.
基金The Public Science and Technology Research Funds Projects of Ocean under contract Nos 200905001 and 201005019the State Basic Research Program of China under contract No.2005CB422303the National Natural Science Foundation of China under contract No.41006002
文摘Analysis of tidal current and sea level has been made based on the observations from the summer of 2006 to the winter of 2007,respectively.The result indicates that a two-layer structure of residual current exists in summer,with its upper layer going northwestward and the lower layer southeastward.In addition,some strong residuals exist in the neighboring depth of the pycnocline during the current period of astronomical tide.In winter,except some individual layersthe residual currents mostly direct to the northwest,from which we can see the fluctuation of abnormal sea-level and the appearance of associated current because of the changes of the wind field.The analysis of tidal ellipse indicates that the direction of the maximum semidiurnal component is clockwise from summer to winter,with an angle of 16-18.Moreover,in summer the semidiurnal component rotates with depth clockwise while the diurnal component counterclockwise.However,the vertical structure is almost homogeneous in winter.
文摘In regions of complex geology and tectonic assembly, strong motion seismic arrival time records can be used to test the plausibility of existing hypothesis about the origin of lithological and tectonic features and how they are related in space and time. In this study we use differential travel time residuals at some strong motion accelerographic stations in the Medellin-Aburra Valley, in the northern Central Cordillera of the Colombian Andes, to discuss some aspects of the geological configuration. We based our work on the hypothesis that the differences between seismic travel time residuals among pairs of stations are a function of the differences in the surface geology and the near-surface upper crustal configuration. Our results are consistent with the volcanic rocks of the Quebradagrande Complex being less mafic, more weathered or more tectonically affected than previously thought, with the presence of a relatively thin dunite body on top of the metamorphic basement, and with a large lateral heterogeneity in the mainly mafic San Diego Stock.
基金Subject in Advance of General Armament Department(813040405-1)
文摘Laser shock peening(LSP) is an innovative surface treatment method,which has been shown to greatly improve the fatigue life of many metallic components.This work investigates surface integrity of TC17 titanium alloy treated by LSP with innovative square laser spot.Nd:glass laser with duration of 30 ns and spot size of 4 mm×4 mm is applied.The surface morphology and surface residual stress of the TC17 titanium alloy,treated with varying peening parameters such as laser power density and overlapping ratio,have been studied in detail.The results show that laser pulse energy greatly influences surface morphology and surface residual stress around single-spot treated areas,and compressive residual stresses are saturated as laser pulse energy is over 55 J.There are significantly different surface morphologies and residual stress distributions at the overlapped areas with different overlapping ratios.A relative smooth surface is produced with uniform compressive residual stress distribution at an overlapping ratio of 8 %.The experiment of residual stress relaxation is implemented by measuring residual stress at the center of four overlapped spots and by four point bending fatigue test at the frequency of 105 Hz.The compressive residual stresses induced by LSP are found to relax quite slowly under cyclic fatigue loading.