As the important matrix material,epoxy resin has been widely used in the composites for various fields.On account of the poor toughness of epoxy resin limiting their suitability for advanced applications,considerable ...As the important matrix material,epoxy resin has been widely used in the composites for various fields.On account of the poor toughness of epoxy resin limiting their suitability for advanced applications,considerable interests have been conducted to modify the epoxy resin to meet the engineering requirements.In this study,the bio-based polyurethane(PU)modified resin was adopted to modify the pure bisphenol-A epoxy by blending method with various proportions.Aiming to illuminate the curing behavior,mechanical and thermal properties,the blended epoxy systems were characterized by viscosity-time analysis,dynamic mechanical analysis(DMA)at different frequencies and temperatures,mechanical tensile test,thermogravimetric analysis(TGA)and Fourier transform infrared(FT-IR)spectroscopy.The results indicated that the introduction of PU modified epoxy was found to significantly inhibit the viscosity growth rates especially when the content of PU modified epoxy resin is higher than 60%.Notwithstanding the dynamic modulus and T_(g)reduced with the increment of PU modified epoxy,remarkable increment on the elongation at break was found and the flexibility was greatly promoted with the introduction of PU modified epoxy.The proportion of PU modified epoxy in the blends should be put balance considerations to obtain optimal mechanical properties.TGA results and FTIR spectrum demonstrated that the addition of PU modified epoxy did not change the thermal decomposition mechanism and chemical reaction mechanism,but the addition of PU modified epoxy inhibits the curing reaction of epoxy resin by measured and calculated the damping temperature domainT from 35.7℃ to 48.9℃.展开更多
Many factors that affect the flame resistance of the modified BMIsystem were studied, including the effect of different content ofP_4, C_24H_29Cl_21/ZnO_3B_2o_3·5H_2O and C_24H_29Cl_21/MoO_3 onOxygen Index of the...Many factors that affect the flame resistance of the modified BMIsystem were studied, including the effect of different content ofP_4, C_24H_29Cl_21/ZnO_3B_2o_3·5H_2O and C_24H_29Cl_21/MoO_3 onOxygen Index of the modified Bismaleimide resin. The thermalstability and mechanical properties of the cured BMI resin were alsomeasured. It showed that this new kind of modified bismaleimide resinhad nice fire resistance, excellent thermal stability and mechanicalproperties.展开更多
The selective water plugging agent was prepared by heating the blends of the polyacry-lamide inverse latex, modified urea formaldehyde resin, crosslinking agent and catalysts.The results show that using different type...The selective water plugging agent was prepared by heating the blends of the polyacry-lamide inverse latex, modified urea formaldehyde resin, crosslinking agent and catalysts.The results show that using different types of polymers and additives or changing in theirproportion of the blends, the gelling viscosity, starting point of gelling and other propertiesof the IPN can be controlled.展开更多
In order to reduce the cost and to improve the low temperature bonding strength of phenol formaldehyde resin( PF),the lignin modified phenol formaldehyde resin( LPF) was synthesized using calcium lignosulfonate as...In order to reduce the cost and to improve the low temperature bonding strength of phenol formaldehyde resin( PF),the lignin modified phenol formaldehyde resin( LPF) was synthesized using calcium lignosulfonate as a partial replacement of phenol,and sodium hydroxide as catalyzer. Then the magnesia carbon bricks were prepared using the LPF as binder. Different process conditions of LPFs such as calcium lignosulfonate additions( 10%,20%,30%,40% and 50%,in mass,the same hereinafter),catalyzer additions( extra added,1%,2%,3%,4% and 5%) and reaction times( 1,1. 5,2,2. 5 and 3 h) were investigated. Effects of prepared LPFs on properties of magnesia carbon bricks( baked at 200 ℃ for 24 h) were researched in order to modify the synthesizing conditions of LPFs. Cold physical properties and hot modulus of rupture of magnesia carbon bricks bonded by LPF and by traditional PF after baked at 200 ℃ for 24 h and fired at 1 200 ℃ for 3 h were compared,respectively. The results show that the optimal synthesizing conditions of LPF for preparing magnesia carbon bricks are 30% calcium lignosulfonate,1% catalyzer,and 2 h reaction time. The magnesia carbon bricks bonded by the optimal LPF achieve:( 1) the bulk densities 2. 84 g · cm- 3and 2. 82g·cm- 3,apparent porosities 9. 6% and 14. 6%,moduli of rupture 17. 8 MPa and 6. 4 MPa,crushing strengths72. 3 MPa and 48. 7 MPa,after baked at 200 ℃ and1 200 ℃,respectively;( 2) the hot modulus of rupture7. 3 MPa after fired at 1 400 ℃. The above properties are better than those of the magnesia carbon brick bonded by PF.展开更多
Refractory dissolved organic matter (DOM) from landfill leachate treatment plant was with high dissolved organic carbon (DOC) content. An aminated polymeric adsorbent NDA-8 with tertiary amino groups and sufficien...Refractory dissolved organic matter (DOM) from landfill leachate treatment plant was with high dissolved organic carbon (DOC) content. An aminated polymeric adsorbent NDA-8 with tertiary amino groups and sufficient mesopore was synthesized, which exhibited high adsorption capacity to the DOM (raw water after coagulation). Resin NDA-8 performed better in the uptake of the DOM than resin DAX-8 and A100. Electrostatic attraction was considered as the decisive interaction between the adsorbent and adsorbate. Special attention was paid to the correlation between porous structure and adsorption capacity. The mesopore of NDA-8 played a crucial role during uptake of the DOM. In general, resin in chloride form performed a higher removal rate of DOC. According to the colunm adsorption test, total adsorption capacity of NDA-8 was calculated to 52.28 mg DOC/mL wet resin. 0.2 mol/L sodium hydroxide solution could regenerate the adsorbent efficiently.展开更多
Epoxy-based composites containing montmorillonite(MMT) modified by silylation reaction with γ-aminopropyltriethoxysilane(γ-APTES) and 3-(glycidyloxypropyl) trimethoxysilane(GPTMS) are successfully prepared.T...Epoxy-based composites containing montmorillonite(MMT) modified by silylation reaction with γ-aminopropyltriethoxysilane(γ-APTES) and 3-(glycidyloxypropyl) trimethoxysilane(GPTMS) are successfully prepared.The effects of filler loading and surface modification on the electrical and thermal properties of the epoxy/MMT composites are investigated. Compared with the pure epoxy resin, the epoxy/MMT composite, whether MMT is surface-treated or not, shows low dielectric permittivity, low dielectric loss, and enhanced dielectric strength. The MMT in the epoxy/MMT composite also influences the thermal properties of the composite by improving the thermal conductivity and stability.Surface functionalization of MMT not only conduces to the better dispersion of the nanoparticles, but also significantly affects the electric and thermal properties of the hybrid by influencing the interfaces between MMT and epoxy resin.Improved interfaces are good for enhancing the electric and thermal properties of nanocomposites. What is more, the MMT modified with GPTMS rather than γ-APTES is found to have greater influence on improving the interface between the MMT filler and polymer matrices, thus resulting in lower dielectric loss, lower electric conductivity, higher breakdown strength, lower thermal conductivity, and higher thermal stability.展开更多
In this work, low-temperature vulcanized, transparent silane modified epoxy resins for LED filament bulb package were prepared. Firstly, transparent silane modified epoxy resins were produced through a controllable so...In this work, low-temperature vulcanized, transparent silane modified epoxy resins for LED filament bulb package were prepared. Firstly, transparent silane modified epoxy resins were produced through a controllable sol-gel method using γ-(2,3-epoxypropoxy)propytrimethoxysilane and dimethyldiethoxylsilane. The features of the reaction were investigated and the products were characterized in detail. Subsequently, various curing agents were explored to prepare transparent silane modified epoxy resins. The silane modified epoxy resins cured by PEA-230 at a fairly low temperature(40 °C/2 h then 60 °C/1 h) exhibited excellent thermal stability with a thermal degradation temperature as high as 316.5 °C and adjustable hardness between 40-60 shore A. The application tests showed the materials obtained were good candidates for LED filament bulb package.展开更多
基金The authors acknowledge the financial support of the National Natural Science Foundation of China(No.51908330)the Qilu Young Scholars Program of Shandong University,Natural Science Foundation of Shandong Province(CN)(No.ZR2020ME244),the Fundamental Research Funds of Shandong University(No.2020GN059)the Fundamental Research Funds for the Central Universities,CHD(No.300102210502)and Scientific Research Project of Shandong High-speed Group Co.,Ltd.,(No.SDGS-KJCX-2020-006-08).
文摘As the important matrix material,epoxy resin has been widely used in the composites for various fields.On account of the poor toughness of epoxy resin limiting their suitability for advanced applications,considerable interests have been conducted to modify the epoxy resin to meet the engineering requirements.In this study,the bio-based polyurethane(PU)modified resin was adopted to modify the pure bisphenol-A epoxy by blending method with various proportions.Aiming to illuminate the curing behavior,mechanical and thermal properties,the blended epoxy systems were characterized by viscosity-time analysis,dynamic mechanical analysis(DMA)at different frequencies and temperatures,mechanical tensile test,thermogravimetric analysis(TGA)and Fourier transform infrared(FT-IR)spectroscopy.The results indicated that the introduction of PU modified epoxy was found to significantly inhibit the viscosity growth rates especially when the content of PU modified epoxy resin is higher than 60%.Notwithstanding the dynamic modulus and T_(g)reduced with the increment of PU modified epoxy,remarkable increment on the elongation at break was found and the flexibility was greatly promoted with the introduction of PU modified epoxy.The proportion of PU modified epoxy in the blends should be put balance considerations to obtain optimal mechanical properties.TGA results and FTIR spectrum demonstrated that the addition of PU modified epoxy did not change the thermal decomposition mechanism and chemical reaction mechanism,but the addition of PU modified epoxy inhibits the curing reaction of epoxy resin by measured and calculated the damping temperature domainT from 35.7℃ to 48.9℃.
基金Funded by the Ministry of National Defense Industry.
文摘Many factors that affect the flame resistance of the modified BMIsystem were studied, including the effect of different content ofP_4, C_24H_29Cl_21/ZnO_3B_2o_3·5H_2O and C_24H_29Cl_21/MoO_3 onOxygen Index of the modified Bismaleimide resin. The thermalstability and mechanical properties of the cured BMI resin were alsomeasured. It showed that this new kind of modified bismaleimide resinhad nice fire resistance, excellent thermal stability and mechanicalproperties.
文摘The selective water plugging agent was prepared by heating the blends of the polyacry-lamide inverse latex, modified urea formaldehyde resin, crosslinking agent and catalysts.The results show that using different types of polymers and additives or changing in theirproportion of the blends, the gelling viscosity, starting point of gelling and other propertiesof the IPN can be controlled.
基金New Century Excellent Talents Program of Ministry of Education ( NCET - 09 - 0137 )The open foundation of the State Key Laboratory of Refractories and Metallurgy ( 2014QN17 )
文摘In order to reduce the cost and to improve the low temperature bonding strength of phenol formaldehyde resin( PF),the lignin modified phenol formaldehyde resin( LPF) was synthesized using calcium lignosulfonate as a partial replacement of phenol,and sodium hydroxide as catalyzer. Then the magnesia carbon bricks were prepared using the LPF as binder. Different process conditions of LPFs such as calcium lignosulfonate additions( 10%,20%,30%,40% and 50%,in mass,the same hereinafter),catalyzer additions( extra added,1%,2%,3%,4% and 5%) and reaction times( 1,1. 5,2,2. 5 and 3 h) were investigated. Effects of prepared LPFs on properties of magnesia carbon bricks( baked at 200 ℃ for 24 h) were researched in order to modify the synthesizing conditions of LPFs. Cold physical properties and hot modulus of rupture of magnesia carbon bricks bonded by LPF and by traditional PF after baked at 200 ℃ for 24 h and fired at 1 200 ℃ for 3 h were compared,respectively. The results show that the optimal synthesizing conditions of LPF for preparing magnesia carbon bricks are 30% calcium lignosulfonate,1% catalyzer,and 2 h reaction time. The magnesia carbon bricks bonded by the optimal LPF achieve:( 1) the bulk densities 2. 84 g · cm- 3and 2. 82g·cm- 3,apparent porosities 9. 6% and 14. 6%,moduli of rupture 17. 8 MPa and 6. 4 MPa,crushing strengths72. 3 MPa and 48. 7 MPa,after baked at 200 ℃ and1 200 ℃,respectively;( 2) the hot modulus of rupture7. 3 MPa after fired at 1 400 ℃. The above properties are better than those of the magnesia carbon brick bonded by PF.
基金supported by the Hi-Tech Re-search and Development Program (863) of China (No.2006AA06Z283)the National Natural Science Foundation of China (No. 50778088)the Sino-Germany Scientific and Technical Cooperation Project of Jiangsu Province (No.BZ2007020)
文摘Refractory dissolved organic matter (DOM) from landfill leachate treatment plant was with high dissolved organic carbon (DOC) content. An aminated polymeric adsorbent NDA-8 with tertiary amino groups and sufficient mesopore was synthesized, which exhibited high adsorption capacity to the DOM (raw water after coagulation). Resin NDA-8 performed better in the uptake of the DOM than resin DAX-8 and A100. Electrostatic attraction was considered as the decisive interaction between the adsorbent and adsorbate. Special attention was paid to the correlation between porous structure and adsorption capacity. The mesopore of NDA-8 played a crucial role during uptake of the DOM. In general, resin in chloride form performed a higher removal rate of DOC. According to the colunm adsorption test, total adsorption capacity of NDA-8 was calculated to 52.28 mg DOC/mL wet resin. 0.2 mol/L sodium hydroxide solution could regenerate the adsorbent efficiently.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.21806129,51872238,51407134,and 51521065)the China Postdoctoral Science Foundation(Grant No.2016M590619)+3 种基金the Natural Science Foundation of Shandong Province,China(Grant No.ZR2016EEQ28)the State Key Laboratory of Electrical Insulation and Power Equipment,China(Grant No.EIPE14107)the Fundamental Research Funds for the Central Universities,China(Grant No.3102018zy045)the Natural Science Basic Research Plan in Shaanxi Province,China(Grant No.2017JQ5116)
文摘Epoxy-based composites containing montmorillonite(MMT) modified by silylation reaction with γ-aminopropyltriethoxysilane(γ-APTES) and 3-(glycidyloxypropyl) trimethoxysilane(GPTMS) are successfully prepared.The effects of filler loading and surface modification on the electrical and thermal properties of the epoxy/MMT composites are investigated. Compared with the pure epoxy resin, the epoxy/MMT composite, whether MMT is surface-treated or not, shows low dielectric permittivity, low dielectric loss, and enhanced dielectric strength. The MMT in the epoxy/MMT composite also influences the thermal properties of the composite by improving the thermal conductivity and stability.Surface functionalization of MMT not only conduces to the better dispersion of the nanoparticles, but also significantly affects the electric and thermal properties of the hybrid by influencing the interfaces between MMT and epoxy resin.Improved interfaces are good for enhancing the electric and thermal properties of nanocomposites. What is more, the MMT modified with GPTMS rather than γ-APTES is found to have greater influence on improving the interface between the MMT filler and polymer matrices, thus resulting in lower dielectric loss, lower electric conductivity, higher breakdown strength, lower thermal conductivity, and higher thermal stability.
基金financial support from the Zhejiang Provincial Natural Science Foundation of China (No.Y14E030008)the Commonweal Technology Application Research Project of Zhejiang Province (No.2013C31079)
文摘In this work, low-temperature vulcanized, transparent silane modified epoxy resins for LED filament bulb package were prepared. Firstly, transparent silane modified epoxy resins were produced through a controllable sol-gel method using γ-(2,3-epoxypropoxy)propytrimethoxysilane and dimethyldiethoxylsilane. The features of the reaction were investigated and the products were characterized in detail. Subsequently, various curing agents were explored to prepare transparent silane modified epoxy resins. The silane modified epoxy resins cured by PEA-230 at a fairly low temperature(40 °C/2 h then 60 °C/1 h) exhibited excellent thermal stability with a thermal degradation temperature as high as 316.5 °C and adjustable hardness between 40-60 shore A. The application tests showed the materials obtained were good candidates for LED filament bulb package.