Exploiting new concepts for dense, fast, and nonvolatile random access memory with reduced energy consump- tion is a significant issue for information technology. Here we design an ＇electrically written and optically...Exploiting new concepts for dense, fast, and nonvolatile random access memory with reduced energy consump- tion is a significant issue for information technology. Here we design an ＇electrically written and optically read＇ information storage device employing BiFeO3/A u heterostruetures with strong absorption resonance. The electro- optic effect is the basis for the device design, which arises from the strong absorption resonance in BiFeO3/Au heterostructures and the electrically tunable significant birefringence of the BiFeO3 film. We first construct a sim- ulation calculation of the BiFeO3/Au structure spectrum and identify absorption resonance and electro-optical modulation characteristics. Following a micro scale partition, the surface reflected light intensity of different polarization units is calculated. The results depend on electric polarization states of the BiFeO3 film, thus BiFeO3/Au heterostructures can essentially be designed as a type of electrically written and optically read infor- mation storage device by utilizing the scanning near-field optical microscopy technology based on the conductive silicon cantilever tip with nanofabricated aperture. This work will shed light on information storage technology.展开更多
Objective To compare the cupric ion releasing in vitro o.f the three IUDs. Methods The stability o.f cupric ion releasing o.f IUDs including TCu 380.4 IUD （TCu 380A）, Multiload Cu375 IUD （MCu 375） and Yuangong 365...Objective To compare the cupric ion releasing in vitro o.f the three IUDs. Methods The stability o.f cupric ion releasing o.f IUDs including TCu 380.4 IUD （TCu 380A）, Multiload Cu375 IUD （MCu 375） and Yuangong 365 copper-bearing indomethacin-releasing IUD （Yuangong 365） by the determination of cupric ion releasing in simulated uterine fluid. The simulated uterine fluid was used for releasing media. Copper ion was determined by flame atomic absorption spectrometer. Results The cupric ion releasing of three IUDs were instable at the beginning and tend to be stable gradually. In the stable phase, the average level of cupric ion releasing of TCu380A, MCu375 and Yuangong 365 were 4.25±2.71-7.62±6.42 μg, 4.92±1.23 -8.62±3.08 μg and 2.19±0.40-4.68±1.66 μg, respectively. TCu380A had higher instable releasing level than those of Yuangong 365 （P〈0. 05）. Conclusion TCu 380.4 and MCu 375 showed a ＂burst release＂ during the first few days and the.former was of great significance（P〈0.05）. The initial cupric ion releasing of Yuangong 365 appeared to be the lowest, followed by MCu375 and TCu380A in a releasing order展开更多
Due to their potentials in light‐weight,flexible,and semitransparent devices,organic photovoltaics are of great significance in the field of renewable energy.However,the narrow intrinsic absorption spectrum of organi...Due to their potentials in light‐weight,flexible,and semitransparent devices,organic photovoltaics are of great significance in the field of renewable energy.However,the narrow intrinsic absorption spectrum of organic materials hinders the full utilization of solar energy.To fabricate a highly efficient opaque solar cell,it is greatly necessary to modify the optical properties of the device to improve light absorption.In addition,the growing interest in building‐integrated photovoltaics drives the development of semitransparent devices.The preparation of semitransparent solar cells with excellent performance imposes high requirements on the high efficiency and appropriate visible light transmittance of effective optical management.In this review,the recent research progress of optical management in organic photovoltaics is reviewed,including the design of light‐absorbing materials,the modification of different layers,adding a lighttrapping structure,and changing the light absorption capabilities of specific materials,so as to provide strategies of how to improve the performance of organic photovoltaic devices and present the prospect of the area.展开更多
A Series of all-optical devices are proposed based on nonlinear excited-stateabsorption and working at non-resonant frequency. Experimental and theoretical results obtainedwith C_(60) and metal-organic materials using...A Series of all-optical devices are proposed based on nonlinear excited-stateabsorption and working at non-resonant frequency. Experimental and theoretical results obtainedwith C_(60) and metal-organic materials using ns and ps laser at 532nm are presented.展开更多
The field of terahertz devices is important in terahertz technology.However,most of the current devices have limited functionality and poor performance.To improve device performance and achieve multifunctionality,we d...The field of terahertz devices is important in terahertz technology.However,most of the current devices have limited functionality and poor performance.To improve device performance and achieve multifunctionality,we designed a terahertz device based on a combination of VO_(2)and metamaterials.This device can be tuned using the phase-transition characteristics of VO_(2),which is included in the triple-layer structure of the device,along with SiO_(2)and Au.The terahertz device exhibits various advantageous features,including broadband coverage,high absorption capability,dynamic tunability,simple structural design,polarization insensitivity,and incidentangle insensitivity.The simulation results showed that by controlling the temperature,the terahertz device achieved a thermal modulation range of spectral absorption from 0 to 0.99.At 313 K,the device exhibited complete reflection of terahertz waves.As the temperature increased,the absorption rate also increased.When the temperature reached 353 K,the device absorption rate exceeded 97.7%in the range of 5-8.55 THz.This study used the effective medium theory to elucidate the correlation between conductivity and temperature during the phase transition of VO_(2).Simultaneously,the variation in device performance was further elucidated by analyzing and depicting the intensity distribution of the electric field on the device surface at different temperatures.Furthermore,the impact of various structural parameters on device performance was examined,offering valuable insights and suggestions for selecting suitable parameter values in real-world applications.These characteristics render the device highly promising for applications in stealth technology,energy harvesting,modulation,and other related fields,thus showcasing its significant potential.展开更多
常规的碳捕集与封存技术和碳捕集、利用与封存技术多针对固定源排放CO_(2),直接空气捕集CO_(2)(Direct Air Capture,DAC)技术作为一种新兴的负碳排放技术可对分布源排放的CO_(2)进行捕集,进一步降低全球大气CO_(2)体积分数。介绍了DAC...常规的碳捕集与封存技术和碳捕集、利用与封存技术多针对固定源排放CO_(2),直接空气捕集CO_(2)(Direct Air Capture,DAC)技术作为一种新兴的负碳排放技术可对分布源排放的CO_(2)进行捕集,进一步降低全球大气CO_(2)体积分数。介绍了DAC典型液体吸收工艺、固体吸附工艺的发展过程及相关示范项目建设情况,分析了新兴DAC工艺的技术特点,探讨了现有DAC工艺关键装置方案和未来发展趋势。DAC液体吸收工艺具有吸收剂原料成本较低、选择性较高的特点,可实现大规模连续化捕集,但再生过程中能耗较高。DAC固体吸附工艺具有模块化、投资成本较低的特点,且再生过程能耗相对较低,但需要定期对吸附材料更换和吸附设备维护,适用于较小规模的DAC应用场景。对2种典型DAC工艺吸收/吸附材料进行了概述。DAC电振荡吸附工艺中CO_(2)在固体电极中发生化学反应被捕集,并通过外加电场改变固体电极极性实现CO_(2)脱附,该工艺具有比基于热量或压力的分离过程更高的效率。空气中CO_(2)选择透过DAC分离膜从而实现了高效碳捕集。DAC变湿吸附工艺通过湿度的改变实现CO_(2)的吸脱附,突破了常规变温/变压吸附的高能耗限制等问题。DAC生物吸收工艺通过藻类生物的光合作用将CO_(2)吸收固定。基于双功能催化剂的DAC工艺可以在一个综合过程中实现CO_(2)的捕集与催化,节省了CO_(2)捕集后的运输与存储成本。DAC液体吸收工艺的关键装置为空气接触器、颗粒反应器、煅烧炉和熟化器,其中空气接触器开发的核心在于提高气液接触效率,减少喷淋过程中的水分损失和减轻设备腐蚀,颗粒反应器和熟化器开发的关键在于提高固液两相物料的接触效率以及反应后的固液分离效率。DAC固体吸附工艺由引风模块、吸附/再生模块、供能再生模块和CO_(2)压缩模块组成的模块化装置组成,其中优化吸附模块的核心在于提高气固传质速率、调谐CO_(2)捕集效率、降低压降;并基于不同应用场景工艺需求选择合适的再生系统或利用清洁能源,优化DAC工艺过程和开发高性能的DAC核心装置至关重要。展开更多
基金Supported by the National Natural Science Foundation of China under Grant No 11304384the Research Project of National University of Defense Technology under Grant No JC13-07-02
文摘Exploiting new concepts for dense, fast, and nonvolatile random access memory with reduced energy consump- tion is a significant issue for information technology. Here we design an ＇electrically written and optically read＇ information storage device employing BiFeO3/A u heterostruetures with strong absorption resonance. The electro- optic effect is the basis for the device design, which arises from the strong absorption resonance in BiFeO3/Au heterostructures and the electrically tunable significant birefringence of the BiFeO3 film. We first construct a sim- ulation calculation of the BiFeO3/Au structure spectrum and identify absorption resonance and electro-optical modulation characteristics. Following a micro scale partition, the surface reflected light intensity of different polarization units is calculated. The results depend on electric polarization states of the BiFeO3 film, thus BiFeO3/Au heterostructures can essentially be designed as a type of electrically written and optically read infor- mation storage device by utilizing the scanning near-field optical microscopy technology based on the conductive silicon cantilever tip with nanofabricated aperture. This work will shed light on information storage technology.
基金This study was supported by National Key Scientific and Technological Project(2004BA720A32)
文摘Objective To compare the cupric ion releasing in vitro o.f the three IUDs. Methods The stability o.f cupric ion releasing o.f IUDs including TCu 380.4 IUD （TCu 380A）, Multiload Cu375 IUD （MCu 375） and Yuangong 365 copper-bearing indomethacin-releasing IUD （Yuangong 365） by the determination of cupric ion releasing in simulated uterine fluid. The simulated uterine fluid was used for releasing media. Copper ion was determined by flame atomic absorption spectrometer. Results The cupric ion releasing of three IUDs were instable at the beginning and tend to be stable gradually. In the stable phase, the average level of cupric ion releasing of TCu380A, MCu375 and Yuangong 365 were 4.25±2.71-7.62±6.42 μg, 4.92±1.23 -8.62±3.08 μg and 2.19±0.40-4.68±1.66 μg, respectively. TCu380A had higher instable releasing level than those of Yuangong 365 （P〈0. 05）. Conclusion TCu 380.4 and MCu 375 showed a ＂burst release＂ during the first few days and the.former was of great significance（P〈0.05）. The initial cupric ion releasing of Yuangong 365 appeared to be the lowest, followed by MCu375 and TCu380A in a releasing order
基金This study was mostly supported by the National Key Researchand Development Program of China(Grant No.2017YFA0206600)the Key Research Program of FrontierScience,Chinese Academy of Sciences(Grant No.QYZDBSSW‐SLH006)+5 种基金the National Natural Science Foundation ofChina(Contract No.61674141,51972300,62011530022,and 21975245)the Strategic Priority Research Program ofChinese Academy of Sciences(Grant No.XDB43000000)Prof.Zhijie Wang appreciates support from the Hundred Talents Program(Chinese Academy of Sciences)Kong Liualso acknowledges the support from the Youth InnovationPromotion Associationthe Chinese Academy of Sciences(No.2020114)the NOVA of Beijing Science andTechnology(No.2020117).
文摘Due to their potentials in light‐weight,flexible,and semitransparent devices,organic photovoltaics are of great significance in the field of renewable energy.However,the narrow intrinsic absorption spectrum of organic materials hinders the full utilization of solar energy.To fabricate a highly efficient opaque solar cell,it is greatly necessary to modify the optical properties of the device to improve light absorption.In addition,the growing interest in building‐integrated photovoltaics drives the development of semitransparent devices.The preparation of semitransparent solar cells with excellent performance imposes high requirements on the high efficiency and appropriate visible light transmittance of effective optical management.In this review,the recent research progress of optical management in organic photovoltaics is reviewed,including the design of light‐absorbing materials,the modification of different layers,adding a lighttrapping structure,and changing the light absorption capabilities of specific materials,so as to provide strategies of how to improve the performance of organic photovoltaic devices and present the prospect of the area.
文摘A Series of all-optical devices are proposed based on nonlinear excited-stateabsorption and working at non-resonant frequency. Experimental and theoretical results obtainedwith C_(60) and metal-organic materials using ns and ps laser at 532nm are presented.
基金support from the National Natural Science Foundation of China(Nos.51606158,11604311,and 12074151)Sichuan Science and Technology Program(No.2021JDRC0022)+3 种基金Natural Science Foundation of Fujian Province(No.2021J05202)Research Project of Fashu Foundation(No.MFK23006)Open Fund of the Key Laboratory of Metallurgical Equipment and Control Technology of Ministry of Education in Wuhan University of Science and Technology(No.MECOF2022B01)the project supported by Guangxi Key Laboratory of Precision Navigation Technology and Application,Guilin University of Electronic Technology(No.DH202321).
文摘The field of terahertz devices is important in terahertz technology.However,most of the current devices have limited functionality and poor performance.To improve device performance and achieve multifunctionality,we designed a terahertz device based on a combination of VO_(2)and metamaterials.This device can be tuned using the phase-transition characteristics of VO_(2),which is included in the triple-layer structure of the device,along with SiO_(2)and Au.The terahertz device exhibits various advantageous features,including broadband coverage,high absorption capability,dynamic tunability,simple structural design,polarization insensitivity,and incidentangle insensitivity.The simulation results showed that by controlling the temperature,the terahertz device achieved a thermal modulation range of spectral absorption from 0 to 0.99.At 313 K,the device exhibited complete reflection of terahertz waves.As the temperature increased,the absorption rate also increased.When the temperature reached 353 K,the device absorption rate exceeded 97.7%in the range of 5-8.55 THz.This study used the effective medium theory to elucidate the correlation between conductivity and temperature during the phase transition of VO_(2).Simultaneously,the variation in device performance was further elucidated by analyzing and depicting the intensity distribution of the electric field on the device surface at different temperatures.Furthermore,the impact of various structural parameters on device performance was examined,offering valuable insights and suggestions for selecting suitable parameter values in real-world applications.These characteristics render the device highly promising for applications in stealth technology,energy harvesting,modulation,and other related fields,thus showcasing its significant potential.
文摘常规的碳捕集与封存技术和碳捕集、利用与封存技术多针对固定源排放CO_(2),直接空气捕集CO_(2)(Direct Air Capture,DAC)技术作为一种新兴的负碳排放技术可对分布源排放的CO_(2)进行捕集,进一步降低全球大气CO_(2)体积分数。介绍了DAC典型液体吸收工艺、固体吸附工艺的发展过程及相关示范项目建设情况,分析了新兴DAC工艺的技术特点,探讨了现有DAC工艺关键装置方案和未来发展趋势。DAC液体吸收工艺具有吸收剂原料成本较低、选择性较高的特点,可实现大规模连续化捕集,但再生过程中能耗较高。DAC固体吸附工艺具有模块化、投资成本较低的特点,且再生过程能耗相对较低,但需要定期对吸附材料更换和吸附设备维护,适用于较小规模的DAC应用场景。对2种典型DAC工艺吸收/吸附材料进行了概述。DAC电振荡吸附工艺中CO_(2)在固体电极中发生化学反应被捕集,并通过外加电场改变固体电极极性实现CO_(2)脱附,该工艺具有比基于热量或压力的分离过程更高的效率。空气中CO_(2)选择透过DAC分离膜从而实现了高效碳捕集。DAC变湿吸附工艺通过湿度的改变实现CO_(2)的吸脱附,突破了常规变温/变压吸附的高能耗限制等问题。DAC生物吸收工艺通过藻类生物的光合作用将CO_(2)吸收固定。基于双功能催化剂的DAC工艺可以在一个综合过程中实现CO_(2)的捕集与催化,节省了CO_(2)捕集后的运输与存储成本。DAC液体吸收工艺的关键装置为空气接触器、颗粒反应器、煅烧炉和熟化器,其中空气接触器开发的核心在于提高气液接触效率,减少喷淋过程中的水分损失和减轻设备腐蚀,颗粒反应器和熟化器开发的关键在于提高固液两相物料的接触效率以及反应后的固液分离效率。DAC固体吸附工艺由引风模块、吸附/再生模块、供能再生模块和CO_(2)压缩模块组成的模块化装置组成,其中优化吸附模块的核心在于提高气固传质速率、调谐CO_(2)捕集效率、降低压降;并基于不同应用场景工艺需求选择合适的再生系统或利用清洁能源,优化DAC工艺过程和开发高性能的DAC核心装置至关重要。
