Deformable gel particles(DGPs) possess the capability of deep profile control and flooding. However, the deep migration behavior and plugging mechanism along their path remain unclear. Breakage, an inevitable phenomen...Deformable gel particles(DGPs) possess the capability of deep profile control and flooding. However, the deep migration behavior and plugging mechanism along their path remain unclear. Breakage, an inevitable phenomenon during particle migration, significantly impacts the deep plugging effect. Due to the complexity of the process, few studies have been conducted on this subject. In this paper, we conducted DGP flow experiments using a physical model of a multi-point sandpack under various injection rates and particle sizes. Particle size and concentration tests were performed at each measurement point to investigate the transportation behavior of particles in the deep part of the reservoir. The residual resistance coefficient and concentration changes along the porous media were combined to analyze the plugging performance of DGPs. Furthermore, the particle breakage along their path was revealed by analyzing the changes in particle size along the way. A mathematical model of breakage and concentration changes along the path was established. The results showed that the passage after breakage is a significant migration behavior of particles in porous media. The particles were reduced to less than half of their initial size at the front of the porous media. Breakage is an essential reason for the continuous decreases in particle concentration, size, and residual resistance coefficient. However, the particles can remain in porous media after breakage and play a significant role in deep plugging. Higher injection rates or larger particle sizes resulted in faster breakage along the injection direction, higher degrees of breakage, and faster decreases in residual resistance coefficient along the path. These conditions also led to a weaker deep plugging ability. Smaller particles were more evenly retained along the path, but more particles flowed out of the porous media, resulting in a poor deep plugging effect. The particle size is a function of particle size before injection, transport distance, and different injection parameters(injection rate or the diameter ratio of DGP to throat). Likewise, the particle concentration is a function of initial concentration, transport distance, and different injection parameters. These models can be utilized to optimize particle injection parameters, thereby achieving the goal of fine-tuning oil displacement.展开更多
High-performance Cu/Graphene composite wire synergistically strengthened by nano Cr_(3)C_(2) phase was directly synthesized via hot press sintering followed by severe cold plastic deformation, using liquid paraffin an...High-performance Cu/Graphene composite wire synergistically strengthened by nano Cr_(3)C_(2) phase was directly synthesized via hot press sintering followed by severe cold plastic deformation, using liquid paraffin and CuCr alloy powder as the raw materials. Since graphene is in situ formed under the catalysis of copper powder during the sintering process, the problem that graphene is easy to agglomerate and difficult to disperse uniformly in the copper matrix has been solved. The nano Cr_(3)C_(2)-particles nailed at the interface favor to improve the interface bonding. The Cu/Graphene composite possesses high electrical conductivity, hardness, and plasticity. The composite wire exhibits high electrical conductivity of 96.93% IACS, great tensile strength of 488MPa, and excellent resistance to softening. Even after annealing at 400℃ for 1 h, the tensile strength can still reach 268 MPa with a conductivity of about 99.14% IACS.The wire's temperature coefficient of resistance(TCR) is largely reduced to 0.0035/℃ due to the complex structure,which leads the wire to present low resistivity at higher temperatures. Such Cu/Graphene composite wire with excellent comprehensive performance has a good application prospect in high-power density motors.展开更多
During the design of pipeline,the determination of local resistant coefficient is often come arcoss.The sudden enlargement local resistant coefficient ξ 1=1-A 1A 2 2 is determined through theory.In the paper,the ...During the design of pipeline,the determination of local resistant coefficient is often come arcoss.The sudden enlargement local resistant coefficient ξ 1=1-A 1A 2 2 is determined through theory.In the paper,the sudden enlargement local resistant coefficient under the conditions of three kinds of A 1A 2 was studied in experiment.In the end ,the result shows that ξ 1 is related not only to two flow cross sections,but also to the velocity.Through experimental research,the relationship between ξ 1,A 1A 2 and V 1 was determined.In a word,the hydraulic calculation of pipeline can be done by taking correspondent ξ 1 ,according to the design velocity V 1 and A 1A 2.展开更多
As a metal alloy,NiCr films have a relatively high resistivity and low temperature coefficient of resistance (TCR) and are widely used in electronic components and sensors.However,the resistivity of pure NiCr is insuf...As a metal alloy,NiCr films have a relatively high resistivity and low temperature coefficient of resistance (TCR) and are widely used in electronic components and sensors.However,the resistivity of pure NiCr is insufficient for high-resistance and highly stable film resistors.In this study,a quaternary NiCrAlSi target (47:33:10:10,wt.%) was successfully used to prepare resistor films with resistivities ranging from 1000 to 10 000μΩcm and TCR within±100 ppm/K.An oxygen flow was introduced during the sputtering process.The films exhibit hightemperature stability at 450℃.The films were analyzed using Auger electron spectroscopy,x-ray diffraction,time-of-flight secondary-ion mass spectrometry,and x-ray photoelectron spectroscopy.The results show that the difference in the oxide proportion of the films caused the differences in resistivity.The near-zero TCR values were considered to be due to the competition between silicon and other metals.This study provides new insights into the electrical properties of NiCr-based films containing Si,which will drive the manufacturing of resistors with high resistivity and zero TCR.展开更多
By means of a logarithm law for the velocity profile, a corrected formula of bed resistance coefficient, which involves many factors such as gradient of still water depth, variation of surface elevation, flow directio...By means of a logarithm law for the velocity profile, a corrected formula of bed resistance coefficient, which involves many factors such as gradient of still water depth, variation of surface elevation, flow direction, and so on, is derived from the 3D governing equations of tidal current by averaging over the whole water depth. Theoretical analysis and application have shown that the 2D plane tidal current numerical model would be more reasonable and could be applied to steep bottom topography when the corrected bed resistance coefficient is used, therefore the results of reproduction simulation and engineering calculation would be more scientific and reasonable.展开更多
This paper presents a further study of the Manning and Darcy-Weisbach resistance coefficients, as they play a significant role in assessing the cross-sectional mean velocity, conveyance capacity and determining the la...This paper presents a further study of the Manning and Darcy-Weisbach resistance coefficients, as they play a significant role in assessing the cross-sectional mean velocity, conveyance capacity and determining the lateral distribution of depth mean velocity and local boundary shear stress in compound channels. The relationships between the local, zonal and overall resistance coefficients, and a wide range of geometries and different roughness between the main channel and the flood plain are established by analyzing a vast amount of experimental data from a British Science and Engineering Research Council Flood Channel Facility (SERC-FCF). And the experimental results also show that the overall Darcy-Weisbach resistance coefficient for a compound channel is the function of Reynolds number, but the function relationship is different from that for a single channel. By comparing and analyzing the conventional methods with the experimental data to predict composite roughness in compound channels, it is found that these methods are not suitable for compound channels. Moreover, the reason why the conventional methods cannot assess correctly the conveyance capacity of compound channels is also analyzed in this paper.展开更多
The relationship of electrical properties of Mn-doped Ba_(0.92)Ca_(0.08)TiO_3PTCR (positive temperature coefficient resistance) ceramics with two sintering schedules wasdiscussed. Using TEM (transmission electron micr...The relationship of electrical properties of Mn-doped Ba_(0.92)Ca_(0.08)TiO_3PTCR (positive temperature coefficient resistance) ceramics with two sintering schedules wasdiscussed. Using TEM (transmission electron microscope) combined with EDS (energy dispersive X-rayspectrometer), the Mn ions distributed at grain boundaries were analyzed. The results show that thePTCR effect of Mn-doped PTCR ceramics is more dependent on the sintering schedule than those of Mnfree. The phenomenon may be caused by the valence states variance of Mn ions segregated at the grainboundaries.展开更多
In this article,computational fluid dynamics(CFD)are used to explore the dynamics of water transport inside the pitted thickening of a plant xylem vessel.A pitted thickening model combined with the Bernoulli equation ...In this article,computational fluid dynamics(CFD)are used to explore the dynamics of water transport inside the pitted thickening of a plant xylem vessel.A pitted thickening model combined with the Bernoulli equation is used to analyze the influence of various factors(namely,the inner diameter,thickening width,thickening height,thickening spacing,number of laps and adjacent pit axial rotation).The pressure drop and the flow resistance coefficient are the variable parameters for our analysis.The results show that these two parameters are proportional to the thickening height and thickening width,and inversely proportional to the inner diameter,thickening spacing and number of laps.Three different wall thickening structures of the vessel are compared and the pitted thickening vessel is shown to provide the largest structural flow resistance,the annular thickening vessel has the second largest resistance and the helical thickening vessel corresponds to the smallest resistance of the three structures.展开更多
In this paper, the feasibility study of chemical flooding is carried out for ultra-high porosity and high permeability heavy oil field with permeability higher than 10 μm<sup>2</sup> and porosity greater ...In this paper, the feasibility study of chemical flooding is carried out for ultra-high porosity and high permeability heavy oil field with permeability higher than 10 μm<sup>2</sup> and porosity greater than 35%. The viscosity-concentration relationship of four kinds of oil flooding systems such as hydrolyzed polyacrylamide, structural polymer A, structural polymer B and gel was studied. The results showed that the viscosity of ordinary polymer and structural polymer B was lower compared with other two types of oil displacement agents, and the viscosity of structural polymer A was higher. The higher the concentration, the higher the viscosity retention rate. The gel system has the highest viscosity and best anti-shear ability. The resistance coefficient and residual resistance coefficient of structural polymer A and gel system were further studied. The results show that permeability, velocity and polymer concentration all affect the resistance coefficient and residual resistance coefficient. From the point of view of resistance establishment ability, it is considered that structural polymer A is not suitable for permeability formation above 10 μm<sup>2</sup>. Gel system has stronger ability to establish resistance coefficient than structural polymer A flooding system, and it is more feasible for formation system with permeability above 10 μm<sup>2</sup>.展开更多
In order to improve the shift decision strategy for an off-road vehicle with automated manual transmission(AMT),the generalized road resistance coefficient is defined based on the longitudinal dynamics analysis.Vehi...In order to improve the shift decision strategy for an off-road vehicle with automated manual transmission(AMT),the generalized road resistance coefficient is defined based on the longitudinal dynamics analysis.Vehicle mass and generalized road resistance coefficient are estimated using the recursive least square(RLS)method with multiple forgetting factors.The improved shift schedule is designed based on the generalized road resistance coefficient under uphill road condition.The simulation and real vehicle test verify the effectiveness of improved shift strategy and the improvement of vehicle dynamic performance.展开更多
The changes of resistivity of conductive asphalt concrete at different temperatures were studied,and positive temperature coefficient(PTC)modelwas established to estimate the influence of temperature on the resistiv...The changes of resistivity of conductive asphalt concrete at different temperatures were studied,and positive temperature coefficient(PTC)modelwas established to estimate the influence of temperature on the resistivity quantitatively,which eliminated the interference with conductivity evaluation brought by temperature variation.Finally,the analysis of temperature cycling test results proves that the changes of percolation network structure caused by temperature variation prompt the emergence of PTC of conductive asphalt concrete.展开更多
The change of the temperature coefficient of resistivity (a) with the particle size, dp, and the grain size, dc, in the nanostructured Ag bulk samples was investigated. dp and dc were controlled by heating the nano-Ag...The change of the temperature coefficient of resistivity (a) with the particle size, dp, and the grain size, dc, in the nanostructured Ag bulk samples was investigated. dp and dc were controlled by heating the nano-Ag powders over the temperature range from 393 to 453 K. The electrical resistance measurements of the nanostructured Ag bulk samples obtained by compacting the Ag powders after heat treatments showed a change in the sign of a with dP and dc. When dp and dc are smaller or equal to 18 and 11 nm below room temperature or 20 and 12 nm above room temperature, respectively, the sign of the temperature coefficient of resistivity changes from positive to negative. The negative a arises mainly from the high resistivity induced by the particle interfaces with very lowly ordered or even disordered structure, a large volume fraction of interfaces and impurities existing in the interfaces, and the quantum size effect appearing in the nano-Ag grains.展开更多
In this research the bed friction effect is estimated of a river estuary by use of hydrodynamic analysis. The on-site sampled data of the Wu River estuary is applied to the analysis. There are many dynamic factors tha...In this research the bed friction effect is estimated of a river estuary by use of hydrodynamic analysis. The on-site sampled data of the Wu River estuary is applied to the analysis. There are many dynamic factors that affect the flow characteristics in the estuary. The effect of tide on the generation of tidal current, bottom friction and geometry effect is the focus of this paper. The Wu River estuary is about 15 hn in length, with a small bottom slope and no physical obstruction; thus the incident wave at the estuary is considered a progressive wave with damping effect. The amplitude reduction and phase shift of the incident wave are analyzed. By the analysis of celerity reduction factor of the estuary, the estimated value of mean resistance coefficient M(μ ,κ), damping modulus μ, and wave number κ for the sections at observation stations can be determined. Furthermore, data gathered from on-site observations are applied for validation. Finally, Manning' s coefficient for each section of the observation stations can be determined. It is found that the value of Manning' s coefficient is small downstream and increases towards upstream, and that the bed friction effect of an estuary varies largely. The estimated results of the paper are compared with the empirical formulas and the modified solution for practical application is discussed.展开更多
In this paper,a novel parallel mechanism which can be used to evaluate body-to-bogie yawtorque is proposed.It can satisfy experimental testing for rotation resistance coefficient(RRC) with various types of bogies,diff...In this paper,a novel parallel mechanism which can be used to evaluate body-to-bogie yawtorque is proposed.It can satisfy experimental testing for rotation resistance coefficient(RRC) with various types of bogies,different rotational speeds,and different states of air spring.Aiming at the problem that computing speed of Newton iterative method for solving rotational angle is incompetence to meet the real-time requirements,and also that other methods adopting physical device such as laser displacement sensor to solve rotational angle possess larger measurement error,the analytical techniques method used for solving rotational angle is presented.Finally,by using the upper-single-6-DOF motion platform as an authentic urging mean to simulate a real vehicle,the test was carried out under the speeds of 0.2 and 1.0(°)/s,with the air spring at the inflated and deflated states,respectively.The results showthat the RRC of the bogie under various conditions is less than 0.06,which meets the standard requirement EN-14363.It was also found that the speed of vehicles moving along curves and the state of air spring were key factors influencing the RRC.The feasibilities of this model and test method are verified in this study.展开更多
Pan and field experiments were conducted to investigate the effect of surface film on ammonia volatilization from water and paddy soil. The results showed that the addition of the surface film on floodwater reduced th...Pan and field experiments were conducted to investigate the effect of surface film on ammonia volatilization from water and paddy soil. The results showed that the addition of the surface film on floodwater reduced the rate of ammonia volatilization, however, the reduction of the latter varied greatly with its rates of addition. Jayaweera-Mikkelsen ammonia volatilization model with the introduction of a parameter Kf, a relative measure of the resistance of the surface film on ammonia volatilization, was used to elucidate the effectiveness of the surface film on lowering ammonia volatilization. The Kf value was calculated from the results ob-展开更多
The coefficient of strain resistance for metals,solid solutions and ordering alloys in annealing state decreases,while K increases in cold working state.The value K of pure metals and solid solutions invaraibly decrea...The coefficient of strain resistance for metals,solid solutions and ordering alloys in annealing state decreases,while K increases in cold working state.The value K of pure metals and solid solutions invaraibly decreases with temperature increass.The main factors influencing the coefHcient of strain resistance are crystal defect,dispersion and degree of atomic arrangement.展开更多
Y^3+-doped (Bi 1/2 Na 1/2) TiO 3-CaTiO 3-BaTiO 3 (BNCBT) positive temperature coefficient of resistivity (PTCR) ceramics sintered in air atmosphere were investigated in this study. (Bi 1/2 Na 1/2) TiO 3 (BNT...Y^3+-doped (Bi 1/2 Na 1/2) TiO 3-CaTiO 3-BaTiO 3 (BNCBT) positive temperature coefficient of resistivity (PTCR) ceramics sintered in air atmosphere were investigated in this study. (Bi 1/2 Na 1/2) TiO 3 (BNT) component can remarkably increase the onset temperature T c of PTCR ceramics with the expense of the resistivity R 25 increase. CaTiO 3 (9–27 mol%) component can decrease the resistivity, and adjust the effects of BNT phase on the T c point. For the sample containing 3 mol% CaTiO 3 , T c raises from 122 ℃ to 153 ℃ when only 0.6 mol% BNT added, while for the ones with higher CaTiO 3 content (9–27 mol%), T c is only increased by a rate of 8–9℃/1.0 mol% BNT. The effects of BNT and CaTiO 3 components on R25/Rmin (negative temperature coefficient effect) are also discussed.展开更多
Heteroepitaxial undoped ZnO films were grown on Si (100) substrates by radio-frequency reactive sputtering, and then some of the samples were annealed at N2-800℃ (Sample 1, S1) and 02-800℃ (Sample 2, S2) for 1...Heteroepitaxial undoped ZnO films were grown on Si (100) substrates by radio-frequency reactive sputtering, and then some of the samples were annealed at N2-800℃ (Sample 1, S1) and 02-800℃ (Sample 2, S2) for 1 h, respectively. The electrical transport characteristics of a ZnO/p-Si heterojunction were investigated. We found two interesting phenomena. First, the temperature coefficients of grain boundary resistances of S 1 were positive (positive temperature coefficients, PTC) while that of both the as-grown sample and S2 were negative (negative temperature coefficients, NTC). Second, the I-V properties of S2 were similar to those common p-n junctions while that of both the as-grown sample and S 1 had double Schottky barrier behaviors, which were in contradiction with the ideal p-n heterojunction model. Combined with the deep level transient spectra results, this revealed that the concentrations of intrinsic defects in ZnO grains and the densities of interfacial states in ZnO/p-Si heterojunction varied with the different annealing ambiences, which caused the grain boundary barriers in ZnO/p-Si heterojunction to vary. This resulted in adjustment electrical properties ofZnO/p-Si heterojunction that may be suitable in various applications.展开更多
Based on a series of experiments under both ice-covered and free surface conditions, the present article discusses the role of flow velocity and critical shear Reynolds number for incipient motion of bed material. The...Based on a series of experiments under both ice-covered and free surface conditions, the present article discusses the role of flow velocity and critical shear Reynolds number for incipient motion of bed material. The influence of the resistance coefficients of both the underside of the ice cover and the channel bed on the location of the maximum velocity has been discussed. In addition, the impacts of ice and composite resistance coefficients on flow velocity for incipient motion of bed material have been assessed. The diagram describing the critical shear Reynolds number and the dimensionless shear stress for the incipient motion of sediment under ice covered conditions with different under cover resistance coefficient has been established. The effects of grain size on densimetric Froude number for incipient motion of bed material have been investigated. A relationship between the densimetric Froude number for incipient motion of bed material and the median grain size of bed material as well as the roughness coefficient of channel bed and roughness coefficient of ice cover has been established.展开更多
Aquatic vegetation zone is now receiving an increasing attention as an effective way to protect the shorelines and riverbeds. To simulate the flow through the vegetation zone, the vegetation elements are often simplif...Aquatic vegetation zone is now receiving an increasing attention as an effective way to protect the shorelines and riverbeds. To simulate the flow through the vegetation zone, the vegetation elements are often simplified as equidistant rigid cylinders, and in the whole zone, the porous media approach can be applied. In this study, a non-constant inertial resistance coefficient is introduced to model the unevenly distribution of the drag forces on the cylinders, and an improved porous media approach is applied to one circular array of cylinders positioned in a 2-D flume. The calculated velocity profile is consistent with the experimental data.展开更多
基金supported by the Major National Science and Technology Project(No.2016ZX05054011)。
文摘Deformable gel particles(DGPs) possess the capability of deep profile control and flooding. However, the deep migration behavior and plugging mechanism along their path remain unclear. Breakage, an inevitable phenomenon during particle migration, significantly impacts the deep plugging effect. Due to the complexity of the process, few studies have been conducted on this subject. In this paper, we conducted DGP flow experiments using a physical model of a multi-point sandpack under various injection rates and particle sizes. Particle size and concentration tests were performed at each measurement point to investigate the transportation behavior of particles in the deep part of the reservoir. The residual resistance coefficient and concentration changes along the porous media were combined to analyze the plugging performance of DGPs. Furthermore, the particle breakage along their path was revealed by analyzing the changes in particle size along the way. A mathematical model of breakage and concentration changes along the path was established. The results showed that the passage after breakage is a significant migration behavior of particles in porous media. The particles were reduced to less than half of their initial size at the front of the porous media. Breakage is an essential reason for the continuous decreases in particle concentration, size, and residual resistance coefficient. However, the particles can remain in porous media after breakage and play a significant role in deep plugging. Higher injection rates or larger particle sizes resulted in faster breakage along the injection direction, higher degrees of breakage, and faster decreases in residual resistance coefficient along the path. These conditions also led to a weaker deep plugging ability. Smaller particles were more evenly retained along the path, but more particles flowed out of the porous media, resulting in a poor deep plugging effect. The particle size is a function of particle size before injection, transport distance, and different injection parameters(injection rate or the diameter ratio of DGP to throat). Likewise, the particle concentration is a function of initial concentration, transport distance, and different injection parameters. These models can be utilized to optimize particle injection parameters, thereby achieving the goal of fine-tuning oil displacement.
基金supported by the National Key Research and Development Program of China under Grant2021YFB2500600the Youth Innovation Promotion Association CAS under Grant2022138+2 种基金the National Natural Science Foundation of China under Grant51901221the Institute of Electrical EngineeringCAS under GrantE155710201 and E155710301。
文摘High-performance Cu/Graphene composite wire synergistically strengthened by nano Cr_(3)C_(2) phase was directly synthesized via hot press sintering followed by severe cold plastic deformation, using liquid paraffin and CuCr alloy powder as the raw materials. Since graphene is in situ formed under the catalysis of copper powder during the sintering process, the problem that graphene is easy to agglomerate and difficult to disperse uniformly in the copper matrix has been solved. The nano Cr_(3)C_(2)-particles nailed at the interface favor to improve the interface bonding. The Cu/Graphene composite possesses high electrical conductivity, hardness, and plasticity. The composite wire exhibits high electrical conductivity of 96.93% IACS, great tensile strength of 488MPa, and excellent resistance to softening. Even after annealing at 400℃ for 1 h, the tensile strength can still reach 268 MPa with a conductivity of about 99.14% IACS.The wire's temperature coefficient of resistance(TCR) is largely reduced to 0.0035/℃ due to the complex structure,which leads the wire to present low resistivity at higher temperatures. Such Cu/Graphene composite wire with excellent comprehensive performance has a good application prospect in high-power density motors.
文摘During the design of pipeline,the determination of local resistant coefficient is often come arcoss.The sudden enlargement local resistant coefficient ξ 1=1-A 1A 2 2 is determined through theory.In the paper,the sudden enlargement local resistant coefficient under the conditions of three kinds of A 1A 2 was studied in experiment.In the end ,the result shows that ξ 1 is related not only to two flow cross sections,but also to the velocity.Through experimental research,the relationship between ξ 1,A 1A 2 and V 1 was determined.In a word,the hydraulic calculation of pipeline can be done by taking correspondent ξ 1 ,according to the design velocity V 1 and A 1A 2.
基金support from the Innovation Foundation of the Shanghai Institute of Technical Physics,Chinese Academy of Sciences。
文摘As a metal alloy,NiCr films have a relatively high resistivity and low temperature coefficient of resistance (TCR) and are widely used in electronic components and sensors.However,the resistivity of pure NiCr is insufficient for high-resistance and highly stable film resistors.In this study,a quaternary NiCrAlSi target (47:33:10:10,wt.%) was successfully used to prepare resistor films with resistivities ranging from 1000 to 10 000μΩcm and TCR within±100 ppm/K.An oxygen flow was introduced during the sputtering process.The films exhibit hightemperature stability at 450℃.The films were analyzed using Auger electron spectroscopy,x-ray diffraction,time-of-flight secondary-ion mass spectrometry,and x-ray photoelectron spectroscopy.The results show that the difference in the oxide proportion of the films caused the differences in resistivity.The near-zero TCR values were considered to be due to the competition between silicon and other metals.This study provides new insights into the electrical properties of NiCr-based films containing Si,which will drive the manufacturing of resistors with high resistivity and zero TCR.
基金National Natural Science Foundation of China(Grant No.49971064)
文摘By means of a logarithm law for the velocity profile, a corrected formula of bed resistance coefficient, which involves many factors such as gradient of still water depth, variation of surface elevation, flow direction, and so on, is derived from the 3D governing equations of tidal current by averaging over the whole water depth. Theoretical analysis and application have shown that the 2D plane tidal current numerical model would be more reasonable and could be applied to steep bottom topography when the corrected bed resistance coefficient is used, therefore the results of reproduction simulation and engineering calculation would be more scientific and reasonable.
基金The project supported by the National Natural Science Foundation of China(50279024)the National Key Basic Research and Development Program of China(973 Program)(2003CB415202)the Specialized Research Fund for the Doctoral Program of Higher Education(2
文摘This paper presents a further study of the Manning and Darcy-Weisbach resistance coefficients, as they play a significant role in assessing the cross-sectional mean velocity, conveyance capacity and determining the lateral distribution of depth mean velocity and local boundary shear stress in compound channels. The relationships between the local, zonal and overall resistance coefficients, and a wide range of geometries and different roughness between the main channel and the flood plain are established by analyzing a vast amount of experimental data from a British Science and Engineering Research Council Flood Channel Facility (SERC-FCF). And the experimental results also show that the overall Darcy-Weisbach resistance coefficient for a compound channel is the function of Reynolds number, but the function relationship is different from that for a single channel. By comparing and analyzing the conventional methods with the experimental data to predict composite roughness in compound channels, it is found that these methods are not suitable for compound channels. Moreover, the reason why the conventional methods cannot assess correctly the conveyance capacity of compound channels is also analyzed in this paper.
基金This work is financially supported by the Postdoctoral Research Foundation of the Chinese Education Ministry (No. 023202238)
文摘The relationship of electrical properties of Mn-doped Ba_(0.92)Ca_(0.08)TiO_3PTCR (positive temperature coefficient resistance) ceramics with two sintering schedules wasdiscussed. Using TEM (transmission electron microscope) combined with EDS (energy dispersive X-rayspectrometer), the Mn ions distributed at grain boundaries were analyzed. The results show that thePTCR effect of Mn-doped PTCR ceramics is more dependent on the sintering schedule than those of Mnfree. The phenomenon may be caused by the valence states variance of Mn ions segregated at the grainboundaries.
基金supported by the National Natural Science Foundation of China(Grant Nos.51279071,51969009)the Foundation of the Ministry of Education of China for Ph.D candidates in University(Grant No.2013531413002).
文摘In this article,computational fluid dynamics(CFD)are used to explore the dynamics of water transport inside the pitted thickening of a plant xylem vessel.A pitted thickening model combined with the Bernoulli equation is used to analyze the influence of various factors(namely,the inner diameter,thickening width,thickening height,thickening spacing,number of laps and adjacent pit axial rotation).The pressure drop and the flow resistance coefficient are the variable parameters for our analysis.The results show that these two parameters are proportional to the thickening height and thickening width,and inversely proportional to the inner diameter,thickening spacing and number of laps.Three different wall thickening structures of the vessel are compared and the pitted thickening vessel is shown to provide the largest structural flow resistance,the annular thickening vessel has the second largest resistance and the helical thickening vessel corresponds to the smallest resistance of the three structures.
文摘In this paper, the feasibility study of chemical flooding is carried out for ultra-high porosity and high permeability heavy oil field with permeability higher than 10 μm<sup>2</sup> and porosity greater than 35%. The viscosity-concentration relationship of four kinds of oil flooding systems such as hydrolyzed polyacrylamide, structural polymer A, structural polymer B and gel was studied. The results showed that the viscosity of ordinary polymer and structural polymer B was lower compared with other two types of oil displacement agents, and the viscosity of structural polymer A was higher. The higher the concentration, the higher the viscosity retention rate. The gel system has the highest viscosity and best anti-shear ability. The resistance coefficient and residual resistance coefficient of structural polymer A and gel system were further studied. The results show that permeability, velocity and polymer concentration all affect the resistance coefficient and residual resistance coefficient. From the point of view of resistance establishment ability, it is considered that structural polymer A is not suitable for permeability formation above 10 μm<sup>2</sup>. Gel system has stronger ability to establish resistance coefficient than structural polymer A flooding system, and it is more feasible for formation system with permeability above 10 μm<sup>2</sup>.
基金Supported by the National High Technology Engineering Program(303002011421)
文摘In order to improve the shift decision strategy for an off-road vehicle with automated manual transmission(AMT),the generalized road resistance coefficient is defined based on the longitudinal dynamics analysis.Vehicle mass and generalized road resistance coefficient are estimated using the recursive least square(RLS)method with multiple forgetting factors.The improved shift schedule is designed based on the generalized road resistance coefficient under uphill road condition.The simulation and real vehicle test verify the effectiveness of improved shift strategy and the improvement of vehicle dynamic performance.
基金Funded by the National Natural Science Foundation of China(No.51178348)
文摘The changes of resistivity of conductive asphalt concrete at different temperatures were studied,and positive temperature coefficient(PTC)modelwas established to estimate the influence of temperature on the resistivity quantitatively,which eliminated the interference with conductivity evaluation brought by temperature variation.Finally,the analysis of temperature cycling test results proves that the changes of percolation network structure caused by temperature variation prompt the emergence of PTC of conductive asphalt concrete.
基金the National Natural Science FOundation of China under grant! No.19974041the National Major Fundamental ResearCh Program-Nal
文摘The change of the temperature coefficient of resistivity (a) with the particle size, dp, and the grain size, dc, in the nanostructured Ag bulk samples was investigated. dp and dc were controlled by heating the nano-Ag powders over the temperature range from 393 to 453 K. The electrical resistance measurements of the nanostructured Ag bulk samples obtained by compacting the Ag powders after heat treatments showed a change in the sign of a with dP and dc. When dp and dc are smaller or equal to 18 and 11 nm below room temperature or 20 and 12 nm above room temperature, respectively, the sign of the temperature coefficient of resistivity changes from positive to negative. The negative a arises mainly from the high resistivity induced by the particle interfaces with very lowly ordered or even disordered structure, a large volume fraction of interfaces and impurities existing in the interfaces, and the quantum size effect appearing in the nano-Ag grains.
文摘In this research the bed friction effect is estimated of a river estuary by use of hydrodynamic analysis. The on-site sampled data of the Wu River estuary is applied to the analysis. There are many dynamic factors that affect the flow characteristics in the estuary. The effect of tide on the generation of tidal current, bottom friction and geometry effect is the focus of this paper. The Wu River estuary is about 15 hn in length, with a small bottom slope and no physical obstruction; thus the incident wave at the estuary is considered a progressive wave with damping effect. The amplitude reduction and phase shift of the incident wave are analyzed. By the analysis of celerity reduction factor of the estuary, the estimated value of mean resistance coefficient M(μ ,κ), damping modulus μ, and wave number κ for the sections at observation stations can be determined. Furthermore, data gathered from on-site observations are applied for validation. Finally, Manning' s coefficient for each section of the observation stations can be determined. It is found that the value of Manning' s coefficient is small downstream and increases towards upstream, and that the bed friction effect of an estuary varies largely. The estimated results of the paper are compared with the empirical formulas and the modified solution for practical application is discussed.
基金National Natural Science Foundation of China(No.51575232)Jilin University Youth Science and Technology Innovation Fund,China(No.450060507032)
文摘In this paper,a novel parallel mechanism which can be used to evaluate body-to-bogie yawtorque is proposed.It can satisfy experimental testing for rotation resistance coefficient(RRC) with various types of bogies,different rotational speeds,and different states of air spring.Aiming at the problem that computing speed of Newton iterative method for solving rotational angle is incompetence to meet the real-time requirements,and also that other methods adopting physical device such as laser displacement sensor to solve rotational angle possess larger measurement error,the analytical techniques method used for solving rotational angle is presented.Finally,by using the upper-single-6-DOF motion platform as an authentic urging mean to simulate a real vehicle,the test was carried out under the speeds of 0.2 and 1.0(°)/s,with the air spring at the inflated and deflated states,respectively.The results showthat the RRC of the bogie under various conditions is less than 0.06,which meets the standard requirement EN-14363.It was also found that the speed of vehicles moving along curves and the state of air spring were key factors influencing the RRC.The feasibilities of this model and test method are verified in this study.
文摘Pan and field experiments were conducted to investigate the effect of surface film on ammonia volatilization from water and paddy soil. The results showed that the addition of the surface film on floodwater reduced the rate of ammonia volatilization, however, the reduction of the latter varied greatly with its rates of addition. Jayaweera-Mikkelsen ammonia volatilization model with the introduction of a parameter Kf, a relative measure of the resistance of the surface film on ammonia volatilization, was used to elucidate the effectiveness of the surface film on lowering ammonia volatilization. The Kf value was calculated from the results ob-
文摘The coefficient of strain resistance for metals,solid solutions and ordering alloys in annealing state decreases,while K increases in cold working state.The value K of pure metals and solid solutions invaraibly decreases with temperature increass.The main factors influencing the coefHcient of strain resistance are crystal defect,dispersion and degree of atomic arrangement.
基金Project supported by the SPAT of Shanghai Committee of Chinese People's Political Consultative Conference and Shanghai Education Development Foundation (Grant No.2008012)
文摘Y^3+-doped (Bi 1/2 Na 1/2) TiO 3-CaTiO 3-BaTiO 3 (BNCBT) positive temperature coefficient of resistivity (PTCR) ceramics sintered in air atmosphere were investigated in this study. (Bi 1/2 Na 1/2) TiO 3 (BNT) component can remarkably increase the onset temperature T c of PTCR ceramics with the expense of the resistivity R 25 increase. CaTiO 3 (9–27 mol%) component can decrease the resistivity, and adjust the effects of BNT phase on the T c point. For the sample containing 3 mol% CaTiO 3 , T c raises from 122 ℃ to 153 ℃ when only 0.6 mol% BNT added, while for the ones with higher CaTiO 3 content (9–27 mol%), T c is only increased by a rate of 8–9℃/1.0 mol% BNT. The effects of BNT and CaTiO 3 components on R25/Rmin (negative temperature coefficient effect) are also discussed.
基金Project supported by the National Natural Science Foundation of China(Nos.50472009,10474091,50532070)
文摘Heteroepitaxial undoped ZnO films were grown on Si (100) substrates by radio-frequency reactive sputtering, and then some of the samples were annealed at N2-800℃ (Sample 1, S1) and 02-800℃ (Sample 2, S2) for 1 h, respectively. The electrical transport characteristics of a ZnO/p-Si heterojunction were investigated. We found two interesting phenomena. First, the temperature coefficients of grain boundary resistances of S 1 were positive (positive temperature coefficients, PTC) while that of both the as-grown sample and S2 were negative (negative temperature coefficients, NTC). Second, the I-V properties of S2 were similar to those common p-n junctions while that of both the as-grown sample and S 1 had double Schottky barrier behaviors, which were in contradiction with the ideal p-n heterojunction model. Combined with the deep level transient spectra results, this revealed that the concentrations of intrinsic defects in ZnO grains and the densities of interfacial states in ZnO/p-Si heterojunction varied with the different annealing ambiences, which caused the grain boundary barriers in ZnO/p-Si heterojunction to vary. This resulted in adjustment electrical properties ofZnO/p-Si heterojunction that may be suitable in various applications.
基金the National Natural Science Foundation of China (Grant No.10372028).
文摘Based on a series of experiments under both ice-covered and free surface conditions, the present article discusses the role of flow velocity and critical shear Reynolds number for incipient motion of bed material. The influence of the resistance coefficients of both the underside of the ice cover and the channel bed on the location of the maximum velocity has been discussed. In addition, the impacts of ice and composite resistance coefficients on flow velocity for incipient motion of bed material have been assessed. The diagram describing the critical shear Reynolds number and the dimensionless shear stress for the incipient motion of sediment under ice covered conditions with different under cover resistance coefficient has been established. The effects of grain size on densimetric Froude number for incipient motion of bed material have been investigated. A relationship between the densimetric Froude number for incipient motion of bed material and the median grain size of bed material as well as the roughness coefficient of channel bed and roughness coefficient of ice cover has been established.
基金Project supported by the Special Fund of Marine-Fishery Science-Technology Extension in Guangdong Province(Grant No.A201401B08)
文摘Aquatic vegetation zone is now receiving an increasing attention as an effective way to protect the shorelines and riverbeds. To simulate the flow through the vegetation zone, the vegetation elements are often simplified as equidistant rigid cylinders, and in the whole zone, the porous media approach can be applied. In this study, a non-constant inertial resistance coefficient is introduced to model the unevenly distribution of the drag forces on the cylinders, and an improved porous media approach is applied to one circular array of cylinders positioned in a 2-D flume. The calculated velocity profile is consistent with the experimental data.