A 0.7–7 GHz wideband RF receiver front-end So C is designed using the CMOS process. The front-end is composed of two main blocks: a single-ended wideband low noise amplifier（LNA） and an in-phase/quadrature（I/Q） v...A 0.7–7 GHz wideband RF receiver front-end So C is designed using the CMOS process. The front-end is composed of two main blocks: a single-ended wideband low noise amplifier（LNA） and an in-phase/quadrature（I/Q） voltage-driven passive mixer with IF amplifiers. Based on a self-biased resistive negative feedback topology,the LNA adopts shunt-peaking inductors and a gate inductor to boost the bandwidth. The passive down-conversion mixer includes two parts: passive switches and IF amplifiers. The measurement results show that the frontend works well at different LO frequencies, and this chip is reconfigurable among 0.7 to 7 GHz by tuning the LO frequency. The measured results under 2.5-GHz LO frequency show that the front-end SoC achieves a maximum conversion gain of 26 dB, a minimum noise figure（NF） of 3.2 dB, with an IF bandwidth of greater than 500 MHz.The chip area is 1.67 × 1.08 mm;.展开更多
文摘A 0.7–7 GHz wideband RF receiver front-end So C is designed using the CMOS process. The front-end is composed of two main blocks: a single-ended wideband low noise amplifier（LNA） and an in-phase/quadrature（I/Q） voltage-driven passive mixer with IF amplifiers. Based on a self-biased resistive negative feedback topology,the LNA adopts shunt-peaking inductors and a gate inductor to boost the bandwidth. The passive down-conversion mixer includes two parts: passive switches and IF amplifiers. The measurement results show that the frontend works well at different LO frequencies, and this chip is reconfigurable among 0.7 to 7 GHz by tuning the LO frequency. The measured results under 2.5-GHz LO frequency show that the front-end SoC achieves a maximum conversion gain of 26 dB, a minimum noise figure（NF） of 3.2 dB, with an IF bandwidth of greater than 500 MHz.The chip area is 1.67 × 1.08 mm;.
