Deformation failure mechanism and application of the backfill along the goaf-side retained roadway

In order to determine the rational width of backfill in the goaf-side retained roadway, the deformation failure mechanism of surrounding rock in retained roadway is studied in the use of theoretical analysis, numerical simulation, etc., when the width of backfill is different. The results show that: with the increase of backfill width, the roof deformation above the backfill decreases; the outside of backfill obviously suffers from greater stress compared to the inner side of backfill; the damage firstly appears in the intersection of top backfill and roof; the plastic failure area is mainly distributed in the roof and floor of inside the roadway; 2 m wide backfill in the goaf-side retained roadway can meet the requirements of roadway deformation. Based on the original combination support of "anchor-mesh-belt-lock" in the haulage-track roadway, the study also considers the reinforced support of "anchor-mesh-belt" above the backfill, and 50 m ahead of working face, and 200 m behind the working face. This kind of support achieves a good result. The roadway deformation of field measurement shows that it can satisfy the need of the next working face.

Stability analysis and control technology of gob‑side entry retaining with double roadways by flling with high‑water material in gently inclined coal seam

To ameliorate the defects of insufcient support resistance of traditional roadside flling bodies for gob-side entry retaining(GER),overcome the inability to adapt to the deformation of surrounding rock,and isolate the goaf efectively,a new type of high-water material as a roadside flling body for GER technology with double roadways was proposed.The instability analysis and control technology of GER with double roadways by flling high-water material into a gently inclined coal seam were studied.The basic mechanical properties of the new high-water material were investigated through laboratory experiments,and their main advantages were identifed.The reasonable width of the roadside flling wall of a high-water material was obtained by combining ground pressure observation and theoretical calculations.The distribution characteristics of the stress and plastic zone of surrounding rock of GER after being stabilized by the disturbance of the working face were studied using numerical simulations,and the failure range of GER by flling with high-water material was revealed.Based on this,a coupling control technology of anchor cables and bolts+single props+metal mesh+anchor bolts is proposed.Through the coupling methods of arranging borehole peeping and observing the convergences of surrounding rock,the results demonstrate that GER with double roadways by flling with a 1.8-m-wide high-water material has a good control efect.The above research will play an active role in promoting the application of high-water materials in GER roadside flling.