Polystyrene-styrene/butadiene diblock copolymers were synthesized via reversible addition-fragmentation chain transfer （RAFT） miniemulsion polymerization.During the polymerization process,the molecular weight distri...Polystyrene-styrene/butadiene diblock copolymers were synthesized via reversible addition-fragmentation chain transfer （RAFT） miniemulsion polymerization.During the polymerization process,the molecular weight distribution was narrow and the numerical molecular weight of the copolymers increased with increasing conversion of monomers,which was close to the theoretical.FT-IR and ^1H NMR results indicated that the microstructure of the polymer was mainly 1,4-trans-butadiene with small amount of 1,2-units,and composition in the copolymers was obtained.展开更多
Reversible addition-fragmentation chain transfer(RAFT) mediated grafting of acrylonitrile onto Polyethylene/Poly(ethylene terephthalate)(PE/PET) composite fibers was performed using γ-irradiation as the initial sourc...Reversible addition-fragmentation chain transfer(RAFT) mediated grafting of acrylonitrile onto Polyethylene/Poly(ethylene terephthalate)(PE/PET) composite fibers was performed using γ-irradiation as the initial source at ambient temperature. Different initial concentrations of 2-cyanoprop-2-yl dithiobenzonate were used as the chain transfer agent. The kinetics of graft polymerization is in accordance with the living RAFT polymerization. The successful grafting of acrylonitrile is proved by Fourier transform infrared spectroscopy analysis.The results of monofilament tensile test show that mechanical properties of the fibers change slightly after grafting. Scanning electronic microscopy images of the fibers show that the surface of RAFT grafted fibers is smoother than that of fibers grafted conventionally.展开更多
Effective molecularly imprinted membranes（MIMs） were developed as an efficient adsorbent for the selective removal ofp-hydroxybenzoic acid（p-HB） from acetylsalicylic acid（ASA, aspirin）. The MIMs were grafted suc...Effective molecularly imprinted membranes（MIMs） were developed as an efficient adsorbent for the selective removal ofp-hydroxybenzoic acid（p-HB） from acetylsalicylic acid（ASA, aspirin）. The MIMs were grafted successfully from poly（vinylidene fluoride） microfiltration membranes via reversible addition-fragmentation chain transfer（RAFT） polymerization. The graft copolymerization of acrylic acid（AA） in the presence of template p-hydroxybenzoic acid led to molecularly imprinted polymer（MIP） film coated membranes. The obtained MIMs were characterized by scanning electron microscopy（SEM）, Fourier transform infrared spectrophotometer（FTIR） and Raman spectra, and batch mode adsorption studies were carried ont to investigate the specific adsorption equilibrium, kinetics and selective recognition properties of different MIMs. The kinetic properties of the MIMs could be well described by the pseudo-second-order rate equation. Selective permeation experiments were performed to evaluate the permeation selectivity of the p-HB imprinted membranes. The observed performances of the MIMs are applicable to the further purification of aspirin. Keywords Acetylsalicylic acid; Reversible addition-fragmentation chain transfer; Molecularly imprinted membrane; p-Hydroxybenzoic acid; Selective adsorption展开更多
Bulk polymerization of styrene was carried out in the presence of a reversible addition fragmentation chain transfer (RAFT) of benzyl dithiobenzoate (BDB). The comparison between reaction systems with and without BDB ...Bulk polymerization of styrene was carried out in the presence of a reversible addition fragmentation chain transfer (RAFT) of benzyl dithiobenzoate (BDB). The comparison between reaction systems with and without BDB indicates that there is significant retardation in the reaction rate when BDB is used. The molecular weight of styrene polymer prepared with BDB shows linear relationship with the conversion of monomer, polydispersity is as narrow as 1.2, and no gel effects are observed during the polymerization with BDB, which are characteristics of a living radical polymerization. It has been found that the concentrations of BDB and azobis (isobutyronitrile) (AIBN) have opposite effects on the polymerization kinetics, and the AIBN dominates.展开更多
Aggregation-induced emission(AIE)is a unique phenomenon whereby aggregation of molecules induces fluorescence emission as opposed to the more commonly known aggregation-caused quenching(ACQ).AIE has the potential to b...Aggregation-induced emission(AIE)is a unique phenomenon whereby aggregation of molecules induces fluorescence emission as opposed to the more commonly known aggregation-caused quenching(ACQ).AIE has the potential to be utilized in the large-scale production of AIE-active polymeric materials because of their wide range of practical applications such as stimuli-responsive sensors,biological imaging agents,and drug delivery systems.This is evident from the increasing number of publications over the years since AIE was first discovered.In addition,the evergrowing interest in this field has led many researchers around the world to develop new and creative methods in the design of monomers,initiators and crosslinkers,with the goal of broadening the scope and utility of AIE polymers.One of the most promising approaches to the design and synthesis of AIE polymers is the use of the reversible-deactivation radical polymerization(RDRP)techniques,which enabled the production of well-controlled AIE materials that are often difficult to achieve by other methods.In this review,a summary of some recent works that utilize RDRP for AIE polymer design and synthesis is presented,including(i)the design of AIE-related monomers,initiators/crosslinkers;the achievements in preparation of AIE polymers using(ii)reversible addition–fragmentation chain transfer(RAFT)technique;(iii)atom transfer radical polymerization(ATRP)technique;(iv)other techniques such as Cu(0)-RDRP technique and nitroxide-mediated polymerization(NMP)technique;(v)the possible applications of these AIE polymers,and finally(vi)a summary/perspective and the future direction of AIE polymers.展开更多
Reverse addition\|fragmentation chain transfer (RAFT) polymerizatin of MAn with St is reported aiming at the synthesis of a well\|defined alternating copolymer of MAn with St.The results show that the polymers possess...Reverse addition\|fragmentation chain transfer (RAFT) polymerizatin of MAn with St is reported aiming at the synthesis of a well\|defined alternating copolymer of MAn with St.The results show that the polymers possess predetermined molecular weight and molecular weight distribution as narrow as 1 2. A novel well\|defined block copolymer P(MAn\| alt \|St)\| b \|PSt has also been prepared by the copolymerization of MAn with excess amount of St in molar feed via RAFT process.展开更多
基金supported by Major Program of National Natural Science Foundation of China(No. 20836007)National Natural Science Foundation of China(No.20806067).
文摘Polystyrene-styrene/butadiene diblock copolymers were synthesized via reversible addition-fragmentation chain transfer （RAFT） miniemulsion polymerization.During the polymerization process,the molecular weight distribution was narrow and the numerical molecular weight of the copolymers increased with increasing conversion of monomers,which was close to the theoretical.FT-IR and ^1H NMR results indicated that the microstructure of the polymer was mainly 1,4-trans-butadiene with small amount of 1,2-units,and composition in the copolymers was obtained.
基金Supported by the National Natural Science Foundation of China(Nos.11475246 and 11175234)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA02030205)
文摘Reversible addition-fragmentation chain transfer(RAFT) mediated grafting of acrylonitrile onto Polyethylene/Poly(ethylene terephthalate)(PE/PET) composite fibers was performed using γ-irradiation as the initial source at ambient temperature. Different initial concentrations of 2-cyanoprop-2-yl dithiobenzonate were used as the chain transfer agent. The kinetics of graft polymerization is in accordance with the living RAFT polymerization. The successful grafting of acrylonitrile is proved by Fourier transform infrared spectroscopy analysis.The results of monofilament tensile test show that mechanical properties of the fibers change slightly after grafting. Scanning electronic microscopy images of the fibers show that the surface of RAFT grafted fibers is smoother than that of fibers grafted conventionally.
基金Supported by the National Natural Science Foundation of China（No.21606099）, the Natural Science Foundation of Jilin Province, China（No.20180623042TC） and the Science and Technology Research Foundation of the Department of Education of Jilin Province, China（Nos. JJKH20180 782KJ, JJKH20180761K J, JJKH20170376K J）.
文摘Effective molecularly imprinted membranes（MIMs） were developed as an efficient adsorbent for the selective removal ofp-hydroxybenzoic acid（p-HB） from acetylsalicylic acid（ASA, aspirin）. The MIMs were grafted successfully from poly（vinylidene fluoride） microfiltration membranes via reversible addition-fragmentation chain transfer（RAFT） polymerization. The graft copolymerization of acrylic acid（AA） in the presence of template p-hydroxybenzoic acid led to molecularly imprinted polymer（MIP） film coated membranes. The obtained MIMs were characterized by scanning electron microscopy（SEM）, Fourier transform infrared spectrophotometer（FTIR） and Raman spectra, and batch mode adsorption studies were carried ont to investigate the specific adsorption equilibrium, kinetics and selective recognition properties of different MIMs. The kinetic properties of the MIMs could be well described by the pseudo-second-order rate equation. Selective permeation experiments were performed to evaluate the permeation selectivity of the p-HB imprinted membranes. The observed performances of the MIMs are applicable to the further purification of aspirin. Keywords Acetylsalicylic acid; Reversible addition-fragmentation chain transfer; Molecularly imprinted membrane; p-Hydroxybenzoic acid; Selective adsorption
文摘Bulk polymerization of styrene was carried out in the presence of a reversible addition fragmentation chain transfer (RAFT) of benzyl dithiobenzoate (BDB). The comparison between reaction systems with and without BDB indicates that there is significant retardation in the reaction rate when BDB is used. The molecular weight of styrene polymer prepared with BDB shows linear relationship with the conversion of monomer, polydispersity is as narrow as 1.2, and no gel effects are observed during the polymerization with BDB, which are characteristics of a living radical polymerization. It has been found that the concentrations of BDB and azobis (isobutyronitrile) (AIBN) have opposite effects on the polymerization kinetics, and the AIBN dominates.
基金Australian Research Council,Grant/Award Number:CE200100009。
文摘Aggregation-induced emission(AIE)is a unique phenomenon whereby aggregation of molecules induces fluorescence emission as opposed to the more commonly known aggregation-caused quenching(ACQ).AIE has the potential to be utilized in the large-scale production of AIE-active polymeric materials because of their wide range of practical applications such as stimuli-responsive sensors,biological imaging agents,and drug delivery systems.This is evident from the increasing number of publications over the years since AIE was first discovered.In addition,the evergrowing interest in this field has led many researchers around the world to develop new and creative methods in the design of monomers,initiators and crosslinkers,with the goal of broadening the scope and utility of AIE polymers.One of the most promising approaches to the design and synthesis of AIE polymers is the use of the reversible-deactivation radical polymerization(RDRP)techniques,which enabled the production of well-controlled AIE materials that are often difficult to achieve by other methods.In this review,a summary of some recent works that utilize RDRP for AIE polymer design and synthesis is presented,including(i)the design of AIE-related monomers,initiators/crosslinkers;the achievements in preparation of AIE polymers using(ii)reversible addition–fragmentation chain transfer(RAFT)technique;(iii)atom transfer radical polymerization(ATRP)technique;(iv)other techniques such as Cu(0)-RDRP technique and nitroxide-mediated polymerization(NMP)technique;(v)the possible applications of these AIE polymers,and finally(vi)a summary/perspective and the future direction of AIE polymers.
文摘Reverse addition\|fragmentation chain transfer (RAFT) polymerizatin of MAn with St is reported aiming at the synthesis of a well\|defined alternating copolymer of MAn with St.The results show that the polymers possess predetermined molecular weight and molecular weight distribution as narrow as 1 2. A novel well\|defined block copolymer P(MAn\| alt \|St)\| b \|PSt has also been prepared by the copolymerization of MAn with excess amount of St in molar feed via RAFT process.
