In order to lucubrate the rolling characteristic of the two stands reversible cold rolling mill and establish the tension and thickness control strategy, the steady-state characteristic simulating program was establis...In order to lucubrate the rolling characteristic of the two stands reversible cold rolling mill and establish the tension and thickness control strategy, the steady-state characteristic simulating program was established using the steady-state continuous rolling theory. The influences of each factor on exit thickness under different tension control methods were analyzed. The results show that, the influence of the entry stand gap on exit thickness is significant and it changes little with different tension control methods. As a result, the entry stand gap can be used as the main control method of exit thickness, whereas rolling speed of any stand and roll gap of the exit stand can be used to adjust the inter-stand tension. The results are beneficial for thickness and tension control of the two stands reversible cold rolling mill.展开更多
In this study an incompressible flow with non-Newtonian fluids in the reverse roll coating process was investigated.Non-Newtonian behavior of the coating fluid was accounted by using power law model with power index,n...In this study an incompressible flow with non-Newtonian fluids in the reverse roll coating process was investigated.Non-Newtonian behavior of the coating fluid was accounted by using power law model with power index,n,ranging from 0.8 to 1.2.Effect of roll speed ratio(V2/V1)of the panel roll to the applicator roll and gap distance on the coating film thickness were also investigated.Numerical results were in good agreement with those of experimental data within 15%-20%.Results indicated that the film thickness ratios are function of power-law index,roll speed ration and ratio of roll radius to gap distance.The equations for film thickness ratio were obtained from numerical results as shown below:■,where t1,t2 and t3 are inlet film,transferred film and leakage film thickness,respectively,n is power-law index,V1 and V2 are roll speed of applicator roll and panel roll,Rm is average radius of two rolls and H0 is gap distance.The correlations are accurate within 10%for 0.8≤n≤1.2,0.5≤V_(2)/V_(1)≤2,and 7.7×10^(−5)≤H_(0)/R_(m)≤1.54×10^(−4).展开更多
基金Item Sponsored by National Basic Research Program of China (2011CB612204)Doctoral Scientific Research Fund of Taiyuan University of Science and Technology of China (20112007)
文摘In order to lucubrate the rolling characteristic of the two stands reversible cold rolling mill and establish the tension and thickness control strategy, the steady-state characteristic simulating program was established using the steady-state continuous rolling theory. The influences of each factor on exit thickness under different tension control methods were analyzed. The results show that, the influence of the entry stand gap on exit thickness is significant and it changes little with different tension control methods. As a result, the entry stand gap can be used as the main control method of exit thickness, whereas rolling speed of any stand and roll gap of the exit stand can be used to adjust the inter-stand tension. The results are beneficial for thickness and tension control of the two stands reversible cold rolling mill.
文摘In this study an incompressible flow with non-Newtonian fluids in the reverse roll coating process was investigated.Non-Newtonian behavior of the coating fluid was accounted by using power law model with power index,n,ranging from 0.8 to 1.2.Effect of roll speed ratio(V2/V1)of the panel roll to the applicator roll and gap distance on the coating film thickness were also investigated.Numerical results were in good agreement with those of experimental data within 15%-20%.Results indicated that the film thickness ratios are function of power-law index,roll speed ration and ratio of roll radius to gap distance.The equations for film thickness ratio were obtained from numerical results as shown below:■,where t1,t2 and t3 are inlet film,transferred film and leakage film thickness,respectively,n is power-law index,V1 and V2 are roll speed of applicator roll and panel roll,Rm is average radius of two rolls and H0 is gap distance.The correlations are accurate within 10%for 0.8≤n≤1.2,0.5≤V_(2)/V_(1)≤2,and 7.7×10^(−5)≤H_(0)/R_(m)≤1.54×10^(−4).