High-quality rice flour is the foundation for the production of various rice-based products.Milling is an essential step in obtaining rice flour,during which significant changes occur in the physicochemical and qualit...High-quality rice flour is the foundation for the production of various rice-based products.Milling is an essential step in obtaining rice flour,during which significant changes occur in the physicochemical and quality characteristics of the flour.Although rice flour obtained through mainstream wet milling methods exhibits superior quality,low production efficiency and wastewater discharge limit the development of the industry.Dry milling,on the other hand,conserves water resources,but adversely affects flour performance due to excessive heat generation.As an emerging powder-making technique,semi-dry milling offers a promising solution by enhancing flour quality and reducing environmental impact.This is achieved by minimizing soaking time through hot air treatment while reducing mechanical energy consumption to reach saturated water absorption levels.However,continuous production remains a challenge.This comprehensive review summarizes the effects of various milling technologies on rice flour properties and product qualities.It also discusses key control indicators and technical considerations for rice flour processing equipment and processes.展开更多
Rice storage proteins(RSPs)are plant proteins with high nutritional quality.As the second largest type of storage substance in rice,it is the main source of protein intake for people who consume rice as a staple food....Rice storage proteins(RSPs)are plant proteins with high nutritional quality.As the second largest type of storage substance in rice,it is the main source of protein intake for people who consume rice as a staple food.The content and type of RSPs affect the appearance,processing quality and eating quality of rice.These effects involve the distribution of RSPs in rice grains as well as the interactions of RSPs with other components such as starch in rice grains.In the past two decades,some progress has been made in the genetic improvement of RSPs.However,the determination mechanism of protein content and composition in rice is still unclear,and the mechanism of the effect of RSPs on rice quality has not been elucidated.In this review,the composition,biosynthesis and distribution of RSPs,and quantitative trait loci mapping and cloning of RSP genes are summarized,the research progress of the influence of RSPs and their components on rice quality are reviewed,and the research directions in the future are proposed.展开更多
Although studies on the balance between yield and quality of japonica soft super rice are limited, they are crucial for super rice cultivation. In order to investigate the effects of nitrogen application rate on grain...Although studies on the balance between yield and quality of japonica soft super rice are limited, they are crucial for super rice cultivation. In order to investigate the effects of nitrogen application rate on grain yield and rice quality, two japonica soft super rice varieties, Nanjing 9108 (NJ 9108) and Nanjing 5055 (NJ 5055), were used under seven N levels with the application rates of 0, 150, 187.5,225, 262.5, 300, and 337.5 kg ha^-1. With the increasing nitrogen application level, grain yield of both varieties first increased and then decreased. The highest yield was obtained at 300 kg ha^-1. The milling quality and protein content increased, while the appearance quality, amylose content, gel consistency, cooking/eating quality, and rice flour viscosity decreased. Milling was significantly negatively related with the eating/cooking quality whereas the appearance was significantly positively related with cooking/eating quality. These results suggest that nitrogen level significantly affects the yield and rice quality of japonica soft super rice. We conclude that the suitable nitrogen application rate for japonica soft super rice, NJ 9108 and NJ 5055, is 270 kg ha^-1, under which they obtain high yield as well as superior eating/cooking quality.展开更多
There is limited information about the combined effect of shading time and nitrogen (N) on grain filling and quality of rice. Therefore, two japonica super rice cultivars, Nanjing 44 and Ningjing 3, were used to stu...There is limited information about the combined effect of shading time and nitrogen (N) on grain filling and quality of rice. Therefore, two japonica super rice cultivars, Nanjing 44 and Ningjing 3, were used to study the effect of shading time and N level on the characteristics of rice panicle and grain filling as well as the corresponding yield and quality. At a low N level (150 kg N ha^-1, 150N), grain yield decreased (by 21.07-26.07%) under the treatment of 20 days of shading before heading (BH) compared with the no shading (NS) treatment. These decreases occurred because of shortened panicle length, decreased number of primary and secondary branches, as well as the grain number and weight per panicle. At 150N, in the treatment of 20 days of shading after heading (AH), grain yield also decreased (by 9.46-10.60%) due to the lower grain weight per panicle. The interaction of shading and N level had a significant effect on the number of primary and secondary branches. A high level of N (300 kg N ha^-1, 300N) could offset the negative effect of shading on the number of secondary branches and grain weight per panicle, and consequently increased the grain yield in both shading treatments. In superior grains, compared with 150N NS, the time to reach 99% of the grain weight (T99) was shortened by 1.6 to 1.7 days, and the grain weight was decreased by 4.18-5.91% in 150N BH. In 150N AH, the grain weight was 13.39-13.92% lower than that in 150N NS due to the slow mean and the maximum grain-filling rate (GRmean and GRmax). In inferior grains, grain weight and GRmean had a tendency of 150N NS〉150N BH〉150N AH. Under shaded conditions, 300N decreased the grain weight due to lower GReen both in superior and inferior grains. Compared with 150N NS, the milling and appearance qualities as well as eating and cooking quality were all decreased in 150N BH and 150N AH. Shading with the high level of 300N improved the milling quality and decreased the number of chalky rice kernels, but the eating and cooking quality was reduced with increased chalky area and overall chalkiness. Therefore, in the case of short term shading, appropriate N fertilizer could be used to improve the yield and milling quality of rice, but limited application of N fertilizer is recommended to achieve good eating and cooking quality of rice.展开更多
A pot experiment was conducted to study the effects of different nitrogen application time (during the tillering or the booting stages) with the same nitrogen rates on the caryopsis development and grain quality of ...A pot experiment was conducted to study the effects of different nitrogen application time (during the tillering or the booting stages) with the same nitrogen rates on the caryopsis development and grain quality of rice variety Yangdao 6. The increased nitrogen fertilizer (urea), especially applied during the booting stage, could evidently increase the milled rice rate, head rice rate and protein content in rice grains compared with the control (no nitrogen application), and decrease chalky grain rate and amylose content. Moreover, the increased nitrogen fertilizer significantly affected the caryopsis development and enhanced the grain weight when nitrogen applied during the tillering and the booting stages, especially during the booting stage. During caryopsis development the increased nitrogen fertilizer applied during the tillering and booting stages could obviously decrease the total starch and amylose contents, but not obviously for the amylopectin content in rice grain. Increased topdressing of nitrogen fertilizer, especially applied during the booting stage, had significant effect on the development and structures of amyloplasts and proteinoplasts. That is, it could change the distribution, number and shape of amyloplasts and proteinoplasts in the endosperm cells especially in grain abdomen, Compared with the control the arrangements of amyloplasts and proteinoplasts were closer, with more numbers, higher density and less interspaces each ohter. Furthermore, most amyloplasts showed polyhedron under the increased nitrogen fertilizer level.展开更多
Mechanical transplanting with carpet seedlings(MC) and mechanical direct seeding(MD) are newly developed planting methods, which increase in popularity and planted area each year. Knowing the difference for yield and ...Mechanical transplanting with carpet seedlings(MC) and mechanical direct seeding(MD) are newly developed planting methods, which increase in popularity and planted area each year. Knowing the difference for yield and rice quality under different planting methods is of great importance for the development of high quality and yield cultivation techniques under mechanical conditions. Therefore, three kinds of japonica rice including hybrid japonica rice, inbreed japonica rice, and soft rice were adopted as materials. And the differences in the quality of processing, appearance, cooking and eating quality, nutrition, and the rapid viscosity analyzer(RVA) profile were studied to reveal the effects of planting methods on yield and quality of different types of japonica rice. Results showed that the milled rice and head rice rates under MC was significantly higher than those under MD, and the processing quality of inbreed japonica rice was the most stable. Compared with MC, length/width ratio of rice under MD was significantly increased, and chalkiness rate, size, and degree were significantly decreased. The protein content under MD was lower than that under MC. MC showed higher peak viscosity and breakdown value than MD. The taste value was the greatest for soft rice, followed by inbreed japonica rice, and then by japonica hybrid rice, with no significant differences resulting from planting methods. Compared with MC, MD significantly improved the appearance quality, though processing quality and nutritional quality were decreased. And there was no significant difference in cooking and eating quality between MC and MD. Under different planting methods, the appearance quality of inbreed japonica rice changed the most and the processing quality was the most stable. The nutritional, cooking and eating quality of soft rice changed the least. Therefore, according to the different planting methods and market needs, selecting the appropriate rice varieties can reduce the risks in rice production and achieve good rice quality.展开更多
High grain protein content(GPC) reduces rice eating and cooking quality(ECQ). We generated OsAAP6 and OsAAP10 knockout mutants in three high-yielding japonica varieties and one japonica line using the CRISPR/Cas9 syst...High grain protein content(GPC) reduces rice eating and cooking quality(ECQ). We generated OsAAP6 and OsAAP10 knockout mutants in three high-yielding japonica varieties and one japonica line using the CRISPR/Cas9 system. Mutation efficiency varied with genetic background in the T_0 generation, and GPC in the T_1 generation decreased significantly,owing mainly to a reduction in glutelin content. Amylose content was down-regulated significantly in some Osaap6 and all Osaap10 mutants. The increased taste value of these mutants was supported by Rapid Visco Analysis(RVA) profiles, which showed higher peak viscosity and breakdown viscosity and lower setback viscosity than the wild type. There were no significant deficiencies in agronomic traits of the mutants. Targeted mutagenesis of OsAAP6 and OsAAP10, especially OsAAP10, using the CRISPR/Cas9 system can rapidly reduce GPC and improve ECQ of rice, providing a new strategy for the breeding cultivars with desired ECQ.展开更多
Nitrogen is one of the important factors for high yield of rice.Apart from high yield,high quality has become the current urgent demand for rice production.Grain-filling stage is crucial for rice yield and quality for...Nitrogen is one of the important factors for high yield of rice.Apart from high yield,high quality has become the current urgent demand for rice production.Grain-filling stage is crucial for rice yield and quality formation.However,the effect of nitrogen on grain-filling characteristics and the relationship of grain-filling characteristics and rice quality of mid-season indica rice were still unclear.A field experiment was carried out to ascertain the critical grain-filling characteristics that contribute to rice milling quality,appearance quality and cooking and eating quality under nitrogen applications.The results showed that nitrogen applications prolonged the duration of superior and inferior grain filling.The mean grainfilling rate(G_(mean))and the maximum grain-filling rate(G_(max))of the inferior grains were positively correlated with chalky kernel rate,chalkiness,and amylose content.The time reaching the maximum grain-filling rate(T_(max)G)of the inferior grains was positively correlated with brown rice rate,milled rice rate,and head milled rice rate.Chalky kernel rate and chalkiness were negatively correlated with peak paste viscosity and breakdown viscosity.Less amylose content and more crude protein content were detected in nitrogen application of Liangyoupei 9 and Y Liangyou 2 both in 2016 and 2017.According to the correlation analysis,better cooking and eating quality of Y Liangyou 2 which had less amylose content might result from its higher G_(max)and G_(mean)of inferior grain than that of Liangyoupei 9 in the treatments of nitrogen application.These results indicated that the prolonging grain-filling duration and increasing grain weight at the maximum grain-filling rate of inferior grains contributed to the improvement of milling quality,appearance quality,and cooking and eating quality of mid-season indica rice under appropriate nitrogen applications.展开更多
The BIL (backcross inbred line) population derived from the cross between Koshihikari (good eating and cooking quality, japonica) and Kasalath (poor quality, indica) was used to analyze the QTLs for amylose cont...The BIL (backcross inbred line) population derived from the cross between Koshihikari (good eating and cooking quality, japonica) and Kasalath (poor quality, indica) was used to analyze the QTLs for amylose content (AC), gelatinization temperature (GT), gel consistency (GC) and protein content (PC). Eight main-effect QTLs including 2 for AC, 3 for GT, 2 for GC and 1 for PC were identified, Moreover, 27 epistatic QTL pairs including 7 for AC, 5 for GT, 4 for GC and 11 for PC were also detected while for AC and GT, one main-effect QTL with a major gene was detected, respectively. Therefore, the main-effect QTL might be more responsible for the current variation than the epistetic QTL. The result indicated that the main-effect QTL is the primary genetic basis for those traits. However, for PC, the epistatic QTL explained a much greater portion of the total variation than main-effect QTL, suggesting that epistatic loci are the primary genetic basis for such trait. In the experiment, chromosome segment substitution lines (CSSLs) were used to confirm reliabilities of the main effect QTLs detected in BIL population. Of the 8 main-effect QTLs for 4 traits in BIL analysis, 6 were confirmed end 2 remained unconfirmed by CSSLs analysis.展开更多
To ascertain the effect mechanism of high temperature after anthesis on rice quality, the experiment was conducted with two rice lines, the heat-tolerant line 996 and heat-sensitive line 4628, with high temperature an...To ascertain the effect mechanism of high temperature after anthesis on rice quality, the experiment was conducted with two rice lines, the heat-tolerant line 996 and heat-sensitive line 4628, with high temperature and optimal temperature in the growth chamber to investigate the effect of high temperature stress after anthesis on rice appearance quality, milling quality, cooking and eating quality and starch granule structure of endo- sperm. The result showed that milled rice rate, head rice rate, amylose content and gel consistency of both lines decreased under high temperature stress after anthesis, while the ratio of grain length to width, chalky rate, chalkiness, protein content increased. Under high temperature treatments, gelatinization temperature, final viscosity, set back and peak time increased, breakdown decreased, Mg content and K content increased, Mg/K ra- tio decreased. Under same treatment, the extent of rice quality of heat tolerant line 996 affected by high temperature was lower than that of heat sensitive line 4628. Under high temperature stress after anthesis, starch granule arranged untightly, most of starch granules existed in the form of a single starch endosperm, refractive index decreased, transparency reduced, and led to the formation of chalk. Under high temperature stress af- ter anthesis, the increase of protein content, the decrease of Mg/K, the changes of rice RVA profile characteristics and starch granule structure of endosperm could be the main reason for the decrease of rice cooking and eating quality and appearance quality.展开更多
An early-maturity indica rice variety Zhefu 49, whose grain quality and starch structure are sensitive to environmental temperature, was subjected to different temperatures (32℃ for high temperature and 22℃ for opt...An early-maturity indica rice variety Zhefu 49, whose grain quality and starch structure are sensitive to environmental temperature, was subjected to different temperatures (32℃ for high temperature and 22℃ for optimum temperature) at the grain filling stage in plant growth chambers, and the different expressions of three isoform genes (SBEI, SBEIII and SBE/V) encoding starch branching enzyme (SBE) in the endosperms were studied by the real-time fluorescence quantitative PCR (FQ-PCR) method. Effects of high temperature on the SBE expression in developing rice endosperrns were isoform-dependent. High temperature significantly down-regulated the expressions of SBEI and SBEIII, while up-regulated the expression of SBEIV. Compared with SBEIV and SBEIII, the expression of SBEI gene in Zhefu 49 rice endosperms was more sensitive to temperature variation at the grain filling stage. This study indicates that changes in weather/climate conditions especially temperature stress influence rice grain formation and its quality as evidenced by isoform expression.展开更多
Various post-harvest processes of rice are commonly employed,especially during the off-season,to ensure its consumption feasibility,which often affect the grain quality.Different forms of drying,storage and processing...Various post-harvest processes of rice are commonly employed,especially during the off-season,to ensure its consumption feasibility,which often affect the grain quality.Different forms of drying,storage and processing of rice are evaluated to identify their effects on grain quality.Microwave drying has emerged as an alternative to the widely-used intermittent-drying and fixed-bed-dryer methods of drying paddy rice.Control of drying-air temperatures(between 40℃ and 60℃)according to the rice variety can improve quality,especially for exotic varieties.Keeping stored grain in hygroscopic balance,with water content between 11%to 15%,at temperatures between 16℃ and 20℃ and with intergranular relative humidity near 60%,allows 12 months of storage in a controlled environment without significant deterioration.Other innovations,notably the application of artificial refrigeration to grain stored in bulk in vertical cylindrical silos and the use of impermeable packaging for storage,ensure the conservation of grain mass.The different stages and equipments used to obtain polished,brown and parboiled rice result in significant changes in the nutritional value of rice because of the removal of the outermost layers of the grains.Polishing reduces the nutritional value and physical homogeneity of rice.Brown rice retains more bioactive compounds and nutrients because it does not lose the outer layer of the grains in the polishing processes.Parboiled rice,although less nutritious than brown rice,has better grain integrity and milling yield and less loss of nutrients than white rice.展开更多
Research on the effect of the nitrogen application rate on the balance of the nitrogen utilization, yield and quality of rice is common in South China but is relatively lacking in Northeast China, especially in the Li...Research on the effect of the nitrogen application rate on the balance of the nitrogen utilization, yield and quality of rice is common in South China but is relatively lacking in Northeast China, especially in the Liaohe Delta. In this study, Yanfeng 47 rice was planted in Panjin city, China, to explore the effect of six nitrogen rates (0, 160, 210, 260, 315 and 420 kg N/ha) on the nitrogen use efficiency, rice quality and grain yield of rice plants. The results showed that the application of an appropriate nitrogen rate (210-260 kg N/ha) remarkably increased the nitrogen use efficiency of rice plants, grain yield, rice milling quality and nutritional quality and resulted in a moderate rice eating quality. Although low nitrogen rates (160 kg N/ha) maintained a high rice eating quality, they decreased grain yield and other rice qualities, and excessive nitrogen (315 kg N/ha) increased rice appearance quality but significantly reduced the nitrogen use efficiency (p < 0.05), yield and eating quality of rice. Therefore, to produce rice in the Liaohe Delta <span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">by</span></span></span><span><span><span> an environmentally friendly method and guarantee rice with high quality and yield, the recommended nitrogen application rate is 210 kg N/ha.</span></span></span>展开更多
The interplanting with zero-tillage of rice, i.e. direct sowing rice 10-20 days before wheat harvesting, and remaining about 30-cm high stubble after cutting wheat or rice with no tillage, is a new cultivation technol...The interplanting with zero-tillage of rice, i.e. direct sowing rice 10-20 days before wheat harvesting, and remaining about 30-cm high stubble after cutting wheat or rice with no tillage, is a new cultivation technology in wheat-rice rotation system. To study the effects of interplanting with zero tillage and straw manure on rice growth and quality, an experiment was conducted in a wheat-rotation rotation system. Four treatments, i.e. ZIS (Zero-tillage, straw manure and rice interplanting), Zt (Zero-tillage, no straw manure and rice interplanting), PTS (Plowing tillage, straw manure and rice transplanting), and PT (Plowing tillage, no straw manure and rice transplanting), were used. ZtS reduced plant height, leaf area per plant and the biomass of rice plants, but the biomass accumulation of rice at the late stage was quicker than that under conventional transplanting cultivation. In the first year (2002), there was no significant difference in rice yield among the four treatments. However, rice yield decreased in interplanting with zero-tillage in the second year (2003). Compared with the transplanting treatments, the number of filled grains per panicle decreased but l000-grain weight increased in interplanting with zero-tillage, which were the main factors resulting in higher yield, tnterplanting with zero-tillage improved the milling and appearance qualities of rice. The rates of milled and head rice increased while chalky rice rate and chalkiness decreased in interplanting with zero-tillage. Zero-tillage and interplanting also affected rice nutritional and cooking qualities. In 2002, ZIS showed raised protein content, decreased amylose content, softer gel consistency, resulting in improved rice quality. In 2003, zero-tillage and interplanting decreased protein content and showed similar amylose content as compared with transplanting treatments. Moreover, protein content in PTS was obviously increased in comparison with the other three treatments. The rice in interplanting with zero-tillage treatments had higher peak viscosity and breakdown, lower setback, showing better rice taste quality. The straw manure had no significant effect on rice viscosity under interplanting with zero-tillage, but had the negative influence on the rice taste quality under transplanting with plowing tillage.展开更多
A total of 105 transgenic dce lines independently transformed with a pea ferritin gene (Fer) were previously obtained. After seven generations of selfing and β-glucuronidase (GUS) assisted selection, 82 transgeni...A total of 105 transgenic dce lines independently transformed with a pea ferritin gene (Fer) were previously obtained. After seven generations of selfing and β-glucuronidase (GUS) assisted selection, 82 transgenic lines with stable agronomic traits were got. Among the 82 transgenic lines, two high-iron transgenic rice lines Fer34 and Fer65, with the iron contents in the milled rice being 4.82 and 3.46 times of that of the wild type Xiushui 11, respectively were identified. In the two transgenic lines, the exogenous Fer gene was highly expressed, and inherited as a single locus. The transgene had no negative effect on the agronomic traits of rice plant, other mineral nutritional components, appearance quality and eating quality of the milled rice, indicating that these two lines were elite high-iron breeding lines. Furthermore, the practical application and further studies facilitating utilization of the two elite breeding lines were discussed.展开更多
Effects of rolled leaf gene Rl(t) on grain quality characters of hybrid rice were analyzed by using three pairs of rolled leaf near-isogenic lines under two fertilizer treatments. Under normal fertilizer level (e.g...Effects of rolled leaf gene Rl(t) on grain quality characters of hybrid rice were analyzed by using three pairs of rolled leaf near-isogenic lines under two fertilizer treatments. Under normal fertilizer level (e.g. 450 kg urea per ha), head rice rates and milled rice recovery of rolled leaf hybrids were significantly higher than those of corresponding non-rolled crosses, while the chalky rice rate and chalkiness were all lower. Of the RVA profiles, the peak viscosity, the hot paste viscosity and the breakdown viscosity of the rolled were all higher than those of the corresponding non-rolled ones to various degrees. Increasing fertilizer application for promoting panicle development increased the brown, milled and head rice rates except for Shanyou 63, furthermore, significant difference of head rice rates existed between the rolled leaf Shanyou 559 and Shanyou 559; while the peak viscosity, the hot paste viscosity and the breakdown viscosity all decreased to different levels; changes of values of other characters had no apparent regularity. It suggested that Rl(t) could improve rice quality under certain conditions.展开更多
Taking the main parents (10 male sterile lines and 10 restorer lines) and their 100 combinations of japonica hybrid rice in northern China as materials, the relationships of parental indica-japonica indexes determin...Taking the main parents (10 male sterile lines and 10 restorer lines) and their 100 combinations of japonica hybrid rice in northern China as materials, the relationships of parental indica-japonica indexes determined by the methods of the Cheng’s index as well as simple sequence repeat (SSR) markers with yield and grain quality traits of hybrid rice were studied. For the parents, the Cheng’s index (Chi) ranged from 13.5 to 19.3 and the indica index in SSR markers (ADi) were from 0.12 to 0.38. The classification of parents by Chi was not completely consistent with that by ADi. The Chi of male parent was more closely related to hybrid traits than that of female parent, as contrasted to ADi. At the same time, the difference between parents (PD) in Chi was more closely related to hybrid traits than that in ADi. The indica-japonica indexes of parents and their difference between parents appeared quadratic relationship to hybrid traits with the critical extremum. The directions of the correlation of indica-japonica indexes of parents and their differences with hybrid yield traits were on the opposition to those with hybrid grain quality traits. Therefore, the female parent should match the male parent moderately in indica-japonica index to obtain the optimum of hybrid traits, high yield as well as good quality.展开更多
Plant type and grain quality are two major aspects in rice breeding. Using canonical correlation analysis and canonical redundancy analysis, the relationship between plant type traits and rice grain quality traits was...Plant type and grain quality are two major aspects in rice breeding. Using canonical correlation analysis and canonical redundancy analysis, the relationship between plant type traits and rice grain quality traits was studied with 100 crosses derived from 10 sterile lines × 10 restorer lines. There was a complex relationship between parts of the traits of the two aspects. The angle of the 2nd leaf from the top and single panicle weight played important roles in plant type system and amylose content and grain length in grain quality system. The angle of the 2nd leaf from the top, plant height and single panicle weight had a great effect on grain quality traits, and amylose content, brown rice rate and translucency were easily influenced by plant type traits. Selection index model indicated that japonica hybrid rice in Northern China with good quality was characterized by broad flag leaf and 2nd leaf from the top, narrow and short 3rd leaf from the top, low plant height, short culm, long and more panicles and low single panicle weight.展开更多
The increase of atmospheric carbon dioxide(CO_2) concentration adversely affect several quality traits of rice grains, but the biochemical mechanism remains unclear. The objectives of this study were to determine ho...The increase of atmospheric carbon dioxide(CO_2) concentration adversely affect several quality traits of rice grains, but the biochemical mechanism remains unclear. The objectives of this study were to determine how changes in the source-sink relationship affected rice quality. Source-sink manipulation was achieved by free-air CO_2 enrichment from tillering to maturity and partial removal of spikelet at anthesis using a japonica rice cultivar Wuyunjing 23. Enrichment with CO_2 decreased the head rice percentage and protein concentration of milled rice, but increased the grain chalkiness. In contrast, spikelet removal resulted in a dramatic increase in the head rice percentage and protein concentration, and much less grain chalkiness. Neither CO_2 enrichment nor spikelet removal affected the starch content, but the distribution of starch granule size showed distinct treatment effects. O n average, spikelet removal decreased the percentage of starch granules of diameter 〉10 and 5–10 μm by 23.6 and 5.6%, respectively, and increased those with a diameter of 2–5 and 〈2 μm by 4.6 and 3.3%, respectively. In contrast, CO_2 elevation showed an opposite response: increasing the proportion of large starch granules(〉5 μm) and decreasing that of 〈5 μm. The starch pasting properties were affected by spikelet removal much more than by CO_2 elevation. These results indicated that the protein concentration and starch granule size played a role in chalkiness formation under these experimental conditions.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.31972005)Xinjiang Uygur Autonomous Region‘Tianshan Talent’Training Plan Project,China(Grant No.2022TSYCCX0063).
文摘High-quality rice flour is the foundation for the production of various rice-based products.Milling is an essential step in obtaining rice flour,during which significant changes occur in the physicochemical and quality characteristics of the flour.Although rice flour obtained through mainstream wet milling methods exhibits superior quality,low production efficiency and wastewater discharge limit the development of the industry.Dry milling,on the other hand,conserves water resources,but adversely affects flour performance due to excessive heat generation.As an emerging powder-making technique,semi-dry milling offers a promising solution by enhancing flour quality and reducing environmental impact.This is achieved by minimizing soaking time through hot air treatment while reducing mechanical energy consumption to reach saturated water absorption levels.However,continuous production remains a challenge.This comprehensive review summarizes the effects of various milling technologies on rice flour properties and product qualities.It also discusses key control indicators and technical considerations for rice flour processing equipment and processes.
基金supported by the Scientific Research Foundation of Hunan Provincial Education Department,China(Grant Nos.19A532,19B594 and 19B597)National Key Research and Development Program of China(Grant No.2022YFD2101303)+1 种基金Hunan Key Research and Development Plan Project,China(Grant No.2022NK2032)the Program for Science&Technology Innovation Platform of Hunan Province in China(Grant Nos.2019TP1028 and 2019TP1029).
文摘Rice storage proteins(RSPs)are plant proteins with high nutritional quality.As the second largest type of storage substance in rice,it is the main source of protein intake for people who consume rice as a staple food.The content and type of RSPs affect the appearance,processing quality and eating quality of rice.These effects involve the distribution of RSPs in rice grains as well as the interactions of RSPs with other components such as starch in rice grains.In the past two decades,some progress has been made in the genetic improvement of RSPs.However,the determination mechanism of protein content and composition in rice is still unclear,and the mechanism of the effect of RSPs on rice quality has not been elucidated.In this review,the composition,biosynthesis and distribution of RSPs,and quantitative trait loci mapping and cloning of RSP genes are summarized,the research progress of the influence of RSPs and their components on rice quality are reviewed,and the research directions in the future are proposed.
基金the National Key Research Program of China(2016YFD0300503)the National Natural Science Foundation of China(31601246)+2 种基金the Major Independent Innovation Project in Jangsu Province,China(CX(15)1002)the Special Fund for Agro-scientific Research in the Public Interest,China(201303102)the Natural Science Foundation of the Jiangsu Higher Education Institutions,China(16KJB210014)
文摘Although studies on the balance between yield and quality of japonica soft super rice are limited, they are crucial for super rice cultivation. In order to investigate the effects of nitrogen application rate on grain yield and rice quality, two japonica soft super rice varieties, Nanjing 9108 (NJ 9108) and Nanjing 5055 (NJ 5055), were used under seven N levels with the application rates of 0, 150, 187.5,225, 262.5, 300, and 337.5 kg ha^-1. With the increasing nitrogen application level, grain yield of both varieties first increased and then decreased. The highest yield was obtained at 300 kg ha^-1. The milling quality and protein content increased, while the appearance quality, amylose content, gel consistency, cooking/eating quality, and rice flour viscosity decreased. Milling was significantly negatively related with the eating/cooking quality whereas the appearance was significantly positively related with cooking/eating quality. These results suggest that nitrogen level significantly affects the yield and rice quality of japonica soft super rice. We conclude that the suitable nitrogen application rate for japonica soft super rice, NJ 9108 and NJ 5055, is 270 kg ha^-1, under which they obtain high yield as well as superior eating/cooking quality.
基金grants from the National Key Technology R&D Program of China (2016YFD0300503)the Key Research Program of Jiangsu Province, China (BE2016344)+3 种基金the earmarked fund for China Agriculture Research System (CARS-01-27)the National Nature Science Foundation of China (31701350)the Program for Scientific Elitists of Yangzhou University, Chinafunded by the Priority Academic Program Development of Jiangsu Higher Education Institutions,China
文摘There is limited information about the combined effect of shading time and nitrogen (N) on grain filling and quality of rice. Therefore, two japonica super rice cultivars, Nanjing 44 and Ningjing 3, were used to study the effect of shading time and N level on the characteristics of rice panicle and grain filling as well as the corresponding yield and quality. At a low N level (150 kg N ha^-1, 150N), grain yield decreased (by 21.07-26.07%) under the treatment of 20 days of shading before heading (BH) compared with the no shading (NS) treatment. These decreases occurred because of shortened panicle length, decreased number of primary and secondary branches, as well as the grain number and weight per panicle. At 150N, in the treatment of 20 days of shading after heading (AH), grain yield also decreased (by 9.46-10.60%) due to the lower grain weight per panicle. The interaction of shading and N level had a significant effect on the number of primary and secondary branches. A high level of N (300 kg N ha^-1, 300N) could offset the negative effect of shading on the number of secondary branches and grain weight per panicle, and consequently increased the grain yield in both shading treatments. In superior grains, compared with 150N NS, the time to reach 99% of the grain weight (T99) was shortened by 1.6 to 1.7 days, and the grain weight was decreased by 4.18-5.91% in 150N BH. In 150N AH, the grain weight was 13.39-13.92% lower than that in 150N NS due to the slow mean and the maximum grain-filling rate (GRmean and GRmax). In inferior grains, grain weight and GRmean had a tendency of 150N NS〉150N BH〉150N AH. Under shaded conditions, 300N decreased the grain weight due to lower GReen both in superior and inferior grains. Compared with 150N NS, the milling and appearance qualities as well as eating and cooking quality were all decreased in 150N BH and 150N AH. Shading with the high level of 300N improved the milling quality and decreased the number of chalky rice kernels, but the eating and cooking quality was reduced with increased chalky area and overall chalkiness. Therefore, in the case of short term shading, appropriate N fertilizer could be used to improve the yield and milling quality of rice, but limited application of N fertilizer is recommended to achieve good eating and cooking quality of rice.
基金This work was supported by the National Natural Science Foundation of China(Grant No.30070454).
文摘A pot experiment was conducted to study the effects of different nitrogen application time (during the tillering or the booting stages) with the same nitrogen rates on the caryopsis development and grain quality of rice variety Yangdao 6. The increased nitrogen fertilizer (urea), especially applied during the booting stage, could evidently increase the milled rice rate, head rice rate and protein content in rice grains compared with the control (no nitrogen application), and decrease chalky grain rate and amylose content. Moreover, the increased nitrogen fertilizer significantly affected the caryopsis development and enhanced the grain weight when nitrogen applied during the tillering and the booting stages, especially during the booting stage. During caryopsis development the increased nitrogen fertilizer applied during the tillering and booting stages could obviously decrease the total starch and amylose contents, but not obviously for the amylopectin content in rice grain. Increased topdressing of nitrogen fertilizer, especially applied during the booting stage, had significant effect on the development and structures of amyloplasts and proteinoplasts. That is, it could change the distribution, number and shape of amyloplasts and proteinoplasts in the endosperm cells especially in grain abdomen, Compared with the control the arrangements of amyloplasts and proteinoplasts were closer, with more numbers, higher density and less interspaces each ohter. Furthermore, most amyloplasts showed polyhedron under the increased nitrogen fertilizer level.
基金grants from the National Key R&D Program of China(2016YFD0300503)the earmarked fund for China Agriculture Research System(CARS-01-27)+2 种基金the Key Research Program of Jiangsu Province,China(BE2016344)the earmarked fund for Jiangsu Agricultural Industry Technology System,China(JATS[2018]298)a project funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions,China
文摘Mechanical transplanting with carpet seedlings(MC) and mechanical direct seeding(MD) are newly developed planting methods, which increase in popularity and planted area each year. Knowing the difference for yield and rice quality under different planting methods is of great importance for the development of high quality and yield cultivation techniques under mechanical conditions. Therefore, three kinds of japonica rice including hybrid japonica rice, inbreed japonica rice, and soft rice were adopted as materials. And the differences in the quality of processing, appearance, cooking and eating quality, nutrition, and the rapid viscosity analyzer(RVA) profile were studied to reveal the effects of planting methods on yield and quality of different types of japonica rice. Results showed that the milled rice and head rice rates under MC was significantly higher than those under MD, and the processing quality of inbreed japonica rice was the most stable. Compared with MC, length/width ratio of rice under MD was significantly increased, and chalkiness rate, size, and degree were significantly decreased. The protein content under MD was lower than that under MC. MC showed higher peak viscosity and breakdown value than MD. The taste value was the greatest for soft rice, followed by inbreed japonica rice, and then by japonica hybrid rice, with no significant differences resulting from planting methods. Compared with MC, MD significantly improved the appearance quality, though processing quality and nutritional quality were decreased. And there was no significant difference in cooking and eating quality between MC and MD. Under different planting methods, the appearance quality of inbreed japonica rice changed the most and the processing quality was the most stable. The nutritional, cooking and eating quality of soft rice changed the least. Therefore, according to the different planting methods and market needs, selecting the appropriate rice varieties can reduce the risks in rice production and achieve good rice quality.
基金financially supported by National Key Research and Development Program of China(2016YFD0100501)the National Natural Science Foundation of China(31871241,31371233)+3 种基金the Natural Science Foundation of Jiangsu Province(BE2017345,PZCZ201702,BE2018351)the Research and Innovation Program of Postgraduate in Jiangsu Province(KYCX17_1886)the Priority Academic Program Development of Jiangsu Higher Education Institutionsthe Yangzhou University International Academic Exchange Fund。
文摘High grain protein content(GPC) reduces rice eating and cooking quality(ECQ). We generated OsAAP6 and OsAAP10 knockout mutants in three high-yielding japonica varieties and one japonica line using the CRISPR/Cas9 system. Mutation efficiency varied with genetic background in the T_0 generation, and GPC in the T_1 generation decreased significantly,owing mainly to a reduction in glutelin content. Amylose content was down-regulated significantly in some Osaap6 and all Osaap10 mutants. The increased taste value of these mutants was supported by Rapid Visco Analysis(RVA) profiles, which showed higher peak viscosity and breakdown viscosity and lower setback viscosity than the wild type. There were no significant deficiencies in agronomic traits of the mutants. Targeted mutagenesis of OsAAP6 and OsAAP10, especially OsAAP10, using the CRISPR/Cas9 system can rapidly reduce GPC and improve ECQ of rice, providing a new strategy for the breeding cultivars with desired ECQ.
基金the National Key R&D Program of China(2016YFD0300505)the Rice Industry Technology System of Henan Province,China(S201204-G02)。
文摘Nitrogen is one of the important factors for high yield of rice.Apart from high yield,high quality has become the current urgent demand for rice production.Grain-filling stage is crucial for rice yield and quality formation.However,the effect of nitrogen on grain-filling characteristics and the relationship of grain-filling characteristics and rice quality of mid-season indica rice were still unclear.A field experiment was carried out to ascertain the critical grain-filling characteristics that contribute to rice milling quality,appearance quality and cooking and eating quality under nitrogen applications.The results showed that nitrogen applications prolonged the duration of superior and inferior grain filling.The mean grainfilling rate(G_(mean))and the maximum grain-filling rate(G_(max))of the inferior grains were positively correlated with chalky kernel rate,chalkiness,and amylose content.The time reaching the maximum grain-filling rate(T_(max)G)of the inferior grains was positively correlated with brown rice rate,milled rice rate,and head milled rice rate.Chalky kernel rate and chalkiness were negatively correlated with peak paste viscosity and breakdown viscosity.Less amylose content and more crude protein content were detected in nitrogen application of Liangyoupei 9 and Y Liangyou 2 both in 2016 and 2017.According to the correlation analysis,better cooking and eating quality of Y Liangyou 2 which had less amylose content might result from its higher G_(max)and G_(mean)of inferior grain than that of Liangyoupei 9 in the treatments of nitrogen application.These results indicated that the prolonging grain-filling duration and increasing grain weight at the maximum grain-filling rate of inferior grains contributed to the improvement of milling quality,appearance quality,and cooking and eating quality of mid-season indica rice under appropriate nitrogen applications.
基金This research was financially supported by the National Natural Science Foundation of China(Grant No.30270812).
文摘The BIL (backcross inbred line) population derived from the cross between Koshihikari (good eating and cooking quality, japonica) and Kasalath (poor quality, indica) was used to analyze the QTLs for amylose content (AC), gelatinization temperature (GT), gel consistency (GC) and protein content (PC). Eight main-effect QTLs including 2 for AC, 3 for GT, 2 for GC and 1 for PC were identified, Moreover, 27 epistatic QTL pairs including 7 for AC, 5 for GT, 4 for GC and 11 for PC were also detected while for AC and GT, one main-effect QTL with a major gene was detected, respectively. Therefore, the main-effect QTL might be more responsible for the current variation than the epistetic QTL. The result indicated that the main-effect QTL is the primary genetic basis for those traits. However, for PC, the epistatic QTL explained a much greater portion of the total variation than main-effect QTL, suggesting that epistatic loci are the primary genetic basis for such trait. In the experiment, chromosome segment substitution lines (CSSLs) were used to confirm reliabilities of the main effect QTLs detected in BIL population. Of the 8 main-effect QTLs for 4 traits in BIL analysis, 6 were confirmed end 2 remained unconfirmed by CSSLs analysis.
基金Supported by National Natural Science Foundation of China(30900874)Natural Science Foundation of Hunan Province(11JJ3026)+1 种基金Excellent Youth Fund Project of Hunan Department of Education(13B052)Crop Science Open Fund Project(ZWKF201504)
文摘To ascertain the effect mechanism of high temperature after anthesis on rice quality, the experiment was conducted with two rice lines, the heat-tolerant line 996 and heat-sensitive line 4628, with high temperature and optimal temperature in the growth chamber to investigate the effect of high temperature stress after anthesis on rice appearance quality, milling quality, cooking and eating quality and starch granule structure of endo- sperm. The result showed that milled rice rate, head rice rate, amylose content and gel consistency of both lines decreased under high temperature stress after anthesis, while the ratio of grain length to width, chalky rate, chalkiness, protein content increased. Under high temperature treatments, gelatinization temperature, final viscosity, set back and peak time increased, breakdown decreased, Mg content and K content increased, Mg/K ra- tio decreased. Under same treatment, the extent of rice quality of heat tolerant line 996 affected by high temperature was lower than that of heat sensitive line 4628. Under high temperature stress after anthesis, starch granule arranged untightly, most of starch granules existed in the form of a single starch endosperm, refractive index decreased, transparency reduced, and led to the formation of chalk. Under high temperature stress af- ter anthesis, the increase of protein content, the decrease of Mg/K, the changes of rice RVA profile characteristics and starch granule structure of endosperm could be the main reason for the decrease of rice cooking and eating quality and appearance quality.
文摘An early-maturity indica rice variety Zhefu 49, whose grain quality and starch structure are sensitive to environmental temperature, was subjected to different temperatures (32℃ for high temperature and 22℃ for optimum temperature) at the grain filling stage in plant growth chambers, and the different expressions of three isoform genes (SBEI, SBEIII and SBE/V) encoding starch branching enzyme (SBE) in the endosperms were studied by the real-time fluorescence quantitative PCR (FQ-PCR) method. Effects of high temperature on the SBE expression in developing rice endosperrns were isoform-dependent. High temperature significantly down-regulated the expressions of SBEI and SBEIII, while up-regulated the expression of SBEIV. Compared with SBEIV and SBEIII, the expression of SBEI gene in Zhefu 49 rice endosperms was more sensitive to temperature variation at the grain filling stage. This study indicates that changes in weather/climate conditions especially temperature stress influence rice grain formation and its quality as evidenced by isoform expression.
基金CAPES(Coordination for the Improvement of Higher Education Personnel)(Financial Code 001)CNPq(National Council for Scientific Technological Development)+1 种基金FAPERGS-RS(Research Support Foundation of the State of Rio Grande do Sul)UFSM(Federal University of Santa Maria)-Research Group at Postharvest Innovation:Technology,Quality and Sustainability,for their financial contributions。
文摘Various post-harvest processes of rice are commonly employed,especially during the off-season,to ensure its consumption feasibility,which often affect the grain quality.Different forms of drying,storage and processing of rice are evaluated to identify their effects on grain quality.Microwave drying has emerged as an alternative to the widely-used intermittent-drying and fixed-bed-dryer methods of drying paddy rice.Control of drying-air temperatures(between 40℃ and 60℃)according to the rice variety can improve quality,especially for exotic varieties.Keeping stored grain in hygroscopic balance,with water content between 11%to 15%,at temperatures between 16℃ and 20℃ and with intergranular relative humidity near 60%,allows 12 months of storage in a controlled environment without significant deterioration.Other innovations,notably the application of artificial refrigeration to grain stored in bulk in vertical cylindrical silos and the use of impermeable packaging for storage,ensure the conservation of grain mass.The different stages and equipments used to obtain polished,brown and parboiled rice result in significant changes in the nutritional value of rice because of the removal of the outermost layers of the grains.Polishing reduces the nutritional value and physical homogeneity of rice.Brown rice retains more bioactive compounds and nutrients because it does not lose the outer layer of the grains in the polishing processes.Parboiled rice,although less nutritious than brown rice,has better grain integrity and milling yield and less loss of nutrients than white rice.
文摘Research on the effect of the nitrogen application rate on the balance of the nitrogen utilization, yield and quality of rice is common in South China but is relatively lacking in Northeast China, especially in the Liaohe Delta. In this study, Yanfeng 47 rice was planted in Panjin city, China, to explore the effect of six nitrogen rates (0, 160, 210, 260, 315 and 420 kg N/ha) on the nitrogen use efficiency, rice quality and grain yield of rice plants. The results showed that the application of an appropriate nitrogen rate (210-260 kg N/ha) remarkably increased the nitrogen use efficiency of rice plants, grain yield, rice milling quality and nutritional quality and resulted in a moderate rice eating quality. Although low nitrogen rates (160 kg N/ha) maintained a high rice eating quality, they decreased grain yield and other rice qualities, and excessive nitrogen (315 kg N/ha) increased rice appearance quality but significantly reduced the nitrogen use efficiency (p < 0.05), yield and eating quality of rice. Therefore, to produce rice in the Liaohe Delta <span style="font-family:Verdana;"><span style="font-family:Verdana;"><span style="font-family:Verdana;">by</span></span></span><span><span><span> an environmentally friendly method and guarantee rice with high quality and yield, the recommended nitrogen application rate is 210 kg N/ha.</span></span></span>
文摘The interplanting with zero-tillage of rice, i.e. direct sowing rice 10-20 days before wheat harvesting, and remaining about 30-cm high stubble after cutting wheat or rice with no tillage, is a new cultivation technology in wheat-rice rotation system. To study the effects of interplanting with zero tillage and straw manure on rice growth and quality, an experiment was conducted in a wheat-rotation rotation system. Four treatments, i.e. ZIS (Zero-tillage, straw manure and rice interplanting), Zt (Zero-tillage, no straw manure and rice interplanting), PTS (Plowing tillage, straw manure and rice transplanting), and PT (Plowing tillage, no straw manure and rice transplanting), were used. ZtS reduced plant height, leaf area per plant and the biomass of rice plants, but the biomass accumulation of rice at the late stage was quicker than that under conventional transplanting cultivation. In the first year (2002), there was no significant difference in rice yield among the four treatments. However, rice yield decreased in interplanting with zero-tillage in the second year (2003). Compared with the transplanting treatments, the number of filled grains per panicle decreased but l000-grain weight increased in interplanting with zero-tillage, which were the main factors resulting in higher yield, tnterplanting with zero-tillage improved the milling and appearance qualities of rice. The rates of milled and head rice increased while chalky rice rate and chalkiness decreased in interplanting with zero-tillage. Zero-tillage and interplanting also affected rice nutritional and cooking qualities. In 2002, ZIS showed raised protein content, decreased amylose content, softer gel consistency, resulting in improved rice quality. In 2003, zero-tillage and interplanting decreased protein content and showed similar amylose content as compared with transplanting treatments. Moreover, protein content in PTS was obviously increased in comparison with the other three treatments. The rice in interplanting with zero-tillage treatments had higher peak viscosity and breakdown, lower setback, showing better rice taste quality. The straw manure had no significant effect on rice viscosity under interplanting with zero-tillage, but had the negative influence on the rice taste quality under transplanting with plowing tillage.
文摘A total of 105 transgenic dce lines independently transformed with a pea ferritin gene (Fer) were previously obtained. After seven generations of selfing and β-glucuronidase (GUS) assisted selection, 82 transgenic lines with stable agronomic traits were got. Among the 82 transgenic lines, two high-iron transgenic rice lines Fer34 and Fer65, with the iron contents in the milled rice being 4.82 and 3.46 times of that of the wild type Xiushui 11, respectively were identified. In the two transgenic lines, the exogenous Fer gene was highly expressed, and inherited as a single locus. The transgene had no negative effect on the agronomic traits of rice plant, other mineral nutritional components, appearance quality and eating quality of the milled rice, indicating that these two lines were elite high-iron breeding lines. Furthermore, the practical application and further studies facilitating utilization of the two elite breeding lines were discussed.
文摘Effects of rolled leaf gene Rl(t) on grain quality characters of hybrid rice were analyzed by using three pairs of rolled leaf near-isogenic lines under two fertilizer treatments. Under normal fertilizer level (e.g. 450 kg urea per ha), head rice rates and milled rice recovery of rolled leaf hybrids were significantly higher than those of corresponding non-rolled crosses, while the chalky rice rate and chalkiness were all lower. Of the RVA profiles, the peak viscosity, the hot paste viscosity and the breakdown viscosity of the rolled were all higher than those of the corresponding non-rolled ones to various degrees. Increasing fertilizer application for promoting panicle development increased the brown, milled and head rice rates except for Shanyou 63, furthermore, significant difference of head rice rates existed between the rolled leaf Shanyou 559 and Shanyou 559; while the peak viscosity, the hot paste viscosity and the breakdown viscosity all decreased to different levels; changes of values of other characters had no apparent regularity. It suggested that Rl(t) could improve rice quality under certain conditions.
基金supported by the National Key Technology R & D Program of China (Grant No. 2006BA01A01-7)
文摘Taking the main parents (10 male sterile lines and 10 restorer lines) and their 100 combinations of japonica hybrid rice in northern China as materials, the relationships of parental indica-japonica indexes determined by the methods of the Cheng’s index as well as simple sequence repeat (SSR) markers with yield and grain quality traits of hybrid rice were studied. For the parents, the Cheng’s index (Chi) ranged from 13.5 to 19.3 and the indica index in SSR markers (ADi) were from 0.12 to 0.38. The classification of parents by Chi was not completely consistent with that by ADi. The Chi of male parent was more closely related to hybrid traits than that of female parent, as contrasted to ADi. At the same time, the difference between parents (PD) in Chi was more closely related to hybrid traits than that in ADi. The indica-japonica indexes of parents and their difference between parents appeared quadratic relationship to hybrid traits with the critical extremum. The directions of the correlation of indica-japonica indexes of parents and their differences with hybrid yield traits were on the opposition to those with hybrid grain quality traits. Therefore, the female parent should match the male parent moderately in indica-japonica index to obtain the optimum of hybrid traits, high yield as well as good quality.
文摘Plant type and grain quality are two major aspects in rice breeding. Using canonical correlation analysis and canonical redundancy analysis, the relationship between plant type traits and rice grain quality traits was studied with 100 crosses derived from 10 sterile lines × 10 restorer lines. There was a complex relationship between parts of the traits of the two aspects. The angle of the 2nd leaf from the top and single panicle weight played important roles in plant type system and amylose content and grain length in grain quality system. The angle of the 2nd leaf from the top, plant height and single panicle weight had a great effect on grain quality traits, and amylose content, brown rice rate and translucency were easily influenced by plant type traits. Selection index model indicated that japonica hybrid rice in Northern China with good quality was characterized by broad flag leaf and 2nd leaf from the top, narrow and short 3rd leaf from the top, low plant height, short culm, long and more panicles and low single panicle weight.
基金funded jointly by the National Natural Science Foundation of China(31171460,31371563,31571597,31471437,31261140364)the Major Fundamental Research Program of Natural Science Foundation of Jiangsu Higher Education Institutions,China(11KJA210003)+2 种基金the Jiangsu Planned Projects for Postdoctoral Research Funds,China(1501077C)the China Postdoctoral Science Foundation(2015M581870)the Priority Academic Program Development of Jiangsu Higher Education Institutions,China
文摘The increase of atmospheric carbon dioxide(CO_2) concentration adversely affect several quality traits of rice grains, but the biochemical mechanism remains unclear. The objectives of this study were to determine how changes in the source-sink relationship affected rice quality. Source-sink manipulation was achieved by free-air CO_2 enrichment from tillering to maturity and partial removal of spikelet at anthesis using a japonica rice cultivar Wuyunjing 23. Enrichment with CO_2 decreased the head rice percentage and protein concentration of milled rice, but increased the grain chalkiness. In contrast, spikelet removal resulted in a dramatic increase in the head rice percentage and protein concentration, and much less grain chalkiness. Neither CO_2 enrichment nor spikelet removal affected the starch content, but the distribution of starch granule size showed distinct treatment effects. O n average, spikelet removal decreased the percentage of starch granules of diameter 〉10 and 5–10 μm by 23.6 and 5.6%, respectively, and increased those with a diameter of 2–5 and 〈2 μm by 4.6 and 3.3%, respectively. In contrast, CO_2 elevation showed an opposite response: increasing the proportion of large starch granules(〉5 μm) and decreasing that of 〈5 μm. The starch pasting properties were affected by spikelet removal much more than by CO_2 elevation. These results indicated that the protein concentration and starch granule size played a role in chalkiness formation under these experimental conditions.