Studies on rickettsia-like organism (RLO)disease of tropical marine pearl oyster——Epidemiological investigation of RLO disease in larvae populations of maricultured Pinctada maxima

The epidemiological investigations on the disease and death in mature eggs, embryonic de- velopmental periods and larvae populations [including oocytes, fertilized ovum, early embryonic phase larvae (6 h), D-shaped phase larvae (24 h), early umbo phase larvae, umbo phase larvae, post um- bo phase larvae and eyespot phase larvae] in the Luhuitou Pearl Oyster Mariculture Farm of Sanya City, Hainan Province in April 1995 showed that there were two peaks of mortality rates which occurred in early umbo phase or umbo phase and post umbo phase (Figs 3-5 and Table 1) respectively from pre- embryonic developmental periods to larvae phases. It indicated that the onset and death of Pinctada maxima larvae populations followed a pattem of outbreak. Between the prevalence, intensity of RLO infection and the mortality rates of larvae populations were of obvious positively correlations. Generally, every peak of RLO infection is always follwed by a peak of mortality rate of larvae hosts, and the mor- tality rates of larvae hosts declined with the decreased RLO infection (see Figs 3-5 ). Under the trans- mission electron microscopy (TEM), no rickettsia-like organisms were discovered in oocytes, fertilized ovum and early embryonic phase larvae (6 h). The RLO inclusions occurred first in the D-shaped phase larvae (24 h) under histological examination. Absences of RLO in transmission electron exami- nation of oocytes of RLO-infected adult females, ferilized ovum and early embryonic phase larvae (6 h) indicated that RLO may not be transmitted transovarially. But RLO for host infection may be trans- mitted by contact transmission since RLO inclusions were first identified regularly in D-shaped phase larvae (24 h), while these D-shaped phase larvae were still unable to take food during hatching 24 hours. In addition, the result of epidemiological investigation showed that no odservable death occurred in D-shaped larvae populations, but early obvious death occurred in larvae populations in the seventh day after fertilization, in a rate of about 21. 8%. It indicated that there was a incubation peried from RLO infection for host (D-shaped phase larvae) to host onset and death occurred clinically.

Studies on rickettsia-like organism (RLO) disease of tropical marine pearl oyster-Epidemiological investigation of RLO disease in juvenile populations of maricultured Pinctada maxima

The death which occurred in juvenile population was a severe problem in the course ofPinctada maxima artificial culture. With the methods of field investigation, histological study and statistic analyses, the epidemiological study was carried out on the disease and death in juvenile populations of Pinctada maxima in the Xinying Pearl Oyster Mariculture Farm of Lingao County (for the A, B and C batches of cultured juveniles hanged in the sea) and the Xincun Pearl Oyster Mariculture Farm of Lingshui County (for the D batch of cultured juvenile hanged in the pond), Hainan Province from November 1993 to April 1995.The results show that the deaths which occurred in juvenile populations of Pinctada maxima presented an outbreak pattern. The peak of mortality rates, in general, occurred in 4-to 6-month old pearl oyster juveniles, and the mortality rates gradully declined with the extention of pearl oyster age after cul-turing 8 months. The correlation between the mortality rates of juvenile populations and mean body lengths of juvenile populations show that the mortality rate become higher under 4 cm of mean body lengths of juvenile population and become obvious declined over 5 cm of mean body lengths. The peak of mortality rate occurred in 1-3 cm of mean body lengths. The results of histological observation showed that rickettsia-like organism inclusions were common, histological widespread infective agent among every batches (A, B, C and D) of cultured juvenile populations. The mean severity indices (SI) of rickettsia-like organism (RLO) infection were positively correlated with mortality rates of juvenile populations. After or within every peaks of RLO infection were all accompanied with the peaks of mortality rates of host populations and the mortality rates declined with decreased RLO infection. So the evidences of histological observation and epidemiology in this study indicated that rickettsia-like organism (RLO) may be as an important pathogenic organism of disease and death of cultured Pinctada maxima. In addition, a few ciliates were discovered only in part of batch A of cultured juvenile population. The mortality rates in juvenile populations were not correlated with the weekly mean temperature and salinity of sea water.

Rickettsia-like organism infection associated with mass mortalities of blood clam, Tegillarca granosa, in the Yueqing Bay in China

A series of mass mortalities of the cultured blood clam, Tegillarca granosa, occurred in the Yueqing Bay of China from 2005 to 2009. An obligate intracellular prokaryote, designated as rickettsia-like organism （RLO）, was frequently found in the moribund or dead blood clam sample during ultra- structural examination. These organisms were usually round, ellipsoid or occasionally dumbbell- shaped, ranged from approximately 0.28 to 0.71 #m in size and had a trilaminar cell wall. Two reproductive modes of organisms, transverse binary fission and budding, were observed. The or- ganisms were able to form eosinophilic inclusions. Most inclusions were found within epithelial and connective tissues of the mantle, gills and digestive tube. The biological and morphological char- acteristics indicate that these organisms may belong to the family Rickettsiaceae. RLOs exhibited significant pathogenicity. Cytopathological examinations revealed extensive necrosis and destruc- tion in the infected cell. The degree of tissue destruction was positively related to the number of RLO inclusions in the tissues, and the cytopathological effects were positively related to the number of intracellular RLO. RLOs and their inclusions were discovered throughout different disease areas and in different time periods. The infection intensity of the RLOs was positively correlated with the mortality rate of clams. Therefore, RLO infection might be associated with mass mortalities of cultured blood clams in the Yueqing Bay.

Epidemiology and Clonal Spread Evidence of Carbapenem-Resistant Organisms in the Center of Care and Protection of Orphaned Children, Vietnam

Objective: To determine the prevalence of colonization and transmission of carbapenem-resistant Gram-negative organisms in order to develop of an effective infection prevention program. Design: Cross-sectional study with carbapenem-resistant organisms (CRO) colonization detection from the fecal specimens of 20 Health Care Workers (HCWs) and 67 residents and 175 random environment specimens from September 2022 to September 2023. Setting: A Care and Protection Centre of Orphaned Children in South of HCM City. Participants: It included 20 HCWs, 67 residents, and 175 randomly collected environmental specimens. Method: Rectal and environmental swabs were collected from 20 HCWs, 67 residents (most of them were children), and 175 environmental specimens. MELAB Chromogenic CARBA agar plates, Card NID, and NMIC-500 CPO of the BD Phoenix TM Automated Microbiology System and whole genome sequencing (WGS) were the tests to screen, confirm CROs, respectively and determine CRO colonization and transmission between HCWs, residents, and the environment. Result: We detected 36 CRO isolates, including 6, 11 and 19 CROs found in 6 HCWs, 10 residents and 19 environments. The prevalence of detectable CRO was 30% (6/20) in HCWs, 14.92% (10/67) in residents, and 10.86% (19/175) in environmental swabs in our study. WGS demonstrated CRO colonization and transmission with the clonal spread of E. coli and A. nosocomialis, among HCWs and residents (children). Conclusion: Significant CRO colonization and transmission was evident in HCWs, residents, and the center environment. Cleaning and disinfection of the environment and performing regular hand hygiene are priorities to reduce the risk of CRO colonization and transmission.

Screening of Polyphosphate Accumulating Organisms and Their Phosphorus Removal Performance

[Objectives]To study the phosphorus removal performance of phosphate accumulating organisms(PAOs).[Methods]Activated sludge from domestic sewage treatment plant was used as the strain source,and phosphate accumulating organisms were screened by plate streaking method and dilution coating plate method.Six kinds of excellent phosphate accumulating organisms were obtained by metachromatic granule staining experiment,total phosphorus experiment and simulated sewage phosphorus removal experiment to assist the observation of bac-terial morphology and experiment of phosphorus removal capacity.In addition,the influencing factors of phosphorus removal capacity(nitrogen source,trace metal ions)were analyzed.[Results]In the case of simulated sewage,the phosphorus removal rate of strain b was the highest,reaching 66.25%,while the phosphorus removal rate of strain e and f was about 10%lower than that of the phosphorus uptake experiment.[Conclusions]This study is expected to provide a theoretical reference for the gradual optimization of the screening method of phosphorus re-moval bacteria in domestic sewage treatment.

Incidence, risk factors and clinical outcome of multidrug-resistant organisms after heart transplantation

BACKGROUND Transplant recipients commonly harbor multidrug-resistant organisms(MDROs),as a result of frequent hospital admissions and increased exposure to antimi-crobials and invasive procedures.AIM To investigate the impact of patient demographic and clinical characteristics on MDRO acquisition,as well as the impact of MDRO acquisition on intensive care unit(ICU)and hospital length of stay,and on ICU mortality and 1-year mortality post heart transplantation.METHODS This retrospective cohort study analyzed 98 consecutive heart transplant patients over a ten-year period(2013-2022)in a single transplantation center.Data was collected regarding MDROs commonly encountered in critical care.RESULTS Among the 98 transplanted patients(70%male),about a third(32%)acquired or already harbored MDROs upon transplantation(MDRO group),while two thirds did not(MDRO-free group).The prevalent MDROs were Acinetobacter baumannii(14%),Pseudomonas aeruginosa(12%)and Klebsiella pneumoniae(11%).Compared to MDRO-free patients,the MDRO group was characterized by higher body mass index(P=0.002),higher rates of renal failure(P=0.017),primary graft dysfunction(10%vs 4.5%,P=0.001),surgical re-exploration(34%vs 14%,P=0.017),mechanical circulatory support(47%vs 26%P=0.037)and renal replacement therapy(28%vs 9%,P=0.014),as well as longer extracorporeal circulation time(median 210 vs 161 min,P=0.003).The median length of stay was longer in the MDRO group,namely ICU stay was 16 vs 9 d in the MDRO-free group(P=0.001),and hospital stay was 38 vs 28 d(P=0.006),while 1-year mortality was higher(28%vs 7.6%,log-rank-χ2:7.34).CONCLUSION Following heart transplantation,a predominance of Gram-negative MDROs was noted.MDRO acquisition was associated with higher complication rates,prolonged ICU and total hospital stay,and higher post-transplantation mortality.

Verify the Function of a Potential Growth-Regulating Gene in Marine Bivalve Using a Candidate Model Organism Mulinia lateralis

A better understanding of genetic bases of growth regulation is essential for bivalve breeding,which is helpful to improve the yield of the commercially important bivalves.While previous studies have identified some candidate genes accounting for variation in growth-related traits through genotype-phenotype association analyses,seldom of them have verified the functions of these putative,growth-related genes beyond the genomic level due to the difficulty of culturing commercial bivalves under laboratory conditions.Fortunately,dwarf surf clam Mulinia lateralis can serve as a model organism for studying marine bivalves given its short generation time,the feasibility of being grown under experimental conditions and the availability of genetic and biological information.Using dwarf surf clam as a model bivalve,we characterize E2F3,a gene that has been found to account for variation in growth in scallops by a previous genome-wide association study,and verify its function in growth regulation through RNA interference(RNAi)experiments.For the first time,E2F3 in dwarf surf clam,which is termed as MulE2F3,is characterized.The results reveal that dwarf surf clams with MulE2F3 knocked down exhibit a reduction in both shell size and soft-tissue weight,indicating the functions of MulE2F3 in positively regulating bivalve growth.More importantly,we demonstrate how dwarf surf clam can be used as a model organism to investigate gene functions in commercial bivalves,shedding light on genetic causes for variation in growth to enhance the efficiency of bivalve farming.

All‑Covalent Organic Framework Nanofilms Assembled Lithium‑Ion Capacitor to Solve the Imbalanced Charge Storage Kinetics

Free-standing covalent organic framework(COFs)nanofilms exhibit a remarkable ability to rapidly intercalate/de-intercalate Li^(+) in lithium-ion batteries,while simultaneously exposing affluent active sites in supercapacitors.The development of these nanofilms offers a promising solution to address the persistent challenge of imbalanced charge storage kinetics between battery-type anode and capacitor-type cathode in lithium-ion capacitors(LICs).Herein,for the first time,custom-made COFBTMB-TP and COFTAPB-BPY nanofilms are synthesized as the anode and cathode,respectively,for an all-COF nanofilm-structured LIC.The COFBTMB-TP nanofilm with strong electronegative–CF3 groups enables tuning the partial electron cloud density for Li^(+) migration to ensure the rapid anode kinetic process.The thickness-regulated cathodic COFTAPB-BPY nanofilm can fit the anodic COF nanofilm in the capacity.Due to the aligned 1D channel,2D aromatic skeleton and accessible active sites of COF nanofilms,the whole COFTAPB-BPY//COFBTMB-TP LIC demonstrates a high energy density of 318 mWh cm^(−3) at a high-power density of 6 W cm^(−3),excellent rate capability,good cycle stability with the capacity retention rate of 77%after 5000-cycle.The COFTAPB-BPY//COFBTMB-TP LIC represents a new benchmark for currently reported film-type LICs and even film-type supercapacitors.After being comprehensively explored via ex situ XPS,7Li solid-state NMR analyses,and DFT calculation,it is found that the COFBTMB-TP nanofilm facilitates the reversible conversion of semi-ionic to ionic C–F bonds during lithium storage.COFBTMB-TP exhibits a strong interaction with Li^(+) due to the C–F,C=O,and C–N bonds,facilitating Li^(+) desolation and absorption from the electrolyte.This work addresses the challenge of imbalanced charge storage kinetics and capacity between the anode and cathode and also pave the way for future miniaturized and wearable LIC devices.

Attention Markets of Blockchain-Based Decentralized Autonomous Organizations

The attention is a scarce resource in decentralized autonomous organizations(DAOs),as their self-governance relies heavily on the attention-intensive decision-making process of“proposal and voting”.To prevent the negative effects of pro-posers’attention-capturing strategies that contribute to the“tragedy of the commons”and ensure an efficient distribution of attention among multiple proposals,it is necessary to establish a market-driven allocation scheme for DAOs’attention.First,the Harberger tax-based attention markets are designed to facilitate its allocation via continuous and automated trading,where the individualized Harberger tax rate(HTR)determined by the pro-posers’reputation is adopted.Then,the Stackelberg game model is formulated in these markets,casting attention to owners in the role of leaders and other competitive proposers as followers.Its equilibrium trading strategies are also discussed to unravel the intricate dynamics of attention pricing.Moreover,utilizing the single-round Stackelberg game as an illustrative example,the existence of Nash equilibrium trading strategies is demonstrated.Finally,the impact of individualized HTR on trading strategies is investigated,and results suggest that it has a negative correlation with leaders’self-accessed prices and ownership duration,but its effect on their revenues varies under different conditions.This study is expected to provide valuable insights into leveraging attention resources to improve DAOs’governance and decision-making process.

Coupling of reduced inorganic fertilizer with plant-based organic fertilizer as a promising fertilizer management strategy for colored rice in tropical regions

Colored rice is a type of high-quality,high-added-value rice that has attracted increasing attention in recent years.The use of large amounts of inorganic nitrogen fertilizer in rice fields results in low fertilizer use efficiency and high environmental pollution.Organic fertilizer is a promising way to improve soil quality and sustain high yields.However,most studies focus on the effect of animal-based organic fertilizers.The effects of different ratios of plantbased organic fertilizer and inorganic fertilizer on the grain yield and quality of colored rice have rarely been reported.Therefore,a two-year field experiment was conducted in 2020 and 2021 to study the effects of replacing inorganic N fertilizers with plant-based organic fertilizers on the yield,nitrogen use efficiency(NUE),and anthocyanin content of two colored rice varieties in a tropical region in China.The experimental treatments included no nitrogen fertilization(T1),100% inorganic nitrogen fertilizer(T2),30%inorganic nitrogen fertilizer substitution with plant-based organic fertilizer(T3),60%inorganic nitrogen fertilizer substitution with plant-based organic fertilizer(T4),and 100% plantbased organic fertilizer(T5).The total nitrogen provided to all the treatments except T1 was the same at 120 kg ha-1.Our results showed that the T3 treatment enhanced the grain yield and anthocyanin content of colored rice by increasing nitrogen use efficiency compared with T2.On average,grain yields were increased by 9 and 8%,while the anthocyanin content increased by 16 and 10% in the two colored rice varieties under T3 across the two years,respectively,as compared with T2.Further study of the residual effect of partial substitution of inorganic fertilizers showed that the substitution of inorganic fertilizer with plant-based organic fertilizer improved the soil physiochemical properties,and thus increased the rice grain yield,in the subsequent seasons.The highest grain yield of the subsequent rice crop was observed under the T5 treatment.Our results suggested that the application of plantbased organic fertilizers can sustain the production of colored rice with high anthocyanin content in tropical regions,which is beneficial in reconciling the relationship between rice production and environmental protection.

A review of physicochemical properties of dissolved organic carbon and its impact over mountain glaciers

Investigating the characteristics and transformation of water-soluble carbonaceous matter in the cryosphere regions is important for understanding biogeochemical process in the earth system.Water-soluble carbonaceous matter is a heterogeneous mixture of organic compounds that is soluble in aquatic environments.Despite its importance,we still lack systematic understanding for dissolved organic carbon(DOC)in several aspects including exact chemical composition and physical interactions with microorganisms,glacier meltwater.This review presents the chemical composition and physical properties of glacier DOC deposited through anthropogenic emission,terrestrial,and biogenic sources.We present the molecular composition of DOC and its effect over snow albedo and associated radiative forcings.Results indicate that DOC in snow/ice is made up of aromatic protein-like species,fulvic acid-like materials,and humic acid-like materials.Light-absorbing impurities in surface snow and glacier ice cause considerable albedo reduction and the associated radiative forcing is definitely positive.Water-soluble carbonaceous matter dominated the carbon transport in the high-altitude glacial area.Owing to prevailing global warming and projected increase in carbon emission,the glacial DOC is expected to release,which will have strong underlying impacts on cryosphere ecosystem.The results of this work have profound implications for better understanding the carbon cycle in high altitude cryosphere regions.A new compilation of globally distributed work is required,including large-scale measurements of glacial DOC over high-altitude cryosphere regions,to overcome and address the scientific challenges to constrain climate impacts of light-absorbing impurities related processes in Earth system and climate models.

Challenges and Opportunities in Preserving Key Structural Features of 3D-Printed Metal/Covalent Organic Framework

Metal-organic framework(MOF)and covalent organic framework(COF)are a huge group of advanced porous materials exhibiting attractive and tunable microstructural features,such as large surface area,tunable pore size,and functional surfaces,which have significant values in various application areas.The emerging 3D printing technology further provides MOF and COFs(M/COFs)with higher designability of their macrostructure and demonstrates large achievements in their performance by shaping them into advanced 3D monoliths.However,the currently available 3D printing M/COFs strategy faces a major challenge of severe destruction of M/COFs’microstructural features,both during and after 3D printing.It is envisioned that preserving the microstructure of M/COFs in the 3D-printed monolith will bring a great improvement to the related applications.In this overview,the 3D-printed M/COFs are categorized into M/COF-mixed monoliths and M/COF-covered monoliths.Their differences in the properties,applications,and current research states are discussed.The up-to-date advancements in paste/scaffold composition and printing/covering methods to preserve the superior M/COF microstructure during 3D printing are further discussed for the two types of 3D-printed M/COF.Throughout the analysis of the current states of 3D-printed M/COFs,the expected future research direction to achieve a highly preserved microstructure in the 3D monolith is proposed.

Step‑by‑Step Modulation of Crystalline Features and Exciton Kinetics for 19.2%Efficiency Ortho‑Xylene Processed Organic Solar Cells

With plenty of popular and effective ternary organic solar cells(OSCs)construction strategies proposed and applied,its power conversion efficiencies(PCEs)have come to a new level of over 19%in single-junction devices.However,previous studies are heavily based in chloroform(CF)leaving behind substantial knowledge deficiencies in understanding the influence of solvent choice when introducing a third component.Herein,we present a case where a newly designed asymmetric small molecular acceptor using fluoro-methoxylated end-group modification strategy,named BTP-BO-3FO with enlarged bandgap,brings different morphological evolution and performance improvement effect on host system PM6:BTP-eC9,processed by CF and ortho-xylene(o-XY).With detailed analyses supported by a series of experiments,the best PCE of 19.24%for green solvent-processed OSCs is found to be a fruit of finely tuned crystalline ordering and general aggregation motif,which furthermore nourishes a favorable charge generation and recombination behavior.Likewise,over 19%PCE can be achieved by replacing spin-coating with blade coating for active layer deposition.This work focuses on understanding the commonly met yet frequently ignored issues when building ternary blends to demonstrate cutting-edge device performance,hence,will be instructive to other ternary OSC works in the future.

Combined Promoting Effects of Specific Organic Functional Groups and Alumina Surface Characteristics for the Design of a Highly Efficient NiMo/Al_(2)O_(3) Hydrodesulfurization Catalyst

To prepare a highly efficient NiMo/Al_(2)O_(3) hydrodesulfurization catalyst,the combined effects of specific organic functional groups and alumina surface characteristics were investigated.First,the correlation between the surface characteristics of four different alumina and the existing Mo species states was established.It was found that the Mo equilibrium adsorption capacity can be used as a specific descriptor to quantitatively evaluate the changes in surface characteristics of different alumina.A lower Mo equilibrium adsorption capacity for alumina means weaker metal-support interaction and the loaded Mo species are easier to transform into MoS2.However,the Mo-O-Al bonds still exist at the metal-support interface.The introduction of cationic surfactant hecadecyl trimethyl ammonium bromide(CTAB)can further improve Mo species dispersion through electrostatic attraction with Mo anions and interaction of its alkyl chain with the alumina surface;meanwhile,the introduction of ethylenediamine tetraacetic acid(EDTA)can complex with Ni ions to enhance the Ni-promoting effect on Mo.Therefore,the NiMo catalyst designed using alumina with lower Mo equilibrium adsorption capacity and the simultaneous addition of EDTA and CTAB exhibits the highest hydrodesulfurization activity for 4,6-dimethyl dibenzothiophene because of its proper metal-support interaction and more well-dispersed Ni-Mo-S active phases.

Prevalence of Some World Health Organization Priority Organisms from an Abattoir at Kwata, Anambra State, Nigeria

The abattoir is one of the important sectors in the food industry, therefore the need for close monitoring of everything concerning it to minimize microbial contamination. The aim of the study is to identify bacteria listed as WHO priority organisms associated with meat from Kwata abattoir in Awka, Anambra state. The study was carried out over a three (3) months period from September to December 2022. Thirteen samples were collected from the floor, table, water, meat, knife and soil in the abattoir. The samples were cultured using streak and spread plate methods on MacConkey and Cetrimide agar. The isolates were identified with the following biochemical tests: catalase, oxidase, citrate and indole tests. Ampiclox levofloxacin, gentamicin, ofloxacin impenem ceftraixone, cefixime, cefuroxime and nitrofurantoin were used for sensitivity test following Kirby Bauer disc diffusion method and biofilm formation was determined using the tube method. The 75 isolates obtained were identified as follows;29.3% E. coli, 26.7% Klebsiella spp., 16% Proteus spp., and 28% Pseudomonas spp. The result of antibiotics sensitivity test interpreted using the European Committee on Antimicrobial Susceptibility Testing (EUCAST) breakpoints showed that (98%) of the isolates were resistant to the antibiotics used. Test for biofilm formation with 52 isolates showed 31 strong, 12 moderate and 9 weak biofilm formers. The result of this study confirms the presence of bacteria contaminants within the WHO priority list in the abattoir, as such there is need for improved handling of animals. Slaughtering, cleaning and distribution of meat should be done using aseptic procedures. .

Unveiling Organic Electrode Materials in Aqueous Zinc-Ion Batteries:From Structural Design to Electrochemical Performance

Aqueous zinc-ion batteries(AZIBs)are one of the most compelling alternatives of lithium-ion batteries due to their inherent safety and economics viability.In response to the growing demand for green and sustainable energy storage solutions,organic electrodes with the scalability from inexpensive starting materials and potential for biodegradation after use have become a prominent choice for AZIBs.Despite gratifying progresses of organic molecules with electrochemical performance in AZIBs,the research is still in infancy and hampered by certain issues due to the underlying complex electrochemistry.Strategies for designing organic electrode materials for AZIBs with high specific capacity and long cycling life are discussed in detail in this review.Specifically,we put emphasis on the unique electrochemistry of different redox-active structures to provide in-depth understanding of their working mechanisms.In addition,we highlight the importance of molecular size/dimension regarding their profound impact on electrochemical performances.Finally,challenges and perspectives are discussed from the developing point of view for future AZIBs.We hope to provide a valuable evaluation on organic electrode materials for AZIBs in our context and give inspiration for the rational design of high-performance AZIBs.

Multiple enrichment mechanisms of organic matter in the Fengcheng Formation of Mahu Sag,Junggar Basin,NW China

Based on core and thin section data,the source rock samples from the Fengcheng Formation in the Mahu Sag of the Junggar Basin were analyzed in terms of zircon SIMS U-Pb geochronology,organic carbon isotopic composition,major and trace element contents,as well as petrology.Two zircon U-Pb ages of(306.0±5.2)Ma and(303.5±3.7)Ma were obtained from the first member of the Fengcheng Formation.Combined with carbon isotopic stratigraphy,it is inferred that the depositional age of the Fengcheng Formation is about 297-306 Ma,spanning the Carboniferous-Permian boundary and corresponding to the interglacial period between C4 and P1 glacial events.Multiple increases in Hg/TOC ratios and altered volcanic ash were found in the shale rocks of the Fengcheng Formation,indicating that multiple phases of volcanic activity occurred during its deposition.An interval with a high B/Ga ratio was found in the middle of the second member of the Fengcheng Formation,associated with the occurrence of evaporite minerals and reedmergnerite,indicating that the high salinity of the water mass was related to hydrothermal activity.Comprehensive analysis suggests that the warm and humid climate during the deposition of Fengcheng Formation is conducive to the growth of organic matter such as algae and bacteria in the lake,and accelerates the continental weathering,driving the input of nutrients.Volcanic activities supply a large amount of nutrients and stimulate primary productivity.The warm climate and high salinity are conducive to water stratification,leading to water anoxia that benefits organic matter preservation.The above factors interact and jointly control the enrichment of organic matter in the Fengcheng Formation of Mahu Sag.

Microplastics in Marine Environment: Occurrence, Distribution, and Extraction Methods in Marine Organisms

The pervasive presence of microplastics in marine environments has raised significant concerns. This review addresses the pressing issue of microplastic pollution in marine ecosystems and its potential implications for both the environment and human health. It outlines the current state of microplastic occurrence, distribution, and extraction methods within marine organisms. Microplastics have emerged as a significant environmental concern due to their harmful effects on ecosystems and their potential human health risks. These particles infiltrate marine environments through runoff and atmospheric deposition, ultimately contaminating beaches and posing threats to marine life. Despite the gravity of this issue, there has been limited research on the presence and distribution of microplastics in marine organisms. This review aims to bridge this knowledge gap by comprehensively examining the occurrence, distribution, and various extraction methods used to detect microplastics in marine organisms. It emphasizes the urgent need for targeted measures to manage microplastic pollution, highlights the significant role of human activities in contributing to this problem, and underscores the importance of reducing human-induced pollution to safeguard marine ecosystems. While this paper contributes to the understanding of microplastic pollution in marine environments and underscores the critical importance of taking action to protect marine organisms and preserve our oceans for future generations, it also emphasizes that, in effectively tackling the microplastic problem, a well-coordinated approach is essential, involving research initiatives, policy adjustments, public involvement, and innovative technologies. Crucially, prompt and resolute responses must exist to counteract the escalating peril posed by microplastics to the oceans and the global environment.

Assessing Earthworm Influence on Remediating Potentials of Soil Micro-Organisms, and Bioavailable Hydrocarbon Pollutant in the Niger Delta, Nigeria

In the Niger Delta region of Nigeria, oil explorations and exploitations abound, causing environmental pollution with serious consequences on soil ecosystem and its biodiversity. In spite of the relationship between microbes and fauna in soil ecosystem, such that both organisms can metabolize certain range of petroleum hydrocarbon substrates with the fauna influencing the remediation potentials of bacteria, yet soil fauna is still not fully considered in bioremediation. The influence of earthworm;Lumbricus terrestris on the remediating potentials of soil bacteria in petroleum hydrocarbon contaminated soils was investigated. Eighteen pots were filled with 700 g of soil each, with nine treated with mixture of 3 levels crude oil and remediated with earthworm, while the other nine had no earthworm. The total petroleum hydrocarbon (TPH), soil physical, nutrient compositions, and TPH degrading bacteria biodiversity were determined before contamination or commencement of study and thirty days after. The results showed a decrease in TPH concentration of 55.58%, 62.57% and 67.07% in 1 ml, 2 ml and 3 ml crude oil contaminated soil, respectively. Species richness and abundance of bacteria organisms increased with high relative abundance in soils remediated with earthworms, hydrocarbon utilizing bacteria increased from less than 0.1 cfu/g to 0.4 cfu/g, and total heterotrophic bacteria 1.6 cfu/g at the end of the study. Earthworms increased rate of remediation potentials of bacteria, such that within 30 days post remediation treatment, 34.14% of reduced concentration was achieved over soil samples without earthworms at 3 ml, and 25.14% at 2 ml concentration. Reduction in pH levels in remediated soils was between 6.39 to 6.17 and 6.74 to 6.72 in unremediated soils, while moisture content was 6.73% to 6.77% unremediated and 5.85% to 6.62% in earthworm remediated soils. Total organic carbon, nitrates in soils inoculated with earthworms were lower in concentration than those without earthworms. Reverse was the case with potassium, phosphate and phosphorous concentrations which were above those without earthworms. Results indicate statistically, significant difference between reduction in TPH in earthworm remediated soils and unremediated soils, pointing out that earthworm is a good candidate for facilitation of bacteria remediation-petroleum hydrocarbon contamination.

Manipulating the Macroscopic and Microscopic Morphology of Large-Area Gravure-Printed ZnO Films for High-Performance Flexible Organic Solar Cells

Gravure printing is a promising large-scale fabrication method for flexible organic solar cells(FOSCs)because it is compatible with two-dimension patternable roll-to-roll fabrication.However,the unsuitable rheological property of ZnO nanoinks resulted in unevenness and looseness of the gravure-printed ZnO interfacial layer.Here we propose a strategy to manipulate the macroscopic and microscopic of the gravure-printed ZnO films through using mixed solvent and poly(vinylpyrrolidone)(PVP)additive.The regulation of drying speed effectively manipulates the droplets fusion and leveling process and eliminates the printing ribbing structure in the macroscopic morphology.The additive of PVP effectively regulates the rheological property and improves the microscopic compactness of the films.Following this method,large-area ZnO∶PVP films(28×9 cm^(2))with excellent uniformity,compactness,conductivity,and bending durability were fabricated.The power conversion efficiencies of FOSCs with gravure-printed AgNWs and ZnO∶PVP films reached 14.34%and 17.07%for the 1 cm^(2)PM6:Y6 and PM6∶L8-BO flexible devices.The efficiency of 17.07%is the highest value to date for the 1 cm^(2)FOSCs.The use of mixed solvent and PVP addition also significantly enlarged the printing window of ZnO ink,ensuring high-quality printed thin films with thicknesses varying from 30 to 100 nm.