This study was conducted to investigate the flow field characteristics of right-angled flow passage with various cavities in the typical hydraulic manifold block.A low-speed visualization test rig was developed and th...This study was conducted to investigate the flow field characteristics of right-angled flow passage with various cavities in the typical hydraulic manifold block.A low-speed visualization test rig was developed and the flow field of the right-angled flow passage with different cavity structures was measured using 2D-PIV technique.Numerical model was established to simulate the three-dimensional flow field.Seven eddy viscosity turbulence models were investigated in predicting the flow field by comparing against the particle image relocimetry(PIV)measurement results.By defining the weight error function K,the S-A model was selected as the appropriate turbulence model.Then,a three-factor,three-level response surface numerical test was conducted to investigate the influence of flow passage connection type,cavity diameter and cavity length-diameter ratio on pressure loss.The results show that the Box-Benhnken Design(BBD)model can predict the total pressure loss accurately.The optimal factor level appeared in flow passage connection type II,14.64 mm diameter and 67.53%cavity length-diameter ratio.The total pressure loss decreased by 11.15%relative to the worst factor level,and total pressure loss can be reduced by 64.75%when using an arc transition right-angled flow passage,which indicates a new direction for the optimization design of flow passage in hydraulic manifold blocks.展开更多
Groins are employed to prevent nearshore areas from erosion and to control the direction of flow. However, the groin structure and its associated flow characteristics are the main causes of local erosion. In this stud...Groins are employed to prevent nearshore areas from erosion and to control the direction of flow. However, the groin structure and its associated flow characteristics are the main causes of local erosion. In this study, we investigate the flow patterns around refractive and right-angle groins. In particular, we analytically compare the flow characteristics around a refractive groin and study the degree of accuracy that can be achieved by using a right-angle groin of various projected lengths. To compare the flow characteristics, we replaced the right-angle groin with an approximation of a refractive groin. This replacement had the least effect on the maximum velocity of flow in the channel. Moreover, we investigated the distribution of the density variables of temperature and salinity, and their effects on the flow characteristics around the right-angle groin. A comparison of the flow analysis results in baroclinic and barotropic conditions reveals that the flow characteristic values are very similar for both the refractive and right-angle groins. The geometry of the groin, i.e., right-angle or refractive, has little effect on the maximum speed to relative average speed. Apart from the angular separation, the arm length of the groin in downstream refractive groins has less effect on other flow characteristics than do upstream refractive groins. We also correlated a number of non-dimensional variables with respect to various flow characteristics and groin geometry. These comparisons indicate that the correlation between the thalweg height and width of the channel and groin arm＇s length to projection length have been approximated using linear and nonlinear formulas regardless of inner velocity in the subcritical flow.展开更多
AIM:To investigate the effect of using base-out prisms on nystagmus,visual acuity and contrast sensitivity in patients with albinism.METHODS:In this interventional study,patients with albinism who had nystagmus were e...AIM:To investigate the effect of using base-out prisms on nystagmus,visual acuity and contrast sensitivity in patients with albinism.METHODS:In this interventional study,patients with albinism who had nystagmus were enrolled.A comprehensive eye exam was conducted,which included refraction,assessment of far and near vision acuity,and contrast sensitivity measurements.To check for the nystagmus,a videonystagmography was used.The tests were carried out in three modes:without any correction,with optical correction,and with correction using base-out prisms in three different powers,including 4,6,and 8 prism diopters.RESULTS:Totally 23 patients with average age of 28.65±12.13 were examined.It was found that the use of optical correction and optical correction with prisms resulted in a statistically significant improvement in both far(at least:P<0.006)and near visual acuity(at least:P<0.001 except for prism 8;P<0.02).In addition,contrast sensitivity significantly improved at all low and medium frequencies except for correction with prism 8 in frequency 1.5(at least:P<0.01 except for prism 4,frequency 6;P=0.04).no significant improvement was observed in the evaluation of nystagmus characteristics.CONCLUSION:Optical correction with a prism can improve visual acuity and some spatial frequencies,but failed to improve nystagmus parameters.展开更多
The achievements made in China in the field of the theory of conjugation for reflecting prisms are outlined which mainly includes 6 theorems, 2 corollaries, over 30 formulae, 4 matric operators, 20 characteristic para...The achievements made in China in the field of the theory of conjugation for reflecting prisms are outlined which mainly includes 6 theorems, 2 corollaries, over 30 formulae, 4 matric operators, 20 characteristic parameters, a new principle for dassification, and a new system of graphical tabulation for reflecting prisms. As an approach to developing the theory, an imaginary physical model called 'rigid body's kinematics model' has been creatively initiated to simulate the real physical phenomena of both image formation and image motion for reflecting prisms. Such a method of treatment has been successfully making the evolving theory more complete, more systematic, more generalized, and unique as well.展开更多
Starting from the utilization and protection of local knowledge, with the performance prism as the framework, the evaluation index system of tourist satisfaction degree was established. The weight was determined by us...Starting from the utilization and protection of local knowledge, with the performance prism as the framework, the evaluation index system of tourist satisfaction degree was established. The weight was determined by using AHP method. Finally, the investigating result was judged with fuzzy comprehensive evaluation method, the evaluation model of tourist satisfaction degree in western tourist area was built, and the case study was carried out. With Lijiang in Yunnan Province as example, according to AHP method, five dimensions weight of the performance prism, various KPI weight and consistency were obtained, fuzzy evaluation on tourist satisfaction degree was conducted. The results showed that the overall was satisfactory, but there were still some problems. Aiming at the utilization and protection of local knowledge, some corresponding countermeasures were put forward which will benefit for further development of tourism in Lijiang of Yunnan Province.展开更多
In this paper, the generative approach utilizes recursion to generate process sequence for a part, and then match detail procedure design and select process equipment. A set of recursive formulas are found. Finally ...In this paper, the generative approach utilizes recursion to generate process sequence for a part, and then match detail procedure design and select process equipment. A set of recursive formulas are found. Finally a complete process program is produced. The method is simple than that of the knowledge system, the artificial neural networks and variant approach computer aided process planning(VACAPP).展开更多
基金Projects(51705446,51890881) supported by the National Natural Science Foundation of China
文摘This study was conducted to investigate the flow field characteristics of right-angled flow passage with various cavities in the typical hydraulic manifold block.A low-speed visualization test rig was developed and the flow field of the right-angled flow passage with different cavity structures was measured using 2D-PIV technique.Numerical model was established to simulate the three-dimensional flow field.Seven eddy viscosity turbulence models were investigated in predicting the flow field by comparing against the particle image relocimetry(PIV)measurement results.By defining the weight error function K,the S-A model was selected as the appropriate turbulence model.Then,a three-factor,three-level response surface numerical test was conducted to investigate the influence of flow passage connection type,cavity diameter and cavity length-diameter ratio on pressure loss.The results show that the Box-Benhnken Design(BBD)model can predict the total pressure loss accurately.The optimal factor level appeared in flow passage connection type II,14.64 mm diameter and 67.53%cavity length-diameter ratio.The total pressure loss decreased by 11.15%relative to the worst factor level,and total pressure loss can be reduced by 64.75%when using an arc transition right-angled flow passage,which indicates a new direction for the optimization design of flow passage in hydraulic manifold blocks.
文摘Groins are employed to prevent nearshore areas from erosion and to control the direction of flow. However, the groin structure and its associated flow characteristics are the main causes of local erosion. In this study, we investigate the flow patterns around refractive and right-angle groins. In particular, we analytically compare the flow characteristics around a refractive groin and study the degree of accuracy that can be achieved by using a right-angle groin of various projected lengths. To compare the flow characteristics, we replaced the right-angle groin with an approximation of a refractive groin. This replacement had the least effect on the maximum velocity of flow in the channel. Moreover, we investigated the distribution of the density variables of temperature and salinity, and their effects on the flow characteristics around the right-angle groin. A comparison of the flow analysis results in baroclinic and barotropic conditions reveals that the flow characteristic values are very similar for both the refractive and right-angle groins. The geometry of the groin, i.e., right-angle or refractive, has little effect on the maximum speed to relative average speed. Apart from the angular separation, the arm length of the groin in downstream refractive groins has less effect on other flow characteristics than do upstream refractive groins. We also correlated a number of non-dimensional variables with respect to various flow characteristics and groin geometry. These comparisons indicate that the correlation between the thalweg height and width of the channel and groin arm＇s length to projection length have been approximated using linear and nonlinear formulas regardless of inner velocity in the subcritical flow.
文摘AIM:To investigate the effect of using base-out prisms on nystagmus,visual acuity and contrast sensitivity in patients with albinism.METHODS:In this interventional study,patients with albinism who had nystagmus were enrolled.A comprehensive eye exam was conducted,which included refraction,assessment of far and near vision acuity,and contrast sensitivity measurements.To check for the nystagmus,a videonystagmography was used.The tests were carried out in three modes:without any correction,with optical correction,and with correction using base-out prisms in three different powers,including 4,6,and 8 prism diopters.RESULTS:Totally 23 patients with average age of 28.65±12.13 were examined.It was found that the use of optical correction and optical correction with prisms resulted in a statistically significant improvement in both far(at least:P<0.006)and near visual acuity(at least:P<0.001 except for prism 8;P<0.02).In addition,contrast sensitivity significantly improved at all low and medium frequencies except for correction with prism 8 in frequency 1.5(at least:P<0.01 except for prism 4,frequency 6;P=0.04).no significant improvement was observed in the evaluation of nystagmus characteristics.CONCLUSION:Optical correction with a prism can improve visual acuity and some spatial frequencies,but failed to improve nystagmus parameters.
文摘The achievements made in China in the field of the theory of conjugation for reflecting prisms are outlined which mainly includes 6 theorems, 2 corollaries, over 30 formulae, 4 matric operators, 20 characteristic parameters, a new principle for dassification, and a new system of graphical tabulation for reflecting prisms. As an approach to developing the theory, an imaginary physical model called 'rigid body's kinematics model' has been creatively initiated to simulate the real physical phenomena of both image formation and image motion for reflecting prisms. Such a method of treatment has been successfully making the evolving theory more complete, more systematic, more generalized, and unique as well.
基金Supported by 2008 National Social Science Fund (08BMZ042)~~
文摘Starting from the utilization and protection of local knowledge, with the performance prism as the framework, the evaluation index system of tourist satisfaction degree was established. The weight was determined by using AHP method. Finally, the investigating result was judged with fuzzy comprehensive evaluation method, the evaluation model of tourist satisfaction degree in western tourist area was built, and the case study was carried out. With Lijiang in Yunnan Province as example, according to AHP method, five dimensions weight of the performance prism, various KPI weight and consistency were obtained, fuzzy evaluation on tourist satisfaction degree was conducted. The results showed that the overall was satisfactory, but there were still some problems. Aiming at the utilization and protection of local knowledge, some corresponding countermeasures were put forward which will benefit for further development of tourism in Lijiang of Yunnan Province.
文摘In this paper, the generative approach utilizes recursion to generate process sequence for a part, and then match detail procedure design and select process equipment. A set of recursive formulas are found. Finally a complete process program is produced. The method is simple than that of the knowledge system, the artificial neural networks and variant approach computer aided process planning(VACAPP).
