Designing a Dual-Feed Circular Polarization Antenna

This paper describes a novel dual-feed circularly polarized antenna,and the dual feeding mode is realized by grooving on the antenna radiator.The antenna utilizes air dielectric material to meet the requirements of low weight and cost.Test results demonstrate that the antenna exhibits capacitive loading between the metal antenna patch and the ground floor,allowing for adjustment of the working frequency of the dual-feed circularly polarized microstrip antenna.Specifically,the original center frequency of 2.264 GHz was reduced to 1.582 GHz,facilitating antenna miniaturization and broad bandwidth.With a return loss(S11)below-10 dB,a bandwidth of 72 MHz(1.552-1.624 GHz)was obtained.Additionally,the dual-feed microstrip antenna incorporates a 90°bridge,resulting in circular polarization gains of 2.26 dBi at 1.561 GHz and 2.45 dBi at 1.575 GHz.Overall,the antenna design offers a large working bandwidth and excellent circular polarization characteristics,making it suitable for a wide range of applications in satellite navigation and positioning terminals.

Dynamic phase assembled terahertz metalens for reversible conversion between linear polarization and arbitrary circular polarization

If a metalens integrates the circular polarization(CP)conversion function,the focusing lens together with circular-polariz-ing lens(CPL)in traditional cameras may be replaced by a metalens.However,in terahertz(THz)band,the reported metalenses still do not obtain the perfect and strict single-handed CP,because they were constructed via Pancharatnam-Berry phase so that CP conversion contained both left-handed CP(LCP)and right-handed CP(RCP)components.In this paper,a silicon based THz metalens is constructed using dynamic phase to obtain single-handed CP conversion.Also,we can rotate the whole metalens at a certain angle to control the conversion of multi-polarization states,which can simply manipulate the focusing for incident linear polarization(LP)THz wave in three polarization conversion states,in-cluding LP without conversion,LCP and RCP.Moreover,the polarization conversion behavior is reversible,that is,the THz metalens can convert not only the LP into arbitrary single-handed CP,but also the LCP and RCP into two perpen-dicular LP,respectively.The metalens is expected to be used in advanced THz camera,as a great candidate for tradi-tional CPL and focusing lens group,and also shows potential application in polarization imaging with discriminating LCP and RCP.

Wide-band circular polarization-keeping reflection mediated by metasurface

In this paper, we show that circular polarization-keeping reflection can be achieved using reflective metasurfaces. The underlying physical mechanism of the polarization-keeping reflection is analyzed using a reflection matrix. A wideband circular polarization-keeping reflector is demonstrated using N-shaped resonators. Both the simulation and experiment results show that the polarization-keeping reflection can be achieved with a high efficiency larger than 98% over the frequency range from 9.2 GHz to 17.7 GHz for both incident left- and right-handed circularly polarized waves. Under oblique incidence, the bandwidth increases as the incident angle varies from 0°to 80°. Moreover, the co-polarization reflection is independent of the incident azimuth angles.

Wideband linear-to-circular polarization conversion realized by a transmissive anisotropic metasurface

We propose a metasurface which consists of three conductive layers separated by two dielectric layers. Each conductive layer consists of a square array of square loop apertures, however, a pair of corners of each square metal patch surrounded by the square loop apertures have been truncated, so it becomes an orthotropic structure with a pair of mutually perpendicular symmetric axes u and v. The simulated results show that the metasurface can be used as a wideband transmission-type polarization converter to realize linear-to-circular polarization conversion in the frequency range from12.21 GHz to 18.39 GHz, which is corresponding to a 40.4% fractional bandwidth. Moreover, its transmission coefficients at x-and y-polarized incidences are completely equal. We have analyzed the cause of the polarization conversion, and derived several formulas which can be used to calculate the magnitudes of cross-and co-polarization transmission coefficients at y-polarized incidence, together with the phase difference between them, based on the two independent transmission coefficients at u-and v-polarized incidences. Finally, one experiment was carried out, and the experiment and simulated results are in good agreement with each other.

Circular Polarization Hologram Realized by Pancharatnam-Berry Phase in Microwave Frequency

Metasurfaces have shown great potential in controlling the propagation of electromagnetic waves, making them suitable for holographic beam-shaping elements. Using the principle of array synthesis, holograms have been realized in microwave frequency to manipulate electromagnetic waves to generate specific field patterns. However, current research is almost based on linear polarization and has little analysis on the circular polarization microwave hologram. Herein, we propose a circular polarization hologram realized by sub-wavelength units with self-adaptively phase profiles of electromagnetic waves. The full, continuous control of the phase is achieved by using a single structure unit based on the Pancharatnam-Berry phase. The inhomogeneity of wave-front is considered through amplitude and phase compensation which are essential to improve the quality of microwave hologram. The model achieves circular polarization hologram in microwave frequency and the clear field pattern is generated. The circular polarization hologram enriched the research field of microwave imaging, thus providing more inspirations for the development of various related techniques.

Ultra-wideband circular-polarization converter with micro-split Jerusalem-cross metasurfaces

An ultrathin micro-split Jerusalem-cross metasurface is proposed in this paper, which can efficiently convert the linear polarization of electromagnetic （EM） wave into the circular polarization in ultra-wideband. By symmetrically employing two micro-splits on the horizontal arm （in the x direction） of the Jerusalem-cross structure, the bandwidth of the proposed device is significantly extended. Both simulated and experimental results show that the proposed metasurface is able to convert linearly polarized waves into circularly polarized waves in a frequency range from 12.4 GHz to 21 GHz, with an axis ratio better than 1 dB. The simulated results also show that such a broadband and high-performance are maintained over a wide range of incident angle. The presented polarization converter can be used in a number of areas, such as spectroscopy and wireless communications.

Imprints of molecular orbitals using photoelectron angular distribution by strong laser pulses of circular polarization

We theoretically investigate the strong-field ionization of H＋2 molecules in four different electronic states by calculating photoelectron angular distributions in circularly polarized fields. We find that the structure of photoelectron angular distribution depends on the molecular orbital as well as the energy of the photoelectron. The location of main lobes changes with the symmetric property of the molecular orbital. Generally, for molecules with bonding electronic states, the photoelectron’s angular distribution shows a rotation of π/2 with respect to the molecular axis, while for molecules with antibonding electronic states, no rotation occurs. We use an interference scenario to interpret these phenomena. We also find that, due to the interference effect, a new pair of jets appears in the waist of the main lobes, and the main lobes or jets of the photoelectron’s angular distribution are split into two parts if the photoelectron energy is sufficiently high.

Ultra-wideband linear-to-circular polarization conversion metasurface

An ultra-wideband and high-efficiency reflective linear-to-circular polarization conversion metasurface is proposed. The proposed metasurface is composed of a square array of a corner-truncated square patch printed on grounded dielectric substrate and covered with a dielectric layer, which is an orthotropic anisotropic structure with a pair of mutually perpendicular symmetric axes u and v along the directions with the tilt angles of ±45° with respect to the vertical y axis. When the u- and v-polarized waves are incident on the proposed metasurface, the phase difference between the two reflection coefficients is close to –90° in an ultra-wide frequency band, so it can realize high-efficiency and ultra-wideband LTC polarization conversion under both x- and y-polarized incidences in this band. The proposed polarization conversion metasurface is simulated and measured. Both the simulated and measured results show that the axial ratio (AR) of the reflected wave is kept below 3 dB in the ultra-wide frequency band of 5.87 GHz–21.13 GHz, which is corresponding to a relative bandwidth of 113%;moreover, the polarization conversion rate (PCR) can be kept larger than 99% in a frequency range of 8.08 GHz–20.92 GHz.

Asymmetric Patch Element Reflectarray with Dual Linear and Dual Circular Polarization

A reflectarray antenna consisting of asymmetrical patch elements is proposed,which is capable of producing dual linear and dual circular polarized operation at 26GHz frequency.The main purpose of this design is to support four different polarizations using the same patch element.The proposed reflectarray has a single layer configuration with a linearly polarized feed and circular ring slots in the ground plane.Asymmetric patch element is designed from a square patch element by tilting its one vertical side to some optimized inclination.A wide reflection phase range of 600°is obtained with the asymmetric patch element during unit cell measurements.A 332 element circular aperture reflectarray is designed with the proposed configuration and experimentally validated with a linearly polarized prime feed configuration.Two different orientations of mirror and non-mirror asymmetric patch elements on the surface of reflectarray are analyzed.Dual linear polarization is obtained with the mirror orientation of the asymmetric patch elements on the surface of reflectarray.Alternatively,asymmetric patch elements without mirror orientation are demonstrated to produce dual circular polarization with the same linearly polarized feed.A maximum measured gain of 24.4 dB and 26.1 dB is achieved for dual linear and dual circular polarization,respectively.Their respective measured efficiencies are 28%and 41.3%,which are supported by amaximum−3 dB gain bandwidth of 13.8%and 11.5%.The circular polarization operation of the reflectarray is also supported by a 6 dB axial ratio bandwidth of 9.2%.The proposed asymmetric patch reflectarray antenna with polarization diversity,wide bandwidth and high gain is suitable to be used in many high frequency applications of 5G communication.

Testing Bell’s Theorem with Circular Polarization

Bell tests with entangled light have been performed many times in many ways using linear polarizers, but the same tests have never been done with a circular polarizer. Until recently there has never been a true circular polarization beamsplitter—an optical component that separates light directly into left and right handed polarizations. Using a true circular polarization beamsplitter based on birefringent gratings, entangled light has been analyzed with unexpected results.

Hot-exciton effects on exciton diffusion and circular polarization dynamics in a single PbI_(2)nanoflake

As one of the emerging two-dimensional lead halide materials,lead iodide(PbI_(2))nanosheets have proven to possess strong application potential in the fields of high-energy radiation detection and highly efficient perovskite solar cells.However,the underlying photophysical properties such as hot-exciton-related carrier dynamics remain unclear for PbI_(2)nanosheets.Here,we report the exciton dynamics of a single PbI_(2)nanoflake prepared by an aqueous solution method.Through a three-dimensional(3D)diffusion model,we obtain the exciton annihilation radius and diffusion coefficient of a single PbI_(2)nanoflake under nonresonant and resonant excitation conditions of band-edge exciton state.As initial exciton densities increase,we find the carrier recombination mechanism for a single PbI_(2)nanoflake gradually changes from exciton-exciton annihilation to free-carrier recombination.Finally,we reveal the room-temperature circular polarization of a single PbI_(2)nanoflake is due to free-carrier recombination with a band-edge exciton dissociation time of~120 fs under the resonant excitation condition.

Joint estimation of DOA, frequency, and polarization based on cumulants and UCA

A joint estimation algorithm of direction of arrival （DOA）, frequency, and polarization, based on fourth-order cumulants and uniform circular array （UCA） of trimmed vector sensors is presented for narrowband non-Gaussian signals. The proposed approach, which is suitable for applications in arbitrary Gaussian noise environments, gives a closed-form representation of the estimated parameters, without spectral peak searching. An efficient method is also provided for elimination of cyclic phase ambiguities. Simulations are presented to show the performance of the algorithm.

Selection of right-circular-polarized harmonics from p orbital of neon atom by two-color bicircular laser fields

The polarization properties of high-order harmonic generation(HHG) in the two-color circularly polarized laser fields are investigated by numerically solving the two-dimensional time-dependent Schr?dinger equation. By adding a wavelength of 1600-nm right-circular-polarized field to an 800-nm left-circular-polarized field, HHG is simulated from a real model of neon atom with p orbital, but not from a hydrogen-like atom model with s orbital. The orders of 3n + 1 can be selected while the orders of 3n + 2 are suppressed by adjusting the intensities of the two pulses. The physical mechanism is analyzed by time-frequency analysis and semiclassical model.

An AMC-Based Circularly Polarized Antenna for 5G sub-6 GHz Communications

This paper presents an AMC(artificial magnetic conductor)-based wideband circularly polarized printed monopole antenna for unidirectional radiation.The antenna includes an AMC reflector,a coplanar waveguide(CPW)feed structure to excite the antenna,a ground plane with a rectangular slot on the left side of feedline,and an asymmetrical ground plane on its right side.The induced surface currents on CWP feedline,rectangularly slotted,and asymmetrical ground planes cause circularly polarized radiations.The AMC reflector consisting periodic metallic square patches is used instead of the conventional PEC(perfect electric conductor)reflector,the distance between the antenna and reflector is reduced from 0.25λ0 to 0.18λ0 with performance improvement.By incorporating AMC layer with the monopole antenna,the gain of antenna is increased from 3.3 dBic to 8.7 dBic while the axial ratio bandwidth(ARBW)of antenna is increased from 27.27%to 51.67%.The simulated and measured results show that the proposed antenna has an overlapping 10-dB|S_(11)|and 3-dB ARBW of 51.67%(3.0–5.09 GHz).The overall dimensions of monopole antenna backed by AMC reflector is 1.20_(λ0)×1.20_(λ0)×0.21_(λ0) and covers 5G sub-6 GHz new radio bands(n77/n78/n79)for wireless communication systems.

Generation of two-color polarization-adjustable radiation pulses for storage ring light source

To date, two-color pulses are widely used in pump–probe experiments. For a ring-based light source, the power of the spontaneous radiation fluctuates randomly in the longitudinal direction. It is difficult to produce twocolor double pulses by optical methods. In this paper, we introduce a method based on the echo-enabled harmonic generation scheme that generates two-color pulses in a storage ring light source. By adopting crossed undulators and a phase shifter, the polarization of the two-color pulses can be easily switched. A numerical simulation based on a diffraction-limited storage ring, the Hefei Advanced Light Source, suggests that the time delay and spectral separation of the two pulses can be adjusted linearly by changing the pulse duration and chirp parameters of the seed laser. A circular polarization degree above 80% could be achieved.

Single-Layer Wideband Circularly Polarized Antenna Using Non-Uniform Metasurface for C-band Applications

A single-layer design of non-uniform metasurface(MS)based circularly polarized(CP)antenna with wideband operation characteristic is proposed and investigated in this paper.The antenna is excited by a truncated corner squared patch as a primary radiating CP source.Then,a non-uniform MS is placed in the same layer with the driven patch.Besides increasing the impedance bandwidth,the non-uniform MS also generates two additional CP bands in the high frequency band,leading to significantly increase the antenna’s overall performances.The use of non-uniform MS distinguishes our design from the other CP MS based antennas in literature,in which the MS is formed by multiple uniform unit cells and placed in different layer with the radiating element.For validation,an antenna prototype,whose overall dimensions of 0.94λ_(o)×0.94λ_(o)×0.06λ_(o) at the center operating frequency,is fabricated and experimentally tested.The measured operating bandwidth with|S11|≤−10 dB and AR≤3 dB is 27.1%(5.1–6.7 GHz)and the broadside gain within this band is from 5.7 to 7.2 dBic.Compared to the other related works,the proposed antenna has advantage of very wideband operation with single-layer design.

X-BAND CIRCULARLY POLARIZED RECTENNAS FOR MICROWAVE POWER TRANSMISSION APPLICATIONS

Circularly polarized rectennas operating at X-band are studied in this paper. The quasi-square patches fed by aperture coupling are used as the circularly polarized receiving antennas, which are easily matched and integrated with the circuits of rectennas. The double-layer structure not only minimizes the size of the rectennas but also decreases the effects of the circuits on the an- tenna. The receiving elements have broader bandwidth and higher gain than the single-layer patches. Two rectennas operating at 10GHz are designed, fabricated and measured. The voltage of 3.86V on a load of 200? is measured and a high RF-DC conversion efficiency of 75% is obtained at 9.98GHz. It is convenient for this kind of rectennas to form large arrays for high power applications.

Ultra-thin single-layer transparent geometrical phase gradient metasurface and its application to high-gain circularly-polarized lens antenna

A new method to design an ultra-thin high-gain circularly-polarized antenna system with high efficiency is proposed based on the geometrical phase gradient metasurface（GPGM）.With an accuracy control of the transmission phase and also the high transmission amplitude,the GPGM is capable of manipulating an electromagnetic wave arbitrarily.A focusing transmission lens working at Ku band is well optimized with the F /D of 0.32.A good focusing effect is demonstrated clearly by theoretical calculation and electromagnetic simulation.For further application,an ultra-thin single-layer transmissive lens antenna based on the proposed focusing metasurface operating at 13 GHz is implemented and launched by an original patch antenna from the perspective of high integration,simple structure,and low cost.Numerical and experimental results coincide well,indicating the advantages of the antenna system,such as a high gain of 17.6 d B,the axis ratio better than 2 d B,a high aperture efficiency of 41%,and also a simple fabrication process based on the convenient print circuit board technology.The good performance of the proposed antenna indicates promising applications in portable communication systems.

A Wideband Circularly Polarized Patch Antenna for 60 GHz Wireless Communications

This paper presents the design of a fully packaged 60 GHz wideband patch antenna incorporating an air cavity and a fused silica superstrate. Circular polarization (CP) is realized by introducing a diagonal slot at the center of the square patch. By optimizing the patch and the slot dimensions, a high efficiency (>90%) microstrip fed CP antenna with an impedance bandwidth of 24% and a 6 dB axial ratio bandwidth of 21.5% is designed. A coplanar waveguide (CPW) to microstrip transition with λ/4-open-ended stubs are then designed to match the antenna to the CPW packaging interface. The experimental results of the final packaged antenna agree reasonably with the simulation results, demonstrating an impedance bandwidth of more than 26% and a 6 dB axial ratio bandwidth of 22.7%.

A Review of Wideband Circularly Polarized Dielectric Resonator Antennas

This article presents a technical review of circularly polarized(CP) dielectric resonator antennas(DRA) for wideband applications.The primary objective of this review is,to highlight the techniques used by different researchers for generating circular polarization in DRA.First,a general idea of circular polarization and it advantages over linear polarization is presented,and then all the major developments made in the CP DRA are highlighted.The emphasis of the paper is on the wideband circularly polarized dielectric resonator antenna.The current state of the art and all the realizable features of the CP DRA are addressed comprehensively.Finally,some recommendations for future CP DRAs are given and the paper ends with concluding remarks.