A TENSOR METHOD FOR THE DERIVATION OF THE EQUATIONS OF RIGID BODY DYNAMICS

A tensor method for the derivation of the equations of rigid body dynamics, based on the concepts of continuum mechanics, is presented. The formula of time derivative of the inertia tensor with zero corotational rate is used to prove the equivalences of five methods, namely, Lagrange's equations, Nielsen's equations, Gibbs-Appell's equations, Kane's equations and the generalized momentum type of Kane's equations. Some differential identities on angular velocity and angular acceleration are given.

Modified RATTLE Method for Rigid Body Dynamics in Cartesian Coordinates

In this paper,we describe a modified RATTLE(M-RATTLE)method for rigid body dynamics directly in Cartesian coordinates.The M-RATTLE method introduces a new way of resetting the coordinates to satisfy the constraints at each step,which is designed for the rigid body dynamics calculations in the Cartesian coordinates.M-RATTLE is algebraically equivalent to the RATTLE method and the cost of performing rigid body dynamics by M-RATTLE is independent of the number of constraints.The interaction forces between atoms belonging to the same rigid molecule do not need to be computed and explicit expressions of the constraints of internal degrees of freedom are unnecessary.The performance and sampling results of the proposed method are compared with those of the symplectic splitting method for an isolated rigid benz molecule and for a cluster of twenty-seven benz molecules.

Implementation of configuration dependent stiffness proportional damping for the dynamics of rigid multi-block systems

The distinct element method(DEM)has been used successfully for the dynamic analysis of rigid block sys- tems.One of many difficulties associated with DEM is modeling of damping.In this paper,new procedures are proposed for the damping modeling and its numerical implementation in distinct element analysis of rigid muhi-block systems.The stiff- ness proportional damping is constructed for the prescribed damping ratio,based on the non-zero fundamental frequency ef- fective during the time interval while the boundary conditions remain essentially constant.At this time interval,the funda- mental frequency can be estimated without complete eigenvalue analysis.The damping coefficients will vary while the damp- ing ratio remains the same throughout the entire analysis.A new numerical procedure is developed to prevent unnecessary energy loss that can occur during the separation phases.These procedures were implemented in the development of the dis- tinet element method for the dynamic analyses of piled multi-block systems.The analysis results |or the single-block and two-block systems were in a good agreement with the analytic predictions.Applications to the seismic analyses of piled four- block systems revealed that the new procedures can make a significant difference and may lead to much-improved results.

DYNAMIC MODELING AND SIMULATION OF FLEXIBLE CABLE WITH LARGE SAG

Discrete model of flexible cable with large sag is established by using multiple rigid body-spherical hinge model, and dynamic equation of that discrete model is derived according to dynamics theory of multiple rigid body system. Displacement and velocity of system are revised to eliminate violation phenomenon of the differential-algebra equation in numerical simulation based of the theory of generalized inverse of matrices. Numerical simulation proves the validity of our method.

THE INVARIANT MANIFOLD METHOD AND THE CONTROLLABILITY OF NONLINEAR CONTROL SYSTEM

The problem of controllability of nonlinear control system is a significant field which has an extensive prospect of application. A. M. Kovalev of Ukraine Academy of Science applied the oriented manifold method developed in dynamics:of rigid body to nonlinear control system for the first time,and obtained a series of efficient results. Based on Kovalev's oriented manifold method, firstly, by invariant manifold method the problem of controllability of nonlinear control system was studied and the necessary condition of the controllability of a kind of affine nonlinear system was given out. Then the realization of the necessary condition wars discussed. At last, the motion of a rigid body with two rotors,vas, investigated and the necessary condition which is satisfied by this system,vas proved.

DRIFT MOTION OF FREE-ROTOR GYROSCOPE WITH RADIAL MASS-UNBALANCE

The motion of a rigid body about fixed point with small radial mass-unbalance in homogeneous gravitational field was discussed. The dynamical equations described by state variables of the body were established, and approximate analytical solutions for a spinning body with high speed were obtained by use of the average method. The influence of the radial mass-unbalance of the rotor to the precession character of a free-rotor gyroscope was analyzed. And a physical explanation of the drift phenomenon of the gyro was given. An applicable formula of gyro's constant drift in analytical form was obtained, which is perfectly coincident with the numerical calculation.

DESIGN AND IMPLEMENTATION OF REAL-TIME PHYSICS SIMULATION ENGINE FOR e-ENTERTAINMENT

We present our recent research results regarding the designing and implementation of real-time physics simulation engines,which aim at developing physics-inspired e-entertainment such as computer games,mobile applications,interactive TV and other smart media in Korea.Our real-time physics engine consists of three functional components:rigid body dynamics simulation,deformable body simulation,and data-driven physics simulation.The core simulation techniques to realize these simulation components include real-time collision detection and response,large-scale model simulation,and character model control.In this paper,we highlight these features and demonstrate their performances.We also showcase some of the gaming applications that we have integrated our physics engine into.

Micromechanical investigation of granular ratcheting using a discrete model of polygonal particles

We use a two-dimensional model of polygonal particles to investigate granular ratcheting. Ratcheting is a long-term response of granular materials under cyclic loading, where the same amount of permanent deformation is accumulated after each cycle. We report on ratcheting for low frequencies and extremely small loading amplitudes. The evolution of the sub-network of sliding contacts allows us to understand the micromechanics of ratcheting. We show that the contact network evolves almost periodically under cyclic loading as the sub-network of the sliding contacts reaches different stages of anisotropy in each cycle. Sliding contacts lead to a monotonic accumulation of permanent deformation per cycle in each particle. The distribution of these deformations appears to be correlated in form of vortices inside the granular assembly.