Based on the engineering background of the Jiangxinzhou Bridge in Nanjing, issues related to the spatial main saddle of the self-anchored suspension bridge are studied. The refinement finite element model is establish...Based on the engineering background of the Jiangxinzhou Bridge in Nanjing, issues related to the spatial main saddle of the self-anchored suspension bridge are studied. The refinement finite element model is established by the secondary development technology based on the platform of the general finite element program, and a reasonable load pattern is used in its spatial structural analysis, by which its path of force transference and stress distribution are obtained. Matched with the spatial main cable, the tangency point correction method is also discussed. The results show that the lateral wall stress of the saddle groove is higher than the stress within the wall due to the role of lateral forces in the finished bridge state; the horizontal volume force of the main cable can generate a gradient distributed vertical extrusion pressure on the saddle clamping device and the main saddle body; the geometric nonlinear effect of the self- anchored suspension bridge cable system in the construction process is significant, which can be reflected in the spatial tangent point position of the main cable with the main saddle changes a lot from free cable to finished cable.展开更多
In order to figure out the cable flexural rigidity influence on suspension bridges,a contrast model experiment is made:a chain cable model with no flexural rigidity and a wire cable model with some flexural rigidity.A...In order to figure out the cable flexural rigidity influence on suspension bridges,a contrast model experiment is made:a chain cable model with no flexural rigidity and a wire cable model with some flexural rigidity.And then,four finite element models of a same long-span suspension bridge with different cable element are set up to be analyzed.Both experimental and numerical simulation results show that,with the increase of the span and the decrease of sag-span ratio,the influence of the cable flexural rigidity is significant.The difference of nodes displacement reaches more than 10 cm in construction analysis,which will bring some trouble to the construction.And the difference of the maximum section edge normal stress may reach 15%,which may have an adverse impact onto the bridge.Therefore,considering the cable flexural rigidity is necessary on some analysis of suspension bridges.展开更多
Based on the spatial model,a reliable and accurate calculation method on the shape finding of self anchored suspension bridge with spatial cables was studiedin this paper.On the principle that the shape of the main ca...Based on the spatial model,a reliable and accurate calculation method on the shape finding of self anchored suspension bridge with spatial cables was studiedin this paper.On the principle that the shape of the main cables between hangers is catenary,the iteration method of calculating the shapes of the spatial main cables under the load of hanger forces was deduced.The reasonable position of the saddle was determined according to the shape and the theoretical joint point of the main cables.The shapes of the main cables at completed cable stage werecalculated based on the unchanging principle of the zero-stress lengths of the main cables.By using a numerical method combining with the finite element method,one self-anchored suspension bridge with spatial cables was analyzed.The zero-stress length of the main cables,the position of the saddle,and the pre-offsetting of the saddle of the self-anchored suspension bridge were given.The reasonable shapes of the main cables at bridge completion stage and completed cable stage were presented.The results show that the shape-finding calculation method is effective and reliable.展开更多
基金The National High Technology Research and Development Program of China(863 Program)(No.2006AA04Z416)the National Science Fund for Distinguished Young Scholars(No.50725828)
文摘Based on the engineering background of the Jiangxinzhou Bridge in Nanjing, issues related to the spatial main saddle of the self-anchored suspension bridge are studied. The refinement finite element model is established by the secondary development technology based on the platform of the general finite element program, and a reasonable load pattern is used in its spatial structural analysis, by which its path of force transference and stress distribution are obtained. Matched with the spatial main cable, the tangency point correction method is also discussed. The results show that the lateral wall stress of the saddle groove is higher than the stress within the wall due to the role of lateral forces in the finished bridge state; the horizontal volume force of the main cable can generate a gradient distributed vertical extrusion pressure on the saddle clamping device and the main saddle body; the geometric nonlinear effect of the self- anchored suspension bridge cable system in the construction process is significant, which can be reflected in the spatial tangent point position of the main cable with the main saddle changes a lot from free cable to finished cable.
基金Sponsored by Major Research Plan of the National Natural Science Foundation of China (Grant No.90715021)
文摘In order to figure out the cable flexural rigidity influence on suspension bridges,a contrast model experiment is made:a chain cable model with no flexural rigidity and a wire cable model with some flexural rigidity.And then,four finite element models of a same long-span suspension bridge with different cable element are set up to be analyzed.Both experimental and numerical simulation results show that,with the increase of the span and the decrease of sag-span ratio,the influence of the cable flexural rigidity is significant.The difference of nodes displacement reaches more than 10 cm in construction analysis,which will bring some trouble to the construction.And the difference of the maximum section edge normal stress may reach 15%,which may have an adverse impact onto the bridge.Therefore,considering the cable flexural rigidity is necessary on some analysis of suspension bridges.
基金The authors would like to gratefully acknowledge the supports from the National Natural Science Foundation of China(Grant No.50738002)and from the School of Civil Engineering and Architecture of Changsha University of Science and Technology and the Wind Engineering Research Center of Hunan University in China.
文摘Based on the spatial model,a reliable and accurate calculation method on the shape finding of self anchored suspension bridge with spatial cables was studiedin this paper.On the principle that the shape of the main cables between hangers is catenary,the iteration method of calculating the shapes of the spatial main cables under the load of hanger forces was deduced.The reasonable position of the saddle was determined according to the shape and the theoretical joint point of the main cables.The shapes of the main cables at completed cable stage werecalculated based on the unchanging principle of the zero-stress lengths of the main cables.By using a numerical method combining with the finite element method,one self-anchored suspension bridge with spatial cables was analyzed.The zero-stress length of the main cables,the position of the saddle,and the pre-offsetting of the saddle of the self-anchored suspension bridge were given.The reasonable shapes of the main cables at bridge completion stage and completed cable stage were presented.The results show that the shape-finding calculation method is effective and reliable.
