The squeeze flow of a rigid-plastic medium between parallel disks is considered for small gaps with partial wall slip. The stress distribution and the squeeze force between parallel disks of a rigid-plastic medium wit...The squeeze flow of a rigid-plastic medium between parallel disks is considered for small gaps with partial wall slip. The stress distribution and the squeeze force between parallel disks of a rigid-plastic medium with the following four diferent slip boundary conditions are obtained. (1) The Coulombic friction condition is applied, and the stress distribution on the wall is derived, which is linear or exponential distribution in the no-slip area or slip area. (2) It is assumed that the slip velocity at the disks increases linearly with the radius up to the rim slip velocity, with the stress distribution and the squeeze force gained. (3) The assumption that the slip velocity at the disks is related to the shear stress component is used, with the stress distribution and the squeeze force obtained, which is equivalent to the result given in (2). (4) Rational velocity components are introduced, and the stress distribution is satisfed.展开更多
Some techniques such as die surface description, contact judgement algorithm and remeshing are proposed to improve the robustness of the numerical solution. Based on these techniques, a three-dimensional rigid-plastic...Some techniques such as die surface description, contact judgement algorithm and remeshing are proposed to improve the robustness of the numerical solution. Based on these techniques, a three-dimensional rigid-plastic FEM code has been developed. Isothermal forging process of a cylindrical housing has been simulated. The simulation results show that the given techniques and the FEM code are reasonable and feasible for three-dimensional bulk forming processes.展开更多
Under the hypothesis of the rigid-plastic material, specific efforts are placed on the developments of the key simulation techniques of the meshless Galerkin method because of the complexity of the deformation process...Under the hypothesis of the rigid-plastic material, specific efforts are placed on the developments of the key simulation techniques of the meshless Galerkin method because of the complexity of the deformation process as well as the generality and atomization of the simulation procedures for non-steady state large deformation plastic processes, therefore, an adaptive rigid meshless Galerkin method is developed. The influence domain control method is used in the least square approximation by dynamic evaluation of the magnitude of the influence domain and the effective control of the amount and the positions of the points in the least square approximation in order to improve approximation precision. The amount of the Gauss integration points in the discrete domain is maintained in a considerable magnitude in order to ensure the integration precision in the discrete domain. The length of the frictional boundary of the plastic deformation process may be getting longer when its deforma- tion is getting severe. Thus, the densities of the boundary points of some places get lower. The adaptive boundary points setting method is employed to improve the approximation precision of the boundary points and enhance the constraint of the boundary condition by adaptive control of boundary point density. Some typical extrusion processes are analyzed, detail simulation results such as the deformation field, velocity field, effective strain field, effective strain rate field, the volume loss curve and load-stroke curve are obtained. The effectiveness of the method developed is demonstrated and the precision of the meshless simulation is proved by overall comparison with the results obtained by using the commercial software deform.展开更多
The rigid-plastic analysis of mental forming simulation is formulated as a discrete nonlinear mathematical programming problem with equality and inequality constraints by means of the finite element technique. An iter...The rigid-plastic analysis of mental forming simulation is formulated as a discrete nonlinear mathematical programming problem with equality and inequality constraints by means of the finite element technique. An iteration algorithm is used to solve this formulation, which distinguishes the integration points of the rigid zones and the plastic zones and solves a series of the quadratic programming to overcome the difficulties caused by the nonsmoothness and the nonlinearity of the objective function. This method has been used to carry out the rigid-plastic FEM analysis. An example is given to demonstrate the effectiveness of this method.展开更多
A new method of three-dimensional remeshing is proposed for rigid-plastic finiteelement analysis of a complicated forging process.The forging process of a cylindricalhousing has been simulated to show the effectivenes...A new method of three-dimensional remeshing is proposed for rigid-plastic finiteelement analysis of a complicated forging process.The forging process of a cylindricalhousing has been simulated to show the effectiveness of the scheme.The result ofsimulation shows that the computation can be effectively carried out by using the des-cribed remeshing scheme.展开更多
A new rigid-plastic/rigid-viscoplastic (RP/RVP) FEM based on linearprogramming (LP) for plane-strain metal forming simulation is proposed. Compared with thetraditional RP/RVP FEM based on iteration solution, it has so...A new rigid-plastic/rigid-viscoplastic (RP/RVP) FEM based on linearprogramming (LP) for plane-strain metal forming simulation is proposed. Compared with thetraditional RP/RVP FEM based on iteration solution, it has some remarkable advantages, such a it'sfree of convergence problem and its convenience in contact, incompressibility constraint and rigidzone treatment. Two solution examples are provided to validate its accuracy and efficiency.展开更多
A study is presented for the large deflection dynamic response of rigid- plastic circular plate resting on potential fluid under a rectangular pressure pulse load. By virtue of Hankel integral transform technique,this...A study is presented for the large deflection dynamic response of rigid- plastic circular plate resting on potential fluid under a rectangular pressure pulse load. By virtue of Hankel integral transform technique,this interaction problem is reduced to a problem of dynamic plastic response of the plate in vacuum.The closed-form solutions are derived for both middle and high pressure loads by solving the equations of motion with the large deflection in the range where both bending moments and membrane forces are important.Some numerical results are given.展开更多
Bridge piers are impacted by autos sometimes. The pier usually has not been destroyed after once impact by auto. But there are few research on damage which will affect pier's capability, and most relative studies ...Bridge piers are impacted by autos sometimes. The pier usually has not been destroyed after once impact by auto. But there are few research on damage which will affect pier's capability, and most relative studies have focused the problems on piers impacted by vessels. The methods involve mainly sutra experience theory, numerical analysis, and experimental method. Owing to the complicacy of the bridge pier impacted by a vessel, there are few research derived with the sutra mechanics model and the piers impacted by autos. The dynamic response is studied here under the assumption of the rigid-plastic small-deformation for the pier impacted by auto. According to the Parkes beam model, the rigid-plastic theoretical solution is deduced. The final deformation is calculated by a practical example for the pier impacted by auto.展开更多
Compared with the traditional rigid plastic/rigid viscoplastic(RP/RVP) FEM(based on iteration solution),RP/RVP FEM based on linear programming (LP) has some remarkable advantages,such as it's free of convergence...Compared with the traditional rigid plastic/rigid viscoplastic(RP/RVP) FEM(based on iteration solution),RP/RVP FEM based on linear programming (LP) has some remarkable advantages,such as it's free of convergence problem and its convenience in contact,rigid zone,and friction force treatment.The numerical model of RP/RVP FEM based on LP for axisymmetrical metal forming simulation is studied,and some related key factors and its treatment methods in formulation of constraint condition are proposed.Some solution examples are provided to validate its accuracy and efficiency.展开更多
基金Project supported by the National Natural Science Foundation of China(No.10372113).
文摘The squeeze flow of a rigid-plastic medium between parallel disks is considered for small gaps with partial wall slip. The stress distribution and the squeeze force between parallel disks of a rigid-plastic medium with the following four diferent slip boundary conditions are obtained. (1) The Coulombic friction condition is applied, and the stress distribution on the wall is derived, which is linear or exponential distribution in the no-slip area or slip area. (2) It is assumed that the slip velocity at the disks increases linearly with the radius up to the rim slip velocity, with the stress distribution and the squeeze force gained. (3) The assumption that the slip velocity at the disks is related to the shear stress component is used, with the stress distribution and the squeeze force obtained, which is equivalent to the result given in (2). (4) Rational velocity components are introduced, and the stress distribution is satisfed.
基金This work was supported by the Brain Korea 2lProject and the Grallt of Post-Doc Program, KyungpookNational University (1999).
文摘Some techniques such as die surface description, contact judgement algorithm and remeshing are proposed to improve the robustness of the numerical solution. Based on these techniques, a three-dimensional rigid-plastic FEM code has been developed. Isothermal forging process of a cylindrical housing has been simulated. The simulation results show that the given techniques and the FEM code are reasonable and feasible for three-dimensional bulk forming processes.
基金This project is supported by National Natural Science Foundation for Dis-tiguished Young Scholars of China (No. 50425517).
文摘Under the hypothesis of the rigid-plastic material, specific efforts are placed on the developments of the key simulation techniques of the meshless Galerkin method because of the complexity of the deformation process as well as the generality and atomization of the simulation procedures for non-steady state large deformation plastic processes, therefore, an adaptive rigid meshless Galerkin method is developed. The influence domain control method is used in the least square approximation by dynamic evaluation of the magnitude of the influence domain and the effective control of the amount and the positions of the points in the least square approximation in order to improve approximation precision. The amount of the Gauss integration points in the discrete domain is maintained in a considerable magnitude in order to ensure the integration precision in the discrete domain. The length of the frictional boundary of the plastic deformation process may be getting longer when its deforma- tion is getting severe. Thus, the densities of the boundary points of some places get lower. The adaptive boundary points setting method is employed to improve the approximation precision of the boundary points and enhance the constraint of the boundary condition by adaptive control of boundary point density. Some typical extrusion processes are analyzed, detail simulation results such as the deformation field, velocity field, effective strain field, effective strain rate field, the volume loss curve and load-stroke curve are obtained. The effectiveness of the method developed is demonstrated and the precision of the meshless simulation is proved by overall comparison with the results obtained by using the commercial software deform.
文摘The rigid-plastic analysis of mental forming simulation is formulated as a discrete nonlinear mathematical programming problem with equality and inequality constraints by means of the finite element technique. An iteration algorithm is used to solve this formulation, which distinguishes the integration points of the rigid zones and the plastic zones and solves a series of the quadratic programming to overcome the difficulties caused by the nonsmoothness and the nonlinearity of the objective function. This method has been used to carry out the rigid-plastic FEM analysis. An example is given to demonstrate the effectiveness of this method.
文摘A new method of three-dimensional remeshing is proposed for rigid-plastic finiteelement analysis of a complicated forging process.The forging process of a cylindricalhousing has been simulated to show the effectiveness of the scheme.The result ofsimulation shows that the computation can be effectively carried out by using the des-cribed remeshing scheme.
文摘A new rigid-plastic/rigid-viscoplastic (RP/RVP) FEM based on linearprogramming (LP) for plane-strain metal forming simulation is proposed. Compared with thetraditional RP/RVP FEM based on iteration solution, it has some remarkable advantages, such a it'sfree of convergence problem and its convenience in contact, incompressibility constraint and rigidzone treatment. Two solution examples are provided to validate its accuracy and efficiency.
基金The study is supported by National Natural Science Foundation of China.
文摘A study is presented for the large deflection dynamic response of rigid- plastic circular plate resting on potential fluid under a rectangular pressure pulse load. By virtue of Hankel integral transform technique,this interaction problem is reduced to a problem of dynamic plastic response of the plate in vacuum.The closed-form solutions are derived for both middle and high pressure loads by solving the equations of motion with the large deflection in the range where both bending moments and membrane forces are important.Some numerical results are given.
文摘Bridge piers are impacted by autos sometimes. The pier usually has not been destroyed after once impact by auto. But there are few research on damage which will affect pier's capability, and most relative studies have focused the problems on piers impacted by vessels. The methods involve mainly sutra experience theory, numerical analysis, and experimental method. Owing to the complicacy of the bridge pier impacted by a vessel, there are few research derived with the sutra mechanics model and the piers impacted by autos. The dynamic response is studied here under the assumption of the rigid-plastic small-deformation for the pier impacted by auto. According to the Parkes beam model, the rigid-plastic theoretical solution is deduced. The final deformation is calculated by a practical example for the pier impacted by auto.
文摘Compared with the traditional rigid plastic/rigid viscoplastic(RP/RVP) FEM(based on iteration solution),RP/RVP FEM based on linear programming (LP) has some remarkable advantages,such as it's free of convergence problem and its convenience in contact,rigid zone,and friction force treatment.The numerical model of RP/RVP FEM based on LP for axisymmetrical metal forming simulation is studied,and some related key factors and its treatment methods in formulation of constraint condition are proposed.Some solution examples are provided to validate its accuracy and efficiency.
