Consolidation analysis of composite foundation with partially penetrated cement fly-ash gravel(CFG) piles under changing permeable boundary conditions

Based on the double-layered foundation theory, the composite ground with partially penetrated cement fly-ash gravel(CFG) piles was regarded as a double-layered foundation including the surface reinforced area and the underlying untreated stratum. Due to the changing permeability property of CFG piles, the whole consolidation process of the composite ground with CFG piles was divided into two stages, i.e., the early stage(permeable CFG pile bodies) and the later stage(impermeable pile bodies). Then, the consolidation equation of the composite foundation with CFG piles was established by using the Terzaghi one-dimensional consolidation theory. Consequently, the unified formula to calculate the excess pore water pressure was derived with the specific solutions for the consolidation degree of composite ground, reinforced area and underlying stratum under instant load obtained respectively. Finally, combined with a numerical example, influencing rules by main factors(including the replacement rate m, the treatment depth h1, the permeability coefficient Ks1, Kv2 and compression modulus Es1, Es2 of reinforced area and underlying stratum) on the consolidation property of composite ground with CFG piles were discussed in detail. The result shows that the consolidation velocity of underlying stratum is slower than that of the reinforced area. However, the consolidation velocity of underlying stratum is slow at first then fast as a result of the transferring of effective stress to the underlying stratum during the dissipating process of excess pore water pressure.

Deformation and failure modes of composite foundation with sub-embankment plain concrete piles

With the development of high-speed railway in China, composite foundation with rigid piles has become a stamdard solution of meeting the high requirements of stability and post-construction settlement of embankment on soft subgrade. Among several im- provement pattems, plain concrete piles have been extensively used to treat soft ground supported embankment. To investigate the deformation and failure modes of unimproved soft ground and soft ground reinforced by sub-embankment plain concrete piles, and to learn the influences of track and vehicle load, the effect of pile spacing, as well as the compression moduli of soil layers and upper load condition on the failure modes, a series of centrifuge model tests were performed. Test results indicate that the dis- placement of unimproved soft ground under the embankment increases continuously as embankment, track and train loading, and slip circle failure takes place. The deformation law of soft ground reinforced by sub-embankment plain concrete piles depends on pile spacing, compression modulus of the soft ground, and loading conditions. It was also found that plain concrete piles show displacement and failure patterns depending on its location, compression modulus of soft soil around the pile, and loading condi- tions. Furthermore, the evaluation of improved ground stability as well as the model test procedure is also presented.

Experimental Study of Dynamic Characteristics on Composite Foundation with CFG Long Pile and Rammed Cement-Soil Short Pile

Based on the idea of optimization design of pile type, the two kinds of the typical pile type are selected, which containing flexibility pile (e.g. rammed cement-soil pile is for short RCSP), and rigid pile (e.g. cement-flyash-gravel pile is for short CFGP). The three kinds of the composite foundation are designed, which are CFGP, CFG long pile and CFG short pile (for short CFGLP-CFGSP), CFG long-short pile and rammed cement-soil short pile (for short CFGLP-RCSSP). Natural earthquake is simulated by using the engineering blasting;the dynamic characteristics and dynamic response of the composite foundation are studied through field test. CFGLP-RCSSP is closed to linear relation. The bearing capacity of the four composite foundation of the CFGP, CFGLP-CFGSP, and CFGLP-RCSSP in the site are 225 kPa, 179 kPa, and 197 kPa, separately increases 150%, 98.8% and 119% compared to the natural foundation. The vibration main frequency is mainly depended on properties of foundation soil and piles between vibration source and measuring point, pilling load value. Horizontal vibration main frequency greater than the vertical vibration main frequency and the vertical vibration main frequency close to the first-order natural frequency of composite foundation. With the pilling load increasing, the CFGLP-RCSSP pile composite foundation combined frequency decreased. Under the same blast energy, the acceleration peak on the CFG pile composite foundation is less than CFGLP-CFGSP the corresponding values, as the load increases, the peak acceleration gently. CFG pile composite foundation is favorable on seismic. The distribution of peak acceleration is consistent within 4 m from pile top in the CFGLP_RCSSP composite foundation. The maximum of the horizontal acceleration peak along the pile body occurs at a distance of pile top 4 m or the pile top, and that of vertical acceleration peak occurred at a pile top.

The Dynamic Characteristic Experimental Method on the Composite Foundation with Rigid-Flexible Compound Piles

Based on the idea of optimization design of pile type, the composite foundations, which include cememt-flyash-gaavel (for short CFG) long piles and cement-soil (for short CS) short piles, and CS piles with CFG core as well, are formed. The method of the site dynamic characteristic tests of the composite foundations is discussed. The test results show that fireworks bomb may replace demolitions as the vibration resource. Vibration time is about 0.1 sec. Horizontal vibration major frequency is at 22.476 - 56.436 Hz, and vertical vibration major frequency is at 15.538 - 55.884 Hz. The pile arrangements of the composite foundation in the same site have more effect on the acceleration peak value. From the point of vibration, the anti-seismic effect of the CS piles with CFG core is better than others.

Numerical Analysis of the Settlement of Composite Foundation Reinforced with Crushed Stone Grouting Pile and Rigid Bearing Plate

This paper deals with a new type of crushed stone grouting pile with a rigid bearing plate. The load transfer characteristics were analyzed, and a settlement model of the composite foundation reinforced with crushed stone grouting pile and rigid bearing plate was built by FEM program. The effects of replacement ratio of capping plate, replacement ratio of pile, replacement ratio of grout diffusion zone, pile-soil modulus ratio, and serous-soil modulus ratio, on the composite foundation settlement were discussed. It is concluded that the proposed crushed stone grouting pile with a rigid bearing plate is effective in decreasing the settlement of composite foundation.

Calculation method of composite foundation sedimentation of grouting pile with cover plate under embankment load

Grouting pile is a new soft soil foundation treatment method with characteristics such as no vibration, no noise, no soil compaction, light construction machines and quick construction velocity and so on. At present, study on reinforcement mechanism and design calculation method of composite foundation of grouting pile is initially started without design specifications, so it is usually required to draw on design specifications of stump pile when designing composite foundation of grouting pile while grouting pile has its characteristics and difference although reinforcement mechanisms and construction processes of two types of piles are similar. Sedimentation formula of composite foundation of grouting pile with cover plate is educed and a suitable deformation mode is proposed by aiming to deformation characteristics of composite foundation of grouting pile with cover plate under embankment load on basis of relevant sedimentation theories of composite foundation by combination of characteristics of composite foundation of grouting pile. The sedimentation calculation formula of grouting pile with cover plate under embankment load is educed according to balance relation of force and displacement coordination conditions by elastic theory and sedimentation calculation model established is validated by sedimentation monitoring documents of one expressway in China.

Settlement of composite foundation with discrete material pile considering modulus change

Based on deeply discussing the deformation mechanism of composite foundation with discrete material pile, firstly, the settlement of composite foundation in rigid foundation conditions was assumed to consist of two parts, an expanding part and an un-expanding part. Then, in view of the differences of deformation properties between the expanding part and the un-expanding part, the relationships between the pile modulus and the applied load in these two parts were respectively developed. Thirdly, by introducing the above relationships into settlement analysis, a new method to calculate displacement of composite foundation with discrete material pile was proposed by using the multi-stage loading theory and the layer-wise summation approach. This method is effective not only for accounting for the effect of variations of pores on deformation modulus of the pile body in different depths, but also for describing the characteristics of different deformation mechanisms of the pile body with varying depth. Finally, the proposed method was used to a practical composite foundation problem, whose theoretical results were presented and compared to those of other methods. The rationality and feasibility of this method are identified through comparative analysis.

Bearing capacity and mechanical behavior of CFG pile composite foundation

CFG pile (i.e., pile constructed by granular materials of cement, fly-ash and gravel) composite foundation is applied in subsoil treatment widely and successfully. In order to have a further study of this kind of subsoil treatment technology, the influencing factors and calculation methods of the vertical bearing capacity of single CFG pile and the CFG pile composite foundation were discussed respectively. And based on the obtained solutions, effects by the cushion and measurements to reduce negative friction area were analyzed. Moreover, the developing law of settlement and bearing capacity eigenvalue controlled by the material strength with the increase of load were given for the CFG composite foundation. The in-situ static load test was tested for CFG pile. The results of test show that the maximum test load or half of the ultimate load is used from all the points of test, the average bearing capacity eigenvalue of single pile is 390 kN, and slightly greater than the design value of bearing capacity. The bearing capacity eigenvalues of composite foundation for 3 piles are greater than 300 kPa, and the mechanical properties of CFG pile composite foundation are almost identical in the case of the same load and cushion thickness. The pile-soil stress ratio and the load-sharing ratio can be adjusted through setting up cushion thickness.

Experiments of Multi-element Composite Foundation with Steel Pipe Pile and Gravel Pile

A set of serf-developed apparatus for foundation physical model were utilized to conduct model tests of the multi-element composite foundation with a steel pipe pile and several gravel piles. Some load-bearing characteristics of the multi-element Composite foundation, including the curves of foundation settlement, stresses of piles, pile-soil stress ratio, and load-sharing ratio of piles and soil, were obtained to study its working performances in silty sand soil. The experimental results revealed that the multi-element composite foundation with steel pipe pile and gravel pile contributed more than the gravel pile composite foundation in improving the bearing capacity of the silty fine sand.

Verification of Seismic Performance of Pile Foundation in Composite Ground through Experimental and Numerical Methods

A new construction method of pile foundation in composite ground, in which, prior to installing piles, the ground is improved around the heads of the piles in soft ground or ground subject to liquefaction, which is introduced in this paper. This construction method uses a combination of pile foundation construction together with common ground improvement methods, including deep mixing, preloading and sand compaction piling, and it is referred to as the composite ground pile method. Since an artificial ground with relatively high rigidity comparing with that of the original ground was formed around the pile in this method, and the seismic performance has not been made clear, thus the seismic performance of piles in composite ground was systematically analyzed through a series of centrifuge model tests and numerical analyses by using dynamic nonlinear finite element method, and a verification method for the seismic performance of piles in composite ground was proposed on the basis of the experimental and numerical results.

Parameter analysis of composite pile foundation in bridge foundation

In the current theory of bridge foundation design,all of the loads above the cap are loaded by the pile,and the bearing capacity of the soil among piles is not taken into account.In order to analyze the bearing capacity of the soil among piles in bridge pile foundation,a model of pile foundation is established based on a bridge foundation which is under construction,and by the finite element analysis software ANSYS.According to the results of finite element analysis(FEA)and current bridge foundation design theory,a feasible composite pile foundation which can be applied in the design of bridge foundation,is recommended.Additionally,a number of modifications are made to the original design.It was confirmed that these modifications derived from numerical simulations can improve the performance of the foundation.

Settlement Characteristics of Cement Fly-Ash GravelPile-Plate Composite Foundation of High-Speed Railway

Field tests on settlement characteristics were carried out on the cement fly-ash gravel （CFG） pile-plate composite foundation on Beijing-Xuzhou section of Beijing-Shanghai high-speed railway. The settlements of the piles and the soil between pries were measured and analyzed. The results show that the settlement-time dependency experienced three phases： rapid development phase, stable development phase and stable phase. Therefore, surcharge preloading was necessary to reduce the settlement after construction. The finite element software Plaxis was used to calculate the deformations of the pile top and the soil between piles at the embankment center, as well as the settlements of CFG pile reinforcement area and the underlying stratum under surcharge preloading. The calculation results and the field test results were compared and analyzed. Both the results show that the settlement of the composite foundation mainly occured in underlying stratum. The settlement characteristics of pile-plate composite foundation under high embankment are also concluded.

上砂下黏地层中桩-筒复合基础V-H承载特性

海上风机基础不仅受自重等竖向力V作用,也因水流、波浪和风等影响而承受水平荷载H。为探讨上砂下黏地层中一种由单桩和吸力筒组成的新型海上风机桩-筒复合基础受V-H组合作用时的承载特性,自主设计完成了一系列室内桩-筒复合基础V-H组合加载模型试验,获得不同组合参数下桩-筒复合基础的荷载-位移曲线和桩身弯矩分布曲线,并绘制出V-H承载力包络线。在此基础上,采用ABAQUS建立了上砂下黏地层中桩-筒复合基础三维数值分析模型,经模型验证与参数分析,进一步讨论了砂土厚度、筒径、筒高以及加载高度等参数对桩-筒复合基础承载特性的影响曲线,并拟合出桩-筒复合基础承载力简化计算公式,分析结果表明:桩-筒复合基础能显著提高桩身水平承载力,增幅达30%~90%,且增加筒径比增加筒高更有利于提高基础水平承载力;上部砂土层较厚时,桩-筒复合基础存在一个使复合基础水平承载力达到最大的预加竖向荷载最佳值,其值随不同载荷工况在(0.4~0.7)Vult范围内变化。

黏土中海上风力机桩-筒复合基础地震响应分析

参考NREL海上风力机结构参数,基于ABAQUS软件平台,建立黏土中海上风力机桩-筒复合基础的三维整体有限元模型;采用总应力形式的非线性运动硬化模型描述黏土的不排水动应力应变响应,通过编制Matlab程序实现随机风荷载及波浪荷载的模拟;开展地震及风、浪、流荷载共同作用下海上风力机桩-筒复合基础的时域整体动力响应分析,揭示桩-筒复合基础的承载机理,分析地震烈度、土体强度及基础尺寸对桩-筒复合基础动力响应的影响规律。

模块化建筑刚性桩复合地基共同作用试验分析

本文依据某模块化示范楼,制作了简化后的1∶10的模块化建筑刚性桩复合地基的室外缩尺模型,考虑了上部模块结构与地基基础共同作用。通过模型试验分析了上部模块刚度变化对上部模块钢柱、筏板基础和刚性桩复合地基各受力体的影响。结果表明:模块化建筑中部柱轴力>边部柱轴力>角部柱轴力;随上部模块刚度的增加,中部柱轴力逐渐减小,边部柱和角部柱轴力逐渐增大;筏板基础中部沉降最大,边部沉降最小,整体沉降随上部模块楼层的增加逐渐增大;角部桩身轴力>边部桩身轴力>中部桩身轴力,桩身轴力沿着桩深度方向先增大后减小;桩身上部一定范围内产生负摩阻力。分析结果能够为模块化建筑单元构件设计及刚性桩复合地基基础优化设计提供参考。

黄土区楔形桩-网复合地基承载特性

[目的]针对黄土地区中楔形桩-网复合地基的承载性能进行探究.[方法]开展以几何相似常数为第一基本量、重度相似常数为第二基本量的土工模型试验,研究了不同受荷区域基桩承载能力,并通过有限元计算方法进一步分析其承载特性.比较模型试验结果与有限元计算结果,揭示了黄土区楔形桩-网复合地基的荷载沉降、桩身轴力、侧摩阻力、桩土应力比及荷载分担比等分布与变化规律.[结果]复合地基沉降变化总体趋于均匀,荷载-沉降曲线为缓变型;不同受荷区域基桩的桩身轴力、侧摩阻力呈现明显差异性;楔形桩-土相互作用与荷载和深度呈现正相关关系,但存在一定上限;复合地基中楔形桩随荷载增大能有效分散桩身应力,并将荷载由桩体向桩周土传递、由地基中心向外围扩散.[结论]楔形桩-网复合地基表现出良好的承载能力,直接受荷区桩能更高效地发挥楔形桩承载特性,楔形桩在复合地基中很好地实现桩-网-土协同作用.

就地固化联合复合地基对堆载邻近桩基的影响

路桥并线路基修筑引起既有桥桩产生挠曲、侧向位移,严重时可能会造成重大坍塌事故的发生。结合工程现场试验,针对道路施工对邻近桥桩影响问题提出就地固化联合复合地基加固新方法,联合数值模型分析就地固化深度、固化土弹性模量和复合地基相关因素对邻近桩基的保护效果。研究结果表明:搅拌桩加固影响深度为1.5倍桩长左右,素混凝土桩施工会对被动桩在0.75倍桩长左右处产生最大水平位移。就地固化(2.0 m)+水泥搅拌桩法(1.8 m)可极大减小被动桩浅层水平位移,保护桥桩的安全。当固化土水泥掺量为5%~7%、水泥搅拌桩水泥掺量为12%~18%时,提高水泥掺量对减小被动桩水平位移有着明显的作用。同时,将普通褥垫层水泥搅拌桩替换为就地固化+水泥搅拌桩复合地基,桩身最大负弯矩减小近16.6%。

雄安新区建筑地基处理实践与探讨

以雄安新区起步区建筑地基处理工程为例,分析了场地的工程地质和水文地质条件,分别介绍了某多层建筑和某高层建筑的地基处理以及基坑支护的设计与施工情况。通过复合地基静荷载试验和单桩静荷载试验,探讨了复合地基承载力和单桩承载力。从技术与经济两个方面分析比较了高含水率场地CFG复合地基处理方案与灌注桩基础方案优劣。本研究可为下一阶段雄安新区的全面建设提供理论支持和经验借鉴。

不均匀地层中刚性桩复合地基变形及加固措施分析

刚性桩复合地基凭借其工后沉降小、施工周期短、整体稳定性强、社会经济效益高等优势,逐渐得到广泛应用,但也伴随着一些工程问题,如在不均匀地层下刚性桩复合地基路堤容易出现稳定性问题。本文针对不均匀地层下刚性桩复合地基典型工程案例展开研究,采用有限元软件建立三维模型,揭示改进方案前后不均匀地层下刚性桩复合地基的变形规律,研究3种加固方式对于刚性桩复合地基稳定性的增强效果。结果表明:不均匀地层下刚性桩复合地基会产生偏应力进而引起路堤差异沉降,结构稳定性较差,改进方案可以有效降低路堤沉降,提高结构整体稳定性,横梁加固可以有效提高刚性桩复合地基的水平稳定性。

黄淮冲积平原地区高速铁路螺杆桩复合地基应用研究

依托郑徐客运专线兰考南站路基工程螺杆桩复合地基项目,通过试桩和桩身质量检测,总结黄淮冲积平原地区螺杆桩关键施工工艺和质量控制措施,同时对螺杆桩承载力特性及复合地基进行工后沉降分析。结果表明:黄淮冲积平原地区粉质黏土、粉砂、细砂、圆砾土土层中可以形成螺杆桩螺纹段桩身,成桩质量良好;螺杆桩单桩承载力和复合地基承载力满足设计要求;该地区同等条件下,螺杆桩极限承载力较普通灌注桩提高约24%;复合地基沉降主要发生在填筑期;双曲线法预测得出三个观测断面工后沉降量均小于15mm,满足无砟轨道铺设要求。