Fiber Grating Ring Laser in All Optical Communication System

Erbium fiber grating ring laser (EFRL) witn an integrated travelling wave and low polarization mode noise is reported. Through modulated experiment of a successful 2.488 Gb/s RZ data, it is shown that the EFRL is a promising alternative to DFB lasers for high-speed transmission applications.

An experiment of dynamical behaviours in an erbium-doped fibre-ring laser with loss modulation

This paper reports a systematic experimental investigation on the dynamics in the low-frequency region in an erbium-doped fibre-ring laser with loss modulation. A rich variety of bifurcation is analyzed through the bifurcation diagram and structured with the concept of the winding numbers. The coexistence of multiple attractors and the crisis that appear in the saddle-node bifurcations, and an interesting structure of bifurcation which is similar to the bifurcations in high-frequency range, have been observed.

Continuous-Wave and Actively Q-Switched Diode-Pumped Er:LuAG Ring Laser at 1650 nm

We demonstrate a cw and actively Q-switched Er：LuAO laser resonantly dual-end-pumped by 1532nm fibre- coupled laser diodes. A maximum cw output power of 1.9W at 1650.3nm is obtained at a pump power of 25.5 W, corresponding to a slope efficiency of 43.3 %. In the Q-switched regime, the maximum pulse energy of 3.51 mJ is reached at a pulse repetition rate of 100 Hz, a pulse duration of 90.5ns and a pump power of 25.5 W. At the repetition rate of 400 Hz, the output energy is 2.12m J, corresponding to a pulse duration of 125.4 ns.

Using Brillouin fiber-optic ring laser to provide base station with uplink optical carrier in a 10 GHz radio over fiber system

In this paper, a 10 GHz radio over fiber system is analyzed. The Brillouin fiber-optic ring laser is used in the center station （CS） to suppress the optical carrier for the modulation depth enhancement. Simultaneously, the Stockes wave induced by the Brillouin amplification injects and locks the Fabry-Perot （FP） laser to output a signal-mode optical source, which works as the uplink optical carrier.

Experimental investigation on chaos generation in erbium-doped fiber single-ring lasers

In this paper,the chaotic behaviors in an erbium-doped fiber（EDF） single-ring laser（EDFSRL） are investigated experimentally by using the loss modulation method.An electro-optic modulator（EOM） made of LiNbO 3 crystal is added to the system.Thus,by changing the modulation voltage and the modulation frequency of the EOM,the freedom of the EDFSRL system is increased.The chaotic characteristics of the system are studied by observing the time series and the power spectra.The experimental results indicate that the erbium-doped fiber single-ring laser system can enter into chaos states through period-doubling bifurcation and intermittency routes.

Semiconductor Optical Amplifier (SOA)-Fiber Ring Laser and Its Application to Stress Sensing

We have developed a novel optical fiber ring laser using a semiconductor optical amplifier (SOA) as the gain medium, and taking advantage of polarization anisotropy of its gain. The frequency difference of the bi-directional laser is controlled by birefringence which is introduced in the ring laser cavity. The beat frequency generated by combining two counter-propagating oscillations is proportional to the birefringence, the fiber ring laser of the present study is, therefore, applicable to the fiber sensor. The sensing signal is obtained in a frequency domain with the material which causes the retardation change by a physical phenomenon to be measured. For the application to stress sensing, the present laser was investigated with a photoelastic material.

Mode decoupling in solid state ring laser based on stimulated Raman effect in polar crystals

In this paper we study the gain saturation induced mode-coupling control in solid state ring laser devices based on the stimulated Raman effect of the polar crystals in.order to realize solid state ring laser gyroscopes. We theoretically investigate the mode coupling induced by gain saturation between clockwise （CW） and counterclockwise （CCW） propa- gating laser modes. Because the CW and CCW running waves are pumped with counter-propagating lasers respectively, the independent coexistence can be ensured.

In-Line Inspection of Pipeline Defects Detection Using Ring-Type Laser

Pipeline plays a vital role in transporting fluids like oils, water, and petrochemical substances for longer distances. Based on the materials they carry, prolonged usage may cause the initiation of defects in the pipeline. These defects occur due to the formed salt deposits, chemical reaction happens between the inner surface and the transferring substance, prevailing environmental conditions, etc. These defects, if not identified earlier may lead to significant losses to the industry. In this work, an in-line inspection system utilizes the nondestructive way for analyzing the internal defects in the petrochemical pipeline. This system consists of a pipeline inspection robot having two major units namely the visual inspection unit and the power carrier unit. The visual inspection unit makes use of a ring-type laser diode and the camera. The laser diode serves as a light source for capturing good quality images of inspection. This unit is controlled by the Arduino in the power carrier unit which provides the necessary movement throughout the pipe. The inspected images captured by the camera are further processed with the aid of NI vision assistant software. After applying the processing function parameters provided by this software, the defect location can be clearly visualized with high precision. Three sets of defects are introduced in a Polylactide (PLA) pipe based on its position and angle along the circumference of the pipe. Further, this robot system serves as a real-time interactive image synchronization system for acquiring the inspected images. By comparing the actual and calculated defect size, the error percentage obtained was less than 5%.

Investigation on the intensity noise characteristics of the semiconductor ring laser

Based on the frequency-domain multimode theoretical model, detailed investigations on the noise characteristic of the semiconductor ring laser （SRL） are first performed in this paper. The comprehensive nonlinear terms related to the third order nonlinear susceptibility Z3 are included in this model; the Langevin noise sources for electric field and carrier density fluctuations are also taken into account. As the injection current increases, the SRL may present several operation regimes. Remarkable and unusual low frequency noise enhancement in the form of a broad low frequency tail extending all the way to the relaxation oscillation peak is observed in any of the operation regimes of SRLs. The influences of the backscattering coefficient on the relative intensity noise （RIN） spectrum in typical operation regimes are investigated in detail.

Statistical Properties of a Ring Laser with Injected SIgnal and Backscattering

The statistical properties of a homogeneously broadened ring laser with an injected signal are investigated and the normalized two-mode intensity auto- and cross-correlation functions are calculated by a full saturation laser theory with backscattering. The theoretical predictions are in good agreement with the experimental measurements.Further investigation reveals that the backscattering can reduce the fluctuations in the system while the full saturation effect plays a major role when the laser is operated above threshold. It is also quite important to notice that the injected signal can drive the weak mode from incoherent light to coherent light.

The λ-Characteristics of the Ring Laser Based on Non-Uniform SOA

Semiconductor optical amplifier-based ring cavity laser (SOA-RL), which has been widely used in optical communications, optical fiber sensing, and biophotonics fields, can be tuned at an ultra high speed up to Mega Hertz over 100 nm bandwidth range with high SNR and flatness output. A steady-state model and segmentation algorithms are employed to investigate the gain spectra of four kinds of non-uniform SOA and the lasing wavelength of the SOA-RL. It shows that the dependence of the lasing wavelength on the average width is stronger when the light propagates from narrower to wider end than conversely, and there are some particular structures to show ultra high stability lasing wavelength. It is supposed that the main reason could be the carrier density distribution along the propagation.

Tunable photonic microwave generated by multi-wavelength Brillouin fiber laser

Aimed at the problem of narrow tunability and low frequency microwave signal generated by the optical method,a novel approach to stabilizing the tunable photonic microwave generated by the multi-wavelength Brillouin fiber laser is proposed and is experimentally demonstrated.A singlelongitudinal-mode Brillouin fiber laser is designed,and by using the laser,a multi-wavelength Brillouin fiber laser with more than eleven orders of Stokes wave is observed.The wavelength spacing of the adjacent Stokes wave is 0.085 nm.If the Brillouin pump power is increased,the number of Stokes wave output can be further increased.The tunable microwave signals of 10.8 and 21.6 GHz are obtained by heterodyning the Rayleigh wave and Stokes wave of the multiwavelength Brillouin fiber laser.In the experiment,by tuning the pump wavelength and temperature of the gain fiber,microwave signals at different frequencies are generated.The tunable frequency range can be further expanded by using a temperature controller with a wider adjustment range,and the generated microwave signal exhibits high stability on frequency.

太阳系中太阳和行星的引力磁与Lense-Thirring效应

简述基本物理中引力试验的概况,特别是检测试验粒子绕中央旋转天体引起LenseThirring(LT)效应的研究进展。给出自旋质点在旋转体引力电磁(Gravitoelectromagnetism,GEM)中运动的Schiff公式。描述了检测地球LT效应的各种方法:激光测卫、GP-B、激光测月和环形激光陀螺,特别叙述了环形激光陀螺仪在地球科学上的应用,如地震、潮汐、地球自转、极移的检测,并给出了正在进行和未来更高精度测定LT效应的LARES、OPTIS等计划。叙述了检验火星LT效应的情况,包括用MGS测距资料、火星自然卫星Phobos和Deimos观测资料,以及今后发射绕火星探测器的建议。也谈及用太阳系行星(水星、金星、火星)测定太阳LT效应和未来采用国际空间站进行相对论检验的LATOR计划。最后,简述在脉冲双星、X射线双星和银心Sgr A*附近红外S系统恒星中引力场的广义相对论效应,以及我国开展该项工作的情况和提出的建议。

Multiple-Pulse Operation in Passively Mode-Locked Fibre Laser with Positive Dispersion Cavity

We report the observation of rectangular shape spectrum in passively mode-locked fibre laser with positive dispersion cavity. The spectrum is broad and flat, and 3dB bandwidth can be up to 17.61 nm. Multiple-pulse operation is observed in our laser system. The spectrum width, pulse energy, pulse width and peak power of the mode-locked laser output change with the appearance of multiple-pulse operation.

High power high beam quality diode-pumped 1319-nm Nd:YAG oscillator-amplifier laser system

This paper demonstrated a high power and high beam quality diode-pumped 1319-nm Nd：YAG master oscillator-power amplifier laser system. A thermally near-unstable resonator with four-rod birefringence compensation fiat-fiat cavity was adopted as the master oscillator. A solid etalon was inserted in the unidirectional ring resonator to compress the laser linewidth. Under a repetition rate of 500 Hz and pulse width of 160 μs, the master oscillator delivers an average output power of 16.8 W at 1319 nm with linear polarisation, beam quality factor M^2=1.16 and linewidth of 3.2 GHz. A double-pass power amplifier with two amplifier stages was employed for higher power scaling and the output power was amplified to be 25.9 W with M^2 = 1.43.

Experimental Study of a Pulsed Ytterbium-Doped Fibre Laser with Fast and Slow Saturable Absorbers in a Linear Cavity

We present a linear-cavity stretched-pulse fibre laser and by semiconductor saturable-absorber mirrors. A with mode locking by a nonlinear polarization rotation Q-switched mode-locking cw train and a mode-locking pulse train are obtained in the experiment. We investigate the effects of the equivalent fast saturable absorber and the slow saturable absorbers in experiment. It is found that neither the nonlinear polarization evolution effect nor a semiconductor saturable absorber mirror is enough to produce the stable cw mode-locking pulses in this experiment. A nonlinear polarization evolution effect controls the cavity loss to literally carve the pulses; semiconductor saturable absorber mirrors provide the self-restarting and maintain the stability of the modelocking operation.

Stochastic Resonance in Quantum-Well Semiconductor Lasers

The quantum well （QW） semiconductor lasers have become main optical sources for optical fibre communication systems because of their higher modulation speed, broader modulation bandwidth and better temperature characteristics. In order to improve the quality of direct-modulation by means of the stochastic resonance （SR） mechanism in QW semiconductor lasers, we investigate the behaviour of the SR in dlrect-modulated QW semiconductor laser systems. Considering the cross-correlated carrier noise and photon noise, we calculate the power spectrum of the photon density and the signal-to-noise ratio （SNR） of the direct-modulated laser system by using the linear approximation method. The results indicate that the SR always appears in the dependence of the SNR on the bias current density, and is strongly affected by the cross-correlation coefficient of the carrier and photon noises, the frequency of modulation signal, and the photon lifetime in the laser cavity.

High-speed chaotic communication using an optical fibre ring as a key

A chaotic communication scheme with a fibre ring inserted in the optical ~eedback of the transmitter laser as an additional key is proposed under anticipating synchronization. The numerical results show that the key can enhance the communication security effectively. It is theoretically safe for the communication scheme to transmit messages with a frequency beyond the relaxation oscllation frequency.

Thermal Stress Monitoring on Piston Rings by Real Time Holographic Interferometry

In this paper, real time holographic Interferometry (RTHI) technique was used to monitor the thermal stress on the piston rings. The piston rings holograms were recorded and the holographic plate replaced on the holder after development. The piston ring was subjected to thermal stress as it was illuminated by Laser beam acting as the object beam. This process led to generation of interferograms which were captured by a CCD camera at different temperatures. The captured interferograms were analyzed using atmosfringe version 3.3 software. From the analysis, the peak to valley (P-V) aberrations measured for each of the piston ring varied for the same temperature value. The P-V aberrations ranging from 0.0128λ to 1.2989λ were obtained. From this result, it was evident that the three rings on the piston had different unique structural characteristics due to their function.

Absolute density measurement of nitrogen dioxide with cavity-enhanced laser-induced fluorescence

The absolute number density of nitrogen dioxide（NO2） seeded in argon is measured with cavity-enhanced laserinduced fluorescence（CELIF） through using a pulsed laser beam for the first time. The cavity ring down（CRD） signal is acquired simultaneously and used for normalizing the LIF signal and determining the relationship between the measured CELIF signal and the NO2 number density. The minimum detectable NO2 density down to（3.6±0.1）10^8 cm^-3 is measured in 60 s of acquisition time by the CELIF method. The minimum absorption coefficient is measured to be（2.0±0.1）10^-9 cm^-1, corresponding to a noise equivalent absorption sensitivity of（2.2±0.1）10^9 cm.^-1Hz^-1/2. The experimental system demonstrated here can be further improved in its sensitivity and used for environmental monitoring of outdoor NO2 pollution.