Research on compact manufacturing technology for shape and performance controllability of metallic components can reanze the simplification and high-reliability of manufacturing process on the premise of satisfying th...Research on compact manufacturing technology for shape and performance controllability of metallic components can reanze the simplification and high-reliability of manufacturing process on the premise of satisfying the requirement of macro/micro-structure. It is not only the key paths in improving performance, saving material and energy, and green manufacturing of components used in major equipments, but also the challenging subjects in frontiers of advanced plastic forming. To provide a novel horizon for the manufacturing in the critical components is significant. Focused on the high-performance large-scale components such as bearing rings, flanges, railway wheels, thick-walled pipes, etc, the conventional processes and their developing situations are summarized. The existing problems including multi-pass heating, wasting material and energy, high cost and high-emission are discussed, and the present study unable to meet the manufacturing in high-quality components is also pointed out. Thus, the new techniques related to casting-rolling compound precise forming of rings, compact manufacturing for duplex-metal composite rings, compact manufacturing for railway wheels, and casting-extruding continuous forming of thick-walled pipes are introduced in detail, respectively. The corresponding research contents, such as casting ring blank, hot ring rolling, near solid-state pressure forming, hot extruding, are elaborated. Some findings in through-thickness microstructure evolution and mechanical properties are also presented. The components produced by the new techniques are mainly characterized by fine and homogeneous grains. Moreover, the possible directions for fin＇ther development of those techniques are suggested. Finally, the key scientific problems are first proposed. All of these results and conclusions have reference value and guiding significance for the integrated control of shape and performance in advanced compact manufacturing.展开更多
On the basis of analyzing the typical kinds of balloon controllers used now, this article provides a new type one named Fixed Bell Shaped Balloon Controller. Experiments have been made to verify the function of it. Re...On the basis of analyzing the typical kinds of balloon controllers used now, this article provides a new type one named Fixed Bell Shaped Balloon Controller. Experiments have been made to verify the function of it. Results indicated that the facility has quite good effect on the improvement of yarn quality and properties in addition to controlling yarn tension.展开更多
The three ring reducer is studied both in theory and experiment. In order to improve the dynamic characteristics and reduce the vibration and noise, based on the sensitivity analysis of design parameters of dynamic c...The three ring reducer is studied both in theory and experiment. In order to improve the dynamic characteristics and reduce the vibration and noise, based on the sensitivity analysis of design parameters of dynamic characteristics, the system geometry parameters are optimized, and the structure of reducer is developed according to the optimum result, then the specimens of reducer are designed and manufactured. The effect of the structure development has been verified by comparing the original and developed reducer through the vibration tests.展开更多
Polymerization of three cyclic ketene acetals: i.e., 5,6-benzo-2-methylene-1,3-dioxepane (BMDO), 2-methylene-4phenyl-1,3-dioxolane (MPDO) and 4,7-dimethyl-2-methylene-1,3-dioxepane (DMMDO) were carried out in the pres...Polymerization of three cyclic ketene acetals: i.e., 5,6-benzo-2-methylene-1,3-dioxepane (BMDO), 2-methylene-4phenyl-1,3-dioxolane (MPDO) and 4,7-dimethyl-2-methylene-1,3-dioxepane (DMMDO) were carried out in the presence of ethyl alpha -bromobutyrate/CuBr/2,2'-bipyridine respectively. The structures of poly(BMDO), poly(MPDO) and poly(DMMDO) were characterized by H-1 and C-13-NMR spectra. The effects of monomer structure on the behavior of atom transfer free radical ring-opening polymerization were investigated and the mechanism of controlled free radical ring-opening polymerization was discussed.展开更多
The relevant results of thermodynamics simulation test, recrystallization study and FEM numercal simulation are described. A method is also introduced that the controlled hot forming is carried out by adopting the pro...The relevant results of thermodynamics simulation test, recrystallization study and FEM numercal simulation are described. A method is also introduced that the controlled hot forming is carried out by adopting the program of expansion-extrusion compound forming.展开更多
Hourglass is remarkably aroused in ring rolling simulation with reduced integration element because of violent ring vibration and small contact area of ring with forming rollers. Hourglass energy can be reduced by imp...Hourglass is remarkably aroused in ring rolling simulation with reduced integration element because of violent ring vibration and small contact area of ring with forming rollers. Hourglass energy can be reduced by improving mesh density. Combined approach of artificial damping and artificial stiffness can control the hourglass. A ring with rectangular section is simulated with the weight factor of artificial stiffness resistance set to 0.2. The artificial damping hourglass control coefficient is set to 0.1, and the artificial stiffness hourglass control coefficient is set to 0.001. The ratio of hourglass energy to internal energy is reduced to 2.5 percent. Compared with axial spread width test, the effectiveness of hourglass control in ring rolling simulation is verified.展开更多
A new configuration for delay cells used in voltage controlled oscillators is presented. A jitter comparison between the source-coupled differential delay cell and the proposed CMOS inverter based delay cell is given....A new configuration for delay cells used in voltage controlled oscillators is presented. A jitter comparison between the source-coupled differential delay cell and the proposed CMOS inverter based delay cell is given. A new method to optimize loop parameters based on low-jitter in PLL is also introduced. A low-jitter 1.25GHz Serdes is implemented in a 0.35μm standard 2P3M CMOS process. The result shows that the RJ （random jitter） RMS of 1.25GHz data rate series output is 2. 3ps （0. 0015UI） and RJ （1 sigma） is 0. 0035UI. A phase noise measurement shows - 120dBc/Hz@100kHz at 1111100000 clock-pattern data out.展开更多
In this paper, analysis of the beam orbit stability and conceptual study of the dynamic orbit feedback inthe SSRF storage ring are presented. It is shown that beam orbit position movement at the photon source points i...In this paper, analysis of the beam orbit stability and conceptual study of the dynamic orbit feedback inthe SSRF storage ring are presented. It is shown that beam orbit position movement at the photon source points issmaller than the orbit stability requirements in horizontal plane, but exceeds the orbit stability requirements in verticalplane. A dynamic global orbit feedback system, which consists of 38 high-bandwidth air-coil correctors and 40high-precise BPMs, is proposed to suppress the vertical beam orbit position movement. Numerical simulations showthat this dynamic orbit feedback system can stabilize the vertical beam orbit position movement in the frequencyrange up to 100 Hz.展开更多
The pathogen,pathogenic mechanism and incidence condition of pear ring rot,and its damage on fruits,branches and leaves are summarized in the paper. The control measures including plant quarantine,agricultural control...The pathogen,pathogenic mechanism and incidence condition of pear ring rot,and its damage on fruits,branches and leaves are summarized in the paper. The control measures including plant quarantine,agricultural control,physical control,biological control,and chemical control against pear ring rot are reviewed.展开更多
In order to improve the quality of yarn,a research was carried out at ring spinning.A modifiedtraveller has been used to reduce the yarn hairiness vastly.According to the statistical analysis ofthe data,it was found t...In order to improve the quality of yarn,a research was carried out at ring spinning.A modifiedtraveller has been used to reduce the yarn hairiness vastly.According to the statistical analysis ofthe data,it was found that the geometrical shape of travellers is the key factor affecting the yarnhairiness at ring spinning.展开更多
After retrieving all papers with the theme of ＂apple ring rot＂ from 1994 to 2010, the article made a statistical analysis on locations, occurrence degree, regularity, prevention and treatments of apple ring rot acco...After retrieving all papers with the theme of ＂apple ring rot＂ from 1994 to 2010, the article made a statistical analysis on locations, occurrence degree, regularity, prevention and treatments of apple ring rot according to published time. The results showed that the occurrence degree of apple ring rot increased year by year, and were uneven among the major apple producing areas with a trend of spreading gradually from east to west. Researchers had paid more attention to control and pharmaceutical experiments of ring rot, while the studies on basic research, projections and forecasts of the disease were not enough. Some prevention and control recommendations of apple ring rot were proposed based on the detailed analysis.展开更多
This work summarizes the structure and operating features of a high-performance 3-stage dual-delay-path (DDP) voltage-controlled ring oscillator (VCRO) with self-biased delay cells for Phase-Locked Loop (PLL) structur...This work summarizes the structure and operating features of a high-performance 3-stage dual-delay-path (DDP) voltage-controlled ring oscillator (VCRO) with self-biased delay cells for Phase-Locked Loop (PLL) structurebased clock generation and digital system driving. For a voltage supply V<sub>DD</sub> = 1.8 V, the resulting set of performance parameters include power consumption P<sub><sub></sub>DC</sub> = 4.68 mW and phase noise PN@1MHz = -107.8 dBc/Hz. From the trade-off involving P<sub>DC</sub> and PN, a system level high performance is obtained considering a reference figure-of-merit ( FoM = -224 dBc/Hz ). Implemented at schematic level by applying CMOS-based technology (UMC L180), the proposed VCRO was designed at Cadence environment and optimized at MunEDA WiCkeD tool.展开更多
基金Supported by National Natural Science Foundation of China(Grant Nos.51675361,51575371)Key Program of National Natural Science Foundation of China(Grant No.51135007)Key Research Project of Shanxi Province(Grant No.03012015004)
文摘Research on compact manufacturing technology for shape and performance controllability of metallic components can reanze the simplification and high-reliability of manufacturing process on the premise of satisfying the requirement of macro/micro-structure. It is not only the key paths in improving performance, saving material and energy, and green manufacturing of components used in major equipments, but also the challenging subjects in frontiers of advanced plastic forming. To provide a novel horizon for the manufacturing in the critical components is significant. Focused on the high-performance large-scale components such as bearing rings, flanges, railway wheels, thick-walled pipes, etc, the conventional processes and their developing situations are summarized. The existing problems including multi-pass heating, wasting material and energy, high cost and high-emission are discussed, and the present study unable to meet the manufacturing in high-quality components is also pointed out. Thus, the new techniques related to casting-rolling compound precise forming of rings, compact manufacturing for duplex-metal composite rings, compact manufacturing for railway wheels, and casting-extruding continuous forming of thick-walled pipes are introduced in detail, respectively. The corresponding research contents, such as casting ring blank, hot ring rolling, near solid-state pressure forming, hot extruding, are elaborated. Some findings in through-thickness microstructure evolution and mechanical properties are also presented. The components produced by the new techniques are mainly characterized by fine and homogeneous grains. Moreover, the possible directions for fin＇ther development of those techniques are suggested. Finally, the key scientific problems are first proposed. All of these results and conclusions have reference value and guiding significance for the integrated control of shape and performance in advanced compact manufacturing.
文摘On the basis of analyzing the typical kinds of balloon controllers used now, this article provides a new type one named Fixed Bell Shaped Balloon Controller. Experiments have been made to verify the function of it. Results indicated that the facility has quite good effect on the improvement of yarn quality and properties in addition to controlling yarn tension.
文摘The three ring reducer is studied both in theory and experiment. In order to improve the dynamic characteristics and reduce the vibration and noise, based on the sensitivity analysis of design parameters of dynamic characteristics, the system geometry parameters are optimized, and the structure of reducer is developed according to the optimum result, then the specimens of reducer are designed and manufactured. The effect of the structure development has been verified by comparing the original and developed reducer through the vibration tests.
基金This work was supported by the National Natural Science Foundation of China (No. 59774027).
文摘Polymerization of three cyclic ketene acetals: i.e., 5,6-benzo-2-methylene-1,3-dioxepane (BMDO), 2-methylene-4phenyl-1,3-dioxolane (MPDO) and 4,7-dimethyl-2-methylene-1,3-dioxepane (DMMDO) were carried out in the presence of ethyl alpha -bromobutyrate/CuBr/2,2'-bipyridine respectively. The structures of poly(BMDO), poly(MPDO) and poly(DMMDO) were characterized by H-1 and C-13-NMR spectra. The effects of monomer structure on the behavior of atom transfer free radical ring-opening polymerization were investigated and the mechanism of controlled free radical ring-opening polymerization was discussed.
文摘The relevant results of thermodynamics simulation test, recrystallization study and FEM numercal simulation are described. A method is also introduced that the controlled hot forming is carried out by adopting the program of expansion-extrusion compound forming.
基金Supported by National Natural Science Foundation of China Key Project (50335060)
文摘Hourglass is remarkably aroused in ring rolling simulation with reduced integration element because of violent ring vibration and small contact area of ring with forming rollers. Hourglass energy can be reduced by improving mesh density. Combined approach of artificial damping and artificial stiffness can control the hourglass. A ring with rectangular section is simulated with the weight factor of artificial stiffness resistance set to 0.2. The artificial damping hourglass control coefficient is set to 0.1, and the artificial stiffness hourglass control coefficient is set to 0.001. The ratio of hourglass energy to internal energy is reduced to 2.5 percent. Compared with axial spread width test, the effectiveness of hourglass control in ring rolling simulation is verified.
文摘A new configuration for delay cells used in voltage controlled oscillators is presented. A jitter comparison between the source-coupled differential delay cell and the proposed CMOS inverter based delay cell is given. A new method to optimize loop parameters based on low-jitter in PLL is also introduced. A low-jitter 1.25GHz Serdes is implemented in a 0.35μm standard 2P3M CMOS process. The result shows that the RJ （random jitter） RMS of 1.25GHz data rate series output is 2. 3ps （0. 0015UI） and RJ （1 sigma） is 0. 0035UI. A phase noise measurement shows - 120dBc/Hz@100kHz at 1111100000 clock-pattern data out.
文摘In this paper, analysis of the beam orbit stability and conceptual study of the dynamic orbit feedback inthe SSRF storage ring are presented. It is shown that beam orbit position movement at the photon source points issmaller than the orbit stability requirements in horizontal plane, but exceeds the orbit stability requirements in verticalplane. A dynamic global orbit feedback system, which consists of 38 high-bandwidth air-coil correctors and 40high-precise BPMs, is proposed to suppress the vertical beam orbit position movement. Numerical simulations showthat this dynamic orbit feedback system can stabilize the vertical beam orbit position movement in the frequencyrange up to 100 Hz.
文摘The pathogen,pathogenic mechanism and incidence condition of pear ring rot,and its damage on fruits,branches and leaves are summarized in the paper. The control measures including plant quarantine,agricultural control,physical control,biological control,and chemical control against pear ring rot are reviewed.
文摘In order to improve the quality of yarn,a research was carried out at ring spinning.A modifiedtraveller has been used to reduce the yarn hairiness vastly.According to the statistical analysis ofthe data,it was found that the geometrical shape of travellers is the key factor affecting the yarnhairiness at ring spinning.
基金Supported by Special Fund for Agro-scientific Research in the Public Interest"Species and Damage Characteristic of Pests in Apple" (200903004-42)"Research and Demonstration of Fruit Trees Rot Disease Prevention and Control Technology"(201203034)
文摘After retrieving all papers with the theme of ＂apple ring rot＂ from 1994 to 2010, the article made a statistical analysis on locations, occurrence degree, regularity, prevention and treatments of apple ring rot according to published time. The results showed that the occurrence degree of apple ring rot increased year by year, and were uneven among the major apple producing areas with a trend of spreading gradually from east to west. Researchers had paid more attention to control and pharmaceutical experiments of ring rot, while the studies on basic research, projections and forecasts of the disease were not enough. Some prevention and control recommendations of apple ring rot were proposed based on the detailed analysis.
文摘This work summarizes the structure and operating features of a high-performance 3-stage dual-delay-path (DDP) voltage-controlled ring oscillator (VCRO) with self-biased delay cells for Phase-Locked Loop (PLL) structurebased clock generation and digital system driving. For a voltage supply V<sub>DD</sub> = 1.8 V, the resulting set of performance parameters include power consumption P<sub><sub></sub>DC</sub> = 4.68 mW and phase noise PN@1MHz = -107.8 dBc/Hz. From the trade-off involving P<sub>DC</sub> and PN, a system level high performance is obtained considering a reference figure-of-merit ( FoM = -224 dBc/Hz ). Implemented at schematic level by applying CMOS-based technology (UMC L180), the proposed VCRO was designed at Cadence environment and optimized at MunEDA WiCkeD tool.
