Torque Ripple Suppression Control Strategy for Brushless Integrated Starter/Generator Wound-Field Synchronous Motor

A flux linkage compensation field oriented control (FOC) method was proposed to suppress the speed and torque ripples of a brushless wound-field synchronous motor in its starting process. The starting process was analyzed and the model of wound-field synchronous electric machine was established. The change of field current of the electric machine was described mathematically for simplified exciter and rotate rectifier. Based on the traditional field control, the flux linkage compensation was introduced in d-axis current to counteract the flux ripple. Some simulation and preliminary experiments were implemented. The results show that the proposed method is feasible and effective.

Comparative Investigation of Torque-ripple Suppression Control Strategies Based on Torque-sharing Function for Switched Reluctance Motor

Torque ripple is an inherent property of switched reluctance motor(SRM),which seriously affects the control performance and application of the motor.This paper proposes two torque ripple suppression control strategies based on torque-sharing function(TSF).According to the symmetry characteristics of the flux linkage and rotor position curve family,a fourth-order Fourier series is used to fit the SRM flux linkage analytical model.The coefficient of each harmonic term of the flux linkage model is a function related to current,expressed by a sixth-order polynomial.The torque analytical formula can be derived from the flux linkage model.The torque error is calculated via the identified torque model and is compensated through TSF controller in order to reduce torque ripple.The torque model can also be used to establish the torque loop to achieve accurate tracking of the TSF reference torque to reduce torque ripple.Digital simulation was conducted,followed by the implementation on a SRM test bench using a 28335DSP as the master control chip.The experimental results are consistent with the simulation results,and indicate the effectiveness of the proposed schemes.

Four-quadrant Force Control with Minimal Ripple for Linear Switched Reluctance Machines

Linear switch reluctance machine(LSRM)has been tried to act as an alternative generator for direct drive linear wave energy converter(WEC).Many researchers have proposed new topologies of LSRM to improve the power density,efficiency and reliability.However,the control methods for LSRM applied in direct drive WEC have been paid little attention,especially control methods considering the wave energy generator operating characteristics.In this paper,according to the generator control requirements of the direct drive WEC,force control algorithm for LSRM operating in four quadrants without a speed closed loop is put forward.The force ripple of LSRM is suppressed using force sharing function method.The four-quadrant control is easy to realize requiring only phase currents information.Simulation results validate the proposed method and indicate that LSRM is able to be used as the generator for direct drive WEC.

Electromagnetic characteristic analysis and design of a linear motor used for ultra-high-speed EMS maglev train

The operating speed of the commercial electromagnetic suspension(EMS)maglev train has been over 430 km/h,making it the fastest means of land transportation.With the increasing demands of people traveling,it is necessary to further improve the operating speed of maglev trains.Aiming to examine whether the existing EMS system can meet the requirements of ultra-highspeed operation(more than 600 km/h),the electromagnetic characteristics of an EMS linear motor under the operating speed of 600–1000 km/h fed by a square-wave voltage supply is investigated in this article.First,an electromagnetic field model of the EMS system under the square-wave voltage supply is established to investigate its electromagnetic performance,e.g.,the characteristics of phase current,the magnetic flux density,and the electromagnetic force.Second,the relationship between the harmonic components of the air-gap magnetic flux density and electromagnetic force is investigated using the two-dimensional fast Fourier transform(2D-FFT)to reveal the mechanism of electromagnetic force ripple.Third,to address the issues of excessive armature current density and significant electromagnetic force ripple,the linear motor is re-designed by enlarging the stator slot area and reshaping the mover's main magnetic poles.Furthermore,the Taguchi method is used to further improve the electromagnetic characteristics of the linear electric motor.Finally,the effectiveness of the proposed optimal design is validated by the finite-element analysis(FEA)based co-simulation.