3D Road Network Modeling and Road Structure Recognition in Internet of Vehicles

Internet of Vehicles (IoV) is a new system that enables individual vehicles to connect with nearby vehicles,people, transportation infrastructure, and networks, thereby realizing amore intelligent and efficient transportationsystem. The movement of vehicles and the three-dimensional (3D) nature of the road network cause the topologicalstructure of IoV to have the high space and time complexity.Network modeling and structure recognition for 3Droads can benefit the description of topological changes for IoV. This paper proposes a 3Dgeneral roadmodel basedon discrete points of roads obtained from GIS. First, the constraints imposed by 3D roads on moving vehicles areanalyzed. Then the effects of road curvature radius (Ra), longitudinal slope (Slo), and length (Len) on speed andacceleration are studied. Finally, a general 3D road network model based on road section features is established.This paper also presents intersection and road section recognition methods based on the structural features ofthe 3D road network model and the road features. Real GIS data from a specific region of Beijing is adopted tocreate the simulation scenario, and the simulation results validate the general 3D road network model and therecognitionmethod. Therefore, thiswork makes contributions to the field of intelligent transportation by providinga comprehensive approach tomodeling the 3Droad network and its topological changes in achieving efficient trafficflowand improved road safety.

Assessing the impacts of human activities and climate variations on grassland productivity by partial least squares structural equation modeling(PLS-SEM)

The cause-effect associations between geographical phenomena are an important focus in ecological research. Recent studies in structural equation modeling（SEM） demonstrated the potential for analyzing such associations. We applied the variance-based partial least squares SEM（PLS-SEM） and geographically-weighted regression（GWR） modeling to assess the human-climate impact on grassland productivity represented by above-ground biomass（AGB）. The human and climate factors and their interaction were taken to explain the AGB variance by a PLS-SEM developed for the grassland ecosystem in Inner Mongolia, China. Results indicated that 65.5% of the AGB variance could be explained by the human and climate factors and their interaction. The case study showed that the human and climate factors imposed a significant and negative impact on the AGB and that their interaction alleviated to some extent the threat from the intensified human-climate pressure. The alleviation may be attributable to vegetation adaptation to high human-climate stresses, to human adaptation to climate conditions or/and to recent vegetation restoration programs in the highly degraded areas. Furthermore, the AGB response to the human and climate factors modeled by GWR exhibited significant spatial variations. This study demonstrated that the combination of PLS-SEM and GWR model is feasible to investigate the cause-effect relation in socio-ecological systems.

The Shortest Path Analysis Based on Road Network

Rational planning of agricultural product transport route from initial node to destination node can effectively reduce the cost price of agricultural products,and the calculation of shortest path between any two points also affects people’s daily travel.Taking Heze Railway Station to Heze College for example,with remote sensing image data as the base map,we conduct vectorization and topological analysis on roads in the target area.With Dijkstra as theoretical basis of shortest path algorithm,we use ArcG IS network analysis method to build road network,and calculate the planning program of the shortest distance path,the shortest path by driving and the shortest path by walking.

Nonlinear density wave and energy consumption investigation of traffic flow on a curved road

A new car-following model is proposed based on the full velocity difference model（FVDM） taking the influence of the friction coefficient and the road curvature into account. Through the control theory, the stability conditions are obtained,and by using nonlinear analysis, the time-dependent Ginzburg-Landau（TDGL） equation and the modified Korteweg-de Vries（mKdV） equation are derived. Furthermore, the connection between TDGL and mKdV equations is also given. The numerical simulation is consistent with the theoretical analysis. The evolution of a traffic jam and the corresponding energy consumption are explored. The numerical results show that the control scheme is effective not only to suppress the traffic jam but also to reduce the energy consumption.

Study of Load Modeling Technology on Hardware-in-the-Loop Simulator of Gun Servo System

A hardware-in-the-loop (HWIL) simulator for gun servo system is described in this paper, and its load modeling technologies,such as road spectrum model,sea wave model are studied. The simulation results show that the models can be used in HWIL and satisfy the requirements of hardware-in-the-loop simulator of gun servo system.

Machine learning applied to road safety modeling:A systematic literature review

Road safety modeling is a valuable strategy for promoting safe mobility,enabling the development of crash prediction models(CPM)and the investigation of factors contributing to crash occurrence.This modeling has traditionally used statistical techniques despite acknowledging the limitations of this kind of approach(specific assumptions and prior definition of the link functions),which provides an opportunity to explore alternatives such as the use of machine learning(ML)techniques.This study reviews papers that used ML techniques for the development of CPM.A systematic literature review protocol was conducted,that resulted in the analysis of papers and their systematization.Three types of models were identified:crash frequency,crash classification by severity,and crash frequency and severity.The first is a regression problem,the second,a classificatory one and the third can be approached either as a combination of the preceding two or as a regression model for the expected number of crashes by severity levels.The main groups of techniques used for these purposes are nearest neighbor classification,decision trees,evolutionary algorithms,support-vector machine,and artificial neural networks.The last one is used in many kinds of approaches given the ability to deal with both regression and classification problems,and also multivariate response models.This paper also presents the main performance metrics used to evaluate the models and compares the results,showing the clear superiority of the ML-based models over the statistical ones.In addition,it identifies the main explanatory variables used in the models,which shows the predominance of road-environmental aspects as the most important factors contributing to crash occurrence.The review fulfilled its objective,identifying the various approaches and the main research characteristics,limitations,and opportunities,and also highlighting the potential of the usage of ML in crash analyses.

Generalized Internal Model Robust Control for Active Front Steering Intervention

Because of the tire nonlinearity and vehicle＇s parameters＇uncertainties,robust control methods based on the worst cases,such as H_∞,μsynthesis,have been widely used in active front steering control,however,in order to guarantee the stability of active front steering system（AFS）controller,the robust control is at the cost of performance so that the robust controller is a little conservative and has low performance for AFS control.In this paper,a generalized internal model robust control（GIMC）that can overcome the contradiction between performance and stability is used in the AFS control.In GIMC,the Youla parameterization is used in an improved way.And GIMC controller includes two sections：a high performance controller designed for the nominal vehicle model and a robust controller compensating the vehicle parameters＇uncertainties and some external disturbances.Simulations of double lane change（DLC）maneuver and that of braking on split-μroad are conducted to compare the performance and stability of the GIMC control,the nominal performance PID controller and the H_∞controller.Simulation results show that the high nominal performance PID controller will be unstable under some extreme situations because of large vehicle＇s parameters variations,H_∞controller is conservative so that the performance is a little low,and only the GIMC controller overcomes the contradiction between performance and robustness,which can both ensure the stability of the AFS controller and guarantee the high performance of the AFS controller.Therefore,the GIMC method proposed for AFS can overcome some disadvantages of control methods used by current AFS system,that is,can solve the instability of PID or LQP control methods and the low performance of the standard H_∞controller.

Road model prediction based unstructured road detection

Vision-based road detection is an important research topic in different areas of computer vision such as the autonomous navigation of mobile robots.In outdoor unstructured environments such as villages and deserts,the roads are usually not well-paved and have variant colors or texture distributions.Traditional region- or edge-based approaches,however,are effective only in specific environments,and most of them have weak adaptability to varying road types and appearances.In this paper we describe a novel top-down based hybrid algorithm which properly combines both region and edge cues from the images.The main difference between our proposed algorithm and previous ones is that,before road detection,an off-line scene classifier is efficiently learned by both low- and high-level image cues to predict the unstructured road model.This scene classification can be considered a decision process which guides the selection of the optimal solution from region- or edge-based approaches to detect the road.Moreover,a temporal smoothing mechanism is incorporated,which further makes both model prediction and region classification more stable.Experimental results demonstrate that compared with traditional region- and edge-based algorithms,our algorithm is more robust in detecting the road areas with diverse road types and varying appearances in unstructured conditions.

An optimization model for improving highway safety

This paper developed a traffic safety management system （TSMS） for improving safety on county paved roads in Wyoming. TSMS is a strategic and systematic process to improve safety of roadway network. When funding is limited, it is important to identify the best combination of safety improvement projects to provide the most benefits to society in terms of crash reduction. The factors included in the proposed optimization model are annual safety budget, roadway inventory, roadway functional classification, historical crashes, safety improvement countermeasures, cost and crash reduction factors （CRFs） associated with safety improvement countermeasures, and average daily traffics （ADTs）. This paper demonstrated how the proposed model can identify the best combination of safety improvement projects to maximize the safety benefits in terms of reducing overall crash frequency. Although the proposed methodology was implemented on the county paved road network of Wyoming, it could be easily modified for potential implementation on the Wyoming state highway system. Other states can also benefit by implementing a similar program within their jurisdictions.

Influence of geometric design characteristics on safety under heterogeneous traffic flow

This paper focuses on analysing the influence of geometric design characteristics on traffic safety using bi-directional data on a divided roadway operated under heterogeneous traffic conditions in India. The study was carried out on a four lane divided inter-city highway in plain and rolling terrain. Statistical modelling approach by Poisson regression and Negative binomial regression were used to assess the safety performance as occurrence of crashes are random events and to identify the influence of the geometric design variables on the crash frequency. Negative binomial regression model was found to be more suitable to identify the variables contributing to road crashes. The study enabled better understanding of the factors related to road geometrics that influence road crash frequency. The study also established that operating speed has a significant contribution to the total number of crashes. Negative binomial models are found to be appropriate to predict road crashes on divided roadways under heterogeneous traffic conditions.