The detection of crack defects on the walls of road tunnels is a crucial step in the process of ensuring travel safetyand performing routine tunnel maintenance. The automatic and accurate detection of cracks on the su...The detection of crack defects on the walls of road tunnels is a crucial step in the process of ensuring travel safetyand performing routine tunnel maintenance. The automatic and accurate detection of cracks on the surface of roadtunnels is the key to improving the maintenance efficiency of road tunnels. Machine vision technology combinedwith a deep neural network model is an effective means to realize the localization and identification of crackdefects on the surface of road tunnels.We propose a complete set of automatic inspection methods for identifyingcracks on the walls of road tunnels as a solution to the problem of difficulty in identifying cracks during manualmaintenance. First, a set of equipment applied to the real-time acquisition of high-definition images of walls inroad tunnels is designed. Images of walls in road tunnels are acquired based on the designed equipment, whereimages containing crack defects are manually identified and selected. Subsequently, the training and validationsets used to construct the crack inspection model are obtained based on the acquired images, whereas the regionscontaining cracks and the pixels of the cracks are finely labeled. After that, a crack area sensing module is designedbased on the proposed you only look once version 7 model combined with coordinate attention mechanism (CAYOLOV7) network to locate the crack regions in the road tunnel surface images. Only subimages containingcracks are acquired and sent to the multiscale semantic segmentation module for extraction of the pixels to whichthe cracks belong based on the DeepLab V3+ network. The precision and recall of the crack region localizationon the surface of a road tunnel based on our proposed method are 82.4% and 93.8%, respectively. Moreover, themean intersection over union (MIoU) and pixel accuracy (PA) values for achieving pixel-level detection accuracyare 76.84% and 78.29%, respectively. The experimental results on the dataset show that our proposed two-stagedetection method outperforms other state-of-the-art models in crack region localization and detection. Based onour proposedmethod, the images captured on the surface of a road tunnel can complete crack detection at a speed often frames/second, and the detection accuracy can reach 0.25 mm, which meets the requirements for maintenanceof an actual project. The designed CA-YOLO V7 network enables precise localization of the area to which a crackbelongs in images acquired under different environmental and lighting conditions in road tunnels. The improvedDeepLab V3+ network based on lightweighting is able to extract crack morphology in a given region more quicklywhile maintaining segmentation accuracy. The established model combines defect localization and segmentationmodels for the first time, realizing pixel-level defect localization and extraction on the surface of road tunnelsin complex environments, and is capable of determining the actual size of cracks based on the physical coordinatesystemafter camera calibration. The trainedmodelhas highaccuracy andcanbe extendedandapplied to embeddedcomputing devices for the assessment and repair of damaged areas in different types of road tunnels.展开更多
Highway infrastructure plays a crucial role in the healthy development of the social economy.Therefore,China has invested a lot of financial resources in the construction of road and bridge projects in recent years,re...Highway infrastructure plays a crucial role in the healthy development of the social economy.Therefore,China has invested a lot of financial resources in the construction of road and bridge projects in recent years,resulting in the rise in scale and number of road and bridge projects.Simultaneously,the quality of road bridges has garnered widespread attention,necessitating an exploration of common hazards associated with road bridges and the significance of their reinforcement.It is essential to delve into specific technical methods to enhance the quality and service life of road bridges.This paper elaborates on the common hazards faced by road bridges and proposes maintenance and reinforcement strategies to promote the healthy development of road bridge engineering.展开更多
With the continuous development of China’s economy,the construction of roads and bridges work has put forward higher requirements.Due to various factors,the long-term use of roads and bridges will produce a settlemen...With the continuous development of China’s economy,the construction of roads and bridges work has put forward higher requirements.Due to various factors,the long-term use of roads and bridges will produce a settlement phenomenon.Therefore,it is crucial to address settlement issues during the construction of roads and bridges to ensure that the quality of subgrade and pavement construction meets national regulations.This paper introduces the harm of subgrade pavement subsidence,analyzes the causes of subgrade pavement deformation,and discusses the technical points of subgrade pavement construction,hoping to provide some reference for relevant practitioners.展开更多
With the development and progress of science and technology,road and bridge design has experienced rapid development,from the initial manual drawing design to the popularity of Computer-Aided Design(CAD),and then to t...With the development and progress of science and technology,road and bridge design has experienced rapid development,from the initial manual drawing design to the popularity of Computer-Aided Design(CAD),and then to today’s digital software design era.Early designers relied on hand-drawn paper design forms which was time-consuming and error-prone.Digital support for road and bridge design not only saves the design time but the design quality has also achieved a qualitative leap.This paper engages in the application of digital technology in road and bridge design,to provide technical reference for China’s road and bridge engineering design units,to promote the popularity of Civil3D and other advanced design software in the field of engineering design and development,ultimately contributing to the sustainable development of China’s road and bridge engineering.展开更多
This article analyzes the application strategies of shotcrete anchor support technology using a highway bridge-tunnel construction project as an example.The article covers various strategies,including support plan for...This article analyzes the application strategies of shotcrete anchor support technology using a highway bridge-tunnel construction project as an example.The article covers various strategies,including support plan formulation,mortar shotcrete anchor construction,grid steel frame construction,steel mesh construction,and concrete support construction.This analysis aims to provide a guideline for those interested in applying this technology and improving the quality and safety of highway bridges and tunnels construction.展开更多
Under the rapid development of socio-economy and urbanization,the state’s attention toward urban infrastructure continues to increase.The construction of municipal road and bridge projects is related to people’s dai...Under the rapid development of socio-economy and urbanization,the state’s attention toward urban infrastructure continues to increase.The construction of municipal road and bridge projects is related to people’s daily travel and transport safety,and it also plays an important role in promoting urban economic development.Therefore,modern technology should be fully utilized in the design of municipal roads and bridges to strengthen construction cost control and increase their social and economic benefits.In this paper,the characteristics and application status of BIM technology in municipal road and bridge design are analyzed,and corresponding road and bridge design strategies are explored to promote the healthy development of municipal road and bridge projects.展开更多
Engineering surveying is an important course for road and bridge engineering technology majors in higher vocational colleges.With the advancement of science and technology,engineering surveying technology is also cons...Engineering surveying is an important course for road and bridge engineering technology majors in higher vocational colleges.With the advancement of science and technology,engineering surveying technology is also constantly developing,so the theoretical knowledge and professional skills that students need to master are also becoming increasingly complicated.To stimulate the students’interest in learning the course,it is necessary to continuously introduce innovative teaching methods into the course.In this paper,the importance of teaching innovation in engineering surveying courses of road and bridge engineering technology majors in higher vocational colleges and the knowledge system that students need to master are analyzed.Subsequently,innovative strategies are proposed to help improve the students’mastery of engineering surveying.展开更多
Asphalt pavement is currently one of the main components in the construction of roads and bridges.However,from a practical point of view,various quality problems are prone to occur in the surface layer of asphalt pave...Asphalt pavement is currently one of the main components in the construction of roads and bridges.However,from a practical point of view,various quality problems are prone to occur in the surface layer of asphalt pavement,which will lead to the poor overall quality of road and bridge projects.Therefore,it should be applied reasonably.Advanced testing technologies are used to test the mixture quality,compaction,segregation,thickness,and other aspects of the asphalt pavement surface layer,so as to improve the quality of the asphalt pavement surface layer,and then improve the overall quality of road and bridge construction.Therefore,this paper mainly analyzes the technologies for asphalt pavement surface layer testing in road and bridge engineering construction.展开更多
In the process of construction of municipal roads and bridges,it is especially important for the construction of waterproof roadbed.If the leakage of waterproof foundation surface will inevitably lead to the impact of...In the process of construction of municipal roads and bridges,it is especially important for the construction of waterproof roadbed.If the leakage of waterproof foundation surface will inevitably lead to the impact of the quality of roads and bridges,not only the economic and social benefits of the enterprise be lost but also threaten the safety of pedestrians'lives and property.Therefore,this paper analyzes the influencing factors in the waterproof roadbed surface of municipal road bridge construction,and proposes corresponding solutions.展开更多
After some tragic fire events,Directive 2004/54/EC was issued to ensure a minimum safety level for tunnels belonging to the Trans-European Road Network longer than 500 m.Nowadays,most of the Italian road tunnels are s...After some tragic fire events,Directive 2004/54/EC was issued to ensure a minimum safety level for tunnels belonging to the Trans-European Road Network longer than 500 m.Nowadays,most of the Italian road tunnels are still not in compliance with the minimum safety requirements,thus refurbishment works are often planned.By developing a traffic macro-simulation model,this paper aims at assessing the resilience of an existing twin-tube motorway tunnel when one of its tubes is partially or completely closed due to planned activities.Several scenarios were investigated,also considering the availability or not of an alternative itinerary in the surrounding transportation network.The average vehicles’speed was used as a functionality parameter,while the resilience metrics were the resilience loss,the recovery speed,and the resilience index.The findings showed higher resilience losses for complete closure rather than partial closure of the tube under planned refurbishment works.The implementation of digital technologies,such as variable message signs,might reduce the resilience loss of the tunnel system.This research might represent a reference for tunnel management agencies in the choice of the most appropriate traffic control strategy to improve tunnel resilience in the event of planned activities.展开更多
The principle of “achieving shared growth through discussion and collaboration” is important for the “Belt and Road” initiative. Overseas China Cultural Centers serve as a window by introducing the historical stat...The principle of “achieving shared growth through discussion and collaboration” is important for the “Belt and Road” initiative. Overseas China Cultural Centers serve as a window by introducing the historical status and relevance of the “Belt and Road” in boosting cultural exchanges and trades and by promoting dialogue and integration among civilizations. The Silk Road spirit of “peaceful cooperation,openness and inclusiveness, m utual learning and mutual benefit” will prevail in the new historical period.展开更多
In recent years,China's social economy is in a period of rapid development which has also made great progress in the construction of roads and bridges.Roads and bridges as basic building facilities provides strong...In recent years,China's social economy is in a period of rapid development which has also made great progress in the construction of roads and bridges.Roads and bridges as basic building facilities provides strong support for local transportation and socioeconomic development in China.At this stage,roads and bridges are the basic guarantee for the development of the national economy,so great attention must be paid to the quality of their construction and engineering design.At present,the main factor affecting the quality of road bridges in China is the problem of bridge cracks.There are various reasons causes for cracks they must be controlled by effective measures to better improve the quality of road bridges.This article will discuss crack control in road bridge design and construction.展开更多
Road and bridge engineering is an indispensable part of socialist economic construction in China, whose construction quality significantly affects the infrastructure construction level in the whole society. To meet th...Road and bridge engineering is an indispensable part of socialist economic construction in China, whose construction quality significantly affects the infrastructure construction level in the whole society. To meet the rapid economic development of various regions, construction scale and quantity of road and bridge engineering have been continuously expanded and increased, therefore, higher requirements for construction quality and construction standard are also presented. During the construction of road and bridge engineering, concrete crack is a key problem which affects the construction quality. In this regard, this paper analyzes cause and prevention measures of concrete cracks during the construction of road and bridge engineering, and hopes to provide construction personnel with valuable references.展开更多
In recent years, the rapid growth of the number of private cars has greatly increased the traffic pressure, so the quality of roads and bridges should be further improved. The paper expounds the related matters of roa...In recent years, the rapid growth of the number of private cars has greatly increased the traffic pressure, so the quality of roads and bridges should be further improved. The paper expounds the related matters of road and bridge engineering from three aspects. Firstly, it expounds the construction principles of road and bridge engineering, which are regarded as the theoretical basis of follow-up research. Secondly, it analyzes the common diseases of road and bridge engineering, including bridgehead damage, rein-forcement corrosion, and subgrade uneven settlement, etc. Finally, it puts forward the construction treatment technology of road and bridge engineering on the basis of the construction principles and taking the common diseases as reference.展开更多
The main material of concrete is a construction building material composed of water and mineral mixture and cement and chemical additives in the corresponding proportion and below the standard.In the process of making...The main material of concrete is a construction building material composed of water and mineral mixture and cement and chemical additives in the corresponding proportion and below the standard.In the process of making concrete material,slurry and cement are needed to mix,then cement slurry and sand are mixed into mortar according to the corresponding proportion,and aggregate is added to mortar to form concrete building material.In the process of concrete preparation,the most important construction link is mixing,which needs to be fully stirred to make the performance of concrete meet the construction needs.In the process of concrete construction technology development,both mix ratio and production technology have become more and more mature,but there are still some problems,which have an impact on the quality of concrete[1].Therefore,this paper discusses the quality control of concrete raw materials according to the construction process of road and bridge.展开更多
With the acceleration of urbanization and the continuous improvement of urban infrastructure construction,roads and bridges,as an important infrastructure content in China,directly affect people's daily travel.The...With the acceleration of urbanization and the continuous improvement of urban infrastructure construction,roads and bridges,as an important infrastructure content in China,directly affect people's daily travel.Therefore,the construction and management of roads and bridges must be improved to ensure the quality and safety of roads and bridges and effectively prevent safety accidents.Strengthen the management of road and bridge construction through safety monitoring,improve the safety factor of the project and ensure people's travel safety.This paper mainly analyzes the common diseases and construction technology of road and bridge engineering construction,and puts forward safety monitoring measures.展开更多
The construction of municipal roads and bridges is an important foundation for the smooth traveling and transportation.However,if there a reduction in the subgrade and pavement part,the safety and the comfort of the d...The construction of municipal roads and bridges is an important foundation for the smooth traveling and transportation.However,if there a reduction in the subgrade and pavement part,the safety and the comfort of the driver will be seriously affected,therefore,reasonable measures should be taken on time to tackle the related issues.The significance of subgrade and pavement construction in the subsidence section,the key points of the construction,and the appropriate control measures that are should be taken in the actual construction,was discussed in this paper.Further,this paper analyzes the availability of the subgrade and pavement construction technology for the municipal roads and bridges,to provide a reference for engineers.展开更多
The October 1994 happened to be the 20th anniversary of scientific cooperation and academic exchange between the CAS and MPG. On the occasion, both sides would hold commemorative activities in Munich to celebrate this...The October 1994 happened to be the 20th anniversary of scientific cooperation and academic exchange between the CAS and MPG. On the occasion, both sides would hold commemorative activities in Munich to celebrate this collaborative partnership in a bid to review their past experiences and explore the possibilities of broadening their current joint endeavours as well as reveal their achieved cooperative results to the German public.展开更多
The analysis of the fluid characteristics downstream of a fire source in transportation tunnels is one the most important factor in the emergency response, evacuation, and the rescue service studies. Some crucial para...The analysis of the fluid characteristics downstream of a fire source in transportation tunnels is one the most important factor in the emergency response, evacuation, and the rescue service studies. Some crucial parameters can affect the fluid characteristics downstream of the fire. This research develops a statistical analysis on the computational fluid dynamics(CFD) data of the road tunnel fire simulations in order to quantify the significance of tunnel dimensions, inlet air velocity, heat release rate, and the physical fire size(fire perimeter) on the fluid characteristics downstream of the fire source. The selected characteristics of the fluid(response variables) were the average temperature, the average density, the average viscosity, and the average velocity. The prediction of the designed statistical models was assessed; then the significant parameters' effects and the parameters interactive effects on different response variables were determined individually. Next, the effect of computational domain length on the selection of the significant parameters downstream of the fire source was analyzed. In this statistical analysis, the linear models were found to provide the statistically good prediction. The effect of the fire perimeter and the parameters interactive effects on the selected response variables downstream of the fire, were found to be insignificant.展开更多
基金the Changsha Science and Technology Plan 2004081in part by the Science and Technology Program of Hunan Provincial Department of Transportation 202117in part by the Science and Technology Research and Development Program Project of the China Railway Group Limited 2021-Special-08.
文摘The detection of crack defects on the walls of road tunnels is a crucial step in the process of ensuring travel safetyand performing routine tunnel maintenance. The automatic and accurate detection of cracks on the surface of roadtunnels is the key to improving the maintenance efficiency of road tunnels. Machine vision technology combinedwith a deep neural network model is an effective means to realize the localization and identification of crackdefects on the surface of road tunnels.We propose a complete set of automatic inspection methods for identifyingcracks on the walls of road tunnels as a solution to the problem of difficulty in identifying cracks during manualmaintenance. First, a set of equipment applied to the real-time acquisition of high-definition images of walls inroad tunnels is designed. Images of walls in road tunnels are acquired based on the designed equipment, whereimages containing crack defects are manually identified and selected. Subsequently, the training and validationsets used to construct the crack inspection model are obtained based on the acquired images, whereas the regionscontaining cracks and the pixels of the cracks are finely labeled. After that, a crack area sensing module is designedbased on the proposed you only look once version 7 model combined with coordinate attention mechanism (CAYOLOV7) network to locate the crack regions in the road tunnel surface images. Only subimages containingcracks are acquired and sent to the multiscale semantic segmentation module for extraction of the pixels to whichthe cracks belong based on the DeepLab V3+ network. The precision and recall of the crack region localizationon the surface of a road tunnel based on our proposed method are 82.4% and 93.8%, respectively. Moreover, themean intersection over union (MIoU) and pixel accuracy (PA) values for achieving pixel-level detection accuracyare 76.84% and 78.29%, respectively. The experimental results on the dataset show that our proposed two-stagedetection method outperforms other state-of-the-art models in crack region localization and detection. Based onour proposedmethod, the images captured on the surface of a road tunnel can complete crack detection at a speed often frames/second, and the detection accuracy can reach 0.25 mm, which meets the requirements for maintenanceof an actual project. The designed CA-YOLO V7 network enables precise localization of the area to which a crackbelongs in images acquired under different environmental and lighting conditions in road tunnels. The improvedDeepLab V3+ network based on lightweighting is able to extract crack morphology in a given region more quicklywhile maintaining segmentation accuracy. The established model combines defect localization and segmentationmodels for the first time, realizing pixel-level defect localization and extraction on the surface of road tunnelsin complex environments, and is capable of determining the actual size of cracks based on the physical coordinatesystemafter camera calibration. The trainedmodelhas highaccuracy andcanbe extendedandapplied to embeddedcomputing devices for the assessment and repair of damaged areas in different types of road tunnels.
文摘Highway infrastructure plays a crucial role in the healthy development of the social economy.Therefore,China has invested a lot of financial resources in the construction of road and bridge projects in recent years,resulting in the rise in scale and number of road and bridge projects.Simultaneously,the quality of road bridges has garnered widespread attention,necessitating an exploration of common hazards associated with road bridges and the significance of their reinforcement.It is essential to delve into specific technical methods to enhance the quality and service life of road bridges.This paper elaborates on the common hazards faced by road bridges and proposes maintenance and reinforcement strategies to promote the healthy development of road bridge engineering.
文摘With the continuous development of China’s economy,the construction of roads and bridges work has put forward higher requirements.Due to various factors,the long-term use of roads and bridges will produce a settlement phenomenon.Therefore,it is crucial to address settlement issues during the construction of roads and bridges to ensure that the quality of subgrade and pavement construction meets national regulations.This paper introduces the harm of subgrade pavement subsidence,analyzes the causes of subgrade pavement deformation,and discusses the technical points of subgrade pavement construction,hoping to provide some reference for relevant practitioners.
文摘With the development and progress of science and technology,road and bridge design has experienced rapid development,from the initial manual drawing design to the popularity of Computer-Aided Design(CAD),and then to today’s digital software design era.Early designers relied on hand-drawn paper design forms which was time-consuming and error-prone.Digital support for road and bridge design not only saves the design time but the design quality has also achieved a qualitative leap.This paper engages in the application of digital technology in road and bridge design,to provide technical reference for China’s road and bridge engineering design units,to promote the popularity of Civil3D and other advanced design software in the field of engineering design and development,ultimately contributing to the sustainable development of China’s road and bridge engineering.
文摘This article analyzes the application strategies of shotcrete anchor support technology using a highway bridge-tunnel construction project as an example.The article covers various strategies,including support plan formulation,mortar shotcrete anchor construction,grid steel frame construction,steel mesh construction,and concrete support construction.This analysis aims to provide a guideline for those interested in applying this technology and improving the quality and safety of highway bridges and tunnels construction.
文摘Under the rapid development of socio-economy and urbanization,the state’s attention toward urban infrastructure continues to increase.The construction of municipal road and bridge projects is related to people’s daily travel and transport safety,and it also plays an important role in promoting urban economic development.Therefore,modern technology should be fully utilized in the design of municipal roads and bridges to strengthen construction cost control and increase their social and economic benefits.In this paper,the characteristics and application status of BIM technology in municipal road and bridge design are analyzed,and corresponding road and bridge design strategies are explored to promote the healthy development of municipal road and bridge projects.
文摘Engineering surveying is an important course for road and bridge engineering technology majors in higher vocational colleges.With the advancement of science and technology,engineering surveying technology is also constantly developing,so the theoretical knowledge and professional skills that students need to master are also becoming increasingly complicated.To stimulate the students’interest in learning the course,it is necessary to continuously introduce innovative teaching methods into the course.In this paper,the importance of teaching innovation in engineering surveying courses of road and bridge engineering technology majors in higher vocational colleges and the knowledge system that students need to master are analyzed.Subsequently,innovative strategies are proposed to help improve the students’mastery of engineering surveying.
文摘Asphalt pavement is currently one of the main components in the construction of roads and bridges.However,from a practical point of view,various quality problems are prone to occur in the surface layer of asphalt pavement,which will lead to the poor overall quality of road and bridge projects.Therefore,it should be applied reasonably.Advanced testing technologies are used to test the mixture quality,compaction,segregation,thickness,and other aspects of the asphalt pavement surface layer,so as to improve the quality of the asphalt pavement surface layer,and then improve the overall quality of road and bridge construction.Therefore,this paper mainly analyzes the technologies for asphalt pavement surface layer testing in road and bridge engineering construction.
文摘In the process of construction of municipal roads and bridges,it is especially important for the construction of waterproof roadbed.If the leakage of waterproof foundation surface will inevitably lead to the impact of the quality of roads and bridges,not only the economic and social benefits of the enterprise be lost but also threaten the safety of pedestrians'lives and property.Therefore,this paper analyzes the influencing factors in the waterproof roadbed surface of municipal road bridge construction,and proposes corresponding solutions.
文摘After some tragic fire events,Directive 2004/54/EC was issued to ensure a minimum safety level for tunnels belonging to the Trans-European Road Network longer than 500 m.Nowadays,most of the Italian road tunnels are still not in compliance with the minimum safety requirements,thus refurbishment works are often planned.By developing a traffic macro-simulation model,this paper aims at assessing the resilience of an existing twin-tube motorway tunnel when one of its tubes is partially or completely closed due to planned activities.Several scenarios were investigated,also considering the availability or not of an alternative itinerary in the surrounding transportation network.The average vehicles’speed was used as a functionality parameter,while the resilience metrics were the resilience loss,the recovery speed,and the resilience index.The findings showed higher resilience losses for complete closure rather than partial closure of the tube under planned refurbishment works.The implementation of digital technologies,such as variable message signs,might reduce the resilience loss of the tunnel system.This research might represent a reference for tunnel management agencies in the choice of the most appropriate traffic control strategy to improve tunnel resilience in the event of planned activities.
文摘The principle of “achieving shared growth through discussion and collaboration” is important for the “Belt and Road” initiative. Overseas China Cultural Centers serve as a window by introducing the historical status and relevance of the “Belt and Road” in boosting cultural exchanges and trades and by promoting dialogue and integration among civilizations. The Silk Road spirit of “peaceful cooperation,openness and inclusiveness, m utual learning and mutual benefit” will prevail in the new historical period.
文摘In recent years,China's social economy is in a period of rapid development which has also made great progress in the construction of roads and bridges.Roads and bridges as basic building facilities provides strong support for local transportation and socioeconomic development in China.At this stage,roads and bridges are the basic guarantee for the development of the national economy,so great attention must be paid to the quality of their construction and engineering design.At present,the main factor affecting the quality of road bridges in China is the problem of bridge cracks.There are various reasons causes for cracks they must be controlled by effective measures to better improve the quality of road bridges.This article will discuss crack control in road bridge design and construction.
文摘Road and bridge engineering is an indispensable part of socialist economic construction in China, whose construction quality significantly affects the infrastructure construction level in the whole society. To meet the rapid economic development of various regions, construction scale and quantity of road and bridge engineering have been continuously expanded and increased, therefore, higher requirements for construction quality and construction standard are also presented. During the construction of road and bridge engineering, concrete crack is a key problem which affects the construction quality. In this regard, this paper analyzes cause and prevention measures of concrete cracks during the construction of road and bridge engineering, and hopes to provide construction personnel with valuable references.
文摘In recent years, the rapid growth of the number of private cars has greatly increased the traffic pressure, so the quality of roads and bridges should be further improved. The paper expounds the related matters of road and bridge engineering from three aspects. Firstly, it expounds the construction principles of road and bridge engineering, which are regarded as the theoretical basis of follow-up research. Secondly, it analyzes the common diseases of road and bridge engineering, including bridgehead damage, rein-forcement corrosion, and subgrade uneven settlement, etc. Finally, it puts forward the construction treatment technology of road and bridge engineering on the basis of the construction principles and taking the common diseases as reference.
文摘The main material of concrete is a construction building material composed of water and mineral mixture and cement and chemical additives in the corresponding proportion and below the standard.In the process of making concrete material,slurry and cement are needed to mix,then cement slurry and sand are mixed into mortar according to the corresponding proportion,and aggregate is added to mortar to form concrete building material.In the process of concrete preparation,the most important construction link is mixing,which needs to be fully stirred to make the performance of concrete meet the construction needs.In the process of concrete construction technology development,both mix ratio and production technology have become more and more mature,but there are still some problems,which have an impact on the quality of concrete[1].Therefore,this paper discusses the quality control of concrete raw materials according to the construction process of road and bridge.
文摘With the acceleration of urbanization and the continuous improvement of urban infrastructure construction,roads and bridges,as an important infrastructure content in China,directly affect people's daily travel.Therefore,the construction and management of roads and bridges must be improved to ensure the quality and safety of roads and bridges and effectively prevent safety accidents.Strengthen the management of road and bridge construction through safety monitoring,improve the safety factor of the project and ensure people's travel safety.This paper mainly analyzes the common diseases and construction technology of road and bridge engineering construction,and puts forward safety monitoring measures.
文摘The construction of municipal roads and bridges is an important foundation for the smooth traveling and transportation.However,if there a reduction in the subgrade and pavement part,the safety and the comfort of the driver will be seriously affected,therefore,reasonable measures should be taken on time to tackle the related issues.The significance of subgrade and pavement construction in the subsidence section,the key points of the construction,and the appropriate control measures that are should be taken in the actual construction,was discussed in this paper.Further,this paper analyzes the availability of the subgrade and pavement construction technology for the municipal roads and bridges,to provide a reference for engineers.
文摘The October 1994 happened to be the 20th anniversary of scientific cooperation and academic exchange between the CAS and MPG. On the occasion, both sides would hold commemorative activities in Munich to celebrate this collaborative partnership in a bid to review their past experiences and explore the possibilities of broadening their current joint endeavours as well as reveal their achieved cooperative results to the German public.
文摘The analysis of the fluid characteristics downstream of a fire source in transportation tunnels is one the most important factor in the emergency response, evacuation, and the rescue service studies. Some crucial parameters can affect the fluid characteristics downstream of the fire. This research develops a statistical analysis on the computational fluid dynamics(CFD) data of the road tunnel fire simulations in order to quantify the significance of tunnel dimensions, inlet air velocity, heat release rate, and the physical fire size(fire perimeter) on the fluid characteristics downstream of the fire source. The selected characteristics of the fluid(response variables) were the average temperature, the average density, the average viscosity, and the average velocity. The prediction of the designed statistical models was assessed; then the significant parameters' effects and the parameters interactive effects on different response variables were determined individually. Next, the effect of computational domain length on the selection of the significant parameters downstream of the fire source was analyzed. In this statistical analysis, the linear models were found to provide the statistically good prediction. The effect of the fire perimeter and the parameters interactive effects on the selected response variables downstream of the fire, were found to be insignificant.