Mechanical properties and failure characteristics of fractured sandstone with grouting and anchorage

Based on uniaxial compression experimental results on fractured sandstone with grouting and anchorage, we studied the strength and deformation properties, the failure model, crack formation and evolution laws of fractured sandstone under different conditions of anchorage. The experimental results show that the strength and elastic modulus of fractured sandstone with different fracture angles are significantly lower than those of intact sandstone. Compared with the fractured samples without anchorage,the peak strength, residual strength, peak and ultimate axial strain of fractured sandstone under different anchorage increase by 64.5–320.0%, 62.8–493.0%, and 31.6–181.4%, respectively. The number of bolts and degree of pre-stress has certain effects on the peak strength and failure model of fractured sandstone. The peak strength of fractured sandstone under different anchorage increases to some extent, and the failure model of fractured sandstone also transforms from tensile failure to tensile–shear mixed failure with the number of bolts. The pre-stress can restrain the formation and evolution process of tensile cracks, delay the failure process of fractured sandstone under anchorage and impel the transformation of failure model from brittle failure to plastic failure.

Theoretical analysis of a new segmented anchoring style in weakly cemented soft surrounding rock

According to the tensile failure of rock bolt in weakly cemented soft rock, this paper presents a new segmented anchoring style in order to weaken the cumulative effect of anchoring force associated with the large deformation. Firstly, a segmented mechanical model was established in which free and anchoring section of rock bolt were respectively arranged in different deformation zones. Then, stress and displacement in elastic non-anchoring zone, elastic anchoring zone, elastic sticking zone, softening sticking zone and broken zone were derived respectively based on neural theory and tri-linear strain softening constitutive model of soft rock. Results show that the anchoring effect can be characterized by a supporting parameter b. With its increase, the peak value of tangential stress gradually moves to the roadway wall, and the radial stress significantly increases, which means the decrease of equivalent plastic zone and improvement of confining effect provided by anchorage body. When b increases to 0.72, the equivalent plastic zone disappears, and stresses tend to be the elastic solutions. In addition, the anchoring effect on the displacement of surrounding rock can be quantified by a normalization factor δ.