Numerical analysis of seepage flow characteristic of collapse column under the influence of mining

Based on the importance of fractured rock mass seepage research, in order to analyze seepage flow characteristics of collapse column under the influence of mining, a method by embedding fractured rock mass flow solid coupling relationship into FLAC3D internal flow models is presented according to fluid-solid coupling theory and strength criterion. A calculation model of numerical analysis was established, and the influences of mining pressure and plastic damage to pore water pressure and seepage vector change rule were studied. The results show that collapse column is the main channel of confined water seepage upward. The impact is not big when the workface is away from the collapse column. But when the workface is nearing a collapse column, there will be a seepage channel on a side near the workface, in which seepage vector and head are comparatively large. With workface pushing through collapse column, the seepage channel transfers to the other side of the column. In addition, when the plastic damage area within the collapse column breaks through, a "pipeline flow" will be formed within the column, and seepage field will change remarkably and the possibility of water bursting will be greater.

Mechanical properties and failure characteristics of fractured sandstone with grouting and anchorage

Based on uniaxial compression experimental results on fractured sandstone with grouting and anchorage, we studied the strength and deformation properties, the failure model, crack formation and evolution laws of fractured sandstone under different conditions of anchorage. The experimental results show that the strength and elastic modulus of fractured sandstone with different fracture angles are significantly lower than those of intact sandstone. Compared with the fractured samples without anchorage,the peak strength, residual strength, peak and ultimate axial strain of fractured sandstone under different anchorage increase by 64.5–320.0%, 62.8–493.0%, and 31.6–181.4%, respectively. The number of bolts and degree of pre-stress has certain effects on the peak strength and failure model of fractured sandstone. The peak strength of fractured sandstone under different anchorage increases to some extent, and the failure model of fractured sandstone also transforms from tensile failure to tensile–shear mixed failure with the number of bolts. The pre-stress can restrain the formation and evolution process of tensile cracks, delay the failure process of fractured sandstone under anchorage and impel the transformation of failure model from brittle failure to plastic failure.