The Characteristics of Ore-Controlling Structure in Baoshan Cu-Pb-Zn Polymetallic Deposit,Hunan Province

The Baoshan Cu-Pb-Zn polymetallic deposit is lied in the central Nanling mineralization zone,and belongs to the junction area of the Chenzhou-Linwu fault zone and the Leiyang-Linwu fault zone.It is a significant part of Nanling polymetallic deposit belt.The outcropping stratas consist of upper Devonian Shetianqiao,Xikuangshan Formation,Lower Carboniferous Menggong’ao,Shidengzi,Ceshui,and Zimenqiao Formation.Igneous rocks in the Baoshan ore area mainly comprise granodiorite porphyry.Furthermore,the radio isotopic age ranges from 123 Ma to 183 Ma,belonging to the early to middle Yanshanian.

Analysis of Ore-controlling Structure in the Qifengcha-Detiangou Gold Deposit,Huairou County,Beijing

The Qifengcha-Detiangou gold deposit is a medium-sized deposit recently found in Huairou County, Beijing. It belongs to the altered mylonite type with superimposed quartz vein type and is related to the early Yanshanian magmatic activity. Characterized by multiperiodic activity, the NE-trending Qifengcha fault is a regional ore-controlling structure in the area, and gold mineralization develops only in its southeastern part. Meanwhile, gold mineralization is controlled by the Yunmengshan metamorphic core complex. The nearly N-S- and E-W-trending low-angle detachment faults, reformed by the Qifengcha fault in the northwestern part of the core complex, are the main ore-bearing faults. All discovered gold deposits are located within an area 1.5–4.0 km away from the boundary of the upwelling centre. The N-S- (NNE-) and E-W-trending ore-bearing faults are ductile-brittle structural zones developing in shallow positions and subjected mainly to compressive deformation. The structural ore-controlling effects are as follows. (1) The attitude, shape, and distribution of gold orebodies are controlled by faults. (2) There is a negative correlation between the gold abundance and the magnetic anisotropy (P) of the altered mylonite samples from the deposit, which shows that the gold mineralization is later than the structural deformation. (3) Quartz vein type mineralization is superimposed on altered mylonite type mineralization. (4) In mineralized mylonite, the stronger the ductile shear deformation, the easier the late-stage gold mineralization to occur and the higher the gold abundance. The richest gold mineralization occurs only around the centre of the fault subjected to the strongest deformation.

Analysis of Ore-Controlling Structures of the Xincheng-Hexi Gold Deposit,Shandong Province,China

Based on quantitative and semi-quantitative mathematical and mechanical analysis of the shape, motion, structural factors, stress field and deformation field of the ore-hosting faults in the Xincheng-Hexi gold deposit, the ore-controlling features of faults and mineralization mechanism are discussed. It is concluded that the mineralization is controlled by the main faults, subsidiary fractures, joint density, mechanical features and deformation of the faults. The ore bodies are mainly located in the lower part of the convex crest and upper part of the concave trough of the main undulating fault surface. Mineralization is positively correlated to the development of subsidiary fractures and joints, which correspond to zones of low internal stress and high body strain and shear strain. They are favourable positions for mineralization and alteration.

Ore-controlling Regularities of Thrust-fold structures and features of Tectono-geochemical Anomalies at the Xiaozhuqing Exploration Area in the Huize Zn-Pb District

1 Introduction The huize Zn-Pb ore district in Yunnan province is locatedinthecentralsouthernofthe Sichuan—Yunnan—GuizhouPb-ZnPoly-metallic Mineralization Area in the southwestern margin of the Yangtze Block,and is strictly controlled by fault structures.It has developed to one of the famous production bases of lead&zinc and germanium in China.

GEOCHEMICAL REASERCH ON ORE-CONTROLLING STRUCTURE IN LIAODONG LUOQUANBEI-BAIYUN GOLD MINERAL BELT

In recent2 0 years,because of the finding ofmany large- superlargegold deposits,we re- new the theories for prospecting and gain many things and conceptions.The current geo- chemical and gold- forming theories underline the importance of the early submarine volcano- sedimentation,metamorphic differention,sedimentation of terrigenous clastics,thermal spring and it’s sedimentation,syngenesis process and other hypergene supplying the source for metallogenic materials.According to the study for source bed(rock) and depsitional for- mation of gold,we find that gold will be gradually enriched and mineralized in source bed (rock) ,because of variousgeologicprocesses,such as regional metamorphism ormigmatiza- tion,geothermal bittern,volcanism. The ore- control of deep and giant fault and ductile shear beltand tectono- flash space is emphasized,especially,we should notice the long- term, succession and multistage of the

Mineralization and Ore-controlling Implications of Low-angle Faults

Abstract Low-angle faults include those occurring in thrust-nappe structures in a compressive setting and the detachment of metamorphic core complexes in an extensional setting. All low-angle faults have their own particularities. The low-angle fault plays an important role in controlling over some endogenetic metallic ore deposits. Based on studies of the Xiaoban gold deposit, Xinzhou gold deposit, and Longfengchang polymetallic ore deposit, and comparisons with other mines, the authors conclude the ore-controlling implications of low-angle faults as follows. (1) Because of high temperature and high pressure, as well as strong ductile deformation, the internal energy of the elements rises in the large-scale deep ductile low-angle faults, which causes the elements to activate and differentiate from the source rocks, forming ore-bearing hydrothermal solution, and bring mineralization to happen. (2) When rising from depths and flowing along the low-angle faults, the ore-bearing hydrothermal solution will alter and replace the tectonites in the fault zone. The rocks of the hanging side and the heading side differ in lithology, texture and structure, which results in changes or dissimilarities of the physical-chemical conditions. This destroys the balance of the hydrothermal solution system and causes the dissolved ore-forming elements to precipitate; as a result, a deposit is formed. Therefore, the meso-shallow ductile-brittle low-angle faults play the role of a geochemical interface in the process of mineralization. (3) Low-angle faults are often one of the important host structures.

The Formation of the Jiaodong Gold Province

Gold deposits in Jiaodong,termed Jiaodong-type,are tectonically located in the southeastern margin of the North China Craton.Their major features are reviewed in this paper to highlight the differences between Jiaodong deposits and other genetic types of gold deposits.The mineralization was synchronized with asthenosphere upwelling indicated by synore OIB-like mafic dike and large-scale crustal thinning suggested by decrease of Sr/Y from pre-ore to syn-ore granites.Asthenosphere upwelling induced by the roll-back of Paleo-Pacific Plate drove partial melting of lithospheric mantle and devolatilization,which induced the release of the ore-forming fluids.In concomitant with magmatic records,mineralization migrated from the western Jiaobei terrane(133–127 Ma)to the eastern Sulu orogenic belt(114–108 Ma),corresponding to the eastward roll-back of Paleo-Pacific Plate.Gold mineralization in Jiaodong formed in the transitions of ductile to brittle deformation,rapid to slow crustal uplift,and regional compression to extension.In the regional-scale,the gold deposits in the Jiaobei terrane are mostly situated at intersections between NE-trending faults and EW-trending basement faults,and gold orebodies dominantly controlled by the lithologic contacts between Precambrian metamorphic rocks and Mesozoic granites.The mineralization was dominated by the disseminated-veinlet ores related to quartz–sericite alteration in strong cataclasite-breccia zone,with subsidiary thick quartz-sulfide veins developed in secondary fault zones.The ore-forming fluids belong to a H_(2)O–CO_(2)–NaCl±CH_(4)system and show minor variations in salinity among different types of ore.Structure-fluid feedback involving fluid-rock reaction and hydrofracturing triggered the fluid phase separation and resultant gold deposition.The Jiaodong gold deposits are distinct from orogenic and intrusion-related gold deposits in terms of tectonic setting,origin of ore-forming fluids,and mechanism of gold deposition.

Study on the Metallogenetism of Sub-mantle Plume and Mantle Branches in the Gold Mineralization Concentration Area of Northwest Jiaodong Peninsula

The northwest of Jiaodong peninsula is characterized by its greatest gold concentration area, enormous gold reserves and limited time interval （115±5Ma） of gold mineralization in China. Studies show that the east area of north China began its mantle plume evolution since the Yanshanian movement, and the Laiyang sub-mantle plume and its surrounding mantle branches such as those in Guojiadian, Aishan and Panshidian were formed in the mineralization concentration area of northwestern Jiaodong peninsula. With the development of mantle plume →sub-mantle plume → mantle branch→ favorable expending structures, the deep-derived hydrothermal fluid moved up to the favorable places, such as brittle-ductile or ductile-brittle shearing zones, the internal and external contact zones of intrusions, dense fracturing zones and the contact zones between dikes and countryrocks, and concentrated into deposits. Then the gold mineralization concentration zones that are centralized on mantle branches were formed. This study takes Guojiadian mantle branch as an example to discuss their metallogenetism and conclude the metallogenetic mode.

STUDY ON TECTONIC FEATURE AND METALLOGENIC MECHANISM OF THE PENGSHAN Sn-Pb-Zn POLYMETALLIC OREFIELD, JIANGXI PROVINCE

The Pengshan Sn-Pb-Zn polymetallic orefield is located in the Jiujiang-Ruichang region, which is a segment of the middle-lower Yangtze River metallogenic belt. The Pengshan late Yanshanian buried pluton with granitic composition is a calc-alkaline pluton, intrusion of which is responsible for the formation of the Sn-Pb-Zn polymetallic deposit through providing thermodynamic condition and ore-forming material. The long-active basement rifts initially formed in the Jinning period and the domal structure with induced secondary order faults formed by emplacement of the pluton, such as ring-detachment fault, top-detachment fault and joint fissure, act as the passage-way for magma and ore-forming fluid and impounding structure for ore deposit. The magma to form the pluton with DI>90 is intensively differentiated. The variation of the ore-forming fluid in composition with falling in temperature caused by action of magmatic hydrothermal convection system combined with groundwater convection system attributes to mineralization of various types in the orefield. The mineralization process can be divided into six stages, i.e., greisenization, skarnization of early stage, fluorite-stanniferous silication stage, skarnization of advanced stage, quartz and cassiterite-sulfuration stage and carbonation stage. The mineral assemblages formed in different mineralization stages are different owing to temperature changing and may be overlapped in space. Malayaite is recognized from the mineral assemblage formed in the fluorite-stanniferous silication stage. The ores in the Pengshan Sn-Pb-Zn polymetallic deposit are spatially zoned with variation from As-Sn mineral assemblage of high temperature in the inner zone through Sn-Pb and Pb-Zn-Ag mineral assemblage of middle temperature in the middle zone to fluorite mineral assemblage of low temperature in the outer zone. The exchanging of Sn, Mg and Fe between biotite and hydrothermal fluid resulted from variation of physicochemical condition during evolution processes of the hydrothermal fluid and its role in mineralization are also discussed in this paper.

Structural Networks Constraints on Alteration and Mineralization Processes in the Jiaojia Gold Deposit, Jiaodong Peninsula, China

Structural network studies could give appropriate opportunities to understanding structural/hydrothermal events,transportation of ore-forming fluids and water/rock interaction process.Four structural deformation/hydrothermal events have been identified in the Jiaojia fault zone according to microtexture and deformation of quartz and feldspars.Plagioclase experienced ductile deformation period with bended polysynthetic twin stripes(>450℃)in the early stage,followed by K-feldspar alteration period with ductile-brittle deformation and subgrain rotation recrystallization of quartz(380-450℃).Then,sericitization period occurred extensive ductile-brittle deformation(350-420℃)and extensive subgrain rotation recrystallization with a little bulging recrystallization in quartz.In the last,gold precipitation-related pyrite-sericite-quartz alteration was dominated by brittle deformation(300-380℃)and total bulging recrystallization of quartz.From the K-feldspar alteration zone and sericitization zone to pyrite-sericitequartz alteration zone,fractal dimension values of dynamically recrystallized quartz grains increase from 1.07 and 1.24 to 1.32,the calculated paleo strain rate values of dynamically recrystallized quartz range from 10^-10^.7(380℃)-10^-9.6(450℃)and 10^-9.3(350℃)-10^-8.2(420℃)to 10^-9.5(300℃)-10^-8.0(380℃),and the paleo differential stress values increase from 36.9 and 39.3,to 121.3 MPa.The increase of fractal dimension values and decrease of grain size from pyrite-sericite-quartz alteration zone and sericitization zone to K-feldspar alteration zone decreased average water/rock ratio values,which could lead to different acidity and redox conditions of ore-forming fluids and mineralization differences.Two kinds of orecontrolling fractures have been distinguished which include the gentle dip types(18°-50°)with NW(315°-355°)and SW(180°-235°)dip hosting No.Ⅰorebodies and the steep dip types(74°-90°)with NE(45°-85°)and SE(95°-165°)dip hosting No.Ⅲorebodies.These faults/fractures crosscut altered Linglong granite of footwall of the Jiaojia fault zone as rhombohedrons that promoted the connection between fractures in the K-feldspar alteration zone and fluid flow passages near the main fault face.Research results indicate No.Ⅰand No.Ⅲorebodies should be derived from the same mineralization event and belong to different orebody types in different mineralization sites under the same structural networks.