Research and Development Trend of Shape Control for Cold Rolling Strip

Shape is an important quality index of cold rolling strip. Up to now, many problems in the shape control domain have not been solved satisfactorily, and a review on the research progress in the shape control domain can help to seek new breakthrough directions. In the past 10 years, researches and applications of shape control models, shape control means, shape detection technology, and shape con- trol system have achieved significant progress. In the aspect of shape control models, the researches in the past improve the accuracy, speed and robustness of the models. The intelligentization of shape control models should be strengthened in the future. In the aspect of the shape control means, the researches in the past focus on the roll opti- mization, mill type selection, process optimization, local strip shape control, edge drop control, and so on. In the future, more attention should be paid to the coordination control of both strip shape and other quality indexes, and the refinement of control objective should be strengthened. In the aspects of shape detection technology and shape control system, some new types of shape detection meters and shape control systems are developed and have successfully indus- trial applications. In the future, the standardization of shape detection technology and shape control system should be promoted to solve the problem of compatibility. In general,the four expected development trends of shape control for cold roiling strip in the future are intelligentization, coordi- nation, refinement, and standardization. The proposed research provides new breakthrough directions for improv- ing shape quality.

EVALUATION OF LUBRICANTS FOR COLD ROLLING ALUMINUM STRIPS

Various kinds of base oils were applied to cold rolling aluminum strips on a test mill for evaluationof the influences of these base oils,aromatics contents and viscosity of base oils on their lubricating performances and surface reflectivity of rolled strips at annealing. Results showed that low friction coefficient androlling force were obtained by using the normal paraffins,whereas their contaminations on the annealed stripsurface were the same as those of other saturated hydrocarbons. Aromatics in base oil affected the stir face reflectivity of annealed strips, but the decrease of aromatics in base oil was ineffective to improve rolled stripssurface quality when it is less than 1 %. Base oil viscosity has the great influences on the lubricating performances and surface reflectivity of annealed strips just in this condition.

MENDED GENETIC BP NETWORK AND APPLICATION TO ROLLING FORCE PREDICTION OF 4-STAND TANDEM COLD STRIP MILL

In order to make good use of the ability to approach any function of BP (backpropagation) network and overcome its local astringency, and also make good use of the overallsearch ability of GA (genetic algorithms), a proposal to regulate the network's weights using bothGA and BP algorithms is suggested. An integrated network system of MGA (mended genetic algorithms)and BP algorithms has been established. The MGA-BP network's functions consist of optimizing GAperformance parameters, the network's structural parameters, performance parameters, and regulatingthe network's weights using both GA and BP algorithms. Rolling forces of 4-stand tandem cold stripmill are predicted by the MGA-BP network, and good results are obtained.

Study on Tribological Properties of the Rolling Fluid Containing Nano-MoS_2 for Cold Rolling of Steel Strip

The nano-MoS2 particles were adopted to substitute for the extreme-pressure and anti-wear additives to the rolling fluid for steel strips.An optimal formulation and technical process for adding nano-MoS2 particles to the rolling fluid were obtained through orthogonal experiments with three factors at three levels.The tests have led to the following conclusions:(a) the nanoparticles should be added to a base oil with high saponification value;(b) the concentration of nanoparticles in rolling fluid should be equal to 0.6%;and (c) when the reaction time needed for surfactants (oleic acid,for example) to modify the nanoparticles was 40 min,the rolling fluid could have the best tribological properties.The lubricity of rolling fluid was verified by using a 4-high cold rolling test mill which showed that the rolling fluid with nano-MoS2 particles had the excellent lubricant performance to improve the surface quality of the steel strip remarkably.The mechanism of nano-MoS2 particles in the rolling process has been investigated by a series of characterization instruments,which have showed that,with its fullerene-like structure,the nano-MoS2 particles have self-lubricating properties and extra-low friction coefficient,and can easily form a protective film with low shear strength on the surface of friction pairs.

Research on Lubrication Behaviors and Mechanism of Nano-Copper Used in Emulsions for Strip Cold Rolling

In this paper,nano-Cu particles with an average size of smaller than 20 nm were dispersed under ultrasonic agitation in emulsions for cold rolling of steel strips.The tribological properties of the cold rolling emulsion doped with nano-Cu particles were evaluated by using a four-ball machine,and the worn surfaces of the steel balls were checked by an optical microscope.A JC2000C1 wetting angle tester was also applied to study the variation in the emulsion's wetting performance when nano-Cu particles were incorporated.Furthermore,the lubricity of the emulsion doped with nano-Cu for steel strip cold rolling was evaluated on a four-high rolling mill for comparison with the emulsion without using nano-Cu particles.Test results indicated that nano-Cu particles as the additive used in cold rolling emulsion were able to improve the wetting property,friction-reducing,anti-wear,and extreme pressure performance of the base stock significantly.At the same time,nano-Cu particles also showed good lubricity to the cold-rolled steel strips.Namely,the cold-rolled steel strips under the lubrication of the cold rolling emulsion containing nano-Cu particles had considerably decreased the after-rolling thickness and achieved excellent surface quality as well.Finally,the lubrication mechanism of nano-Cu particles in the emulsion for cold rolling of steel strips was discussed.

Neural Network Friction Model for Cold Strip Rolling

A neural network friction model with very good prediction accuracy was developed on the basis of industrial data. Simulative calculation indicated that the accuracy of rolling force and motor power calculation can be improved using the calculated friction coefficient. It was found that reduction ratio and deformation resistance of strip has more effects than other parameters, and the effects of most parameters are affected by rolling speed.

STUDY ON STRIP AND ROLL DEFORMATION COUPLING OF COLD STRIP ROLLING ON 4-H MILL

The cold strip rolling process on a 4 h mill is studied by coupling the 3 dimensional plasticity deformation of the strip with the elastic deformation of the rolls. On the conditions of that the width to thickness ratio of the strip is 660 and the exit strip shapes are respectively edge wave, centre wave and good, the computed results of the transverse distributions of the roll gap, the rolling pressure, the inter roll pressure, and the front and back tension agree with the experimental results well. The studing methods and the studied results are of great importance to forming shape theory and guiding the development of shape control technology.

FEM Analysis of Rolling Pressure Along Strip Width in Cold Rolling Process

Using 3-D elastic-plastic FEM, the cold strip rolling process in a 4-high mill was simulated. The elastic deformation of rolls, the plastic deformation of the strip, and the pressure between the work roll and the backup roll were taken into account. The distribution of rolling pressure along the strip width was obtained. Based on the simulation results, the peak value of rolling pressure and the location of the peak were analyzed under different rolling conditions. The effects of the roll bending force and the strip width on the distribution of rolling pressure along the width direction were determined.

Dynamic characteristics of cold rolling mill and strip based on flatness and thickness control in rolling process

The dynamic model of cold rolling mill based on strip flatness and thickness integrated control was proposed,containing the following sub-models:the rolling process model,the dynamic model of rolls along axial direction,and the compensation model.Based on the rule of volume flow rate,the dynamic rolling process model was built.The work roll and backup roll were taken as elastic continuous bodies,the effect of shear and moment of inertia were taken into consideration,and then the dynamic model of rolls was built.The two models were coupled together,and the dynamic model of rolling mill was built.In the dynamic model,the thermal expansion of the rolls,the wear of the rolls and other related parameters can not be considered.In order to compensate the dynamic model,the coupled static model of rolls and strip was applied.Then,according to the inner relationship of these models,the dynamic model and the compensation model were coupled,and the dynamic model of rolling mill based on the strip flatness and thickness integrated control was built.The dynamic simulation of the rolling process was made,and the dynamic thickness and the dynamic flatness information were obtained.This model not only provides a theory basis for the virtual rolling,but also provides a platform for the application of advanced control theory.

Preset model of bending force for 6-high reversing cold rolling mill based on genetic algorithm

The hydraulic roll-bending device was studied, which was widely used in modem cold rolling mills to regulate the strip flatness. The loaded roll gap crown mathematic model and the strip crown mathematic model of the reversing cold rolling process were established, and the deformation model of roll stack system of the 6-high 1 250 mm high crown （HC） reversing cold rolling mill was built by slit beam method. The simulation results show that, the quadratic component of strip crown decreases nearly linearly with the increase of the work roll bending force, when the shifting value of intermediate roll is determined by the rolling process. From the first pass to the fifth pass of reversing rolling process, the crown controllability of bending force is gradually weakened. Base on analyzing the relationship among the main factors associated with roll-bending force in reversing multi-pass rolling, such as strip width and rolling force, a preset mathematic model of bending force is developed by genetic algorithm. The simulation data demonstrate that the relative deviation of flatness criterions in each rolling pass is improved significantly and the mean relative deviation of all five passes is decreased from 25.1% to 1.7%. The model can keep good shape in multi-pass reversing cold rolling process with the high prediction accuracy and can be used to guide the production process.

Industrial shape detecting system of cold rolling strip

A high-precision shape detecting system of cold rolling strip is developed to meet industrial application, which mainly consists of the shape detecting roller, the collecting ring, the digital signal processing （DSP） shape signal processing board and the shape control model. Based on the shape detecting principle, the shape detecting roller is designed with a new integral structure for improving the precision of shape detecting and avoiding scratching strip surface. Based on the DSP technology, the DSP shape signal processing circuit board is designed and embedded in the shape detecting system for the reliability and stability of shape signal processing. The shape detecting system was successfully used in Angang 1 250 mm HC 6-high reversible cold rolling mill. The precision of shape detecting is 0.2 I and the shape deviation is controlled within 6 1 after the close loop shape control is input.

Transverse Distributions of Front and Back Tension Stresses in Cold Strip Rolling

In this paper,such a new lateral displacement function is proposed that the lateral flow velocity is con- tinuous at the entry and the exit of deformation zone.A new kind of finite strip method—the third power B-spline finite strip method—is put forward to simulate strip rolling process.Front and back tension stresses are formulated.The computed results of the transverse distributions of the front and back tension stresses are close to the experimental results.The paper lays a foundation for further analysing the three-dimensional stresses and deformations of strip rolling.

Surface Inspection System for Cold Rolled Strips Based on Image ProcessingTechnique

A new surface inspection system for cold rolled strips based on image processing is introduced. The system is equipped withtwo different illumination structures and CCD matrix cameras. The structure and image processing of the inspection system are described. Some efficient algorithms for image processing and classification are presented. The system is tested with strip samples fromcold rolling plants. The results show that the system can detect and recognize six common defects of cold rolled strips successfully.

Analysis of the cause of crack in cold rolling of QSn6.5-0.1 strip

In order to know the cause of cracks in cold rolling of QSn6.5 0.1 copper alloy strip, a lot of experiments and analysis were done. The microstructure changes of QSn6.5 0.1 were investigated by means of metallurgical microscope. The morphology of cracks and surface defects were examined using scanning electron microscope. Macroscopic residual stresses produced in every process during manufacturing in the QSn6.5 0.1 strip were measured by X ray diffraction method and hole drilling method. The results show that the cracks in the QSn6.5 0.1 cold rolling strip were caused due to the derivation of metallurgical defects, such as SnO 2, S, fine looses,the inverse segregation unable to clear up when milling, and the accumulation of all kinds of resi dual stresses. When the accumulation of the residual stress reaches the material′s breaking strength, the cracks will be generated. Several measures to avoid the development of these kinds of cracks were put forward, such as: controlling the casting technology, improving homogenization annealing procedure (680 ℃/7 h) and milling quality(using the second milling when necessary), working out a more reasonable rolling technology to ensure intermediate annealing in time.

Physiological and genome-wide gene expression analyses of cold-induced leaf rolling at the seedling stage in rice(Oryza sativa L.)

Leaf rolling and discoloration are two chilling-injury symptoms that are widely used as indicators for the evaluation of cold tolerance at the seedling stage in rice. However, the difference in cold-response mechanisms underlying these two traits remains unknown. In the present study, a cold-tolerant rice cultivar, Lijiangxintuanheigu, and a cold-sensitive cultivar, Sanhuangzhan-2, were subjected to low-temperature treatments and physiolog-ical and genome-wide gene expression analyses were conducted. Leaf rolling occurred at temperatures lower than 11℃, whereas discoloration appeared at moderately low temperatures such as 13℃. Chlorophyll contents in both cultivars were significantly decreased at 13℃, but not altered at 11℃. In contrast, the relative water content and relative electrolyte leakage of both cultivars decreased significantly at 11℃, but did not change at 13℃. Expression of genes associated with calcium signaling and abscisic acid (ABA) degradation was significantly altered at 11℃ in comparison with 25℃ and 13℃. Numerous genes in the DREB, MYB, bZIP, NAC, Zinc finger, bHLH, and WRKY gene families were differentially expressed. Many aquaporin genes and the key genes in trehalose and starch synthesis were down regulated at 11℃ in comparison with 25℃ and 13℃. These results suggest that the two chilling injury symptoms are temperature-specific and are controlled by different mechanisms. Cold-induced leaf rolling is associated with calcium and ABA signaling pathways and is regulated by multiple transcriptional regulators. The suppression of aquaporin genes and reduced accumulation of soluble sugars under cold stress results in a reduction in cellular water potential and consequently leaf rolling.

Determination of Optimal Work Roll Profile for Cold Strip Mill

The model of predicting distribution of strip thickness at the exit and tension stress is established by using weighted residual method and variational method with consideration of rolled metal lateral flow.A New method of calculating loaded roll gap in relation to target tension stress is proposed.The minimum square summation of loaded roll gap deviation is used as an objective function for the first time to optimize initial work roll profile.

Strip shape control capability of hot wide strip rolling mills

The elasticity deformation of rolls was analyzed by means of two-dimensional finite element method （FEM） with variable thickness. Three typical mills were used as objects for analysis. A thorough study was done on the control capabilities of these mills on the strip shape. Then the strip shape control capabilities of the three mills was compared synthetically. 2008 University of Science and Technology Beijing. All rights reserved.

Slip Line Field Solution for Second Pass in Lubricated 4-High Reversing Cold Rolling Sheet Mill

The development of a possible slip line field (slf) for theoretical calculations of the deforming pressure (load) in a second pass of a lubricated cold rolling sheet mill and validation using values from an aluminium sheet rolling mill was done in this work. This will be relevant in the manufacturing industries providing an easy method for determining necessary applied rolling load. Experimental rolling was carried out to observe the shear lines in the deformation field. Construction of possible slip line field model was developed adhering strictly to assumptions of rigid plastic model. Calculation of the deforming force/load was achieved using Hencky’s equation. Results showed that the load calculations for constructed slip line field using aluminium sheet rolling as an example tallied with values obtained from Tower Aluminium rolling mill. Slip line fields constructed for the second pass described adequately the rolling pressure in the cold rolling process, giving a valid solution of the exact load estimates on comparison with the industrial load values. Roll pressure along the arc of contact rose fairly linearly from the entrance to a maximum at the exit point. This work showed that slf for the first pass in a cold rolling mill cannot be used for subsequent passes;it requires construction of slfs for each pass in the cold rolling process.

Analysis of formation causes for "oil-burn" defects and control measures during cold rolling of silicon steel

It has been found through analysis of defect components and micrographs that ＂oil-burn＂ defects on non- oriented silicon steel surf＇aces, which of ten occur after cold rolling, are composed of Fe, O, Si and C. This study analyzed the fomation mechanism of ＇toil-burn＂ defects and the strategies to prevent them,and proposed, according to the equipment and process status in the production fields ,some relevant optimized control measures and process adjustment schemes from two perspectives of reducing the residual emulsion trod avoiding the specific temperature range. The results demonstrate that the application of the proposed optimization meastu＇es effectively inhibits the formation of ＂oil-bum＂ defects.

STUDY OF THE 3-DIMENSIONAL STRESSES OF COLD STRIP ROLLING UNDER CENTRE WAVE

On the conditions ofthe width to thickness ratio 625 and the centre wave the 3-dimensional stresses distributions of cold strip rolling are studied by using the third power spline function finite strip method. The computed results of the rolling pressure, the 2-directional friction stresses and the front and back tension stresses agree with the experimental results well. In this paper, the frictional stresses of stagnation zone are computed by using preliminary displacement principle and the computing precision is improved.