Metal Flowing of Involute Spline Cold Roll-beating Forming

The present research on involute spline cold roll-beating forming is mainly about the principles and motion relations of cold roll-beating,the theory of roller design,and the stress and strain field analysis of cold roll-beating,etc.However,the research on law of metal flow in the forming process of involute spline cold roll-beating is rare.According to the principle of involute spline cold roll-beating,the contact model between the rollers and the spline shaft blank in the process of cold roll-beating forming is established,and the theoretical analysis of metal flow in the cold roll-beating deforming region is proceeded.A finite element model of the spline cold roll-beating process is established,the formation mechanism of the involute spline tooth profile in cold roll-beating forming process is studied,and the node flow tracks of the deformation area are analyzed.The experimental research on the metal flow of cold roll-beating spline is conducted,and the metallographic structure variation,grain characteristics and metal flow line of the different tooth profile area are analyzed.The experimental results show that the particle flow directions of the deformable bodies in cold roll-beating deformation area are determined by the minimum moving resistance.There are five types of metal flow rules of the deforming region in the process of cold roll-beating forming.The characteristics of involute spline cold roll-beating forming are given,and the forming mechanism of involute spline cold roll-beating is revealed.This paper researches the law of metal flow in the forming process of involute spline cold roll-beating,which provides theoretical supports for solving the tooth profile forming quality problem.