Modeling,Simulation and Experiment of Electro-hydraulic Screw Down Servo System of Seamless Tube Rolling Mill

Electro-hydraulic screw down servo system（HSDS） is widely used in seamless tube rolling mill in western companies.But in Chinese companies,mechanical screw down system（MSDS） is popularly equipped and has a serious disadvantage that the roller would often be locked when it is overloaded.For the purpose of designing the first set of domestic twin-roller,four-cylinder and six-framework electro-hydraulic HSDS of seamless tube rolling mill,an experiment system that can simulate the process of seamless tube rolling is constructed.A digital simulation model of the experiment system is built with AMESim software and validated by comparing the simulation results with experiment results.The sudden load response of the screw piston position is studied with the built model and the experiment system.To improve the HSDS＇s positioning accuracy with large load,a hybrid control scheme of combining load disturbance feedforward compensation（LDFC） method based on servo valve＇s pressure-stroke feature and anti-saturation integral control（ASIC） is proposed.Both results of simulation and experiment indicate that the transient response time of the single-roller HSDS with the proposed scheme decreases from 0.65 s to less than 0.2 s without static error.To improve the system dynamic stiffness and production qualified rate,a flow rate feedforward compensation（FFC） control strategy based on oil compressibility to dynamic position error is proposed.This FFC strategy is validated with experiments in which the transient error caused by sudden load is reduced to less than 25% of that without FFC.By extending the simulation model to HSDS of a twin-roller,four-cylinder rolling mill,analyzing the mill deformation,and applying the LDFC,ASIC and FFC to the HSDS,the dynamic performance and positioning accuracy of compensated multi-roller HSDS at biting moment are predicted.The research results provide a theoretical and experimental basis for the design of HSDS of seamless steel tube rolling mill.

Influence of process parameters on the microstructural evolution of a rear axle tube during cross wedge rolling

In the shaping process of cross wedge rolling（CWR）, metal undergoes a complex microstructural evolution, which affects the quality and mechanical properties of the product. Through secondary development of the DEFORM-3D software, we developed a rigid plastic finite element model for a CWR-processed rear axle tube, coupled with thermomechanical and microstructural aspects of workpieces. Using the developed model, we investigated the microstructural evolution of the CWR process. Also, the influence of numerous parameters, including the initial temperature of workpieces, the roll speed, the forming angle, and the spreading angle, on the grain size and the grain-size uniformity of the rolled workpieces was analyzed. The numerical simulation was verified through rolling and metallographic experiments. Good agreement was obtained between the calculated and experimental results, which demonstrated the reliability of the model constructed in this work.

ROLLING CONDITION FOR ROLLERS ALONG CAMS IN COLD DOUBLE-SET MULTI-ROLLER TUBE ROLLING

The necessary condition of pure rolling for the rollers moving along its individual cams are obtained by the analysis of the loading status of the rollers and it provides a theoretical basis for adjustment of rolling stand.

Friction Coefficient Between Rolling Tube and Mandrel of Full Floating Mandrel Mill

In the process of steel tube production, continuous tube rolling is the foremost forming procedure and the critical step that decides the dimension precision and the surface quality. In the actual production of the 4140 mm full floating mandrel mill in Steel Tube Branch in Baosteel, steel T91 was chosen to be the typical sample, self-made rolling force transducer and mandrel velocity testing equipment were used, and a series of comprehensive tests on rolling parameters including the rolling force and mandrel velocity were carried out. After the experiment, the friction state between rolling tube and mandrel was analyzed. The friction coefficient was calculated and the values of 0. 033 - 0. 074 in each mill were obtained. The friction coefficient increases obviously along the rolling direction.

A New Model for Simulation of Cold Roll-Forming of Tubes by Using Spline Finite Strip Method

A new model,called object model,for the simulation of cold roll-forming of tubes is presented.The model inherits the advantages of old models and is the embodiment of forming process that the strip is rolled step by step from feed rollers to last rolling pass.The elastic-plastic large deformation spline finite strip method based on updated Lagrangian method has been developed by improving the stiffness and transition matrix.Combined theory formulas and new analytical model,the forming process of a tube has been simulated successfully as an example.The analytical results are submitted and indicate that the proposed simulation method and new model are applicable.