The precision width control is vital for product quality and production economy in plate width control process, so short stroke control method was used in plate rolling by opening or closing edger gap so as to avoid h...The precision width control is vital for product quality and production economy in plate width control process, so short stroke control method was used in plate rolling by opening or closing edger gap so as to avoid head end necking. Head end necking on different broadening ratio was analyzed, and sections of different elongations at edger roiling was calculated; based on the law of volume constancy, the adjustment functions were described by parabolic functions. Control curves were developed with three Gaussian curves by means of additional combining; SSC control curve was changed with different weights of those curves, w1 effect one-third of SSC length, w2 effect two-third of SSC length, w3 effect all three parts of SSC length. In order to adjust the amount of weights for precise quantification, PSO algorithm was used to build sufficiency function so as to obtain best rectangular degree by global optimization. Practical applications showed that the method proposed is available to improve the product rolling yields by 1.0% -2. 0% and worthy to apply to plate rolling.展开更多
Using the twin shear stress yield criterion, the surface integral of the co-line vectors, and the integration depending on upper limit, Kobayashi＇s three-dimensional velocity field of rolling was analyzed and an anal...Using the twin shear stress yield criterion, the surface integral of the co-line vectors, and the integration depending on upper limit, Kobayashi＇s three-dimensional velocity field of rolling was analyzed and an analytical expression of rolling torque and single force was obtained. Through redoing the same experiment of rolling pure lead as Sims, the calculated results by the above expression were compared with those of Kobayashi and Sims formulae. The results show that the twin shear stress yield criterion is available for rolling analysis and the calculated results by the new formula are a little higher than those by Kobayashi and Sims ones if the reduction ratio is less than 30%.展开更多
基金Sponsored by the National Natural Science Foundation of China(Grant No.51001023)the Fundamental Research Funds for the Central Universities(Grant No.N100307004)
文摘The precision width control is vital for product quality and production economy in plate width control process, so short stroke control method was used in plate rolling by opening or closing edger gap so as to avoid head end necking. Head end necking on different broadening ratio was analyzed, and sections of different elongations at edger roiling was calculated; based on the law of volume constancy, the adjustment functions were described by parabolic functions. Control curves were developed with three Gaussian curves by means of additional combining; SSC control curve was changed with different weights of those curves, w1 effect one-third of SSC length, w2 effect two-third of SSC length, w3 effect all three parts of SSC length. In order to adjust the amount of weights for precise quantification, PSO algorithm was used to build sufficiency function so as to obtain best rectangular degree by global optimization. Practical applications showed that the method proposed is available to improve the product rolling yields by 1.0% -2. 0% and worthy to apply to plate rolling.
基金ItemSponsored by National Natural Science Foundation of China (50474015)
文摘Using the twin shear stress yield criterion, the surface integral of the co-line vectors, and the integration depending on upper limit, Kobayashi＇s three-dimensional velocity field of rolling was analyzed and an analytical expression of rolling torque and single force was obtained. Through redoing the same experiment of rolling pure lead as Sims, the calculated results by the above expression were compared with those of Kobayashi and Sims formulae. The results show that the twin shear stress yield criterion is available for rolling analysis and the calculated results by the new formula are a little higher than those by Kobayashi and Sims ones if the reduction ratio is less than 30%.
