Synthesis of a Novel UV Curable Aqueous Dispersion Polyurethane PDHA-PEDA-PU and the Properties of Cured Film

A novel ultraviolet （UV） curable aqueous dispersion polyurethane PDHA-PEDA-PU was synthesized based on isophorone diisocyanate （IPDI）, polyester dihydric alcohol （PDHA）, dimethylol propionic acid （DMPA）, pentaerythritol diacrylate （PEDA）, 2-hydroxyethyl acrylate （HEA） and triethylamine （TEA）. Acrylate groups were incorporated in the side and end of PDHA-PEDA-PU chain. The C=C content in the chain can be controlled easily through the change of IPDI/PDHA/PEDA ratio. Fourier transform infrared spectroscopy （FTIR） was used to identify the structure of prepolymer, aqueous dispersion and cured polyurethane. The curing rule of the polyurethane for different C=C content has been investigated depending on the change of C=C content during the curing process. The hardness, thermal stability and scrub resistance to MEK of UV cured PDHA-PEDA-PU were also discussed for the samples with different C=C content.

Synthesis and properties of UV curable polyurethane acrylates based on two different hydroxyethyl acrylates

Two kinds of UV curable polyurethane acrylate oligomers （PUPA and PUCA） were synthesized via the addition reaction between isophorone diisocyanate （IPDI） and polyethylene glycol monoacrylate （PEA6） or polycaprolactone modified hydroxyethyl acrylate （PCLA2）. The structures of PUPA and PUCA were characterized by Fourier transform infrared spectroscopy （FT-IR）, IH nuclear magnetic resonance （^H NMR）, gel permeation chromatography （GPC） and differential scanning calorimeter （DSC）, and the thermal stability and dynamic mechanical thermal properties of their cured films were measured by thermogravimetric analysis （TGA） and dynamic mechanical analysis （DMA）, respectively. The viscosity of the oligomers and mechanical properties of the cured films were also studied. The results show that both oligomers have narrow molecular weight distribution. The viscosity of PUPA is 2.310 Pa.s at 25 ℃, while that of PUCA is： up to 3.980 Pa-s. The UV cured PUPA and PUCA films have homogeneous phase structure, and the PUCA film shows higher glass transition temperature and storage modulus. Furthermore, the PUCA film possesses better mechanical properties than PUPA, while the latter shows better alkali resistance.

Enhancement of room-temperature magnetoresistance in La_(0.5)Sm_(0.2)Sr_(0.3)MnO_3/(Ag_2O)_(x/2)

La0.5Sm0.2Sr0.3MnO3/（Ag2O）x/2 （x = 0.00, 0.04, 0.08, 0.25, 0.30） samples were prepared by the solid-state reaction method, and their transport behaviors, transport mechanism, and magnetoresistance effect were studied through the measurement and fitting of p-T curves. The results show that the element Ag takes part in reaction when the doping amount is small. Ag is mainly distributed at the grain boundary of the host material and is in metallic state when the doping amount is relatively large; then the system becomes a two-phase composite. A small amount of Ag doping can apparently increase grain-boundary magnetoresistance induced by the spin-dependent scattering. The resistivity of the sample doped with 30 mol% Ag is one order of magnitude smaller than that of low-doped samples, and its magnetoresistance in the magnetic field of 0.5 T and at 300 K is strengthened apparently reaching 9.4%, which is connected not only with the improvement of the grain-boundary structure of the host material but also with the decrease of material resistivity.

Water-soluble UV curable urethane methyl acrylate coating：preparation and properties

Two kinds of water-soluble and ultraviolet (UV) curable oligomers were synthesized and characterized. The oligomers were evaluated as resins for water-based UV curable coating. The rheology of the two oligomers' aqueous so-lutions was investigated in terms of solid fraction, pH dependence, and temperature dependence. The solutions were found to be Newtonian fluid showing rather low viscosity even at high solid fraction of 0.55. The drying process of the coatings and the properties of the cured coatings were studied by comparing them with water-dispersed UV-curable polyurethane methyl acrylate. It was evident that the water-soluble coating dried more slowly; and that the overall properties were inferior to those of the water-dispersed coating.

Room-Temperature Assembled MXene-Based Aerogels for High Mass-Loading Sodium-Ion Storage

Low-temperature assembly of MXene nanosheets into three-dimensional(3D) robust aerogels addresses the crucial stability concern of the nano-building blocks during the fabrication process,which is of key importance for transforming the fascinating properties at the nanoscale into the macroscopic scale for practical applications.Herein,suitable cross-linking agents(amino-propyltriethoxysilane,Mn^(2+),Fe^(2+),Zn^(2+),and Co^(2+)) as interfacial mediators to engineer the interlayer interactions are reported to realize the graphene oxide(GO)-assisted assembly of Ti_(3)C_(2)T_(x) MXene aerogel at room temperature.This elaborate aerogel construction not only suppresses the oxidation degradation of Ti_(3)C_(2)T_(x) but also generates porous aerogels with a high Ti_(3)C_(2)T_(x) content(87 wt%) and robustness,thereby guaranteeing the functional accessibility of Ti_(3)C_(2)T_(x) nanosheets and operational reliability as integrated functional materials.In combination with a further sulfur modification,the Ti_(3)C_(2)T_(x) aerogel electrode shows promising electrochemical performances as the freestanding anode for sodium-ion storage.Even at an ultrahigh loading mass of 12.3 mg cm^(-2),a pronounced areal capacity of 1.26 mAh cm^(-2) at a current density of 0.1 A g^(-1) has been achieved,which is of practical significance.This work conceptually suggests a new way to exert the utmost surface functionalities of MXenes in 3D monolithic form and can be an inspiring scaffold to promote the application of MXenes in different areas.

Room-temperature fast assembly of 3D macroscopically porous graphene frameworks for binder-free compact supercapacitors with high gravimetric and volumetric capacitances

Synthesis and applications of three-dimensional(3 D)porous graphene frameworks(GFs)have attracted extensive interest owing to their intriguing advantages of high specific surface area,enriched porosity,excellent electrical conductivity,exceptional compressibility and processability.However,it is still challenging for economically viable,fast and scalable assembly of 3 D GFs at room-temperature.Herein,we reported a one-step scalable strategy for fast self-assembly of graphene oxide into 3 D macroscopically porous GFs,with assistance of polyoxometalates(POM)as functional cross-linker and hydrazine hydrate as reductant at room-temperature.The resulting 3 D interconnected macroporous POM-GFs uniformly decorated with ultrasmall POM nanoclusters were directly processed into binder-/additive-free film compact electrodes(1.68 g cm^(-3))with highly aligned,layer-stacked structure and electrically conductivity(622 S m-1)for high-performance supercapacitors,showing an impressive gravimetric capacitance of205 F g-1,volumetric capacitance of 334 F cm^(-3) at 1 mV s^(-1),and remarkable cycling stability with capacitance retention of 83%after 10,000 cycles,outperforming the most reported GFs.Further,the solid-state supercapacitors offered excellent gravimetric capacitance of 157 F g-1 exceptionally volumetric capacitance of 115 F cm^(-3) at 2 mV s^(-1) based on single electrode,and volumetric energy density of2.6 mWh cm^(-3).Therefore,this work will open novel opportunities to room-temperature fast assembly of 3 D porous graphene architectures for high-energy-density supercapacitors.

Benzoin Condensation in Imidazolium Based Room-temperature Ionic Liquids

Benzoin condensation promoted efficiently in three imidazolium based room tempera- ture ionic liquids [bmim]Br, [bmim]BF4 and [Bnmim]BF4 is reported for the first time. Benzoins were obtained in up to 91% yield within less than 30 min under mild conditions.

Understanding Sulfur Redox Mechanisms in Different Electrolytes for Room-Temperature Na-S Batteries

This work reports influence of two different electrolytes,carbonate ester and ether electrolytes,on the sulfur redox reactions in room-temperature Na-S batteries.Two sulfur cathodes with different S loading ratio and status are investigated.A sulfur-rich composite with most sulfur dispersed on the surface of a carbon host can realize a high loading ratio(72%S).In contrast,a confined sulfur sample can encapsulate S into the pores of the carbon host with a low loading ratio(44%S).In carbonate ester electrolyte,only the sulfur trapped in porous structures is active via‘solid-solid’behavior during cycling.The S cathode with high surface sulfur shows poor reversible capacity because of the severe side reactions between the surface polysulfides and the carbonate ester solvents.To improve the capacity of the sulfur-rich cathode,ether electrolyte with NaNO_(3) additive is explored to realize a‘solid-liquid’sulfur redox process and confine the shuttle effect of the dissolved polysulfides.As a result,the sulfur-rich cathode achieved high reversible capacity(483 mAh g^(−1)),corresponding to a specific energy of 362 Wh kg^(−1) after 200 cycles,shedding light on the use of ether electrolyte for high-loading sulfur cathode.

Ethanol-driven Room-temperature Synthesis of Potential Green-emitting Phosphors： a Case Study of Tb^3＋-doped CaHPO4

A novel green nanophosphor CaHPO4：Tb3＋ was synthesized via a room-temperatureco-precipitation route driven by ethanol solvent. X-ray powder diffraction （XRD）, scanningelectron microscopy （SEM） and photoluminescence spectroscopy （PL） techniques were utilizedto characterize the structure, morphology and fluorescence performance of the obtained powders.The results demonstrated that the prepared samples were well crystallized with triclinic phaseCaHPO4 structure and particle-like morphology. Photoluminescence measurements indicated thatCaHPOa：Tb3＋ had a strong absorption peak at 370 nm and exhibited characteristic emissions withseveral sharp peaks corresponding to the transitions 5D4-7FJ （jr = 6-3） of Tb3＋. Moreover, theluminescence optimum concentration for CaHPO4：Tb3＋ was determined to be 11 mol%, whichmight be a promising green-emitting ohosohor for display applications.

Synthesis and Properties of UV-curable Hyperbranched Polyurethane and Its Application in the Negative-type Photoresist

UV-curable hyperbranched polyurethane （UV-HBPU） containing carboxyl groups was synthesized from isophorone diisocyanate （IPDI）, diethanolamine （DEOA）, polyethylene glycol （PEG-400）, hydroxyethyl acrylate （HEA）, and 2,2-his （hydroxymethyl） propionic acid （DMPA）. The UV-HBPU was used as a negative-type photoresist for a printed circuit board （PCB）. Fourier-transform infrared spectroscopy （FTIR） and proton nuclear magnetic resonance （1HNMR） spectroscopy of UV-HBPUs indicated that the synthesis was successful. Differential scanning calorimetry （DSC） and thermogravimetric analysis （TGA） showed that the thermal stability of the UV-HBPUs decreased as the HEA content increased. The polymer exhibited excellent photoresist properties, and the resolution of circuits based on this negative-type photoresist reached 10 μm.

Room-temperature conversion of ethane and the mechanism understanding over single iron atoms confined in graphene

The catalytic conversion of ethane to high value-added chemicals is significantly important for utilization of hydrocarbon resources.However, it is a great challenge due to the typically required high temperature(> 400 ℃) conditions.Herein, a highly active catalytic conversion process of ethane at room temperature(25 ℃) is reported on single iron atoms confined in graphene via the porphyrin-like N4-coordination structures.Combining with the operando time of flight mass spectrometer and density functional theory calculations, the reaction is identified as a radical mechanism, in which the C–H bonds of the same C atom are preferentially and sequentially activated, generating the value-added C2 chemicals, simultaneously avoiding the over-oxidation of the products to CO2.The in-situ formed O–FeN4–O structure at the single iron atom serves as the active center for the reaction and facilitates the formation of ethyl radicals.This work deepens the understanding of alkane C–H activation on the FeN4 center and provides the reference in development of efficient catalyst for selective oxidation of light alkane.

Synthesis of a Novel UV-curable Prepolymer Polypropyleneglycol Diglycidyl Ether Diacrylate

A novel UV-curable prepolymer polypropyleneglycol diglycidyl ether diacrylate （PPGGEA） was synthesized by utilizing polypropyleneglycol diglycidyl ether （PPGGE） and acrylic acid （AA） as starting materials, N, N-dimethylbenzylamine as catalyst and p-hydroxyanisole as inhibitor. The optimum synthetic conditions were in the following： the concentration of N, N-dimethylbenzylamine was 0.80 wt% of reactants, the concentration of p-hydroxyanisole was 0.3 wt% of reactants, the reaction temperature was 90-110 ~C, and the molar ratio of PPGGE to AA was 1：2.2. Meanwhile, 1-hydroxycyclohexyl phenyl ketone of a UV-cured initiator was added to the synthesized PPGGEA to prepare a kind of UV-cured coating. The mechanical properties of the UV-cured films were determined, giving 29.99 MPa of tensile strength, 834.27 MPa of the Young＇s modulus and 5.66% of elongation at tear.

High room-temperature magnetization in Co-doped TiO_(2) nanoparticles promoted by vacuum annealing for different durations

To clarify the contribution of oxygen vacancies to room-temperature ferromagnetism(RTFM)in cobalt doped TiO_(2)(Co-TiO_(2)),and in order to obtain the high level of magnetization suitable for spintronic devices,in this work,Co-TiO_(2) nano-particles are prepared via the sol-gel route,followed by vacuum annealing for different durations,and the influence of vacu-um annealing duration on the structure and room-temperature magnetism of the compounds is examined.The results reveal that with an increase in annealing duration,the concentration of oxygen vacancies rises steadily,while the saturation magnetiza-tion(Ms)shows an initial gradual increase,followed by a sharp decline,and even disappearance.The maximum Ms is as high as 1.19 emu/g,which is promising with respect to the development of spintronic devices.Further analysis reveals that oxygen va-cancies,modulated by annealing duration,play a critical role in tuning room-temperature magnetism.An appropriate concentra-tion of oxygen vacancies is beneficial in terms of promoting RTFM in Co-TiO_(2).However,excessive oxygen vacancies will result in a negative impact on RTFM,due to antiferromagnetic superexchange interactions originating from nearest-neighbor Co^(2+)ions.

MODIFIED ULTRAVIOLET-CURABLE WATER DISPERSIBLE POLYURETHANE-ACRYLATES

Three kinds of UV-curable self-emulsified polyurethane-acrylate (PUA) prepolymer, i.e., conventional, chain extended and grafted PUAs, were prepared. The relatively small particle size of the PUA dispersions indicates that the PUA prepolymers exhibit sufficient aqueous dispersibility. The PUA prepolymers can substantially lower the interfacial tension of water. Chain-extended PUA dispersions exhibit pseudoplastic behavior and thixotropy to a greater extent than do their conventional counterpart. The chain-extended and grafted PUA photocure to higher conversion than do the conventional PU equivalent. The results of DSC measurement suggest that there exists phase mixing between the hard and the soft segment phases for the PUAs based on PEG 400 that is the comparatively short soft segment in the prepolymer. For the PUA prepolymers based on PEG having higher M-n values, chain-extending and grafting could impede the phase separation between the hard and the soft segment domains. The adhesion, impact strength and flexibility of the photocured films were tested.

Synthesis of a Novel UV-curable Prepolymer Hexanediol Diglycidyl Ether Diacrylate and Its Cured Film Tensile Property

A novel UV-curable prepolymer hexanediol diglycidyl ether diacrylate （HDGEA） was synthesized by utilizing hexanediol diglycidyl ether （HDGE） and acrylic acid （AA） as starting materials, N, N-dimethylbenzylamine as catalyst and p-hydroxyanisole as inhibitor. The optimal synthetic conditions were that the concentration of N, N-dimethylbenzylamine was 0.80 wt% of reactants, the concentration of p-hydroxyanisole was 0.3 wt% of reactants, the reaction temperature was 90-110 ℃, and the molar ratio of HDGE to AA was 1︰2.2. Meanwhile, 1-hydroxycyclohexyl phenyl ketone of a UV-curing initiator was added to the synthesized HDGEA to prepare a kind of UV-curing coating. The mechanical properties of the UV-cured films were determined, giving 31.87 MPa of tensile strength, 871.88 MPa of Young＇s modulus and 6.77% of elongation at tear.

Toward intrinsic room-temperature ferromagnetism in two-dimensional semiconductors

Two-dimensional (2D) ferromagnetic semiconductors have been recognized as the most promising candidates for next-generation low-cost, high-performance and nano-scale spintronic applications such as spin field-effect transistors and quantum computation/communication. However, as one of the 125 important scientific issues raised by Science journal in 2005 that "is it possible to create magnetic semiconductors that work at room temperature?", how to achieve a feasible ferromagnetic semiconductor with high Curie temperature is still a long-standing challenge despite of tremendous efforts have been devoted in this field since 1960s. The recent discovery of 2D ferromagnetic semiconductors Cr2Ge2Te6 and CrI3 has evoked new research interests in 2D intrinsic ferromagnetic semiconductors. But the low Curie temperature (<45 K) of these materials is still badly hindering their industrial applications.

Recent Advances in Pure-Organic Host-Guest Room-Temperature Phosphorescence Systems Toward Bioimaging

Organic room-temperature phosphorescence(RTP)materials have garnered considerable attention in the fields of biosensing,optoelectronic devices,and anticounterfeiting because of their substantial Stokes shifts,tunable emission wavelengths,and prolonged lifetimes.These materials offer remarkable advantages for biological imaging applications by effectively reducing environmental autofluorescence and enhancing imaging resolution.Recently,host-guest systems have been employed as efficient approaches to fabricate pure-organic RTP materials for bioimaging,providing benefits such as controllable preparation and flexible modulation.Consequently,an increasing number of corresponding studies are being reported;however,a comprehensive systematic review is still lacking.Therefore,we summarize recent advances in the development of pureorganic RTP materials using host-guest systems with regard to bioimaging,including rigid matrices and sensitization.The challenge and potential of RTP for biological imaging are also proposed to promote the biomedical applications of organic RTP materials with excellent optical properties.

Room-Temperature Synthesis of Fe-containing Mesoporous Silica

A Fe-containing mesoporous silica has been synthesized at room temperature using alkylamine as templating surfactant; XRD, IR, ESR and Si-29 MAS NMR spectra provided evidence of the presence of framework and non-framework iron(III) in Fe-HMS material.

Preparation and Properties of Aqueous SCNTs Dispersion based on A UV-curable Polymeric Dispersant

A novel photosensitive copolymer P（SS-co-AA-g-GMA）（PSAG） was synthesized and utilized to noncovalently functionalize pristine single-walled carbon nanotubes（SCNTs）. PSAG was highly effective for the solubilization of SCNTs in water and validated by UV-vis absorption spectra experiments, resulting in homogeneous and stable PSAG-SCNT aqueous dispersion. The microstructure of SCNTs was observed through Raman spectroscopy and transmission electron microscopy. In addition, compared with the two common polymeric dispersants of Triton X-100 and PSS, PSAG demonstrated more effective performances for dispersing SCNTs under identical conditions. Furthermore, the photosensitive PSAG-SCNTs can be crosslinked after UV irradiation, leading to significant improvement in the water resistance of SCNT films. UV-cured films can be transferred to plastic wrap to form a flexible film with high electrical conductivity.

Room-Temperature Annealing of 1 MeV Electron Irradiated Lattice Matched In0.53Ga0.47As/InP Multiple Quantum Wells

Long-term room-temperature annealing effects of InGaAs/InP quantum wells with different wells （namely triple wells and five wells embedded） and bulk InCaAs are investigated after high energy electron irradiation. It is observed that the photoluminescence （PL） intensity of bulk InGaAs materials is enhanced after low dose electron irradiation and the PL intensity for all the three samples is degraded dramatically when the electron dose is relatively high. With respect to the room-temperature annealing, we find that the PL intensity for both samples recovers relatively fast at the initial stage. The PL performance of multiple quantum-well samples shows better recovery after irradiation compared with the results of bulk InGaAs materials. Meanwhile, the recovery speed factors of multiple quantum-well samples are relatively faster than those of the bulk InGaAs materials as well. We infer that the recovery difference between the quantum-well materials and bulk materials originates from the fact that the radiation induced defects are confined in the quantum wells as a consequence of the free energy barrier between the In0.53Ga0.47 As wells and InP barrier layers.