Hole surface strengthening mechanism and riveting fatigue life of CFRP/aluminum stacks in robotic rotary ultrasonic drilling

Carbon fiber reinforced plastic(CFRP)and aluminum stacks are widely used in aviation industry due to light weight and high performance.Millions of rivet holes need to be drilled on body materials,and more than 80%of fatigue cracks occur at the connection holes,so the damage and residual stress of hole surface have crucial effect on the riveting fatigue life of CFRP/aluminum stacks and the flight performance.Recently,robotic rotary ultrasonic drilling(RRUD)technology is a promising method to machine the stacks.However,the hole surface strengthening mechanism in RRUD and the service performance of the riveting joint are not verified.Thus,in this paper,the hole surface strengthening mechanism of RRUD for CFRP/aluminum stacks is investigated,a theoretical residual stress model is established,and the fatigue life experiment of riveted joints is conducted.Firstly,analysis on residual stress in RRUD is carried out with consideration of strengthening force and cutting temperature.Residual stress model is established based on the calculation of elastic stress,plastic stress and stress release.Validation experiment results show that ultrasonic vibration changes residual stress from tensile stress to compressive stress.At the same time,comparative damage analysis of CFRP hole exit and hole surface in robotic conventional drilling(RCD)and RRUD is presented.Finally,fatigue strength experiments of riveted joints are conducted for performance verification.Experimental results indicate that fatigue life of single-hole riveted joints is increased by 68%with ultrasonic vibration,and four-hole riveted joint arranged according to aerospace design standards is increased by more than 86%.

Cutting force and specific energy for rotary ultrasonic drilling based on kinematics analysis of vibration effectiveness

Rotary ultrasonic drilling(RUD)has become an effective approach for machining advanced composites which are widely using in the field of aeronautics.The cutting kinematics and the corresponding material removal mechanisms are distinct in different drilling areas during RUD.However,these fundamentals have not been fully considered in the existing studies.In this research,two distinct forms of interaction induced by ultrasonic vibration were considered as impact-separation and vibratory lapping between the abrasives and workpiece.And the conditions to guarantee the effectiveness of these interactions were obtained to eliminate diminishing effects of ultrasonic vibration.Based on indentation fracture theory,the penetration depth of abrasives and the axial drilling force model was derived for RUD.The verification tests of C/SiC composites resulted in a prediction error within 15%.Due to the minimal volume of material removed during each vibration cycle,the drilling force was more stable in vibration assisted mode.The specific drilling energy of RUD was firstly calculated based on the measured drilling load.It was found the drilling parameters should be matched with vibration frequency and amplitude to make better usage of the advantages of ultrasonic vibration,which is critical in the vibration assisted processing of advanced materials.