Observability of Airborne Passive Location System with Phase Difference Measurements

With a pair of antennas spaced apart, an airborne passive location system measures phase differences of emitting signals. Regarded as cyclic ambiguities, the moduli of the measurements traditionally are resolved by adding more antenna elements. This paper models the cyclic ambiguity as a component of the system state, of which the observability is analyzed and compared to that of the bear- ings-only passive location system. It is shown that the necessary and sufficient observability condition for the bearings-only passive location system is only the necessary observability condition for the passive location system with phase difference measurements, and that when the system state is observable, the cyclic ambiguities can be estimated by accumulating the phase difference measurements, thereby making the observer able to locate the emitter with high-precision.

Single channel source separation of radar fuze mixed signal based on phase difference analysis

A new method based on phase difference analysis is proposed for the single-channel mixed signal separation of single-channel radar fuze.This method is used to estimate the mixing coefficients of de-noised signals through the cumulants of mixed signals,solve the candidate data set by the mixing coefficients and signal analytical form,and resolve the problem of vector ambiguity by analyzing the phase differences.The signal separation is realized by exchanging data of the solutions.The waveform similarity coefficients are calculated,and the time鈥攆requency distributions of separated signals are analyzed.The results show that the proposed method is effective.

The Real-Time,High Precision Phase Difference Measurement of Electron Density in HL-2A Tokamak

This paper introduces a real-time high precision measurement of phase difference based on Field Programmable Gate Array（FPGA） technology,which has been successfully applied to laser grating interference measurement and real-time feedback of plasma electron density in HL-2A tokamak.It can track the changes of electron density while setting the starting point of the density curve to zero.In a laboratory test,the measuring accuracy of phase difference is less than 0.1°,the time resolution is 80 ns,and the feedback delay is 180 μs.

ACCURACY ANALYSIS OF PASSIVE LOCATION SYSTEM WITH PHASE DIFFERENCE RATE MEASUREMENT

The conventional mono-station passive location techniques of direction finding are low in speed and accuracy, due to the little information available. In this paper, a novel measurement-rate (derivative) of phase difference from a two-element antenna array (interferometer) is introduced, accuracy of a passive location system with this measurement and directions of arrival (DOA) is analyzed, and the Cramer-Rao bound of location error of this system for 3D location is examined by simulations.

Phase Difference Method for DOA Estimation

The phase difference method (PDM) is presented for the direction of arrival (DOA) estimation of the narrowband source. It estimates the DOA by measuring the reciprocal of the phase range of the sensor output spectra at the interest frequency bin. The peak width and variance of the PDM are presented. The PDM can distinguish closely spaced sources with different and unknown center frequencies as long as they are separated with at least one frequency bin. The simulation results show that the PDM has a better resolution than that of the conventional beamforming.

MFPL:Multi-Frequency Phase Difference Combination Based Device-Free Localization

With the popularity of indoor wireless network,device-free indoor localization has attracted more and more attention.Unlike device-based localization where the target is required to carry an active transmitter,their frequent signal scanning consumes a large amount of energy,which is inconvenient for devices with limited energy.In this work,we propose the MFPL,device-free localization(DFL)system based on WiFi distance measurement.First,we combine multi-subcarrier characteristic of Channel State Information(CSI)with classical Fresnel reflection model to get the linear relationship between the change of the length of reflection path and the subcarrier phase difference.Then we calculate the Fresnel phase difference between subcarrier pairs with different spacing from CSI amplitude time series.Finally,we get the change of the length of the reflection path caused by target moving to achieve distance measurement and localization.Using a combination of subcarriers with different spacing to achieve distance measurement effectively broadens the maximum unambiguous distance of the system.To solve the complex non-linear problem of the intersection of two elliptic equations,we introduce Newton's method to transform the non-linear problem into a linear one.The effectiveness of our approach is verified using commodity WiFi infrastructures.The experimental results show our method achieves a median error of 0.87 m in actual indoor environment.

Effect of atomic initial phase difference on spontaneous emission of an atom embedded in photonic crystal

We investigate the effect of initial phase difference between the two excited states of a V-type three-level atom on its steady state behaviour of spontaneous emission. A modified density of modes is introduced to calculate the spontaneous emission spectra in photonic crystal. Spectra in free space are also shown to compare with that in photonic crystal with different relative positions of the excited levels from upper band-edge frequency. It is found that the initial phase difference plays an important role in the quantum interference property between the two decay channels. For a zero initial phase, destructive property is presented in the spectra. With the increase of initial phase difference, quantum interference between the two decay channels from upper levels to ground level turns to be constructive. Furthermore, we give an interpretation for the property of these spectra.

Feedback Control System for Antenna Phase Difference in the LHCD Experiments

It is well accepted that lower hybrid current drive （LHCD） is the most efficient method for non-inductive current drive in fusion devices and the effect of the current drive is dependent on not only microwave power but also its grill phase shift. This paper presents a new kind of feedback control system for antenna phase difference in LHCD experiments. In this highspeed control system, a lot of new technologies and methods are incorporated. The results of the experiments show a very good agreement with the system design.

Optimization of the seismic processing phase-shift plus finite-difference migration operator based on a hybrid genetic and simulated annealing algorithm

Although the phase-shift seismic processing method has characteristics of high accuracy, good stability, high efficiency, and high-dip imaging, it is not able to adapt to strong lateral velocity variation. To overcome this defect, a finite-difference method in the frequency-space domain is introduced in the migration process, because it can adapt to strong lateral velocity variation and the coefficient is optimized by a hybrid genetic and simulated annealing algorithm. The two measures improve the precision of the approximation dispersion equation. Thus, the imaging effect is improved for areas of high-dip structure and strong lateral velocity variation. The migration imaging of a 2-D SEG/EAGE salt dome model proves that a better imaging effect in these areas is achieved by optimized phase-shift migration operator plus a finite-difference method based on a hybrid genetic and simulated annealing algorithm. The method proposed in this paper is better than conventional methods in imaging of areas of high-dip angle and strong lateral velocity variation.

Measurement for Phase Difference Rate without Phase Ambiguity

Firstly,the direction finding solution at the midpoint of a single base array is given for the purpose of this paper and the several functions relation between phase and frequency is also described.Then,the expression of phase difference rate is described based on the multichannel phase difference measurement.With stripping time difference item correspond to the baseline length from phase difference rate,a function is extracted which signifies the differential characteristics of wavelength integer and phase difference in a unit of length.Simulation calculation found that the variation of differential function of path difference in a unit of length is very regular.The corresponding corrected value can is determine directly by distinguishing the range of differential item of phase difference obtained by actual measurement.Thus,the function expression can be obtained that is equivalence with the quondam differential function of path difference and that is nothing to do with the difference item of wavelength integer.On this basic,several parameters are analyzed by using the method of phase difference measurement without phase ambiguity.The research results in this paper may provide a powerful technical support for engineering practical design related to the phase measuring.

Optical simulation of in-plane-switching blue phase liquid crystal display using the finite-difference time-domain method

The finite-difference time-domain method is used to simulate the optical characteristics of an in-plane switching blue phase liquid crystal display.Compared with the matrix optic methods and the refractive method,the finite-difference timedomain method,which is used to directly solve Maxwell＇s equations,can consider the lateral variation of the refractive index and obtain an accurate convergence effect.The simulation results show that e-rays and o-rays bend in different directions when the in-plane switching blue phase liquid crystal display is driven by the operating voltage.The finitedifference time-domain method should be used when the distribution of the liquid crystal in the liquid crystal display has a large lateral change.

CHARACTERISTIC DIFFERENCE METHODS FOR TWO-PHASE DISPLACEMENT IN NATURALLY FRACTURED RESERVOIRS

In this paper we shall give the characteristic difference methods for two phase displace meat problem in naturally fractured reservoirs.We shall prove the existence,uniqueness of the ap proximate solution and a priori discrete L2-error estimates.

Non-contact Acoustic Contour Imaging Method Using Phase Difference in Extremely Shallow Underground

Buried object which exists at extremely shallow underground can be detected by using an acoustic vibration and a SLDV （scanning laser Doppler vibrometer）. Non-contact acoustic exploration can be realized by using air coupled sound. It was confirmed that discovery and the identification of a buried thing were possible using the OFR method （optimum frequency range method）. However, in this method, only the amplitude of the vibration speed spectrum is used and did not use the phase information. Therefore a new imaging method is proposed that used the phase information of the vibration speed spectrum. From the experimental results, the possibility of the outline extraction by using the phase difference between each scan point is confirmed. As a future task, the phase difference image will become clearer by changing the scan point density and long duration time of emitted wave.

THE UPWIND OPERATOR SPLITTING FINITE DIFFERENCE METHOD FOR COMPRESSIBLE TWO-PHASE DISPLACEMENT PROBLEM AND ANALYSIS

For compressible two-phase displacement problem, a kind of upwind operator splitting finite difference schemes is put forward and make use of operator splitting, of calculus of variations, multiplicative commutation rule of difference operators, decomposition of high order difference operators and prior estimates are adopted. Optimal order estimates in L 2 norm are derived to determine the error, in the approximate solution.

VARIABLE GRID FINITE DIFFERENCE METHOD FOR TWO-DIMENSIONAL TWO-PHASEIMMISCIBLE FLOW

An explicit,time-dependent variable grid finite difference method is introduced and analyzed for approximating the solution of a scalar conservation law in two dimension. The scheme is stable,and the numerical solution is proved to converges to the relevant physical solution.

PHASE SEPARATION OF RETINAL SCHIFF BASE IN TWO-COMPONENT LB FILM WITH DIFFERENT LIPIDS

Phase sepertion of 9-cis-retinal schiff base in two-component LB film with different lipids has been observed under Brewster Angle Microscope

Research on ambiguity resolution aided with triple difference

The ambiguity resolution in the field of GPS is investigated in detail. A new algorithm to resolve the ambiguity is proposed. The algorithm first obtains the floating resolution of the ambiguity aided with triple difference measurement. Decorrelation of searching space is done by reducing the ambiguity covariance matrix＇s dimension to overcome the possible sick factorization of the matrix brought by Z-transformation. In simulation, the proposed algorithm is compared with least-squares ambiguity decorrelation adjustment （LAMBDA）. The result shows that the proposed algorithm is better than LAMBDA because of lesser resolving time, which approximately reduces 20% resolving time. Thus, the proposed algorithm adapts to the high dynamic real-time applications.

Interdecadal Variations of Phase Delays Between Two Nino Indices at Different Time Scales

Phase delays between two Nino indices-sea surface temperatures in Nino regions 1+2 and 3.4 (1950-2001)-at different time scales are detected by wavelet analysis. Analysis results show that there are two types of period bifurcations in the Nino indices and that period bifurcation points exist only in the region where the wavelet power is small. Interdecadal variation features of phase delays between the two indices vary with different time scales. In the periods of 40-72 months, the phase delay changes its sign in 1977: Nino 1+2 indices are 2-4 months earlier than Nino 3.4 indices before 1977, but 3-6 months later afterwards. In the periods of 20-40 months, however, the phase delay changes its sign in another way: Nino 1+2 indices are 1-4 months earlier before 1980 and during 1986-90, but 1-4 months later during 1980-83 and 1993-2001.

The microstructural nanoindentation characteristics of different phases in precision annealed GCr15 steel

This study characterizes the mechanical properties and volume fractions of the different phases in precision annealed GCr15 steel using nanoindentation technology. Experimental results indicate that the nanoindentation hardness of cementite grains is between 14.15 GPa and 17.61 GPa,with a mean value of 15.40 GPa. This hardness is much higher than the hardness of ferrite grains. The nanoindentation hardness of ferrite is between 2.78 GPa and 4.89 GPa, with a mean value of 3.35 GPa. The volume fractions of the different phases were also determined using nanoindentation technology, and the volume fraction of cementite in the steel was identified as 15%.

Modeling of Surface Waves in a Fluid Saturated Poro-Elastic Medium under Initial Stress Using Time-Space Domain Higher Order Finite Difference Method

In this present context, mathematical modeling of the propagation of surface waves in a fluid saturated poro-elastic medium under the influence of initial stress has been considered using time dependent higher order finite difference method (FDM). We have proved that the accuracy of this finite-difference scheme is 2M when we use 2nd order time domain finite-difference and 2M-th order space domain finite-difference. It also has been shown that the dispersion curves of Love waves are less dispersed for higher order FDM than of lower order FDM. The effect of initial stress, porosity and anisotropy of the layer in the propagation of Love waves has been studied here. The numerical results have been shown graphically. As a particular case, the phase velocity in a non porous elastic solid layer derived in this paper is in perfect agreement with that of Liu et al. (2009).