Research on casing deformation prevention technology based on cementing slurry system optimization

The casing deformation prevention technology based on the optimization of cement slurry is proposed to reduce the casing deformation of shale oil and gas wells during hydraulic fracturing. In this paper, the fracture mechanism of hollow particles in cement sheath was firstly analyzed by discrete element method, and the effect of hollow particles in cement on casing deformation was investigated by laboratory experiment method. Finally, field test was carried out to verify the improvement effect of the casing deformation based on cement slurry modification. The results show that the formation displacement can be absorbed effectively by hollow particles inside the cement transferring the excessive deformation away from casing. The particles in the uncemented state provide deformation space during formation slipping. The casing with diameter of 139.7 mm could be passed through by bridge plug with the diameter of 99 mm when the mass ratio of particle/cement reaches 1:4. According to the field test feedback, the method based on optimization of cement slurry can effectively reduce the risk of casing deformation, and the recommended range of hollow microbeads content in the cement slurry is between 15% and 25%.

Acoustic evaluation of cementing quality using obliquely incident ultrasonic signals

Ultrasonic cement bond logging is a widely used method for evaluating cementing quality. Conventional ultrasonic cement bond logging uses vertical incidence and cannot accurately evaluate lightweight cement bonding. Oblique incidence is a new technology for evaluating cement quality with improved accuracy for lightweight cements. In this study, we simulated models of acoustic impedance of cement and cementing quality using ultrasonic oblique incidence, and we obtained the relation between cementing quality, acoustic impedance of cement, and the acoustic attenuation coeffi cient of the A0-mode and S0-mode Lamb waves. Then, we simulated models of different cement thickness and we obtained the relation between cement thickness and the time difference of the arrival between the A0 and A0′ modes.

COST REDUCTION OF CEMENTING FILL IN KANGJIAWAN MINE

ＣＯＳＴＲＥＤＵＣＴＩＯＮＯＦＣＥＭＥＮＴＩＮＧＦＩＬＬＩＮＫＡＮＧＪＩＡＷＡＮＭＩＮＥＷａｎｇＸｉｎｍｉｎ，ＺｈａｎｇＱｉｎｌｉＤｅｐａｒｔｍｅｎｔｏｆＲｅｓｏｕｒｃｅｓＥｘｐｌｏｉｔａｔｉｏｎＥｎｇｉｎｅｒｉｎｇ，ＣｅｎｔｒａｌＳｏｕｔｈＵｎｉｖ...

Cementing properties of steel slag activated by sodium silicates and sodium hydroxide

Steel slag which is mainly composed of γ-Ca2SiO4 and other silicates or alumino-silicates is activated by sodium sificates and sodium hydroxide. The powders of such steel slag are usually inert to hydrate and subsequently have very low ability of cementing. But when sodium silicates and sodium hydroxide are used as activators the steel slag shows very good properties of cementing. When activated with NaOH solution the hardened slurry of the steel slag has a compressive strength of 11.13 MPa after being cured for 28 days. When activated with Na2SiO3 solution the samples after being cured for 28 days have an average compres- sive strength of 40.23 MPa. While the steel slag slurry which is only mixed with water has a compressive of 0.88 MPa after being cured for 28 days.

A Cementing Technology for Shale Oil Horizontal Wells

Organic rich dark shale of Q Formation can be found in many areas(e.g.,in the North of S Basin).The shale target stratum is easy to hydrate and often undergoes spallation.Therefore,centering the casing in the horizontal section of the irregular borehole is relatively difficult.Similarly,achieving a good cementflushing efficiency under complex borehole conditions is a complex task.Through technologies such as centralizer,efficient preflushing,multi-stageflushing and ductile cement slurry,better performances can be achieved.In this study,it is shown that the cementing rate in the DY2H horizontal section is 97.8%,which is more than 34%higher than that of adjacent wells.This cementing matching technology for sidetracking horizontal wells can be used to improve the cementing quality of continental shale and provides a reference for future applications in thisfield.

Optimization of the Content of Tricalcium Silicate of High Cementing Clinker

Optimization of the content of tricalcium silicate（C 3 S）of high cementing clinker was investigated.The content of free-CaO（f-CaO）,mineral composite,the content of C 3 S in the clinker and the hydration product were analyzed by chemical analysis and X-ray diffraction（XRD）.＂K Value＂method of QXRD was selected as a quantitative analysis way to measure the content of C 3 S,and the strength of cement paste was determined.The results show that at a water cement ratio of 0.29,the strength of cement paste with 73%C 3 S can be up to 97.5 MPa at 28 days age.The strength at 28 d of cement with 73%C 3 S is 16%higher than that with 78%C 3 S at water requirement for normal consistency.The relationship between the strength of high cementing Portland cement and the content of C 3 S in the clinker is nonlinear.According to the strength of cement paste,the optimal content of C 3 S in cement clinker is around 73%in this paper.

Chemically induced changes in the geotechnical response of cementing paste backfill in shaking table test

Cemented paste backfill(CPB)is extensively used for underground mine support and/or tailings management.However,CPB behavior under cyclic loadings might be affected by the chemistry of its porewater,which often contains sulphate ions.Till today,no studies have addressed the effect of sulphate on the response of CPB to cyclic loadings by using shaking table technique.This study presents new findings of assessing the effect of the sulphate in the pore water of CPB on its geotechnical response to cyclic loading by using shaking table.CPB mixtures were prepared(with and without sulphate),poured into a flexible laminar shear box,cured to 4 h,and then exposed to cyclic loading using one-dimensional(1D)shaking table.Several parameters(e.g.pore water pressure,settlement,lateral deformation,acceleration,electrical conductivity,effective stress,and liquefaction susceptibility)were monitored or determined before,during,and after shaking.Obtained results indicate that the sulphate-bearing CPB cured to 4 h can be prone to liquefaction under the studied conditions.However,sulphate-free CPB samples are resistant to liquefaction.These results are expected to contribute to a better understanding of the effect of water chemistry on the cyclic behavior of CPB,consequently enhancing the cost-effective design of CPB structures.

Structure and Property Characterization of Oyster Shell Cementing Material

Oyster shell powder was used as the admixture of ordinary portland cement.The effects of different addition amounts and grinding ways on the strength and stability of cement mortar were discussed and proper addition amount of oyster shell powder was determined.The structure and property changes of cementing samples with different oyster shell powder contents were tested by XRD and SEM means.The results revealed that compressive and rupture strengths of the sample with 10% oyster shell powder was close to those of the original one without addition.Stability experiment showed that the sample prepared by pat method had smooth surface without crack and significant expansion or shrinkage after pre-curing and boiling,which indicated that cementing material dosed with oyster shell powder had fine stability.XRD and SEM observation showed that oyster shell independently exists in the cementing material.

An unequal fracturing stage spacing optimization model for hydraulic fracturing that considers cementing interface integrity

Determining reasonable fracturing stage spacing is the key to horizontal well fracturing.Different from traditional stage spacing optimization methods based on the principle of maximum stimulated reservoir volume,in this paper,by considering the integrity of the wellbore interface,a fracture propagation model was established based on displacement discontinuity method and the competition mechanism of multifracture joint expansion,leading to the proposal of an unequal stage spacing optimization model.The results show that in the first stage,the interfacial fractures spread symmetrically along the axis of the central point during that stage,while in the second and subsequent stages,the interfacial fractures of each cluster extend asymmetrically along the left and right sides.There are two kinds of interface connectivity behaviour:in one,the existing fractures first extend and connect within the stage,and in the other,the fractures first extend in the direction close to the previous stage,with the specific behaviour depending on the combined effect of stress shadow and flow competition during hydraulic fracture expansion.The stage spacing is positively correlated with the number of fractures and Young’s modulus of the cement and formation and is negatively correlated with the cluster spacing and horizontal principal stress difference.The sensitivity is the strongest when the Young’s modulus of the cement sheath is 10-20 GPa,and the sensitivity of the horizontal principal stress difference is the weakest.

Estimating shear strength of high-level pillars supported with cemented backfilling using the HoekeBrown strength criterion

Deep metal mines are often mined using the high-level pillars with subsequent cementation backfilling(HLSCB)mining method.At the design stage,it is therefore important to have a reasonable method for determining the shear strength of the high-level pillars(i.e.cohesion and internal friction angle)when they are supported by cemented backfilling.In this study,a formula was derived for the upper limit of the confining pressure σ3max on a high-level pillar supported by cemented backfilling in a deep metal mine.A new method of estimating the shear strength of such pillars was then proposed based on the Hoek eBrown failure criterion.Our analysis indicates that the horizontal stress σhh acting on the cemented backfill pillar can be simplified by expressing it as a constant value.A reasonable and effective value for σ3max can then be determined.The value of s3max predicted using the proposed method is generally less than 3 MPa.Within this range,the shear strength of the high-level pillar is accurately calculated using the equivalent MohreCoulomb theory.The proposed method can effectively avoid the calculation of inaccurate shear strength values for the high-level pillars when the original HoekeBrown criterion is used in the presence of large confining pressures,i.e.the situation in which the cohesion value is too large and the friction angle is too small can effectively be avoided.The proposed method is applied to a deep metal mine in China that is being excavated using the HLSCB method.The shear strength parameters of the high-level pillars obtained using the proposed method were input in the numerical simulations.The numerical results show that the recommended level heights and sizes of the high-level pillars and rooms in the mine are rational.

Challenges and Methods to Improve Well Cementing Quality for 177.8 mm Liner in Gaoshiti-Moxi Area

Gaoshiti-Moxi structure belt of An-Yue Sinian gas reservoir, which was China’s largest monomer Marine carbonate gas reservoir up to now, located in vying-dragon female temple structure group that belong to the ancient uplift slope of the middle of Sichuan. With the exploration and development of high temperature and high pressure carbonate reservoir, a large number of challenges and problems, such as long isolation section, active oil-gas show, large temperature difference, prone to super retarding cement slurry and gas channeling at flare position, have been encountered in the cementing of 177.8 mm hang-liner. In order to solve these problems, numerous measures and methods have been put into use for reducing the safety risk of cementing and improving cementing quality. The large temperature difference channeling cement slurry system, effective anti-pollution spacer and high-pressure packer type liner hanger were developed and applied for field tests in the early stage of development. In addition, equilibrium pressure cementing technology, optimizing of centralizer placement and plasma column structure, improvement of pump displacement and hold pressure while waiting on cement were used to ensure nice displacement efficiency and cementing quality. As Moxi X well for example, the cementing quality factor of merit was 40.29% and the qualification rate was up to 78.87% after adopting the cementing measures and methods above. The cementing quality was much higher than previous level and provided technical support for Gaoshiti-Moxi area.

Using cemented paste backfill to tackle the phosphogypsum stockpile in China:A down-to-earth technology with new vitalities in pollutant retention and CO_(2) abatement

Phosphogypsum(PG),a hard-to-dissipate by-product of the phosphorus fertilizer production industry,places strain on the biogeochemical cycles and ecosystem functions of storage sites.This pervasive problem is already widespread worldwide and requires careful stewardship.In this study,we review the presence of potentially toxic elements(PTEs)in PG and describe their associations with soil properties,anthropogenic activities,and surrounding organisms.Then,we review different ex-/in-situ solutions for promoting the sustainable management of PG,with an emphasis on in-situ cemented paste backfill,which offers a cost-effective and highly scalable opportunity to advance the value-added recovery of PG.However,concerns related to the PTEs'retention capacity and long-term effectiveness limit the implementation of this strategy.Furthermore,given that the large-scale demand for ordinary Portland cement from this conventional option has resulted in significant CO_(2) emissions,the technology has recently undergone additional scrutiny to meet the climate mitigation ambition of the Paris Agreement and China's Carbon Neutrality Economy.Therefore,we discuss the ways by which we can integrate innovative strategies,including supplementary cementitious materials,alternative binder solutions,CO_(2) mineralization,CO_(2) curing,and optimization of the supply chain for the profitability and sustainability of PG remediation.However,to maximize the co-benefits in environmental,social,and economic,future research must bridge the gap between the feasibility of expanding these advanced pathways and the multidisciplinary needs.

The Cementing Techniques Of Salt Formation

This paper analyzes mechnasim of casing failure and collapse by salt formation,discusses cementing techniques of salt zone about casing programme, casing design, preparation of well condition, mud and slurry properties required, cementing technology, and puts forward the measures for solving problems posed when cementing through salt sequences, and illustrates with examples.

Self-cementing Mechanism of CFBC Coal Ashes at Early Ages

The self-cementing mechanism at early ages of circulating fluidized bed combustion （CFBC） coal ashes was studied by X-ray diffraction （XRD）, infrared （IR） spectroscopy and chemical method. The results indicate that the amorphous phase is predominant in CFBC coal ashes. The polymerization degree of [SiO4] and [AlO6] of CFBC desulphurization coal ashes is lower than that of those without desulphurization. The contents of the components with fast hydration rate of CFBC desulphurization coal ashes are significantly greater than those of the ashes without desulphurization. This work confirms that the amorphous minerals with high chemical activity are the main causes of the self-cementing property of CFBC desulphurization coal ashes at early ages.

A Study of Laminar-cementing Displacement Model for Horizontal Well

ＡＳｔｕｄｙｏｆＬａｍｉｎａｒ－ｃｅｍｅｎｔｉｎｇＤｉｓｐｌａｃｅｍｅｎｔＭｏｄｅｌｆｏｒＨｏｒｉｚｏｎｔａｌＷｅｌｌＺｈｅｎｇＹｏｎｇｇａｎｇ；ＨａｏＪｕｎｆａｎｇ（ＵｎｉｖｅｒｓｉｔｙｏｆＰｅｔｒｏｌｅｕｍ，Ｄｏｎｇｙｉｎｇ）（Ｓｏｕｔｈｗｅｓｔ...

Development and application of novel high‐efficiency composite ultrafine cement grouts for roadway in fractured surrounding rocks

The fractured surrounding rocks of roadways pose major challenges to safe mining.Grouting has often been used to reinforce the surrounding rocks to mitigate the safety risks associated with fractured rocks.The aim of this study is to develop highly efficient composite ultrafine cement(CUC)grouts to reinforce the roadway in fractured surrounding rocks.The materials used are ultrafine cement(UC),ultrafine fly ash(UF),ultrafine slag(US),and additives(superplasticizer[SUP],aluminate ultrafine expansion agent[AUA],gypsum,and retarder).The fluidity,bleeding,shrinkage,setting time,chemical composition,microstructure,degree of hydration,and mechanical property of grouting materials were evaluated in this study.Also,a suitable and effective CUC grout mixture was used to reinforce the roadway in the fractured surrounding rock.The results have shown that the addition of UF and US reduces the plastic viscosity of CUC,and the best fluidity can be obtained by adding 40%UF and 10%US.Since UC and UF particles are small,the pozzolanic effect of UF promotes the hydration reaction,which is conductive to the stability of CUC grouts.In addition,fine particles of UC,UF,and US can effectively fill the pores,while the volumetric expansion of AUA and gypsum decreases the pores and thus affects the microstructure of the solidified grout.The compressive test results have shown that the addition of specific amounts of UF and US can ameliorate the mechanical properties of CUC grouts.Finally,the CUC22‐8 grout was used to reinforce the No.20322 belt roadway.The results of numerical simulation and field monitoring have indicated that grouting can efficaciously reinforce the surrounding rock of the roadway.In this research,high‐performance CUC grouts were developed for surrounding rock reinforcement of underground engineering by utilizing UC and some additives.

Microbial Monitoring and Mitigaiton in Cementing Operations

Microbial contamination and bacteria growth in the cementing makup water impact cementing operation and integrity.To avoid the premature cement setting caused by microbial growth,the water is usually treated with biocides for microbial control before mixing.This treatment will also prevent biodegradation of the added polymers and stabilize the slurry rheological properties.Make-up water and cementing mix samples were collected from active drilling rigs in the field.In 12 hours biocide addition program,the tested biocide at 50,100,250,and 500 ppm for cementing operations revealed acceptable control of both GAB and SRB numbers in one Field,but not in another Field.In 24 hours biocide addition program,revealed varying levels for control microbial contamination in cementing operations,with higher efficiency with Field B samples opposed to field A,and with better control at higher concentrations of tested biocide at 250,and 500 ppm.As a recommendation therefore,usage of another biocide with a different chemistry at Field A is encouraged once a new biocide is selected.

A coupled model of temperature and pressure based on hydration kinetics during well cementing in deep water

Considering the complicated interactions between temperature,pressure and hydration reaction of cement,a coupled model of temperature and pressure based on hydration kinetics during deep-water well cementing was established.The differential method was used to do the coupled numerical calculation,and the calculation results were compared with experimental and field data to verify the accuracy of the model.When the interactions between temperature,pressure and hydration reaction are considered,the calculation accuracy of the model proposed is within 5.6%,which can meet the engineering requirements.A series of numerical simulation was conducted to find out the variation pattern of temperature,pressure and hydration degree during the cement curing.The research results show that cement temperature increases dramatically as a result of the heat of cement hydration.With the development of cement gel strength,the pore pressure of cement slurry decreases gradually to even lower than the formation pressure,causing gas channeling;the transient temperature and pressure have an impact on the rate of cement hydration reaction,so cement slurry in the deeper part of wellbore has a higher rate of hydration rate as a result of the high temperature and pressure.For well cementing in deep water regions,the low temperature around seabed would slow the rate of cement hydration and thus prolong the cementing cycle.

Dynamic response of jetting and cementing bucket platform to wave and current loading

The jetting and cementing bucket platform （JCBP） is a new type offshore oil-drilling platform. This paper aims to establish an analysis method for calculating the dynamic response of this platform. Based on the theory of elastic half space, the dynamic stiffness and damping of the platform＇ s foundation were obtained and attached to the end of the platform＇ s main jackets as a boundary condition. Then using finite element method （FEM）, the dynamic response of the platform due to wave and current loading was calculated. Furthermore, the whole platform＇ s finite element model was established and the dynamic response of the platform was calculated. The numerical results demonstrate that the present method by the usage of elastic half space theory and FEM is simple and it is reliable and efficient to calculate dynamic behavior of the platform in response to wave and current loading.

CNPC's New Progress in Well Cementing Techniques

Well cementing is an important step in petroleum engineering territory. Through many years study and research, China Nation Petroleum Corporation(abbreviated as CNPC) has made many good progresses in cementing process, and a series of cementing materials, cementing tools, and associated cementing techniques to them have been developed. Over the recent years, there have been significant improvements in application of single slurry system to super deep well, horizontal well, large displacement well and wells with large temperature span between cementing top and well bottom. Favorable results have been gained in field application of super high density cement slurry system and super low density cement slurry system. Application of conventional cementing tools and accessories has been the matured techniques, and breakthroughs have been made in liner hanger and swellable material.