The mechanical behavior of shape memory alloys （SMAs） is closely related to the formation and evolution of its microstructures. Through theoretical analysis and experimental observations, it was found that the stres...The mechanical behavior of shape memory alloys （SMAs） is closely related to the formation and evolution of its microstructures. Through theoretical analysis and experimental observations, it was found that the stress-induced martensitic transformation process of single crystal Cu-based SMA under uniaxial tension condition consisted of three periods： nucleation, mixed nucleation and growth, and merging due to growth. During the nucleation, the stress dropped rapidly and the number of interfaces increased very fast while the phase fraction increased slowly. In the second period, both the stress and the interface number changed slightly but the phase fraction increased dramatically. Finally, the stress and the phase fraction changed slowly while the number of interfaces decreased quickly. Moreover, it was found that the transformation could be of multi-stage： sharp stress drops at several strains and correspondingly, the nucleation and growth process occurred quasi-independently in several parts of the sample.展开更多
Uncontrolled growth of lithium dendrite will lead to low Coulombic efficiency and poor cycle stability,which hinders the commercialization of lithium metal batteries.Herein,a novel modified lithium anode with reduced ...Uncontrolled growth of lithium dendrite will lead to low Coulombic efficiency and poor cycle stability,which hinders the commercialization of lithium metal batteries.Herein,a novel modified lithium anode with reduced graphene oxide conductive network containing trace lithiophilic phosphorus(P-rGO/Cu)is prepared by electrospraying technique combined with heat treatment process.The rGO layer has a concave and undulating conductive structure,which can significantly improve the effective electrical contact between lithium metal and the current collector,speed up the kinetics of interfacial electron transport and reaction,and improve the resistance of the negative electrode to the internal stress caused by volume change of the lithium,which is advantageous for the stability of the SEI film.The extremely small and uniformly distributed red phosphorus element avoids the volume change caused by lithiation to the maximum extent.Lithiophilic two-phase compound Li_(3)P obtained by alloying P with Li can directionally induce the homogeneous nucleation and dense deposition of lithium metal,address the issue of lithium dendrites and extend the cycle life of the batteries.The obtained P-rGO/Cu exhibits excellent electrochemical performance with an average Coulombic efficiency(CE)of 98%at a current density of 1 mA·cm^(−2) for 400 cycles,and the capacity retention rate of the full cell matched with lithium iron phosphate(LFP)is 83%after 400 cycles at 1C.展开更多
Biomineralization through microbial process has attracted great attention in the field of geotechnical engineering due to its ability to bind granular materials,clog pores,and seal fractures.Although minerals formed b...Biomineralization through microbial process has attracted great attention in the field of geotechnical engineering due to its ability to bind granular materials,clog pores,and seal fractures.Although minerals formed by biomineralization are generally the same as that by mineralization,their mechanical behaviors show a significant discrepancy.This study aims to figure out the differences between biomineralization and mineralization processes by visualizing and tracking the formation of minerals using microfluidics.Both biomineralization and mineralization processes occurred in the Y-shaped sandcontaining microchip that mimics the underground sand layers.Images from different areas in the reaction microchannel of microchips were captured to directly compare the distribution of minerals.Crystal size and numbers from different reaction times were measured to quantify the differences between biomineralization and mineralization processes in terms of crystal kinetics.Results showed that the crystals were precipitated in a faster and more uncontrollable manner in the mineralization process than that in the biomineralization process,given that those two processes presented similar precipitation stages.In addition,a more heterogeneous distribution of crystals was observed during the biomineralization process.The precipitation behaviors were further explained by the classical nucleation crystal growth theory.The present microfluidic tests could advance the understanding of biomineralization and provide new insight into the optimization of biocementation technology.展开更多
基金the National Natural Science Foundation of China(Nos.10372033 and 10672042)Pujiang Scholar Program and Natural Science Foundation of Shanghai(No.06ZR14009).
文摘The mechanical behavior of shape memory alloys （SMAs） is closely related to the formation and evolution of its microstructures. Through theoretical analysis and experimental observations, it was found that the stress-induced martensitic transformation process of single crystal Cu-based SMA under uniaxial tension condition consisted of three periods： nucleation, mixed nucleation and growth, and merging due to growth. During the nucleation, the stress dropped rapidly and the number of interfaces increased very fast while the phase fraction increased slowly. In the second period, both the stress and the interface number changed slightly but the phase fraction increased dramatically. Finally, the stress and the phase fraction changed slowly while the number of interfaces decreased quickly. Moreover, it was found that the transformation could be of multi-stage： sharp stress drops at several strains and correspondingly, the nucleation and growth process occurred quasi-independently in several parts of the sample.
基金This study was financially supported by the Key-Area Research and Development Program of Guangdong Province(No.2020B090919003)the National Natural Science Foundation of China(Nos.52261160384,51872157 and 52072208)+2 种基金the Fundamental Research Project of Shenzhen(No.JCYJ20190808153609561)the Local Innovative and Research Teams Project of Guangdong Pearl River Talents Program(No.2017BT01N111)the Support Plan for Shenzhen Manufacturing Innovation Center(No.20200627215553988).
文摘Uncontrolled growth of lithium dendrite will lead to low Coulombic efficiency and poor cycle stability,which hinders the commercialization of lithium metal batteries.Herein,a novel modified lithium anode with reduced graphene oxide conductive network containing trace lithiophilic phosphorus(P-rGO/Cu)is prepared by electrospraying technique combined with heat treatment process.The rGO layer has a concave and undulating conductive structure,which can significantly improve the effective electrical contact between lithium metal and the current collector,speed up the kinetics of interfacial electron transport and reaction,and improve the resistance of the negative electrode to the internal stress caused by volume change of the lithium,which is advantageous for the stability of the SEI film.The extremely small and uniformly distributed red phosphorus element avoids the volume change caused by lithiation to the maximum extent.Lithiophilic two-phase compound Li_(3)P obtained by alloying P with Li can directionally induce the homogeneous nucleation and dense deposition of lithium metal,address the issue of lithium dendrites and extend the cycle life of the batteries.The obtained P-rGO/Cu exhibits excellent electrochemical performance with an average Coulombic efficiency(CE)of 98%at a current density of 1 mA·cm^(−2) for 400 cycles,and the capacity retention rate of the full cell matched with lithium iron phosphate(LFP)is 83%after 400 cycles at 1C.
基金We acknowledge the funding support from the National Natural Science Foundation of China(Grant Nos.51922024 and 52078085)Chongqing Talents Program,China(Grant No.cstc2021ycjhbgzxm0051).
文摘Biomineralization through microbial process has attracted great attention in the field of geotechnical engineering due to its ability to bind granular materials,clog pores,and seal fractures.Although minerals formed by biomineralization are generally the same as that by mineralization,their mechanical behaviors show a significant discrepancy.This study aims to figure out the differences between biomineralization and mineralization processes by visualizing and tracking the formation of minerals using microfluidics.Both biomineralization and mineralization processes occurred in the Y-shaped sandcontaining microchip that mimics the underground sand layers.Images from different areas in the reaction microchannel of microchips were captured to directly compare the distribution of minerals.Crystal size and numbers from different reaction times were measured to quantify the differences between biomineralization and mineralization processes in terms of crystal kinetics.Results showed that the crystals were precipitated in a faster and more uncontrollable manner in the mineralization process than that in the biomineralization process,given that those two processes presented similar precipitation stages.In addition,a more heterogeneous distribution of crystals was observed during the biomineralization process.The precipitation behaviors were further explained by the classical nucleation crystal growth theory.The present microfluidic tests could advance the understanding of biomineralization and provide new insight into the optimization of biocementation technology.
