New Rotative Radiofrequency Technology: A Multicenter Retrospective Study on Efficacy and Safety

Background: Non-ablative radiofrequency (RF) technology is widely used for the treatment of signs of aging, skin laxity, localized fat and cellulite. However, many RF devices suffer from technical limitations that make the results highly dependent on the user’s experience or clinical limitations that compromise safety, efficacy and comfort. Objective: To evaluate the efficacy and safety of a novel semi-automatic non-ablative RF device for skin tightening, body shaping and cellulite reduction. Materials and methods: A retrospective multicenter study was performed using a novel rotative RF device with temperature and impedance control (Sculpt&Shape®, Sinclair, Spain). 58 subjects underwent a minimum of 4 treatments every 1-2 weeks. A total of 120 treatments (56.7% body and 43.3% facial) and 1034 sessions were performed. Efficacy was evaluated by 3 researchers using the Global Aesthetic Improvement Scale (GAIS) and anthropometric measurements were collected. Subject and practitioner satisfaction were recorded. Safety was evaluated by analyzing the perception of pain during the treatment and the side and adverse effects immediately after treatment and over the next 48 hours. Results: Between 25% and 50% improvement was achieved according to the GAIS. Statistically significant (p < 0.01) abdominal fold reduction of 5.1 mm and circumference reduction of 32.0 mm, 16.4 mm and 13.9 mm were recorded for the abdomen, legs and arms, respectively. 77.5% of subjects and 94.9% of practitioners were either satisfied or very satisfied. Minor adverse effects were found in 0.97% of the sessions. Conclusion: This novel semi-automatic rotative RF device has been found to provide treatments that are effective, safe and comfortable for both practitioners and subjects. .

Changes in Anatomical Features and Protein Pattern of Sunflower Partially Resistant and Susceptible Lines During Infection By Virulence Factors of Sclerotinia Sclerotiorum

Helianthus annuus L.as an oil seed crop is widely grown throughout the world.One of the most destructive diseases of sunflower is stem rot caused by Sclerotinia sclerotiorum.Oxalic acid is the major virulence factor of this necrotrophic pathogen.It is important to further investigate plant responses to this non-specific toxin.Therefore,in the present study,we compared the patterns of total soluble proteins and xylem morphology of partially resistant and susceptible sunflower lines after treatment with Sclerotinia culture filtrate.The basal stems of both lines were treated with 40 mM oxalic acid(pH 3.7)of fungus culture filtrate and samples were collected at 24,48 and 72 hours post treatment.In SDS-PAGE protein pattern new protein bands appeared in both lines after treatment.These observations suggest induction of stress-related proteins upon culture filtrate treatment.The identities of these new proteins need to be more clarify in future investigations.The changes in xylem morphology and degree of lignification of both lines was studied by light microscopy and microtome sectioning techniques after treatment with S.sclerotiorum culture filtrate.Anatomical investigations revealed changes in xylem diameter and xylem lignification of treated lines at various time points.More lignin deposition in xylem vessels of partially resistant line has been observed after treatment.In addition,the size of xylem vessels in partially resistant line has been sharply decreased upon pathogen filtrate treatment.The results of this study will help us gain a more complete understanding of resistance mechanisms to this cosmopolitan and devastating pathogen.

Unsteady Rotative Flow of Non-Newtonian Fluid in an Annular Pipe

This paper .Studies power law no-Newtonian fluid rotative flow. in an annularpipe. The governing equation is nonlinear one, we linearized the governing equationby assuming that partial factor is at state. With Laplace transform we obtain ananalytical solution of the problem In the paper several groups of curves are given.these curves reflect the temporal change law and. spatial distribution of fluid velocity.In addition.we study the effection of power law index on the flow field the resultindicates that when the power law index n < l. the flow velocity is highly sensitive tothe index. and this fact is importanl in related engineering decisions.

带变系数时间分数阶扩散方程一个新的非协调高阶逼近格式高精度分析新模式

基于时间高阶L2-1_(σ)格式和空间EQ_(1)^(rot)非协调有限元方法,对带有变系数的一类时间分数阶扩散方程进行了高效数值分析.首先,证明全离散逼近格式的解在能量模意义下的无条件稳定性.然后,利用该元的特殊性质,并将插值算子和投影算子相结合,导出了采用传统估计无法导出的超逼近结果.此外,利用插值后处理技术,呈现了整体超收敛估计.最后,借助数值实验,验证了理论分析的正确性.

轮虫对不同营养状态水体的指示效果研究——以上海市水体为例

浮游动物是水生态监测中关注的类群之一,轮虫作为浮游动物的重要组成部分从而受到诸多重视。然而轮虫用于水质和生态环境健康状态评价时却遇到了很多问题。本研究以上海市及周边水体为研究对象,探究3种轮虫指数(Q_(B/T)指数、E/O指数、TSI ROT指数)对水体营养状态的评价效果,分析了轮虫密度、生物量以及多样性指数与水体营养状态的关系。结果表明:①TSI ROT指数、轮虫密度和生物量在指示水体营养状态上有一定的可靠性,但评价效果受季节影响较大。在上海地区TSI ROT指数适合在夏、秋季节使用,不适合在冬、春季节使用。轮虫的密度和生物量在夏季与TLI的关系最为密切,且随着TLI的升高而升高,其中密度对TLI的指示效果优于生物量。Q_(B/T)指数、E/O指数进行水体营养状态评价均存在一定的局限性,两者不适用于四季分明且已普遍处于富营养水平的水体评价。α多样性指数(Shannon指数、Simpson指数、Pielou指数)在水体营养状态各阶段的数值集中范围相差不大,故而在上海地区不适宜根据α多样性各指数划定的范围来判断水体营养程度。②在夏季,生境是影响轮虫指示水体营养状态结果的重要因素。③TSI_(ROTP)与TSI_(ROTD)和TSI_(ROTZH)评价结果的一致性程度较弱,故而在使用TSI ROT指数前应充分了解被评价水体的水文状况,从而提高TSI ROT指数的准确性。

结构参数对领结型纳米孔等离子体光镊共振效应的影响

等离子体光镊可以将光场能量限制在纳米级的体积内,从而产生较大的梯度力对粒子进行捕获和操纵。使用时域有限差分(FDTD)方法对金膜上的领结型纳米孔进行数值分析,结果表明,在波长为400~2 000 nm范围内存在两种模式的共振,分别为Fabry-Pérot共振和等离子体共振。Fabry-Pérot共振对金膜厚度比较敏感,随着金膜厚度增加,共振峰发生90 nm的红移;而等离子体共振峰随着孔径和孔间距的增加向波长更大的方向偏移;通过模拟粒子捕获,发现与其他材料的粒子相比,金粒子会导致等离子体共振峰发生更大的偏移,且随着粒子从结构外运动至结构底部,共振峰会持续发生红移。本研究对实际应用中纳米结构的制备具有参考价值,且在单分子操纵、生物传感等方面具有重要意义。

A novel pathogen Fusarium cuneirostrum causing common bean(Phaseolus vulgaris)root rot in China

Several fungal pathogens cause root rot of common bean,among which Fusarium spp.are the most common pathogens causing Fusarium root rot(FRR)worldwide.FRR has been becoming an increasingly severe disease of common bean in China,but the species of Fusarium spp.have remained unclear.Thus,this study was performed to identify the pathogen causing common bean root rot in Liangcheng County,Inner Mongolia,China.Nineteen Fusarium-like isolates were obtained after pathogen isolation and purification.The pathogenicity test indicated that eight isolates caused severe disease symptoms on common bean,while 11 other isolates were not pathogenic.The eight pathogenic isolates,FCL1–FCL8,were identified as Fusarium cuneirostrum by morphological characterization and phylogenetic analysis using partial sequences of EF-1α,ITS,28S,and IGS regions.Host range test showed that the representative F.cuneirostrum isolate FCL3 was also pathogenic to mung bean,while not pathogenic to adzuki bean,chickpea,cowpea,faba bean,pea,and soybean.Moreover,50 common bean and 50 mung bean cultivars were screened for resistance to FRR,and seven highly resistant or resistant cultivars of common bean were identified,while no resistant cultivars of mung bean were screened.This study revealed that F.cuneirostrum was one of common bean FRR pathogens in Inner Mongolia and it could induce mung bean root rot as well.To our knowledge,this is the first report of F.cuneirostrum causing FRR of common bean in China.

Non-volatile dynamically switchable color display via chalcogenide stepwise cavity resonators

High-resolution multi-color printing relies upon pixelated optical nanostructures,which is crucial to promote color display by producing nonbleaching colors,yet requires simplicity in fabrication and dynamic switching.Antimony trisulfide(Sb_(2)S_(3))is a newly rising chalcogenide material that possesses prompt and significant transition of its optical characteristics in the visible region between amorphous and crystalline phases,which holds the key to color-varying devices.Herein,we proposed a dynamically switchable color printing method using Sb_(2)S_(3)-based stepwise pixelated Fabry-Pérot(FP)cavities with various cavity lengths.The device was fabricated by employing a direct laser patterning that is a less timeconsuming,more approachable,and low-cost technique.As switching the state of Sb_(2)S_(3) between amorphous and crystalline,the multi-color of stepwise pixelated FP cavities can be actively changed.The color variation is due to the profound change in the refractive index of Sb_(2)S_(3) over the visible spectrum during its phase transition.Moreover,we directly fabricated sub-50 nm nano-grating on ultrathin Sb_(2)S_(3) laminate via microsphere 800-nm femtosecond laser irradiation in far field.The minimum feature size can be further decreased down to~45 nm(λ/17)by varying the thickness of Sb_(2)S_(3) film.Ultrafast switchable Sb_(2)S_(3) photonic devices can take one step toward the next generation of inkless erasable papers or displays and enable information encryption,camouflaging surfaces,anticounterfeiting,etc.Importantly,our work explores the prospects of rapid and rewritable fabrication of periodic structures with nano-scale resolution and can serve as a guideline for further development of chalcogenide-based photonics components.

非线性Benjamin-Bona-Mahony-Burgers方程的非协调有限元超收敛分析

文章研究了二维非线性Benjamin-Bona-Mahony-Burgers(BBMB)方程的非协调有限元方法。利用非协调EQ^(rot)_(1)元相容误差比插值误差高一阶的特殊性质,给出了非线性BBMB方程在半离散以及向后Euler全离散格式下的超逼近和整体超收敛结果。最后,通过数值试验验证了理论分析的正确性和方法的有效性。

MZI/FPI Fiber Optic Dual-parameter Sensor Based on a Double Cone and Air Cavity Structure(Invited)

This paper proposes a Mach Zehnder/Fabry Perot Interferometer(MZI/FPI)fiber sensor based on Single-mode Fiber(SMF)and Hollow-core Fiber(HCF),which has high sensitivity to temperature and lateral loads.The proposed device consists of two single-mode fiber cones formed by manually controlling the fusion splicer and an air cavity formed by fusing a section of hollow-core fiber.The structure of the sensor is a double cone cascaded air cavity.At the beginning of the design,we compared the basic transmission spectra of single cone structure and double cone structure experimentally,and therefore chose to use double cone structure and air cavity cascade.Light undergoes its first reflection at the first interface between the single-mode fiber and the air cavity structure,and its second reflection at the second interface between the air cavity structure and the single-mode fiber.The two reflected light waves produced by the two reflections form FP interference,which can be used to measure lateral loads.The transmitted light is excited through the first cone,and a portion of the core mode light is excited to the cladding,while another portion of the core mode light continues to propagate in the core.The light couples at the second cone,and the cladding mode light couples back into the core,forming MZ interference with the core mode light,which can be used to measure temperature.The use of hollow-core fiber to form an air cavity has little effect on transmitted light,while avoiding the problem of crosstalk in dual parameter measurements.By designing temperature and lateral load experiments,this article verifies the sensitivity characteristics of this sensor to temperature and lateral loads.A significant redshift phenomenon was observed in the temperature experiment.A significant redshift phenomenon also occurred in the lateral load experiment.Through wavelength demodulation,the experimental results show that the wavelength sensitivity of the sensor to temperature is 56.29 pm/℃in the range of 30℃to 80℃.The wavelength sensitivity of the sensor to lateral loads is 1.123 nm/N in the range of 0~5 N.In addition,we have prepared multiple sets of fiber optic sensors with this structure and conducted repeated experiments to verify that the sensing performance of this structure of fiber optic sensors for temperature and lateral load is relatively stable.Also,the different waist diameters of cones will have a certain impact on the transmission spectrum of MZ,while the length of the air cavity will also have a certain impact on the reflection spectrum of FP.This article lists some fiber optic sensors for dual parameter measurement of temperature and lateral load.Compared with the listed sensors,the fiber optic sensor proposed in this article has better sensitivity to temperature and lateral load.And the fiber optic sensor proposed in this article has a simple manufacturing process,low production cost,and good performance,which has certain prospects in scientific research and industrial production.

Controllable optical bistability in a Fabry-Pérot cavity with a nonlinear three-dimensional Dirac semimetal

Optical bistability(OB)is capable of rapidly and reversibly transforming a parameter of an optical signal from one state to another,and homologous nonlinear optical bistable devices are core components of high-speed all-optical communication and all-optical networks.In this paper,we theoretically investigated the controllable OB from a Fabry-Pérot(FP)cavity with a nonlinear three-dimensional Dirac semimetal(3D DSM)in the terahertz band.The OB stems from the third-order nonlinear bulk conductivity of the 3D DSM and the resonance mode has a positive effect on the generation of OB.This FP cavity structure is able to tune the OB because the transmittance and the reflectance can be modulated by the Fermi energy of the 3D DSM.We believe that this FP cavity configuration could provide a reference concept for realizing tunable bistable devices.

Genome-wide association mapping and genomic prediction of stalk rot in two mid-altitude tropical maize populations

Maize stalk rot reduces grain yield and quality.Information about the genetics of resistance to maize stalk rot could help breeders design effective breeding strategies for the trait.Genomic prediction may be a more effective breeding strategy for stalk-rot resistance than marker-assisted selection.We performed a genome-wide association study(GWAS)and genomic prediction of resistance in testcross hybrids of 677 inbred lines from the Tuxpe?o and non-Tuxpe?o heterotic pools grown in three environments and genotyped with 200,681 single-nucleotide polymorphisms(SNPs).Eighteen SNPs associated with stalk rot shared genomic regions with gene families previously associated with plant biotic and abiotic responses.More favorable SNP haplotypes traced to tropical than to temperate progenitors of the inbred lines.Incorporating genotype-by-environment(G×E)interaction increased genomic prediction accuracy.

Natural variation in maize gene ZmSBR1 confers seedling resistance to Fusarium verticillioides

Maize seedling blight caused by Fusarium verticillioides is a widely occurring maize disease,but the genetics and mechanisms of resistance are not well understood.In this study,GWAS performed by MLM and 3VmrMLM identified 40 and 20 QTNs,associated with seedling blight resistance.These methods identified 49 and 36 genes,respectively.Functional verification of candidate gene ZmSBR1 identified by both methods showed that the resistance of a mutant line to seedling blight decreased by 0.37 grade points after inoculation with F.verticillioides,compared with the WT.The length of the stem rot lesion caused by F.verticillioides increased by 86%in mutant seedlings,and the relative length of the adult plant stalk rot increased by 35%in mutant plants compared to the wild type after inoculation with Fusarium graminearum.Transcriptome analysis showed that expression of defense-related genes after inoculation was down-regulated in the mutant compared to the wild type,synthesis of secondary metabolites associated with resistance was reduced,and the immune response triggered by PAMP decreased,resulting in decreased resistance of mutant maize seedlings.Candidate gene association analysis showed that most maize inbred lines carried the susceptible haplotype.A functional PCR marker was developed.The results demonstrated that ZmSBR1 conferred resistance to multiple Fusarium diseases at the seedling and adult growth stages and had important application value in breeding.

Effective transmittance of Fabry–Perot cavity under non-parallel beam incidence

The Fabry–Perot(FP) resonant cavity is widely used in laser and spectroscopic measurements due to its unique interference transfer function(ITF). In the ideal case of parallel incident light, the ITF of the FP resonant cavity can be expressed by the Airy function. However, in reality, it is difficult to achieve perfect parallelism with collimated beams. In this article, a theoretical model is established for non-parallel light incidence, which assumes that the non-parallel incident light is a cone-shaped beam, and the cone angle is used to quantify the non-parallelism of the beam. The transmittance function of the FP resonant cavity under non-parallel light incidence is derived. The accuracy of the model is experimentally verified. Based on this model, the effects of divergence angle, tilt angle and FP cavity parameters(reflectivity, cavity length)on the ITF are studied. The reasons for the decrease in peak value, broadening and asymmetry of the interference peak under non-parallel light incidence are explained. It is suggested that a fine balance between the interference peak and the collimation effect of the incident light should be considered in the design and application of FP resonant cavities, especially for tilted applications such as angle-scanned spectroscopy. The research results of this article have certain significance for the design and application of FP resonant cavities.

BBM-Burgers方程的非协调有限元方法的超收敛分析

研究Benjamin-Bona-Mahony-Burgers(BBM-Burgers)方程的非协调EQ_(1)^(rot)元的线性化BDF格式下的超收敛性质。通过使用数学归纳法来处理非线性项,并利用该单元已有的高精度结果及插值后处理技术,得到了在对空间剖分尺度和时间步长无网格比约束的前提下,关于离散H^(1)-模意义下具有O(h^(2)+τ^(2))阶的超逼近和超收敛结果。最后,通过给出数值算例验证了理论分析的正确性。

Damage and Control Suggestions for the Emerging Disease Coffee Root Rot

[Objectives]The paper was to elucidate the symptoms,morphological characteristics,etiological factors,and current extent of damage associated with coffee root rot disease.[Methods]The symptoms,morphological characteristics,and etiological factors associated with coffee root rot disease were systematically observed,described,and analyzed.The assessment of damage was carried out using a specialized investigative methodology.[Results]The application of bottom fertilizer containing Fusarium incarnatum facilitated the pathogen's entry through root wounds during transplantation,resulting in the development of water-soaked depression lesions in the affected areas.This infection significantly reduced the number of lateral roots in coffee plants,leading to symptoms such as wilting,withering,and ultimately,the death of the aboveground foliage.F.incarnatum exhibited three distinct types of spore morphology:macroconidia,which were sickle-shaped;mesoconidia,which were spindle-shaped;and microconidia,which were oval-shaped.The incidence rate of the disease in the affected region reached 100%,with a disease index exceeding 91,indicating severe damage.[Conclusions]This study serves as a valuable reference for the prevention and management of the emerging disease known as coffee root rot.

Influence of Sanitization Process on Maintaining Sweet Potato Quality for Export

The whole cold-chain for exporting sweet potato(native variety“Abees”),to foreign market included immediate curing operation directly after harvest helped in healing skin texture,however,in order to reduce postharvest soft rot(Rhizopus stolonifer)incidence following trimming,and washing,ultraviolet light(UV-C)treatment was used as a main sanitizer for eliminating the soft rot.Exposure of the roots to UV-C(254 nm)was applied in a UV-C room on freshly harvested and cured sweet potato while rolling up on a movable line at 20 cm distance for 1,2,and 3 hr.As combining UV-C treatment with chlorine(200 ppm)on roots,marked and significant reduction of the total microbial load and Rhizopus potential was achieved on root surfaces respectively compared with chlorine alone.It also reduced soft rot percentage to almost 0%infection.After 3 months of cold-storage,quality assessment of sweet potato showed that root characteristics were markedly maintained.The ability of UV-C light to induce phenylalanine ammonia lyase(PAL)enzyme activity in root tissue and maintain the activities of peroxidase and polyphenol oxidase,however with slight increase,was detected.UV-C caused an increase of phenol content in sweet potato tissue that made an activation of defense reaction against the rot causal pathogen.As the exposure time to UV-C light increased,a higher content of phenols occurred.Moreover,UV-C application caused decrease in sugar content of root tissue that is flavored by soft rot-causal pathogen.

Influence of Microorganisms Effective against Basal Rot and on Agronomic Parameters of Onion [Allium cepa L. (Amaryllidaceae)]

Onions are a horticultural crop of great economic, dietary and medicinal importance, and are highly prized by the Ivorian population. However, production remains low, due to a number of constraints, including parasitic attacks. The most frequent is fusariosis caused by Fusarium sp., a pathogen that causes enormous damage to onion crops. Faced with these attacks, chemical control appears to be ineffective, with consequences for human health and the environment. This is why the search for effective alternative methods that respect the environment and human health is so necessary. It is in this context that this study was carried out, with the general aim of controlling fusarium wilt in onion crops, with a view to improving onion production in Ivory Coast through the use of effective microorganisms. The experimental set-up used for this purpose was a fisher block with complete randomization, comprising three replicates. A fungal spore concentration of 106 spore/mL of Fusarium sp., three doses (1%;2.5% and 5% v/v) of EM and one dose of a chemical fungicide (30 mL/16L) were tested on young onion plants. Each block consisted of nine sub-plots with nine treatments. Health parameters (incidence and severity) and agronomic parameters (growth and yield) were assessed. Microbiological analysis of the EM revealed the presence of nine morphotypes of Trichoderma sp., Aspergillus clavatus, Aspergillus flavus, Aspergillus sp., Penicillium sp., Rhizopus sp., lactic acid bacteria of the Bacillus family and the yeast Saccharomyces cerevisiae. Field experimentation showed that the 5% EM microbial solution reduced the incidence and severity of fusariosis compared with the chemical fungicide, and proved to be the best. This dose reduced yield losses by 7.14%, while improving onion growth and yield by over 5%. The results demonstrated the ability of the EM solution to effectively control the causal agent of basal rot in onion crops.

利用GPS对磁暴期间极区TEC变化与极区碎片(Polar Patches)的研究

利用2004年11月6-10日磁暴发生期间南极区域内的中国中山站GPS常年跟踪站（ZHON）和国际GPS服务站（CAS1,MCM4,SYOG,MAW1）的GPS观测数据,计算了可观测卫星传播路径上的TEC和ROT值,进而依据TEC的波动频率和幅度推估出极区碎片的个数,分析了极区磁暴期间电离层响应及其极区碎片特性.最终所得TEC和ROT结果与极区地磁场Dst和Kp指数信息相吻合,如实地反映了磁暴事件和极区碎片的出现.本文所做工作在国内尚未开展,因此所用方法和结论为将来这一方向的研究提供了一定的参考.

Pathogen_resistant Transgenic Plant of Brassica pekinensis by Transfering Antibacterial Peptide Gene and Its Genetic Stability

The soft rot infected by pathogenic bacterium Erwinia aroideae Holland is one of the three serious diseases of Chinese cabbage ( Brassica pekinensis Rupr.). By constructing vector system of high frequency transformation mediated by Agrobacterium tunefaciens EHA105, anti-bacterial peptide gene with strong bactericidal action to pathogenic bacteria was introduced into Chinese cabbage AB-81 self-bred line and the transgenic plants were obtained. PCR and Southern blotting detection showed that target gene was integrated into plant genome of Chinese cabbage. The tests of bacteriostasis action of the extract from transgenic plants in vitro, and the assay of disease-resistant of transgenic plantlets in the tube and the pot by perfusing inoculation with pathogenic bacteria showed obvious resistance to soft rot. This resistance can be a stable heredity by genetic analysis of generations of transgenic plants self-bred, separation ratio of its R, was 3:1. The resistance to Km and disease of soft rot was still kept in the R-5. These results indicated the possibility of breeding new varieties of anti-soft rot Chinese cabbage by transgenic plants as parents.