Permanent magnet flux switching machines(PMFSM)have attracted significant research interest and are considered as competent candidates when higher torque density is primary requirement.However,conventional PMFSMs uses...Permanent magnet flux switching machines(PMFSM)have attracted significant research interest and are considered as competent candidates when higher torque density is primary requirement.However,conventional PMFSMs uses excessive rare earth PM volumes which ultimately increases machine the machine weight and PM cost.Moreover,the PMs extended at the stator yoke results in stator leakage flux which degrades the performance.To suppress the leakage flux and diminish the PM volume,the consequent pole PMFSM(CPPMFSM)with flux bridges and barriers encompassing partitioned circumferential and radial magnetized PMs is proposed,thereby ensuring an alternate magnetic path for the working harmonics which improves the modulation effect and flux distribution.Moreover,the influence of the rotor pole number on seven different rotor structures namely,curved rotor,trapezoidal rotor,wide rotor tooth tip,wide rotor base width,rectangular segmented and eccentric rotors are investigated based on the electromagnetic performance and stress distribution.Finite element analysis(FEA)reveals that the 12S-13P CPPMFSM with a wider rotor base offers comparatively better electromagnetic performance.Compare to the conventional PMFSM,the proposed CPPMFSM reduces the PM volume which minimizes the overall machine cost and weight,suppresses the torque ripples by 16.49%,diminishes total harmonic distortion(THD)by 35.24%and decreases cogging torque by 32.88%.Furthermore,the torque and power density are enhanced by 7.028%and 7.025%respectively.展开更多
Bearingless switched reluctance motor(BSRM) not only combines the merits of bearingless motor(BM) and switched reluctance motor(SRM), but also decreases the vibration and acoustic noise of SRM, so it could be a strong...Bearingless switched reluctance motor(BSRM) not only combines the merits of bearingless motor(BM) and switched reluctance motor(SRM), but also decreases the vibration and acoustic noise of SRM, so it could be a strong candidate for high-speed driving fields. Under the circumstances, a 12/14 BSRM with hybrid stator pole has been proposed due to its high output torque density and excellent decoupling characteristics between torque and suspension force. However, this motor has torque dead-zone, which leads to problems of self-start at some rotor positions and large torque ripple during normal operation. To solve the existing problems in the 12/14 type, an asymmetric rotor pole type BSRM is proposed. The structure and design process of the proposed motor is presented in detail. The characteristics of the proposed motor is analyzed and compared with that of the 12/14 type. Furthermore, prototype of the proposed structure is designed, manufactured and experimented. Finally, simulation and test results are illustrated and analyzed to prove the validity of the proposed structure.展开更多
This study proposes a novel asymmetric rotor pole design for wound field synchronous machines(WFSMs),which can achieve high saliency ratio and also low torque ripple.The key point is the optimal design of the asymmetr...This study proposes a novel asymmetric rotor pole design for wound field synchronous machines(WFSMs),which can achieve high saliency ratio and also low torque ripple.The key point is the optimal design of the asymmetric rotor pole with the inverse-cosine-shaped(ICS)plus reverse 3rd harmonic shaping.The asymmetric rotor pole can help to improve the average output torque by enhancing the saliency ratio.The reverse 3rd harmonic shaping on the rotor pole surface is mainly used to reduce the torque ripple.To certify the effectivity of the proposed design,three-phase 54-slot/6-pole 4.7kW WFSMs with uniform air gap and with non-uniform air gap shaped by the ICS plus optimum reverse 3rd harmonic are utilized as the basic model and referenced model for comparison.For the referenced model,the optimum amplitude of reverse 3rd harmonic is preferred as 1/6.Finally,all electromagnetic characteristics of the investigated machines are predicted by the finite-element method(FEM).The highest saliency ratio and comparatively low torque ripple have been verified.展开更多
In this study,the general optimal stator poles/rotor teeth(P/T)combination equation of the E-core hybrid excitation flux switching(HEFS)machines are introduced,and a new HEFS machine is proposed and optimized.Firstly,...In this study,the general optimal stator poles/rotor teeth(P/T)combination equation of the E-core hybrid excitation flux switching(HEFS)machines are introduced,and a new HEFS machine is proposed and optimized.Firstly,the influences of three different P/T combinations(10/18,10/19,and 10/21)on the HEFS machines are investigated with two-dimensional(2D)finite element analyses(2D-FEA).Meanwhile,the consistency and complementarity principle of the armature windings is analyzed in detail to give reasonable explanations to the simulated results.The general optimal P/T combination equation of the E-core HEFS machines is deduced mathematically to provide an effective guidance on the selection of P/T combinations.The optimal P/T combination calculated by the general equation agrees with the simulated results which confirm the correctness of the mathematical inferences.Finally,the optimizations on the proposed HEFS machine are implemented to obtain higher output torque and better flux-regulation ratio characteristics based on which the cogging torque and torque ripple are reduced significantly.展开更多
文摘Permanent magnet flux switching machines(PMFSM)have attracted significant research interest and are considered as competent candidates when higher torque density is primary requirement.However,conventional PMFSMs uses excessive rare earth PM volumes which ultimately increases machine the machine weight and PM cost.Moreover,the PMs extended at the stator yoke results in stator leakage flux which degrades the performance.To suppress the leakage flux and diminish the PM volume,the consequent pole PMFSM(CPPMFSM)with flux bridges and barriers encompassing partitioned circumferential and radial magnetized PMs is proposed,thereby ensuring an alternate magnetic path for the working harmonics which improves the modulation effect and flux distribution.Moreover,the influence of the rotor pole number on seven different rotor structures namely,curved rotor,trapezoidal rotor,wide rotor tooth tip,wide rotor base width,rectangular segmented and eccentric rotors are investigated based on the electromagnetic performance and stress distribution.Finite element analysis(FEA)reveals that the 12S-13P CPPMFSM with a wider rotor base offers comparatively better electromagnetic performance.Compare to the conventional PMFSM,the proposed CPPMFSM reduces the PM volume which minimizes the overall machine cost and weight,suppresses the torque ripples by 16.49%,diminishes total harmonic distortion(THD)by 35.24%and decreases cogging torque by 32.88%.Furthermore,the torque and power density are enhanced by 7.028%and 7.025%respectively.
基金supported by National Natural Science Foundation of China under Grant 52077141 and 51920105011Young and Middle-Aged Scientific and Technological Innovation Talent Program of Shenyang City of Liaoning Province of China under Grant RC200427。
文摘Bearingless switched reluctance motor(BSRM) not only combines the merits of bearingless motor(BM) and switched reluctance motor(SRM), but also decreases the vibration and acoustic noise of SRM, so it could be a strong candidate for high-speed driving fields. Under the circumstances, a 12/14 BSRM with hybrid stator pole has been proposed due to its high output torque density and excellent decoupling characteristics between torque and suspension force. However, this motor has torque dead-zone, which leads to problems of self-start at some rotor positions and large torque ripple during normal operation. To solve the existing problems in the 12/14 type, an asymmetric rotor pole type BSRM is proposed. The structure and design process of the proposed motor is presented in detail. The characteristics of the proposed motor is analyzed and compared with that of the 12/14 type. Furthermore, prototype of the proposed structure is designed, manufactured and experimented. Finally, simulation and test results are illustrated and analyzed to prove the validity of the proposed structure.
文摘This study proposes a novel asymmetric rotor pole design for wound field synchronous machines(WFSMs),which can achieve high saliency ratio and also low torque ripple.The key point is the optimal design of the asymmetric rotor pole with the inverse-cosine-shaped(ICS)plus reverse 3rd harmonic shaping.The asymmetric rotor pole can help to improve the average output torque by enhancing the saliency ratio.The reverse 3rd harmonic shaping on the rotor pole surface is mainly used to reduce the torque ripple.To certify the effectivity of the proposed design,three-phase 54-slot/6-pole 4.7kW WFSMs with uniform air gap and with non-uniform air gap shaped by the ICS plus optimum reverse 3rd harmonic are utilized as the basic model and referenced model for comparison.For the referenced model,the optimum amplitude of reverse 3rd harmonic is preferred as 1/6.Finally,all electromagnetic characteristics of the investigated machines are predicted by the finite-element method(FEM).The highest saliency ratio and comparatively low torque ripple have been verified.
基金Supported by the National Natural Science Foundation of China under Project 51937006。
文摘In this study,the general optimal stator poles/rotor teeth(P/T)combination equation of the E-core hybrid excitation flux switching(HEFS)machines are introduced,and a new HEFS machine is proposed and optimized.Firstly,the influences of three different P/T combinations(10/18,10/19,and 10/21)on the HEFS machines are investigated with two-dimensional(2D)finite element analyses(2D-FEA).Meanwhile,the consistency and complementarity principle of the armature windings is analyzed in detail to give reasonable explanations to the simulated results.The general optimal P/T combination equation of the E-core HEFS machines is deduced mathematically to provide an effective guidance on the selection of P/T combinations.The optimal P/T combination calculated by the general equation agrees with the simulated results which confirm the correctness of the mathematical inferences.Finally,the optimizations on the proposed HEFS machine are implemented to obtain higher output torque and better flux-regulation ratio characteristics based on which the cogging torque and torque ripple are reduced significantly.