Microscopic and Dynamic Rheological Characteristics of Crumb Rubber Modified Asphalt

A test for crumb rubber modified asphalt containing 20% crumb rubber particles（30 mesh） was performed using a scanning electron microscope（SEM）.The experimental results indicate that the crumb rubber particles are evenly distributed in the asphalt.Shear rate sweep and shear-temperature sweep tests on the crumb rubber modified asphalt at-20-80 ℃ using a dynamic shear rheology（DSR） instrument,were carried out.The tests show that the complex modulus decreases with increasing temperature;at equivalent temperature,higher load frequencies lead to a larger complex modulus,and this value increasingly decreases as the temperature increases;the phase angle increases with temperature and decreases as the load frequency increases.It can be concluded that the rutting resistance limiting temperature of crumb rubber modified asphalt is 78 ℃,and the anti-fatigue limiting temperature is 16 ℃,which shows that the asphalt has preferable rutting resistance characteristics at high temperature,as well as anti-fatigue characteristics.In addition,the complex modulus master curve at different temperatures was plotted according to the time temperature equivalence principle,which allows the study of the dynamic state behavior of crumb rubber modified asphalt at a wide range of load frequency.

Creep Characteristics of Crumb Rubber Modified Asphalt Binder

Crumb rubber modified asphalt containing 20 percent crumb rubber particles of 30 mesh has been examined by Scanning Electron Microscope （SEM） to observe the microcosmic appearance and the characteristic distribution of crumb rubber particles in asphalt. The SEM pictures reveal that the crumb rubber particles distribute evenly in the asphalt and they are compatible well with asphalt. The shear creep test of crumb rubber modified asphalt was carried out at -10 ℃ and 40 ℃ by Dynamic Shear Rheology （DSR）. The shearing deformation at different temperature and creep stiffness modulus curve at loading stage of crumb rubber modified asphalt have been measured. The stiffness modulus of crumb rubber modified asphalt is much temperature sensitive and it decays much quick at the early stage of loading than normal asphalt. The rate of decay of stiffness modulus is slow at the subsequent stage and stiffness modulus approaches to a stable value at the final stage at a higher temperature. In addition, Burgers model is suitable to describe and simulate experimental results of viscoelastic properties of the crumb rubber modified asphalt.

Laboratory investigation on effects of organic montmorillonite on performance of crumb rubber modified asphalt

In this paper,organic montmorillonite(OMMT)was added into crumb rubber modified asphalt(CRMA)to improve its high temperature performance,anti-aging performance and storage stability.The effects of different OMMT content on properties of CRMA were studied.The rutting factor obtained by dynamic shear rheological(DSR)test was adopted to evaluate the high-temperature performance.The creep stiffness and m value determined by the bending beam rheometer(BBR)test were employed to evaluate the low-temperature performance.The softening point,ductility,rutting factor before and after rolling thin film ovens test(RTFOT)and pressure aging vessel test(PAV)were compared to characterize the aging properties.Moreover,the segregation test after being reserved for 48 h and 7 d was conducted,and the softening point and rutting factor of upper and lower layers of segregation pipe were adopted to evaluate the storage stability.The results indicated that the high-temperature performance and anti-aging performance were developed with the increasing content of OMMT,while the low-temperature performance deteriorated.The storage stability was improved with the increasing content of OMMT before the content exceeded 4%,after which the storage stability declined.Taking account of all factors,it is suggested that the optimum content of OMMT is 3%−4%.

Experimental Study of Rubberized Asphalt Emulsion Modified Portland cement concrete

The poor fatigue properties and high rigidity of cement asphalt emulsion treated mis(CETM) have for a long time been problems restricting its further development making it impossible for C-ETMto be used as surface layer materials. In this paper, a new kind of cement asphalt emulsion composite-rubberized asphalt emulsion modified Portland cement concrete (RACC) was proposed, which was formed by dispersing rubberized aSPhalt emulsion coated coarse aggregates into cement mortar matrix. In order to evaluate systematically the performance of RACC, laboratory tests with nearly one thousand SPecimen were conducted for resilient modulus, fatigue properties, ultimate ban and length,abrasion, temperature contraction, and dry shrinkage. The experimental results show that the problems existed in C-ETM have to a great extends been solved by RACc. To verify the field performance and inquire into paving technology, teSt road appearsatlsfactory it is concluded that when thed ape surface laycr of semi-rigid base course, RACC is more for surface layer material than both Portland cement concrete(PCC) and asphalt concrete(AC)

Advances in Aging and Anti-Aging Research on Rubber-Modified Asphalt and Asphalt Mixtures

Waste rubber-modified asphalt has good anti-aging properties and can significantly improve the service life of asphalt pavements. For domestic and foreign scholars of rubber modified asphalt thermal oxygen aging, photo-oxidative aging and water aging some behavioural research, and rubber asphalt aging after the characteristics of the research progress are reviewed. Especially rubber-modified asphalt after light, water and other multi-factor agingsituations, the aging situation is more serious, for rubber-modified asphalt mixture aging, rubber asphalt anti-aging process research and analysis means are still very few, the future research must have more thinking.

On the Damping Properties of Modified Ground Rubber Tires

Large amounts of used rubber tires are discarded annually. A long time is needed for them to degrade naturally. This poses two major problems: environmental pollution and wastage of valuable rubber. On the other hand, with the harm of vibration and noise widely recognized, desires to control them intensify. As an important means of vibration control, viscoelastic damping technology has advanced greatly. The need for cheap and high quality viscoelastic damping materials increases rapidly. This paper made a trial to use ground rubber tire (GRT) recovered from old tires to make damping materials. The GRT is treated specially first. Then it was pressed into slabs and vulcanized. Finally, the product was cut into test samples. An Oberst beam was used to determine the loss factor βand storage modulus E. Results show that the damping materials exhibit good damping α-bility.

The Viscosity-reducing Mechanism of Organic Wax Additive on CRMA

CRMA was prepared by mixing PG 64-22 asphalt with crumb rubber powder of 40 mesh size and 18% by weight of the asphalt. Sasobit, a typical organic wax additive, was selected and added into CRMA. A series of tests, namely, brookfield viscosity, environmental scanning electron microscope（ESEM）, component test, differential scanning calorimeter（DSC）, fourier transform infrared spectroscopy （FTIR） and nuclear magnetic resonance （NMR） were conducted on CRMA with and without organic wax additive, and microcosmic appearance, component content and molecular structure of various asphalt binders were obtained. The test results indicate that the addition of Sasobit~ into CRMA can effectively change the contents of components： the content of asphaltenes increases relatively, while saturates decreases. In addition, the interaction between various components of CRMA is weakened, and the state of equilibrium between the dispersant and dispersed phase is changed at the same time. That is why the viscosity decreases after the organic wax additive is added into CRMA.

Aging properties and aging mechanism of activated waste rubber powder modified asphalt binder based on rheological properties and micro-characterization

The research and development of high-performance pavement materials has been intensified owing to the demand for long-life pavements.This study is performed to develop a novel pavement material using waste rubber powder,waste lubricating by-product(LBP),and asphalt.Subsequently,the aging properties and aging mechanism of activated waste rubber powder modified asphalt(ARMA)are investigated based on its rheological properties and microcharacterization.The rheological results show that,compared with waste rubber powder modified asphalt(RMA),ARMA offers a higher aging resistance and a longer fatigue life.A comparison and analysis of the rheological aging parameters of ARMA and RMA show that LBP activation diminishes the aging sensitivity of ARMA.The microcharacterization result shows that the aging of ARMA may be caused by the fact that LBP-activated waste rubber powder is more reactive and can form a dense colloidal structure with asphalt.Therefore,the evaporation loss of asphalt light components by heat and the damage to the colloidal structure by oxygen during the aging process are impeded,and the thermal-oxidative aging resistance of ARMA is improved.

Caltrans use of scrap tires in asphalt rubber products:a comprehensive review

The California Department of Transportation （Caltrans） has been using scrap tire rubber in asphalt pavements since the 1970s in chip seals and the 1980s in rubberized hot mix asphalt（RHMA）. Both the wet （field blend） and dry processes were used in early trials. Caltrans has also used rubber modified binders containing both crumb rubber modifier and polymer modifier that could be manufactured at a refinery facility, a terminal blend wet process. Since the beginning of this century, Caltrans increased the use of scrap tire rubber in paving projects and invested considerable resources in developing technically sound, cost effective, and environmentally friendly strategies for using scrap tire rubber in roadway applications. By the end of year 2010, approximately 31% of all hot mix asphalt （HMA） placed by Caltrans was rubberized HMA, roughly 1.2 million tons. Caltrans efforts in using asphalt rubber products were also demonstrated in its research and technology development. These included the construction of two full-scale field experiments, five warranty projects, and an accelerated pavement study using a heavy vehicle simulator. Additionally, terminal blend asphalt rubber and rubberized warm mix asphalts began to be experimented on trial basis. This paper provides a comprehensive review of Caltrans experience over four decades with asphalt rubber products. Current practices and future outlook are also discussed.