Rule-based Fault Diagnosis of Hall Sensors and Fault-tolerant Control of PMSM

Hall sensor is widely used for estimating rotor phase of permanent magnet synchronous motor(PMSM). And rotor position is an essential parameter of PMSM control algorithm, hence it is very dangerous if Hall senor faults occur. But there is scarcely any research focusing on fault diagnosis and fault-tolerant control of Hall sensor used in PMSM. From this standpoint, the Hall sensor faults which may occur during the PMSM operating are theoretically analyzed. According to the analysis results, the fault diagnosis algorithm of Hall sensor, which is based on three rules, is proposed to classify the fault phenomena accurately. The rotor phase estimation algorithms, based on one or two Hall sensor(s), are initialized to engender the fault-tolerant control algorithm. The fault diagnosis algorithm can detect 60 Hall fault phenomena in total as well as all detections can be fulfilled in 1/138 rotor rotation period. The fault-tolerant control algorithm can achieve a smooth torque production which means the same control effect as normal control mode (with three Hall sensors). Finally, the PMSM bench test verifies the accuracy and rapidity of fault diagnosis and fault-tolerant control strategies. The fault diagnosis algorithm can detect all Hall sensor faults promptly and fault-tolerant control algorithm allows the PMSM to face failure conditions of one or two Hall sensor(s). In addition, the transitions between health-control and fault-tolerant control conditions are smooth without any additional noise and harshness. Proposed algorithms can deal with the Hall sensor faults of PMSM in real applications, and can be provided to realize the fault diagnosis and fault-tolerant control of PMSM.

Soil Microbial Dynamics Modeling in Fluctuating Ecological Situations by Using Subtractive Clustering and Fuzzy Rule-Based Inference Systems

Microbial population and enzyme activities are the significant indicators of soil strength.Soil microbial dynamics characterize microbial population and enzyme activities.The present study explores the development of efficient predictive modeling systems for the estimation of specific soil microbial dynamics,like rock phosphate solubilization,bacterial population,and ACC-deaminase activity.More specifically,optimized subtractive clustering(SC)and Wang and Mendel's(WM)fuzzy inference systems(FIS)have been implemented with the objective to achieve the best estimation accuracy of microbial dynamics.Experimental measurements were performed using controlled pot experiment using minimal salt media with rock phosphate as sole carbon source inoculated with phosphate solubilizing microorganism in order to estimate rock phosphate solubilization potential of selected strains.Three experimental parameters,including temperature,pH,and incubation period have been used as inputs SC-FIS and WM-FIS.The better performance of the SC-FIS has been observed as compared to the WM-FIS in the estimation of phosphate solubilization and bacterial population with the maximum value of the coefficient of determination(0.9988)2 R=in the estimation of previous microbial dynamics.

Mapping of Freshwater Lake Wetlands Using Object-Relations and Rule-based Inference

Inland freshwater lake wetlands play an important role in regional ecological balance. Hongze Lake is the fourth biggest freshwater lake in China. In the past three decades, there has been significant loss of freshwater wet- lands within the lake and at the mouths of neighboring rivers, due to disturbance, primarily from human activities. The main purpose of this paper was to explore a practical technology for differentiating wetlands effectively from upland types in close proximity to them. In the paper, an integrated method, which combined per-pixel and per-field classifi- cation, was used for mapping wetlands of Hongze Lake and their neighboring upland types. Firstly, Landsat ETM＋ imagery was segmented and classified by using spectral and textural features. Secondly, ETM＋ spectral bands, textural features derived from ETM＋ Pan imagery, relative relations between neighboring classes, shape fea^xes, and elevation were used in a decision tree classification. Thirdly, per-pixel classification results from the decision tree classifier were improved by using classification results from object-oriented classification as a context. The results show that the technology has not only overcome the salt-and-pepper effect commonly observed in the past studies, but also has im- proved the accuracy of identification by nearly 5%.

RTTRS: Rule-based Train Traffic Rescheduling Simulator

Train traffic rescheduling is a complicated and large-scaled combinatorial problem. According to the characteristics of China railway system and from the point of practical use, this paper introduces a rule-based train traffic reschedule interactive simulator. It can be used as a powerful training tool to train the dispatcher and to carry out experimental analysis. The production rules are used as the basic for describing the processes to be simulated. With the increase of rule, users can easily upgrade the simulator by adding their own rules.

Neutrosophic Rule-Based Identity Verification System Based on Handwritten Dynamic Signature Analysis

Identity verification using authenticity evaluation of handwritten signatures is an important issue.There have been several approaches for the verification of signatures using dynamics of the signing process.Most of these approaches extract only global characteristics.With the aim of capturing both dynamic global and local features,this paper introduces a novel model for verifying handwritten dynamic signatures using neutrosophic rule-based verification system(NRVS)and Genetic NRVS(GNRVS)models.The neutrosophic Logic is structured to reflect multiple types of knowledge and relations among all features using three values:truth,indeterminacy,and falsity.These three values are determined by neutrosophic membership functions.The proposed model also is able to deal with all features without the need to select from them.In the GNRVS model,the neutrosophic rules are automatically chosen by Genetic Algorithms.The performance of the proposed system is tested on the MCYT-Signature-100 dataset.In terms of the accuracy,average error rate,false acceptance rate,and false rejection rate,the experimental results indicate that the proposed model has a significant advantage compared to different well-known models.

Multi Layered Rule-Based Technique for Explicit Aspect Extraction from Online Reviews

In the field of sentiment analysis,extracting aspects or opinion targets fromuser reviews about a product is a key task.Extracting the polarity of an opinion is much more useful if we also know the targeted Aspect or Feature.Rule based approaches,like dependency-based rules,are quite popular and effective for this purpose.However,they are heavily dependent on the authenticity of the employed parts-of-speech(POS)tagger and dependency parser.Another popular rule based approach is to use sequential rules,wherein the rules formulated by learning from the user’s behavior.However,in general,the sequential rule-based approaches have poor generalization capability.Moreover,existing approaches mostly consider an aspect as a noun or noun phrase,so these approaches are unable to extract verb aspects.In this article,we have proposed a multi-layered rule-based(ML-RB)technique using the syntactic dependency parser based rules along with some selective sequential rules in separate layers to extract noun aspects.Additionally,after rigorous analysis,we have also constructed rules for the extraction of verb aspects.These verb rules primarily based on the association between verb and opinion words.The proposed multi-layer technique compensates for the weaknesses of individual layers and yields improved results on two publicly available customer review datasets.The F1 score for both the datasets are 0.90 and 0.88,respectively,which are better than existing approaches.These improved results can be attributed to the application of sequential/syntactic rules in a layered manner as well as the capability to extract both noun and verb aspects.

Generating Fuzzy Rule-based Systems from Examples Based on Robust Support Vector Machine

This paper firstly proposes a new support vector machine regression (SVR) with a robust loss function, and designs a gradient based algorithm for implementation of the SVR, then uses the SVR to extract fuzzy rules and designs fuzzy rule-based system. Simulations show that fuzzy rule-based system technique based on robust SVR achieves superior performance to the conventional fuzzy inference method, the proposed method provides satisfactory performance with excellent approximation and generalization property than the existing algorithm.

A Rule-Based Approach for Grey Hole Attack Prediction in Wireless Sensor Networks

The Wireless Sensor Networks(WSN)are vulnerable to assaults due to the fact that the devices connected to them have a reliable connection to the inter-net.A malicious node acts as the controller and uses a grey hole attack to get the data from all of the other nodes in the network.Additionally,the nodes are dis-carding and modifying the data packets according to the requirements of the sys-tem.The assault modifies the fundamental concept of the WSNs,which is that different devices should communicate with one another.In the proposed system,there is a fuzzy idea offered for the purpose of preventing the grey hole attack from making effective communication among the WSN devices.The currently available model is unable to recognise the myriad of different kinds of attacks.The fuzzy engine identified suspicious actions by utilising the rules that were gen-erated to make a prediction about the malicious node that would halt the process.Experiments conducted using simulation are used to determine delay,accuracy,energy consumption,throughput,and the ratio of packets successfully delivered.It stands in contrast to the model that was suggested,as well as the methodologies that are currently being used,and analogue behavioural modelling.In comparison to the existing method,the proposed model achieves an accuracy rate of 45 per-cent,a packet delivery ratio of 79 percent,and a reduction in energy usage of around 35.6 percent.These results from the simulation demonstrate that the fuzzy grey detection technique that was presented has the potential to increase the net-work’s capability of detecting grey hole assaults.

Representing the Knowledge of Public Construction Project Cost Estimator by Using Rule-Based Method

Despite the presence of various construction project cost estimate softwares, human experience and knowledge cannot be disregarded. This fact has been proven in practice, where the success of construction cost estimate process is mainly based on knowledge of human estimator. The main question concerns what human knowledge determines the success of the construction cost estimation process. To address this question we have applied Delphi technique and the output is eleven factors that are enough to precisely represent construction cost estimator knowledge. Then we have used First Order Logic (FOL) to represent these factors in terms of predicates and rules. These FOL rules could be used for evaluating construction cost estimator knowledge in five classes: fail, pass, acceptable, good, and very good. As a validation process we have done experiments using history data and the results have proved the accuracy of our proposed method.

Wedge-shaped HfO_(2) buffer layer-induced field-free spin-orbit torque switching of HfO_(2)/Pt/Co structure

Field-free spin-orbit torque(SOT)switching of perpendicular magnetization is essential for future spintronic devices.This study demonstrates the field-free switching of perpendicular magnetization in an HfO_(2)/Pt/Co/TaO_(x) structure,which is facilitated by a wedge-shaped HfO_(2)buffer layer.The field-free switching ratio varies with HfO_(2)thickness,reaching optimal performance at 25 nm.This phenomenon is attributed to the lateral anisotropy gradient of the Co layer,which is induced by the wedge-shaped HfO_(2)buffer layer.The thickness gradient of HfO_(2)along the wedge creates a corresponding lateral anisotropy gradient in the Co layer,correlating with the switching ratio.These findings indicate that field-free SOT switching can be achieved through designing buffer layer,offering a novel approach to innovating spin-orbit device.

Applying Fuzzy Rule-Based System on FMEA to Assess the Risks on Project-Based Software Engineering Education

Project-based learning has been in widespread use in education. However, project managers are unaware of the students’ lack of experience and treat them as if they were professional staff. This paper proposes the application of a fuzzy failure mode and effects analysis model for project-based software engineering education. This method integrates the fuzzy rule-based system with learning agents. The agents construct the membership function from historical data. Data are processed by a clustering process that facilitates the construction of the membership function. It helps students who lack experience in risk assessment to develop their expertise in that skill. The paper also suggests a classification technique for a fuzzy rule-based system that can be used to judge risk based on a fuzzy inference system. The student project will thus be further enhanced with respect to risk assessment. We then discuss the design of experiments to verify the proposed model.

Applying DNA Computation to Error Detection Problem in Rule-Based Systems

As rule-based systems (RBS) technology gains wider acceptance, the need to create and maintain large knowledge bases will assume greater importance. Demonstrating a rule base to be free from error remains one of the obstacles to the adoption of this technology. In the past several years, a vast body of research has been carried out in developing various graphical techniques such as utilizing Petri Nets to analyze structural errors in rule-based systems, which utilize propositional logic. Four typical errors in rule-based systems are redundancy, circularity, incompleteness, and inconsistency. Recently, a DNA-based computing approach to detect these errors has been proposed. That paper presents algorithms which are able to detect structural errors just for special cases. For a rule base, which contains multiple starting nodes and goal nodes, structural errors are not removed correctly by utilizing the algorithms proposed in that paper and algorithms lack generality. In this study algorithms mainly based on Adleman’s operations, which are able to detect structural errors, in any form that they may arise in rule base, are presented. The potential of applying our algorithm is auspicious giving the operational time complexity of O(n*(Max{q, K, z})), in which n is the number of fact clauses;q is the number of rules in the longest inference chain;K is the number of tubes containing antecedents which are comprised of distinct number of starting nodes;and z denotes the maximum number of distinct antecedents comprised of the same number of starting nodes.

Control method based on DRFNN sliding mode for multifunctional flexible multistate switch

To address the low accuracy and stability when applying classical control theory in distribution networks with distributed generation,a control method involving flexible multistate switches(FMSs)is proposed in this study.This approach is based on an improved double-loop recursive fuzzy neural network(DRFNN)sliding mode,which is intended to stably achieve multiterminal power interaction and adaptive arc suppression for single-phase ground faults.First,an improved DRFNN sliding mode control(SMC)method is proposed to overcome the chattering and transient overshoot inherent in the classical SMC and reduce the reliance on a precise mathematical model of the control system.To improve the robustness of the system,an adaptive parameter-adjustment strategy for the DRFNN is designed,where its dynamic mapping capabilities are leveraged to improve the transient compensation control.Additionally,a quasi-continuous second-order sliding mode controller with a calculus-driven sliding mode surface is developed to improve the current monitoring accuracy and enhance the system stability.The stability of the proposed method and the convergence of the network parameters are verified using the Lyapunov theorem.A simulation model of the three-port FMS with its control system is constructed in MATLAB/Simulink.The simulation result confirms the feasibility and effectiveness of the proposed control strategy based on a comparative analysis.

Tunable Three-Wavelength Fiber Laser and Transient Switching between Three-Wavelength Soliton and Q-Switched Mode-Locked States

We report a passive mode-locked fiber laser that can realize single-wavelength tuning and multi-wavelength spacing tuning simultaneously.The tuning range is from 1528 nm–1560 nm,and up to three bands of soliton states can be output at the same time.These results are confirmed by a nonlinear Schrodinger equation model based on the split-step Fourier method.In addition,we reveal a way to transform the multi-wavelength soliton state into the Q-switched mode-locked state,which is period doubling.These results will promote the development of optical communication,optical sensing and multi-signal pulse emission.

Interpolated Bumpless Transfer Control for Asynchronously Switched Linear Systems

This paper revisits the problem of bumpless transfer control(BTC) for discrete-time nondeterministic switched linear systems. The general case of asynchronous switching is considered for the first time in the field of BTC for switched systems. A new approach called interpolated bumpless transfer control(IBTC) is proposed, where the bumpless transfer controllers are formulated with the combination of the two adjacent modedependent controller gains, and are interpolated for finite steps once the switching is detected. In contrast with the existing approaches, IBTC does not necessarily run through the full interval of subsystems, as well as possesses the time-varying controller gains(with more flexibility and less conservatism) achieved from a control synthesis allowing for the stability and other performance of the whole switched system. Sufficient conditions ensuring stability and H_(∞) performance of the underlying system by IBTC are developed, and numerical examples verify the theoretical findings.

Switching Frequency Improvement of a High Speed on/off Valve Based on Pre-excitation Control Algorithm

The high-speed on/off valve(HSV)serves as the fundamental component responsible for generating discrete fluids within digital hydraulic systems.As the switching frequency of the HSV increases,the properties of the generated discrete fluid approach those of continuous fluids.Therefore,a higher frequency response characteristic of HSV is the key to ensure the control accuracy of digital hydraulic systems.However,the current research mainly focuses on its dynamic performance,but neglect its FRC.This paper presents a theoretical analysis demonstrating that the FRC of the HSV can be enhanced by minimizing its switching time.The maximum switching frequency(MSF)is mainly determined by opening dynamic performance when HSV operates with low switching duty ratio(SDR),whereas the closing dynamic performance limits the MSF when HSV operates with high SDR.Building upon these findings,the pre-excitation control algorithm(PECA)is proposed to reduce the switching time of the HSV,and consequently enhance its FRC.Experimental results demonstrate that PECA shortens the opening delay time of HSV by 1.12 ms,the closing delay time by 2.54 ms,and the closing moving time by 0.47 ms in comparison to the existing advanced control algorithms.As a result,a larger MSF of 417 Hz and a wider controllable SDR range from 20%to 70%were achieved at a switching frequency of 250 Hz.Thus,the proposed PFCA in this paper has been verified as an effective and promising approach for enhancing the control performance of digital hydraulic systems.

Iron regulatory protein 1: the deadly switch of ferroptosis

Ferroptosis,an iron-dependent cell death:Ferroptosis is a type of regulated necrosis,characterized by redox-active iron accumulation and increased free radical production derived by Fenton chemistry,that triggers oxidation of polyunsaturated fatty acids in phospholipids,loss of cellular membranes integrity,and leakage of intracellular contents.

Review of Three-phase Soft Switching Inverters and Challenges for Motor Drives

For electric vehicles (EVs),it is necessary to improve endurance mileage by improving the efficiency.There exists a trend towards increasing the system voltage and switching frequency,contributing to improve charging speed and power density.However,this trend poses significant challenges for high-voltage and high-frequency motor controllers,which are plagued by increased switching losses and pronounced switching oscillations as consequences of hard switching.The deployment of soft switching technology presents a viable solution to mitigate these issues.This paper reviews the applications of soft switching technologies for three-phase inverters and classifies them based on distinct characteristics.For each type of inverter,the advantages and disadvantages are evaluated.Then,the paper introduces the research progress and control methods of soft switching inverters (SSIs).Moreover,it presents a comparative analysis among the conventional hard switching inverters (HSIs),an active clamping resonant DC link inverter (ACRDCLI) and an auxiliary resonant commuted pole inverter (ARCPI).Finally,the problems and prospects of soft switching technology applied to motor controllers for EVs are put forward.

Recent advancements in continuously scalable conversion-ratio switched-capacitor converter

Switched-capacitor(SC)DC-DC converter[1]is an impor-tant alternative to inductive DC-DC converter,in terms of removing the bulky power inductor.Hence,it is widely used in low-profile,low-power applications,such as the internet of things(IoT)sensor nodes and energy harvesting[2].Mean-while,considering that capacitor has a much higher energy density than inductor,high-power applications.

An LED-Side-Pumped Intracavity Frequency-Doubled Nd,Ce:YAG Laser Producing a 2W Q-Switched Red Beam

We report a high-average-power acousto-optic(AO)Q-switched intracavity frequency-doubled red laser based on a high-efficiency light-emitting-diode(LED)pumped two-rod Nd,Ce:YAG laser module.Under quasi-continuous wave operation conditions,a maximum output power of 1319.08 nm wavelength was achieved at 11.26 W at a repetition rate of 100 Hz.