In this study,sulfur-doped TiO2 /Ti photoelectrodes were prepared by anodization. The morphology, crystalline structure,composition of sulfur-doped TiO2 /Ti film and light absorption property were examined by SEM,XRD,...In this study,sulfur-doped TiO2 /Ti photoelectrodes were prepared by anodization. The morphology, crystalline structure,composition of sulfur-doped TiO2 /Ti film and light absorption property were examined by SEM,XRD,XRF,XPS and UV/VIS respectively. Dimethyl phthalate( DMP) ,one kind of environmental disrupting chemicals( EDCs) ,was degraded by the optimized photoelectrodes. Power of xenon light,initial concentration of DMP,photoelectrocatalytic( PEC) area of photoelectrode and bias were investigated in the study on kinetics of PEC degradation of DMP. Hence,this study concluded that the optimum conditions were power of xenon light 150 W,initial concentration of DMP 1 mg/L,PEC area of sulfur-doped TiO2 /Ti photoelectrode 10 cm2,bias 1. 3 V in the PEC reaction system.展开更多
The preparation and study of supported TiO2 for photocatalytic application in solar cell devices is a relevant research field. Thin films of TiO2 prepared on Ti by thermal oxidation in a wide range of temperatures (45...The preparation and study of supported TiO2 for photocatalytic application in solar cell devices is a relevant research field. Thin films of TiO2 prepared on Ti by thermal oxidation in a wide range of temperatures (450°C - 900°C) were characterized by electrochemical impedance spectroscopy, potentiometry and amperometry. This material presents photoelectrochemical activity, which depends dramatically of the oxidation temperature and the exposition time at the studied temperatures. The flatband potential as well as the donor density and the resistance to the charge transfer were measured. All these parameters are temperature dependent, and the optimal values are observed on the photoelectrodes prepared at 750°C. This result is consistent with the photochemical response reported in the literature for thin films of Ti/TiO2 prepared under similar conditions.展开更多
The method of Ti/TiO2-NiO photoelectrode prepared by using sol-gel method continued by calcination process was introduced. The prepared TiO2-NiO film was observed with XRD and TEM. The anatase-rutile TiO2 was mainly o...The method of Ti/TiO2-NiO photoelectrode prepared by using sol-gel method continued by calcination process was introduced. The prepared TiO2-NiO film was observed with XRD and TEM. The anatase-rutile TiO2 was mainly on the prepared TiO2-NiO composite surface electrode. In addition to NiO, the composite also formed NiTiO3 that increased with increasing calcination temperature. Photoelectrocatalytic degradation of Rhodamine B (RB) using this electrode was investigated, and anodic potential and pH were optimized. RB degradation was investigated under different conditions, and it showed that photoelectrocatalytic degradation could achieve efficient and complete mineralization of organic pollutant. Through comparison of the photoelectrocatalytic oxidation using the Ti/TiO2-NiO electrode operated by single photoanode with the Ti/TiO2-NiO electrode operated by several photoanode, it was found that the photoelectrocatalytic efficiency of that by series photoanodes was higher. Additionally, photoelectrocatalytic system was performed at the several different photoelectrodes, which verified the higher photocatalytic activity compared with the single photoelectrode.展开更多
基金Sponsored by the National Natural Science Foundation of China ( Grant No 50678044)
文摘In this study,sulfur-doped TiO2 /Ti photoelectrodes were prepared by anodization. The morphology, crystalline structure,composition of sulfur-doped TiO2 /Ti film and light absorption property were examined by SEM,XRD,XRF,XPS and UV/VIS respectively. Dimethyl phthalate( DMP) ,one kind of environmental disrupting chemicals( EDCs) ,was degraded by the optimized photoelectrodes. Power of xenon light,initial concentration of DMP,photoelectrocatalytic( PEC) area of photoelectrode and bias were investigated in the study on kinetics of PEC degradation of DMP. Hence,this study concluded that the optimum conditions were power of xenon light 150 W,initial concentration of DMP 1 mg/L,PEC area of sulfur-doped TiO2 /Ti photoelectrode 10 cm2,bias 1. 3 V in the PEC reaction system.
文摘The preparation and study of supported TiO2 for photocatalytic application in solar cell devices is a relevant research field. Thin films of TiO2 prepared on Ti by thermal oxidation in a wide range of temperatures (450°C - 900°C) were characterized by electrochemical impedance spectroscopy, potentiometry and amperometry. This material presents photoelectrochemical activity, which depends dramatically of the oxidation temperature and the exposition time at the studied temperatures. The flatband potential as well as the donor density and the resistance to the charge transfer were measured. All these parameters are temperature dependent, and the optimal values are observed on the photoelectrodes prepared at 750°C. This result is consistent with the photochemical response reported in the literature for thin films of Ti/TiO2 prepared under similar conditions.
文摘The method of Ti/TiO2-NiO photoelectrode prepared by using sol-gel method continued by calcination process was introduced. The prepared TiO2-NiO film was observed with XRD and TEM. The anatase-rutile TiO2 was mainly on the prepared TiO2-NiO composite surface electrode. In addition to NiO, the composite also formed NiTiO3 that increased with increasing calcination temperature. Photoelectrocatalytic degradation of Rhodamine B (RB) using this electrode was investigated, and anodic potential and pH were optimized. RB degradation was investigated under different conditions, and it showed that photoelectrocatalytic degradation could achieve efficient and complete mineralization of organic pollutant. Through comparison of the photoelectrocatalytic oxidation using the Ti/TiO2-NiO electrode operated by single photoanode with the Ti/TiO2-NiO electrode operated by several photoanode, it was found that the photoelectrocatalytic efficiency of that by series photoanodes was higher. Additionally, photoelectrocatalytic system was performed at the several different photoelectrodes, which verified the higher photocatalytic activity compared with the single photoelectrode.
