We report the discovery of TiO_(2)-Ⅱ in the unmelted rock of the shocked Suizhou L6 chondrite.Natural TiO_(2)-Ⅱ was previously found in ultrahigh-pressure metamorphic and mantle-derived rocks,terrestrial impact stru...We report the discovery of TiO_(2)-Ⅱ in the unmelted rock of the shocked Suizhou L6 chondrite.Natural TiO_(2)-Ⅱ was previously found in ultrahigh-pressure metamorphic and mantle-derived rocks,terrestrial impact structures,and tektite.Our microscopic,Raman spectroscopic,electron microprobe and transmission electron microscopic investigations have revealed:(1) All observed TiO_(2)-Ⅱ grains are related with ilmenite and pyrophanite;(2) TiO_(2)-Ⅱ occurs as needle-and leaf-shaped inclusions in llmenite and patch-,tape-shaped body in pyrophanite;(3)The composition of TiO_(2)-Ⅱ is identical with that of its precursor rutile;(4) The Raman spectrum of TiO_(2)-Ⅱ is in good agreement with that of natural and synthesized α-PbO_(2)-type TiO_(2);(5) TiO_(2)-Ⅱ occurs mainly in the form of well-ordered nano-domains and small mis-orientation among the domains can be observed.(6) All electron diffraction reflections from TiO_(2)-Ⅱ can be indexed to α-PbO_(2)structure in space group Pbcn with lattice parameters of a=4.481 ?,b=5.578 A and c=4.921 A;(7) The exsolution inclusions of rutile from host ilmenite are mostly connected with an alternation process along the lamellar twinning plane of ilmenite induced by shockinduced high pressure and high temperature;(8) The P-T regime of 20-25 GPa and 1000 ℃ estimated for the Suizhou unmelted rock is suitable for phase transition of rutile into TiO_(2)-Ⅱ phase.展开更多
The systematic trends of electrionic structure and optical properties of rutile （P42/mnm） RuO2 have been cal- culated by using the plane-wave norm-conserving pseudopotential density functional theory （DFT） method ...The systematic trends of electrionic structure and optical properties of rutile （P42/mnm） RuO2 have been cal- culated by using the plane-wave norm-conserving pseudopotential density functional theory （DFT） method within the generalised gradient approximation （GGA） for the exchange-correlation potential. The obtained equilibrium structure parameters are in excellent agreement with the experimental data. The calculated bulk modulus and elastic constants are also in good agreement with the experimental data and available theoretical calculations. Analysis based on elec- tronic structure and pseudogap reveals that the bonding nature in RuO2 is a combination of covalent, ionic and metallic bonds. Based on a Kramers Kronig analysis of the reflectivity, we have obtained the spectral dependence of the real and imaginary parts of the complex dielectric constant （~1 and z2, respectively） and the refractive index （n）; and comparisons have shown that the theoretical results agree well with the experimental data as well. Meanwhile, we have also calculated the absorption coefficient, reflectivity index, electron energy loss function of RuO2 for radiation up to 30 eV. As a result, the predicted reflectivity index is in good agreement with the experimental data at low energies.展开更多
The laser ablation technique was employed to prepare TiO2 nanoparticles by pulsed laser ablation of a titanium target immersed in the poly-(vinylpyrrolidone) solution using wavelength of 1 064 nm. The as-prepared prod...The laser ablation technique was employed to prepare TiO2 nanoparticles by pulsed laser ablation of a titanium target immersed in the poly-(vinylpyrrolidone) solution using wavelength of 1 064 nm. The as-prepared products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The results indicate that the rutile TiO2 nanoparticles are synthesized at room temperature and the average size is about 35 nm with narrow size distribution. A possible formation mechanism was discussed and the UV-vis absorption and photoluminescence were measured. The optical study shows that rutile nanoparticle possesses direct optical transition with band gap of 3.15 eV.展开更多
In this work, structural and optical properties of the TiO2 films deposited on unheated substrates by dual cathode dc unbalanced magnetron sputtering at long substrate-target distance (ds-t) were studied. Titanium dio...In this work, structural and optical properties of the TiO2 films deposited on unheated substrates by dual cathode dc unbalanced magnetron sputtering at long substrate-target distance (ds-t) were studied. Titanium dioxide (TiO2) thin films were deposited on unheated Si (110) wafers, glass slides and carbon coated copper grids at different substrate to target (ds-t) distances. The structural properties of TiO2 thin films were characterized by X-ray diffraction (XRD) and transmission electron microcopy (TEM) with selected-area electron diffraction (SAED), surface morphology using atomic force microscopy (AFM) and optical transmission spectra using a spectrophotometer. XRD results show that TiO2 films deposited at various ds-t distances have only rutile crystal structure. The crystallinity and thickness of the films increased while the roughness decreased with decreasing ds-t distance. The refractive indices of the deposited films were found to be in the range of 2.51 - 2.82 and increased with decreasing ds-t distance.展开更多
Based on first-principles calculations, the electronic and magnetic properties of undoped and Li-doped rutile TiO2 have been studied. The results demonstrate that a cation vacancy can arouse ferromagnetism in TiO2 and...Based on first-principles calculations, the electronic and magnetic properties of undoped and Li-doped rutile TiO2 have been studied. The results demonstrate that a cation vacancy can arouse ferromagnetism in TiO2 and the magnetic moment mainly comes from p orbitals of O atoms around the Ti vacancy. However, the Ti vacancy under normal conditions is very difficult to form due to its high formation energy. Our calculations indicate that Li-doped TiO2 can reduce the formation energy while keeping the magnetism. The large magnetization energy indicates that Li-doped TiO2 is a promising room-temperature diluted magnetic semiconductor.展开更多
The surface of nano-TiO_2 was encapsulated with hydroxyl-propyl-methyl cellulose(HPMC),and then cograftedwith acrylates.Conditions of absorbing and grafting have been studied.Modified nano-TiO_2 particles were charact...The surface of nano-TiO_2 was encapsulated with hydroxyl-propyl-methyl cellulose(HPMC),and then cograftedwith acrylates.Conditions of absorbing and grafting have been studied.Modified nano-TiO_2 particles were characterized byFT-IR spectra,TEM and TG analysis.It was convinced from FT-IR studies that both methyl methacrylate(MMA)and butyl-methacrylate(BMA)were co-grafted onto the surface of nano-TiO_2 particles.TEM images show that the surface of nano-TiO_2 particles was successfully modified by a thick layer of film-like polymer.TG results demonstrate that the decompositiontemperature of HPMC-g-PMMA/PBMA,which has been grafted onto the surface of nano-TiO_2,is 56.9 K higher than that ofHPMC-g-PMMA/PBMA.展开更多
The nano-TiO_2 particles were prepared by liquid hydrolysis method and characterized using XRD. Its antibacterial activity against two representative bacterial, Escherichia eoli and Staphylococcus aureus, was also stu...The nano-TiO_2 particles were prepared by liquid hydrolysis method and characterized using XRD. Its antibacterial activity against two representative bacterial, Escherichia eoli and Staphylococcus aureus, was also studied. The experimental results showed that the nano-TiO_2 caleinated at 600-700℃ contained the obvious anatase phase and exerted exeeUent antibacterial activity. The feature of antibacterial activity of nano- TiO_2 was non-strains specificity and exerted best antibacterial activity at concentration of 0.8 g/L.展开更多
Nano-F-/Ce3+/TiO2 particles were prepared by hydrolysis of tetrabutyl titanate in a mixed CF3COOH-Ce(NO3)3-H2O solution. The photocatalytic decomposition of methylene blue in aqueous solution was used to evaluate thei...Nano-F-/Ce3+/TiO2 particles were prepared by hydrolysis of tetrabutyl titanate in a mixed CF3COOH-Ce(NO3)3-H2O solution. The photocatalytic decomposition of methylene blue in aqueous solution was used to evaluate their photocatalytic activities. The powders were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersion X-ray spectrum (EDS), and Brunauer-Emmett-Teller (BET) surface area analysis. The results showed that F- and Ce3+ were doped into TiO2. The appropriate content of fluorine and cerium were 2.0% and 1.0% (atom fraction) respectively. The codoped nano-F-/Ce3+/TiO2 particles had higher BET specific surface area, smaller crystallite size and higher photocatalytic activity than those of undoped TiO2 particles.展开更多
Nanoparticles have been widely used in polymer gel systems in recent years to improve gelation performance under high-temperature reservoir conditions. However, different types of nanoparticles have different effects ...Nanoparticles have been widely used in polymer gel systems in recent years to improve gelation performance under high-temperature reservoir conditions. However, different types of nanoparticles have different effects on their gelation performance, which has been little researched. In this study, the high-temperature gelation performance, chemical structure, and microstructure of polymer gels prepared from two nanomaterials (i.e., nano-SiO_(2) and nano-TiO_(2)) were measured. The conventional HPAM/PEI polymer gel system was employed as the control sample. Results showed that the addition of nano-TiO_(2) could significantly enhance the gel strength of HPAM/PEI gel at 80 ℃. The gel strength of the enhanced HPAM/PEI gel with 0.1 wt% nano-TiO_(2) could reach grade I. The system also had excellent high-temperature stability at 150 ℃. The enhanced HPAM/PEI gel with 0.02 wt% nano-TiO_(2) reached the maximum gel strength at 150 ℃ with a storage modulus (G′) of 15 Pa, which can meet the need for efficient plugging. However, the nano-SiO_(2) enhanced HPAM/PEI polymer gel system showed weaker gel strength than that with nano-TiO_(2) at both 80 and 150 ℃ with G′ lower than 5 Pa. Microstructures showed that the nano-TiO_(2) enhanced HPAM/PEI gel had denser three-dimensional (3D) mesh structures, which makes the nano-TiO_(2) enhanced HPAM/PEI gel more firmly bound to water. The FT-IR results also confirmed that the chemical structure of the nano-TiO_(2) enhanced HPAM/PEI gel was more thermally stable than nano-SiO_(2) since there was a large amount of –OH groups on the structure surface. Therefore, nano-TiO_(2) was more suitable as the reinforcing material for HPAM/PEI gels for high-temperature petroleum reservoir conformance improvement.展开更多
文摘We report the discovery of TiO_(2)-Ⅱ in the unmelted rock of the shocked Suizhou L6 chondrite.Natural TiO_(2)-Ⅱ was previously found in ultrahigh-pressure metamorphic and mantle-derived rocks,terrestrial impact structures,and tektite.Our microscopic,Raman spectroscopic,electron microprobe and transmission electron microscopic investigations have revealed:(1) All observed TiO_(2)-Ⅱ grains are related with ilmenite and pyrophanite;(2) TiO_(2)-Ⅱ occurs as needle-and leaf-shaped inclusions in llmenite and patch-,tape-shaped body in pyrophanite;(3)The composition of TiO_(2)-Ⅱ is identical with that of its precursor rutile;(4) The Raman spectrum of TiO_(2)-Ⅱ is in good agreement with that of natural and synthesized α-PbO_(2)-type TiO_(2);(5) TiO_(2)-Ⅱ occurs mainly in the form of well-ordered nano-domains and small mis-orientation among the domains can be observed.(6) All electron diffraction reflections from TiO_(2)-Ⅱ can be indexed to α-PbO_(2)structure in space group Pbcn with lattice parameters of a=4.481 ?,b=5.578 A and c=4.921 A;(7) The exsolution inclusions of rutile from host ilmenite are mostly connected with an alternation process along the lamellar twinning plane of ilmenite induced by shockinduced high pressure and high temperature;(8) The P-T regime of 20-25 GPa and 1000 ℃ estimated for the Suizhou unmelted rock is suitable for phase transition of rutile into TiO_(2)-Ⅱ phase.
基金supported by the China Scholarship Council (CSC) and the National Natural Science Foundation of China (Grant Nos. 10676025 and 10574096)the Science-Technology Foundation for Young Scientist of Sichuan Province,China (Grant No. 09ZQ026-049)
文摘The systematic trends of electrionic structure and optical properties of rutile （P42/mnm） RuO2 have been cal- culated by using the plane-wave norm-conserving pseudopotential density functional theory （DFT） method within the generalised gradient approximation （GGA） for the exchange-correlation potential. The obtained equilibrium structure parameters are in excellent agreement with the experimental data. The calculated bulk modulus and elastic constants are also in good agreement with the experimental data and available theoretical calculations. Analysis based on elec- tronic structure and pseudogap reveals that the bonding nature in RuO2 is a combination of covalent, ionic and metallic bonds. Based on a Kramers Kronig analysis of the reflectivity, we have obtained the spectral dependence of the real and imaginary parts of the complex dielectric constant （~1 and z2, respectively） and the refractive index （n）; and comparisons have shown that the theoretical results agree well with the experimental data as well. Meanwhile, we have also calculated the absorption coefficient, reflectivity index, electron energy loss function of RuO2 for radiation up to 30 eV. As a result, the predicted reflectivity index is in good agreement with the experimental data at low energies.
基金Project(09R23) supported by the Scientific Research Starting Foundation of Nantong UniversityProjects(50671100, 10604055) supported by the National Natural Science Foundation of China
文摘The laser ablation technique was employed to prepare TiO2 nanoparticles by pulsed laser ablation of a titanium target immersed in the poly-(vinylpyrrolidone) solution using wavelength of 1 064 nm. The as-prepared products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The results indicate that the rutile TiO2 nanoparticles are synthesized at room temperature and the average size is about 35 nm with narrow size distribution. A possible formation mechanism was discussed and the UV-vis absorption and photoluminescence were measured. The optical study shows that rutile nanoparticle possesses direct optical transition with band gap of 3.15 eV.
文摘In this work, structural and optical properties of the TiO2 films deposited on unheated substrates by dual cathode dc unbalanced magnetron sputtering at long substrate-target distance (ds-t) were studied. Titanium dioxide (TiO2) thin films were deposited on unheated Si (110) wafers, glass slides and carbon coated copper grids at different substrate to target (ds-t) distances. The structural properties of TiO2 thin films were characterized by X-ray diffraction (XRD) and transmission electron microcopy (TEM) with selected-area electron diffraction (SAED), surface morphology using atomic force microscopy (AFM) and optical transmission spectra using a spectrophotometer. XRD results show that TiO2 films deposited at various ds-t distances have only rutile crystal structure. The crystallinity and thickness of the films increased while the roughness decreased with decreasing ds-t distance. The refractive indices of the deposited films were found to be in the range of 2.51 - 2.82 and increased with decreasing ds-t distance.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11005049 and 61006051)
文摘Based on first-principles calculations, the electronic and magnetic properties of undoped and Li-doped rutile TiO2 have been studied. The results demonstrate that a cation vacancy can arouse ferromagnetism in TiO2 and the magnetic moment mainly comes from p orbitals of O atoms around the Ti vacancy. However, the Ti vacancy under normal conditions is very difficult to form due to its high formation energy. Our calculations indicate that Li-doped TiO2 can reduce the formation energy while keeping the magnetism. The large magnetization energy indicates that Li-doped TiO2 is a promising room-temperature diluted magnetic semiconductor.
基金This work was funded by the Natural Science Fund of Anhui Educational Committeethe Youth Fund of Anhui Normal University.
文摘The surface of nano-TiO_2 was encapsulated with hydroxyl-propyl-methyl cellulose(HPMC),and then cograftedwith acrylates.Conditions of absorbing and grafting have been studied.Modified nano-TiO_2 particles were characterized byFT-IR spectra,TEM and TG analysis.It was convinced from FT-IR studies that both methyl methacrylate(MMA)and butyl-methacrylate(BMA)were co-grafted onto the surface of nano-TiO_2 particles.TEM images show that the surface of nano-TiO_2 particles was successfully modified by a thick layer of film-like polymer.TG results demonstrate that the decompositiontemperature of HPMC-g-PMMA/PBMA,which has been grafted onto the surface of nano-TiO_2,is 56.9 K higher than that ofHPMC-g-PMMA/PBMA.
基金Funded by the Research Fund of Key Laboratory for Advanced Technology in Environmental Protection of Jiangsu Province(No.AE201037the Foundation for Talent Recruitment of Yancheng Institute of Technology(No.XKR2011007)
文摘The nano-TiO_2 particles were prepared by liquid hydrolysis method and characterized using XRD. Its antibacterial activity against two representative bacterial, Escherichia eoli and Staphylococcus aureus, was also studied. The experimental results showed that the nano-TiO_2 caleinated at 600-700℃ contained the obvious anatase phase and exerted exeeUent antibacterial activity. The feature of antibacterial activity of nano- TiO_2 was non-strains specificity and exerted best antibacterial activity at concentration of 0.8 g/L.
基金the Natural Science Foundation of Hebei Province (203364)the Natural Science Foundation of Hebei University of Science and Technology (XL2006038)
文摘Nano-F-/Ce3+/TiO2 particles were prepared by hydrolysis of tetrabutyl titanate in a mixed CF3COOH-Ce(NO3)3-H2O solution. The photocatalytic decomposition of methylene blue in aqueous solution was used to evaluate their photocatalytic activities. The powders were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersion X-ray spectrum (EDS), and Brunauer-Emmett-Teller (BET) surface area analysis. The results showed that F- and Ce3+ were doped into TiO2. The appropriate content of fluorine and cerium were 2.0% and 1.0% (atom fraction) respectively. The codoped nano-F-/Ce3+/TiO2 particles had higher BET specific surface area, smaller crystallite size and higher photocatalytic activity than those of undoped TiO2 particles.
基金supported by the Natural Science Foundation of Xinjiang Uygur Autonomous Region(No.2022D01A250)the CNPC Strategic Cooperation Science and Technology Project(ZLZX2020-01-04-04).
文摘Nanoparticles have been widely used in polymer gel systems in recent years to improve gelation performance under high-temperature reservoir conditions. However, different types of nanoparticles have different effects on their gelation performance, which has been little researched. In this study, the high-temperature gelation performance, chemical structure, and microstructure of polymer gels prepared from two nanomaterials (i.e., nano-SiO_(2) and nano-TiO_(2)) were measured. The conventional HPAM/PEI polymer gel system was employed as the control sample. Results showed that the addition of nano-TiO_(2) could significantly enhance the gel strength of HPAM/PEI gel at 80 ℃. The gel strength of the enhanced HPAM/PEI gel with 0.1 wt% nano-TiO_(2) could reach grade I. The system also had excellent high-temperature stability at 150 ℃. The enhanced HPAM/PEI gel with 0.02 wt% nano-TiO_(2) reached the maximum gel strength at 150 ℃ with a storage modulus (G′) of 15 Pa, which can meet the need for efficient plugging. However, the nano-SiO_(2) enhanced HPAM/PEI polymer gel system showed weaker gel strength than that with nano-TiO_(2) at both 80 and 150 ℃ with G′ lower than 5 Pa. Microstructures showed that the nano-TiO_(2) enhanced HPAM/PEI gel had denser three-dimensional (3D) mesh structures, which makes the nano-TiO_(2) enhanced HPAM/PEI gel more firmly bound to water. The FT-IR results also confirmed that the chemical structure of the nano-TiO_(2) enhanced HPAM/PEI gel was more thermally stable than nano-SiO_(2) since there was a large amount of –OH groups on the structure surface. Therefore, nano-TiO_(2) was more suitable as the reinforcing material for HPAM/PEI gels for high-temperature petroleum reservoir conformance improvement.
