Optimization of Plasma Etching Parameters and Mask for Silica Optical Waveguides

Optical waveguides in silica-on-silicon are one of the key elements in optical communications.The processes of deep etching silica waveguides using resist and metal masks in RIE plasma are investigated.The etching responses,including etching rate and selectivity as functions of variation of parameters,are modeled with a 3D neural network.A novel resist/metal combined mask that can overcome the single-layer masks’ limitations is developed for enhancing the waveguides deep etching and low-loss optical waveguides are fabricated at last.

Multimode Interference Optical Power Splitter in Proton-Exchange LiNbO_3 Waveguides

The self imaging effect in graded index waveguides using annealed proton exchange (APE) technique in lithium niobate (LiNbO 3) waveguides is analyzed and simulated using the three dimensional nonparaxial beam propagation method (BPM).On this basis,a 1×8 multimode interference (MMI) optical power splitter by APE technique in X cut LiNibO 3 with Y propagation substrate is fabricated.Measurements show that the device has realized eight powers splittings.

Asymptotic analysis on bright solitons and breather solutions of a generalized higher-order nonlinear Schrödinger equation in an optical fiber or a planar waveguide

We study a generalized higher-order nonlinear Schr¨odinger equation in an optical fiber or a planar waveguide.We obtain the Lax pair and N-fold Darboux transformation(DT)with N being a positive integer.Based on Lax pair obtained by us,we derive the infinitely-many conservation laws.We give the bright one-,two-,and N-soliton solutions,and the first-,second-,and Nth-order breather solutions based on the N-fold DT.We conclude that the velocities of the bright solitons are influenced by the distributed gain function,g(z),and variable coefficients in equation,h1(z),p1(z),r1(z),and s1(z)via the asymptotic analysis,where z represents the propagation variable or spatial coordinate.We also graphically observe that:the velocities of the first-and second-order breathers will be affected by h1(z),p1(z),r1(z),and s1(z),and the background wave depends on g(z).

Retinal capillary plexus in Parkinson’s disease using optical coherence tomography angiography

AIM:To evaluate the alterations of the retinal microvasculature and foveal avascular zone in patients with Parkinson’s disease(PD)using optical coherence tomography angiography(OCT-A).METHODS:A retrospective study of PD patients examined in the Ophthalmology Department of the General Hospital of Athens,“Georgios Gennimatas”from March 2021 to March 2022 was conducted.Totally 44 patients with PD were included and 18 healthy controls were examined,hence a total of 124 eyes were enrolled in the study.The foveal and parafoveal superficial and deep capillary plexus vascular density(fSCP-VD,fDCP-VD,pSCP-VD,pDCP-CD)and foveal avascular zone(FAZ)were quantified with OCTA.Optical coherence tomography(OCT)was used to measure macular thickness.Our statistical analysis was conducted by using a mixed effect linear regression model.RESULTS:After adjustment for age and gender,the mean parafoveal superficial capillary plexus vascular density(pSCP-VD)and mean parafoveal deep capillary plexus vascular density(pDCP-VD)were significantly decreased in individuals with PD(P<0.001 in both)by-2.35(95%CI-3.3,-1.45)and-7.5(95%CI-10.4,-4.6)respectively.fSCP-VD and fDCP-VD didn’t approach statistical significance.The FAZ area and perimeter were significantly decreased(P<0.001 in both)by-0.1 mm^(2)(95%CI-0.13,-0.07)and-0.49 mm^(2)(95%CI-0.66,-0.32)respectively.Circularity didn’t approach statistical significance.Central retinal thickness(CRT)was significantly decreased in individuals with PD(P<0.001)by-23.1μm(95%CI-30.2,-16)and temporal retinal thickness(TRT)was decreased(P=0.025)by-11μm(95%CI-22,-1.5)while nasal retinal thickness(NRT)only approached statistical significance(P=0.066).CONCLUSION:The mean pSCP-VD,pDCP-VD,CRT and TRT are significantly decreased and FAZ is altered in individuals with PD.These findings can be potentially used as biomarkers for the diagnosis and evaluation of early PD.

Influence of Waveguide Properties on Wave Prototypes Likely to Accompany the Dynamics of Four-Wave Mixing in Optical Fibers

In this article, we study the impacts of nonlinearity and dispersion on signals likely to propagate in the context of the dynamics of four-wave mixing. Thus, we use an indirect resolution technique based on the use of the iB-function to first decouple the nonlinear partial differential equations that govern the propagation dynamics in this case, and subsequently solve them to propose some prototype solutions. These analytical solutions have been obtained;we check the impact of nonlinearity and dispersion. The interest of this work lies not only in the resolution of the partial differential equations that govern the dynamics of wave propagation in this case since these equations not at all easy to integrate analytically and their analytical solutions are very rare, in other words, we propose analytically the solutions of the nonlinear coupled partial differential equations which govern the dynamics of four-wave mixing in optical fibers. Beyond the physical interest of this work, there is also an appreciable mathematical interest.

Optical soliton with group delay in microring coupled-resonator optical waveguides

This paper derives the dispersion relation of microring coupled-resonator optical waveguides （CROWs） without any approximation by using the transfer matrix method. Based on the established dispersion relation of CROWs it obtains the slow group velocity and dispersion coefficient. It finds that the effect Of dispersion on optical pulses can be adjusted to balance the effect of nonlinearity by changing coupling coefficient or loss, so optical soliton with group delay can be obtained in microring CROWs. The optical soliton with group delay is of great significance for applications of microring CROWs in delay lines and optical buffers of future all-optical communication systems.

A SIMPLE SOLUTION FOR MULTILAYER METALLIC OPTICAL WAVEGUIDES

A simple solution for a multilayer metallic optical waveguide by transforming it intoan equivalent three-layer slab waveguide is presented. The dispersion relation of the equivalentthree-layer slab waveguide is solved by using a simple iterative formula. This method itself isexact and can approach any accuracy desired. Moreover, the numerical results for four-layer andfive-layer structures show that the second-order solution is also accurate enough. It is simple andhas the same form of expressions for TE and TM modes and for different layer structures.

Mode-field half-widths of Gaussian approximation for the fundamental mode of two kinds of optical waveguides

This paper analyzes the characteristic of matching efficiency between the fundamental mode of two kinds of optical waveguides and its Gaussian approximate field.Then, it presents a new method where the mode-field half-width of Caussian approximation for the fundamental mode should be defined according to the maximal matching efficiency method. The relationship between the mode-field half-width of the Gaussian approximate field obtained from the maximal matching efficiency and normalized frequency is studied; furthermore, two formulas of mode-field half-widths as a function of normalized frequency are proposed.

FLUORINATED PHTHALAZINONE-CONTAINING COPOLYIMIDES FOR PASSIVE OPTICAL WAVEGUIDES

A series of fluorinated copolyimides containing phthalazinone moieties were prepared from 2,2-bis(3,4-dicarboxyphenyl)hexafluoropropane dianhydride(6FDA),3,3'4,4'-benzophenone-tetracarboxylic dianhydride(BPDA)and2-(4-aminophenyl)-4-[4-(4-aminophenoxyl)phenyl]-2,3-phthalazin-1-one(DHPZ-2NH_2)for making polymeric opticalwaveguides.The resulting copolymers containing 0-50 mo1% BPDA/DHPZ-2NH_2 show good solubility and are soluble insome organic polar aprotic solvents.The copolyimides also present excellent thermal stability.These polymers possess highglass transition temperature higher than 603 K and high decomposition temperature above 742 K determined by differentialscanning calorimetry and thennogravimetric analysis,respectively,under a nitrogen atmosphere.Their refractive indicescould be controlled by varying the ratio of 6FDA and BPDA in the copolymer from 0.5 to 1.0,and the in-plane refractiveindices(n_(TE))range from 1.6366 to 1.6668 and the out-of-plane refractive indices(n_(TM))from 1.6024 to 1.6280 at 632.8 nm.The polymers birefringence(0.0342-0.0388)is almost independent of the 6FDA content of copolymer,which indicated thatthe phthalazinone-containing copolyimides could be suitable to fabricate optical waveguides possessing a low polarizationdependent loss(PDL).

A MATRIX METHOD FOR SOLVING PLANAR DIELECTRIC OPTICAL WAVEGUIDES

A matrix method used in multilayer stack of dielectric films is applied-to planar dielectric optical waveguides. A simple and applicable method for obtaining characteristic equation is presented.

Full-vectorial analysis of optical waveguides by the finite difference method based on polynomial interpolation

Based on the polynomial interpolation, a new finite difference （FD） method in solving the full-vectorial guidedmodes for step-index optical waveguides is proposed. The discontinuities of the normal components of the electric field across abrupt dielectric interfaces are considered in the absence of the limitations of scalar and semivectorial approximation, and the present PD scheme can be applied to both uniform and non-uniform mesh grids. The modal propagation constants and field distributions for buried rectangular waveguides and optical rib waveguides are presented. The hybrid nature of the vectorial modes is demonstrated and the singular behaviours of the minor field components in the corners are observed. Moreover, solutions are in good agreement with those published early, which tests the validity of the present approach.

Modified Hybrid Plasmonic Waveguides as Tunable Optical Tweezers

We propose a series of modified hybrid plasmonic waveguide systems.It is found that their propagation distances and mode areas depend on their shapes notably.The optical trapping forces exerting on the dielectric nanoparticles are calculated,and the strength and range of the forces can be adjusted by altering the shapes of the waveguides.These features demonstrate the possibility of using the modified hybrid waveguide systems to design tunable nanoscale optical tweezers.

Optical properties of He^(+)-implanted and diamond blade-diced terbium gallium garnet crystal planar and ridge waveguides

Terbium gallium garnet(Tb_(3)Ga_(5)O_(12),TGG)crystal can be used to fabricate various magneto-optical devices due to its optimal Faraday effect.In this work,400-keV He^(+)ions with a fluence of 6.0×10^(16)ions/cm^(2)are irradiated into the TGG crystal for the planar waveguide formation.The precise diamond blade dicing with a rotation speed of 2×10^(4)rpm and a cutting velocity of 0.1 mm/s is performed on the He^(+)-implanted TGG planar waveguide for the ridge structure.The darkmode spectrum of the He^(+)-implanted TGG planar waveguide is measured by the prism-coupling method,thereby obtaining the relationship between the reflected light intensity and the effective refractive index.The refractive index profile of the planar waveguide is reconstructed by the reflectivity calculation method.The near-field light intensity distribution of the planar waveguide and the ridge waveguide are recorded by the end-face coupling method.The He^(+)-implanted and diamond blade-diced TGG crystal planar and ridge waveguides are promising candidates for integrated magneto-optical devices.

Optical Properties of the Coupling Interface for Planar Optical Waveguides

Planar optical waveguides are the key elements in a modern, high-speed optical network. An important problem facing the optical fiber communication system, specifically planar optical waveguides, is coupling. The current study presents a coupling model for planar optical waveguides and optical fibers. The various effects of the optical properties of the coupling interface were analyzed by the scalar finite difference beam propagation method, including the thickness, with or without the matching refractive index of the interface adhesive. The findings can serve as a guide for planar optical waveguide packaging.

Loss Measurements on Polymer Thin Film Optical Waveguides

A simple setup for the measurement of transmission loss in polymer thin film optical waveguides is described. A new electro-optic polymer film has been prepared. The transmission loss of the film is measured before and after corona poling. And the loss is determined to be 1.84 dB/cm and 2.14 dB/cm, respectively.

A 1×4 Polymeric Digital Optical Switch Based on the Thermo-Optic Effect

We present a 1 × 4 Y-branch digital optical switch in which S-bend variable optical attenuators are integrated. The S-bend waveguides, which are always introduced to connect the switch and the standard fiber array, are made use of and designed as variable optical attenuators. A compact device with low crosstalk and larger branching-angle is obtained. The device is fabricated on the thermo-optic polymer materials,and the performance of the device is measured. With an applied driving power of less than 200mW, the device has a low crosstalk of less than - 35dB at a wavelength of 1.55 μm.

A Single Mode980 nm In Ga As/Ga As/Al Ga As Large Optical Cavity Quantum Well Laser with Low Vertical Divergence Angle

To achieve high optical power as well as low vertical divergence angle,a new kind of optim ized large opti- cal cavity (L OC) structure is applied to a ridge waveguide 980 nm In Ga As/ Ga As/ Al Ga As m ulti- quantum well laser.The optical power density in the waveguide is successfully reduced.The maxim um output power is more than 40 0 m W with a slope efficiency of 0 .89W/ A and the far- field vertical divergence angle is lowered to 2 3°.

Fabrication and Evaluation of Bragg Gratings on Optimally Designed Silicon-on-Insulator Rib Waveguides Using Electron-Beam Lithography

The fabrication of Bragg gratings on silicon-on-insulator （SOI） rib waveguides using electron-beam lithography is presented. The grating waveguide is optimally designed for actual photonic integration. Experimental and theoretical evaluations of the Bragg grating are demonstrated. By thinning the SOl device layer and deeply etching the Bragg grating, a large grating coupling coefficient of 30cm^-1 is obtained.

Temperature sensor based on polymer thin film optical waveguide

Based on attenuated total reflection （ATR） and thermo-optic effect, the polymeric thin film planar optical waveguide is used as the temperature sensor, and the factors influencing the sensitivity of the temperature sensor are comprehensively analyzed. Combined with theoretical analysis and experimental investigation, the sensitivity of the temperature sensor is related to the thicknesses of the upper cladding layer, the waveguide layer, the optical loss of the polymer material and the guided wave modes. The results show that the slope value about reflectivity and temperature, which stands for the sensitivity of the polymer thin film temperature sensor, is associated with the waveguide film thickness and the guided wave modes, and the slope value is the highest in the zero reflectance of a certain transverse electric （TE） mode. To improve the sensitivity of the temperature sensor, the sensor＇s working incident light exterior angle α should be chosen under a certain TE mode with the reflectivity to be zero. This temperature sensor is characterized by high sensitivity and simple structure and it is easily fabricated.

AN OPTICAL FIBER SENSOR TECHNIQUE BASED ON SLIGHT DISTURBANCE RADIATION LOSS OF STOCHASTIC WALL

This paper presents an optical sensor technique used in the damage evaluation which is formed by structurally integrated fiber optic reticulate sensors embedded in the composite materials. The fibers are processed by chemical method and their outsides are peeled to form particles of irregular distribution and they differ in size, so the slight disturbance range of stochastic wall are formed in fibers. According to the characteristics of power loss of waveguide mode caused by slight disturbance of stochastic wall and radiative mode transmission, the range of slight disturbance of stochastic wall may be served as the sensitive range of the sensor. On the basis of theory of slight disturbance of stochastic wall of planar optical waveguide, the relation between the corrosion time and the opposite power loss by experiments is investigated. In this paper, the measurement results of object of SIFORS are also presented. The results show that the optical sensor technique may be used in the damage evaluation of an aircraft.