Overview of the South African mine health and safety standardization and regulation systems

Outlined the South African mine health and safety regulatory framework,in- cluding the roles of government,tripartite council,service agencies,mine enterprises, rescue stations and workers unions,analyzed the institutional structures of South African mine health and safety standardization,including the South African standard and specifi- cation systems and standard development processes,and characterized the South African mine health and safety standardization and regulation systems.Intended to provide some suggestions for the transformation and improvement of mine health and safety standardi- zation and regulation systems in China or in similar situations.

Performance and Safety Improvement of Induction Motors based on Testing and Evaluation Standards

The induction motor,which converts electrical energy into mechanical energy,has been recognized as the cornerstone of industrialization.The rotor of an induction motor can be either a squirrel cage rotor or a wound-type rotor,both existing as magnetless topologies.Three-phase squirrel cage induction motors are frequently utilized in industrial drives because they are dependable,have high starting torque,are selfstarting and affordable.Single-phase induction motors,on the other hand,are commonly used for small loads such as domestic appliances in form of modest fans,pumps and electric power tools.In South Africa,there have been reports of fires and explosions resulting in live and property loss because of induction motors that have not been thoroughly tested or are incorrectly labelled in terms of ratings,electrical safety and performance.The goal of this study is targeted at preventing end-user injuries and failures caused by non-compliant induction motors,by evaluating locally manufactured/imported induction motors based on tests and evaluation from standards(IEC and SANS).The study is conducted using experimental procedures at the Explosion Prevention Technology and Rotating Machines(EPT and RM)laboratory,South African Bureau of Standards(SABS),South Africa.The main finding from the study shows differences in the nameplate characteristics of various induction motors which could have detrimental effects such as production and operational downtime in their end-use industries,at later stages.

College students compete in the National Standardization Olympiad

The finals of the “Mo Gan Shan” National Standardization Olympiad of College Students were held on October 12-13 in Huzhou city, Southeast China's Zhejiang province.The competition was guided by SAMR, and hosted by the China Association for Standardization(CAS), China Jiliang University, and the National Standardization League of Universities. Themed “Standards lead the future, innovation fulfills dreams”, the competition aims to stimulate college students' interest and enthusiasm for standardization knowledge, and cultivate standardization talents with international vision and innovation capability.

Analysis of standardization development of TCM in Sichuan

Sichuan province is home to rich traditional Chinese medicine(TCM)resources.Recent years have seen unremitting efforts of TCM standardization in the province.By analyzing the measures and existing problems,this paper provides recommendations to boost TCM development through standardization.

Standardization of meibomian gland dysfunction in an Egyptian population sample using a non-contact meibography technique

AIM:To develop normative data for meibomian gland dysfunction(MGD)parameters,using non-contact meibography technique of Sirius Costruzione Strumenti Oftalmici(CSO)machine,in an Egyptian population sample.METHODS:Observational,cross-sectional,analytic study,in which 104 Egyptian volunteers were included.Both upper lids were examined,using“Sirius CSO”machine.Each eyelid was given a degree of meibomian gland loss(MGL),which was calculated by the software of the machine.RESULTS:Mean percentage MGL in right upper lid was of 30.9%±12.6%,and that of left upper lid was 32.6%±11.8%.Thirty-four volunteers(32.7%)had first-degree MGL in their right upper lid,and 67.3%had second-degree loss.One volunteer(1%)had zero-degree MGL in left upper lid,28(26.9%)had first-degree loss,and 75(72.1%)had second-degree loss.Degree of MGL in right upper eyelid was not related to age,but degree of MGL in left upper eyelid increased with age.There was statistically significant difference between both genders for degree of MGL in right eye(P=0.036)and in left eye(P=0.027).CONCLUSION:Noncontact meibography is a useful non-invasive tool for diagnosing MGL.MGL is diagnosed in 100%of apparently normal individuals;26.9%-32.7%of which have first-degree MGL,and 67.3%-72.1%have second-degree MGL.

Pudong’s experience of standardization mechanism innovation

The Pudong New Area has followed the standardization polices of the country,vigorously implemented the standardization strategies,and fulfilled the historical mission of“serving as a pioneer of reform&opening-up and innovative development”.

PDE Standardization Analysis and Solution of TypicalMechanics Problems

A numerical approach is an effective means of solving boundary value problems(BVPs).This study focuses on physical problems with general partial differential equations(PDEs).It investigates the solution approach through the standard forms of the PDE module in COMSOL.Two typical mechanics problems are exemplified:The deflection of a thin plate,which can be addressed with the dedicated finite element module,and the stress of a pure bending beamthat cannot be tackled.The procedure for the two problems regarding the three standard forms required by the PDE module is detailed.The results were in good agreement with the literature,indicating that the PDE module provides a promising means to solve complex PDEs,especially for those a dedicated finite element module has yet to be developed.

Dialogue on standards:directions and difficulties of standardization discipline construction

To probe into the directions and difficulties of standardization discipline construction in China,China Standardization Press organized a pertinent dialogue on July 10.During the event,Yu Xinli,President of China Association for Standardization,was invited as the moderator.Several standardization experts including Song Mingshun,Mai Lyubo,Qiang Yi,Cao Lili,and Huang Manxue from the China Standardization Expert Committee and renowned universities and research institutes in the country were invited as guests to give their insightful views.

Analysis of standardization of community security fund management-Taking practice of community security fund management in Wuhou district of Chengdu as an example

The Chengdu community security funds refer to the special security funds for urban and rural community development and governance in Chengdu.At present,there are some problems in the use of community security funds,such as low participation of residents,and low efficiency of fund use.Taking the exploration of standardization of community security fund management in Wuhou district,Chengdu city,as an example,this paper suggests further strengthening the use and management of community security funds by means of standardization,ensuring the democratic,open,and transparent use of funds,and effectively enhancing the supporting role of community security funds in community governance.

Workshop on driving inclusiveness in standardization

With the support of the Belgian FPS Economy,SBS and CEN-CENELEC are co-organizing the workshop,under the High-Level Forum on European standardization(HLF)and its workstream on inclusiveness in national standardization,to tackle issues of access and participation in standardization at the national level and discuss and promote best practices.

Parallel session on marine standardization

The session on marine standardization was successfully held on May 22.Yu Xinli,President of China Association for Standardization(CAS),was invited to deliver a keynote speech.The highlight of her speech is presented as follows。

China and Sri Lanka sign a MoU on standardization

Witnessed by Chinese Premier Li Qiang and Sri Lanka Prime Minister Dinesh Gunawardena,Luo Wen,Minister of SAMR,and Anura Dissanayake,Secretary to the Prime Minster of Sri Lanka,signed a MoU on the standardization area on March 26.

Field Load Test Based SHM System Safety Standard Determination for Rigid Frame Bridge

The deteriorated continuous rigid frame bridge is strengthened by external prestressing. Static loading tests wereconducted before and after the bridge rehabilitation to verify the effectiveness of the rehabilitation process. Thestiffness of the repaired bridge is improved, and the maximum deflection of the load test is reduced from 37.9 to27.6 mm. A bridge health monitoring system is installed after the bridge is reinforced. To achieve an easy assessmentof the bridge’s safety status by directly using transferred data, a real-time safety warning system is createdbased on a five-level safety standard. The threshold for each safety level will be determined by theoretical calculationsand the outcomes of static loading tests. The highest risk threshold will be set at the ultimate limit statevalue. The remaining levels, namely middle risk, low risk, and very low risk, will be determined usingreduction coefficients of 0.95, 0.9, and 0.8, respectively.

Exploration of the Review Standards of Safety Assessment Reports for Ordinary Cosmetics

Cosmetic safety assessment has distinct characteristics of interdisciplinary and extensive intersection,intensive technical knowledge,and high professional requirements.China is confronted with problems such as a lack of professional safety assessment personnel and review personnel for cosmetic safety assessment.The compliance of safety assessment reports has become one of the important factors affecting the process of cosmetic filing and listing.This article contains the comprehensive analysis on the requirements of relevant regulations and technical documents for cosmetic safety assessment,as well as the judgment principles,and specific requirements of safety assessment reports.The key issues in current cosmetic safety assessment and the safety assessment requirements for typical products also are being focused on,so as to help standardize and unify the review standards of cosmetic safety assessment report,and provide reference for cosmetic filers.

Decoding RoPax Ship Capsizes and Development of an ISO Ship Safety Standard

Marine accidents often result in significant losses of human life, environmental damage, and property destruction. Additionally, ships and offshore plants are large-scale and complex systems, making safety assessments challenging. However, the advent of onboard electronic systems has made it possible to monitor and respond more effectively. These new technologies can enhance safety levels while reducing the workload on crews. In this paper, authors analyze recent accidents involving ships with high structures above the water, such as car carriers or RoPax vessels, and propose preventive safety indicators to help prevent similar accidents from recurring.

面向抗震韧性评价的型钢混凝土柱易损性函数

为满足型钢混凝土(steel reinforced concrete,SRC)结构地震损失评估及抗震韧性评价的需求,建立SRC柱构件的地震易损性函数十分关键。本文首先基于文献调研,结合JGJ 138—2016《组合结构设计规范》,从国内外文献中筛选了227榀拟静力循环加载的SRC柱,建立标准化的SRC柱试验数据库。其次,考虑失效模式的差异性,将构件分为延性SRC柱和偏脆性SRC柱,并给出了不同类别的构件损伤等级划分标准及对应的修复方法。然后,以位移角为工程需求参数,分别提取了各构件对应不同损伤等级的位移角限值,采用FEMA P-58方法,建立了不同类别的SRC柱在各损伤等级下的易损性函数。最后,给出了与GB/T 38591—2020《建筑抗震韧性评价标准》相容的易损性函数参数表,并分析了抗震等级和轴压比对SRC柱易损性函数参数及易损性曲线的影响。最终,通过分析一幢型钢混凝土框架结构办公楼的抗震韧性,说明了所提出的易损性函数在抗震韧性评价中的作用。

中医住培过程考核体系构建

我国已全面启动新的住院医师规范化培训制度,并取得了一定成效,然而目前还存在培训模式偏西化、理论学习轻基础、考核模式轻过程和管理模式未分层等不足。考核是住院医师规范化培训管理的重要组成部分,其结果是衡量基地与住院医师规范化培训学员培养质量的客观指标,其中的过程考核是重中之重。浙江中医药大学附属第三医院作为首批国家中医住院医师规范化培训基地,按照上级主管部门相关文件要求建立了过程考核体系,制定了规范的考核管理制度,采取规范日常考核、严肃出科考核、增设季度考核、设置专项考核、组织年度考核、落实绩效考核等相关举措,多管齐下,保证培训质量。

大尺寸非标碟簧承载性能仿真分析

以某锤击式振打系统中的大尺寸非标碟簧为研究对象,对其在不同载荷作用下的响应特性进行了研究。分别采用理论及仿真模拟方法,对标准碟簧及大尺寸非标碟簧的载荷-变形及载荷-应力状态进行了分析;并采用仿真分析方法,研究了对合状态下重载非标碟簧的响应特征。研究结果表明,对于大变形工况,有限元法能更准确地描述大尺寸非标碟簧的承载性能;大尺寸非标碟簧承受载荷小于额定载荷时,其载荷-变形量呈现线性特征;承受载荷超过额定载荷后,载荷-变形量呈现非线性特征。分析认为,碟簧载荷与变形量的理论计算方法适用于结构的小变形状态,当载荷超过额定载荷时,碟簧的变形较大,小变形的线弹性理论已经不适用于大载荷工况。随着载荷变大,对合状态碟簧接触面的接触状态会发生突变,从面-面接触变成线-面接触,接触状态的改变会造成碟簧局部应力产生变化,影响碟簧的安全使用。

住院医师规范化培训急诊专业技能培训中教师和学员的认知差异

背景住院医师规范化培训是培养高素质临床医师队伍的关键,急诊医学科是救治急危重症患者的前沿阵地,更是培养优秀临床住院医师的重要训练营。医学技能培训是住院医师规范化培训的重要内容,急诊核心技能培训涵盖的项目较多,教师和学员对具体培训项目的认知存在差异,会影响技能培训的效率和质量。目的调查分析河北省住院医师规范化培训急诊专业技能培训中教师和学员对培训项目的认知差异。方法2021年10月,选取来自河北省15家急诊住院医师规范化培训基地,准备参加河北省住院医师规范化培训技能大赛的教师和学员共103名作为调查对象,其中教师37名、学员66名。依据《临床技能操作细化流程及评分标准》,对13个急诊核心技能培训项目,按细化流程操作步骤制定电子调查问卷,进行“难易度”和“操作时遗漏情况”评分调查。结果教师和学员在“难易度”方面,对7个项目(53.85%):心电图采集术、动脉穿刺术、腹腔穿刺术、单人心肺复苏术、中心静脉穿刺术、气管插管术、三腔两囊管置入术,25个步骤(16.45%)的认知存在差异,教师的“难易度”认知评分低于学员(P<0.05)。教师和学员在“操作时遗漏情况”方面,对9个项目(69.23%):心电图采集术、腹腔穿刺术、单人心肺复苏术、中心静脉穿刺术、气管插管术、三腔两囊管置入术、腰椎穿刺术、无创通气术、胸腔穿刺术,和24个步骤(15.79%)认知存在差异,教师的“操作时遗漏情况”认知评分低于学员(P<0.05);其余3个培训项目(环甲膜穿刺术、同步电复律术、骨髓穿刺术)教师和学员在操作各步骤“难易度”“操作时遗漏情况”方面的认知比较,差异均无统计学意义(P>0.05)。结论教师和学员对急诊核心技能培训“难易度”和“操作时遗漏情况”方面确实存在差异,一方面可促进临床技能培训课程设置的改进,提高培训效率,为培养高层次、高水平、应用型的医学人才提供方法学基础;另一方面,提示在今后住院医师规范化培训的类似相关研究中,在涉及教师和学员两个群体时,要考虑到二者之间可能存在差异,以期更客观地反映和探究住院医师规范化培训相关问题。

Thoughts on Establishment of the Agricultural Products Quality and Safety(Standards) Cooperation Center in Asia-Pacific Region

The establishment of agricultural products quality and safety cooperation mechanism and the research demonstration center in the Asia-Pacific reg coordinating each other, is not only of great ening cooperation with countries in Asia-Pacific region and for agricultural production safety of those countries in Asia- Pacific region, but also very necessary for our country to build a responsible image in the quality and safety of agricultural products, protection of the benefit of agriculture-related enterprises, increasing exports, ensuring imported food safety and China＇s national food security, as Well as nice exploration of establishing the global agricultural＇ products quality and safety cooperation center.