Development of SA-533 Type B CL. 1+SA-240 Type 304L roll-bonded clad steel plate for safety injection tank of CAP1400 nuclear power plant

Aiming to meet the demand of the country＇ s nuclear demonstration project on the CAP1400 nuclear power plant, Baosteel uses the roll-bonding technology and develops the SA-533 Type B CL. 1 ＋ SA-240 Type 304L high-strength and high-toughness clad steel plate with a shear strength of over 310 MPa for the nuclear power plant＇ s safety injection tank. The properties of the quenched and tempered and the simulated post-weld heat treatment states are systematically studied herein through a comprehensive inspection and evaluation of the composition,microstructure,and properties of the clad steel plate. The results show that the bonding interface has high shear strength and that the base metal has high strength and good toughness at low temperatures. Hence, the performance fully meets the technical requirements of the CAP1400 nuclear power plant＇ s safety injection tank in the country＇ s nuclear demonstration project. The roll-bonded clad steel plate can be used to manufacture the safety injection tank of the CAP1400 nuclear power plant.

Aseismic safety analysis of a prestressed concrete containment vessel for CPR1000 nuclear power plant

Abstract： The containment vessel of a nuclear power plant is the last barrier to prevent nuclear reactor radiation. Aseismic safety analysis is the key to appropriate containment vessel design. A prestressed concrete containment vessel （PCCV） model with a semi-infinite elastic foundation and practical arrangement of tendons has been established to analyze the aseismic ability of the CPR1000 PCCV structure under seismic loads and internal pressure. A method to model the prestressing tendon and its interaction with concrete was proposed and the axial force of the prestressing tendons showed that the simulation was reasonable and accurate. The numerical results show that for the concrete structure, the location of the cylinder wall bottom around the equipment hatch and near the ring beam are critical locations with large principal stress. The concrete cracks occurred at the bottom of the PCCV cylinder wall under the peak earthquake motion of 0.50 g, however the PCCV was still basically in an elastic state. Furthermore, the concrete cracks occurred around the equipment hatch under the design internal pressure of 0.4MPa, but the steel liner was still in the elastic stage and its leak-proof function soundness was verified. The results provide the basis for analysis and design of containment vessels.

Upgrade to Nuclear Power Plant Krsko Internal Flooding Probabilistic Safety Analysis

The original internal flooding probabilistic safety analysis （PSA） study of Krsko Nuclear Power Plant （two-loop Pressurized Water Reactor （PWR） plant of Westinghouse design） was performed in mid nineties and limited to reactor core damage risk （Level 1 PSA）. In 2003, it was, together with other safety and hazard analyses, subject to the Periodic Safety Review （PSR）. In the PSR, it was stated that methodological PSA approaches and guidelines have evoluted during the past decade and several observations were provided, concerning the area screening process, residual risk and treatment of plant damage states and risk from radioactivity releases （i.e., Level 2 PSA）. In order to address the PSR observations, upgrade ofKrsko NPP internal flooding PSA was undertaken. The area screening process was revisited in order to cover the areas without automatic reactor trip equipment. The model was extended to Level 2. Residual risk was estimated at both Level 1 and Level 2, in terms of core damage frequency （CDF） and large early release frequency （LERF）, respectively.

Development of nuclear power plant real-time engineering simulator

A nuclear power plant real-time engineering simulator was developed based on general-purpose ther- mal-hydraulic system simulation code RELAP5. It mainly consists of three parts:improved thermal-hydraulic system simulation code RELAP5,control and protection system and human-machine interface. A normal transient of CHASHMA nuclear power plant turbine step load change from 100% to 90% of full power,was simulated by the en- gineering simulator as an application example. This paper presents structure and main features of the engineering simulator,and application results are shown and discussed.

Structural Characteristics and Mechanical Properties of Rock Mass in the Field of Tianwan Nuclear Power Plant, China

The structural characteristics and mechanical properties of the rock mass are important parts of the feasibility study on the nuclear power engineering field. In this study, by means of in situ investigation and statistics, the structural plane and joint fissure features of the rock mass were analyzed and discussed at different plots and different depth scopes in the Tianwan Nuclear Power engineering field, the rock mass integrality and its weathered degree were evaluated respectively, and especially, the unfavorable geological phenomena of strongly-weathered cystid existing in the field were studied. According to the results of indoor rock mechanical tests, in combination with drilling, the shallow seismic prospecting, sonic logging and point load tests, the statistical results of physical and mechanical indices of rocks at key plots of the field were analyzed, and the design parameters of the field were calculated. It provided scientific basis for the foundation design of the nuclear power plant.

Effects of Liaoning Hongyanhe Nuclear Power Plant on the Zooplankton Community in Summer of 2017

To evaluate the effects of the Hongyanhe Nuclear Power Plant on the zooplankton community in the surrounding seawater during summer, multiple environmental factors and zooplankton distribution along the east coast of Liaodong Bay were investigated in the summer of 2017. In particular, the influences of seawater temperature, salinity, and chlorophyll a(Chl a) on the zooplankton community were analyzed. Zooplankton abundances and Chl a concentrations along the east coast of Liaodong Bay showed an initial increase followed by a decrease from July to September. During the three months, the zooplankton abundance was the highest(8116.70 ind m^(-3)) in August. The Shannon-Wiener index showed a downtrend from July to September, with the average value falling from 1.65 in July to 1.50 in September. Calanus sinicus, Paracalanus parvus, copepodid, and bivalve larvae were the dominant species/groups in the three months. The effects of the nuclear power plant's outlet on the environment factors were mainly reflected in the increased seawater temperature. Redundancy analysis showed that the zooplankton community was jointly affected by seawater temperature, salinity and Chl a concentration, and the degree of this impact varied monthly. The impact of seawater temperature on the zooplankton community was stronger than that of salinity. The primary impact of the Hongyanhe Nuclear Power Plant on the structure and distribution of the zooplankton community in the surrounding seawater during the summer was increased seawater temperature, which caused a reduction in the abundance of dominant species/groups.

Ageing related events at nuclear power plants

This paper presents main results of a comprehensive study performed by the European Clearinghouse on Operating Experience Feedback of NPP with the support of IRSN (Institut de S?reté Nucléaire et de Radioprotection) and GRS (Gesellschaft für Anlagen und Reaktorsi-cherheit mbH). Physical ageing mechanisms of structure, systems and components that eventually lead to ageing related systems and components failures at nuclear power plants were the main focus of this study. The analysis of ageing related events involved operating experience reported by NPP operators in France, Germany, USA and to the IAEA/NEA International Reporting system, on operating experience for the past 20 years (i.e. 1990-2009). A list of ageing related events was populated. Each ageing related event contained in the list was analyzed and results of analysis were summarized for each commodity group for which the ageing degradation appeared to be a dominant contributor or direct cause. The most common degradation mechanisms/ageing effects for each specific component/commodity group, their risk significance and consequences to the plant performance are described. This paper provides insights into ageing related operating experience as well as recommendations to deal with the physical ageing of nuclear power plant SSC important to safety.

Research on the attribution evaluating methods of dynamic effects of various parameter uncertainties on the in-structure floor response spectra of nuclear power plant

： Consideration of the dynamic effects of the site and structural parameter uncertainty is required by the standards for nuclear power plants （NPPs） in most countries. The anti-seismic standards provide two basic methods to analyze parameter uncertainty. Directly manually dealing with the calculated floor response spectra （FRS） values of deterministic approaches is the first method. The second method is to perform probability statistical analysis of the FRS results on the basis of the Monte Carlo method. The two methods can only reflect the overall effects of the uncertain parameters, and the results cannot be screened for a certain parameter＇s influence and contribution. In this study, based on the dynamic analyses of the floor response spectra of NPPs, a comprehensive index of the assessed impact for various uncertain parameters is presented and recommended, including the correlation coefficient, the regression slope coefficient and Tornado swing. To compensate for the lack of guidance in the NPP seismic standards, the proposed method can effectively be used to evaluate the contributions of various parameters from the aspects ＆sensitivity, acuity and statistical swing correlations. Finally, examples are provided to verify the set of indicators from systematic and intuitive perspectives, such as the uncertainty of the impact of the structure parameters and the contribution to the FRS of NPPs. The index is sensitive to different types of parameters, which provides a new technique for evaluating the anti-seismic parameters required for NPPs.

SVBR-100 Nuclear Technology as a Possible Option for Developing Countries

Many developing countries need ecologically clean power sources (PS). The nuclear power plants are such sources. However, a great number of the developing countries do not possess developed large capacity power systems. Moreover, currently in the developing countries, there are no highly skilled personnel to provide construction and reliable and safe operation of the nuclear plants, which are complex and potentially hazardous systems. In some countries, the level of terroristic threat is extremely high. For that reason, there are specific requirements to the nuclear PSs intended for use in the developing countries. In the presented report, the specific requirements which must be met by the NPT proposed for use in developing countries are formulated, basic statements of the SVBR-100 concept are presented, design and principal scheme of the reactor fa-ility are described, major characteristics of SVBR-100 are summarized.

Assessment of Containment Structures Against Missile Impact Threats

In order to ensure the highest safety requirements, nuclear power plant structures (the containment structures, the fuel storages and transportation systems) should be assessed against all possible internal and external impact threats. The internal impact threats include kinetic missiles generated by the failure of high pressure vessels and pipes, the failure of high speed rotating machineries and accidental drops. The external impact threats may come from airborne missiles, aircraft impact, explosion blast and fragments. The impact effects of these threats on concrete and steel structures in a nuclear power plant are discussed. Methods and procedures for the impact assessment of nuclear power plants are introduced. Recent studies on penetration and perforation mechanics as well as progresses on dynamic properties of concrete-like materials are presented to increase the understanding of the impact effects on concrete containment structures.

Safety of Future NPPs Must Not Be in Conflict with Economics

The conflict between safety and economics requirements is peculiar to the present nuclear power (NP). The main point of the conflict is that for traditional type reactors the increase of requirements to safety of nuclear power plants (NPP) worsens their economical characteristics. This is caused by large potential energy accumulated in reactor coolant. In the presented paper the opportunity and expediency of changeover to reactors with heavy liquid-metal coolants (HLMC) in future NP is grounded. First of all, this refers to lead-bismuth coolant (LBC) mastered in the process of operating nuclear submarines (NS) reactors. The reactor facilities (RFs) of that type cannot cause destruction of defense barriers and make possible deterministic elimination of severe accidents with catastrophic radioactivity release. So it will make possible to eliminate the highlighted conflict and reasons for existence of population’s radiophobia. Lead-bismuth fast reactor SVBR-100 with electric power of 100 MWe is the reactor facility of that type. The effect of accumulated in coolant potential energy on safety and economics is considered. Main specific features of SVBR-100 technology providing a high level of inherent self-protection and passive safety are presented.

Employing adaptive fuzzy computing for RCP intelligent control and fault diagnosis

Loss of coolant accident(LOCA),loss of fluid accident(LOFA),and loss of vacuum accident(LOVA)are the most severe accidents that can occur in nuclear power reactors(NPRs).These accidents occur when the reactor loses its cooling media,leading to uncontrolled chain reactions akin to a nuclear bomb.This article is focused on exploring methods to prevent such accidents and ensure that the reactor cooling system remains fully controlled.The reactor coolant pump(RCP)has a pivotal role in facilitating heat exchange between the primary cycle,which is connected to the reactor core,and the secondary cycle associated with the steam generator.Furthermore,the RCP is integral to preventing catastrophic events such as LOCA,LOFA,and LOVA accidents.In this study,we discuss the most critical aspects related to the RCP,specifically focusing on RCP control and RCP fault diagnosis.The AI-based adaptive fuzzy method is used to regulate the RCP’s speed and torque,whereas the neural fault diagnosis system(NFDS)is implemented for alarm signaling and fault diagnosis in nuclear reactors.To address the limitations of linguistic and statistical intelligence approaches,an integration of the statistical approach with fuzzy logic has been proposed.This integrated system leverages the strengths of both methods.Adaptive fuzzy control was applied to the VVER 1200 NPR-RCP induction motor,and the NFDS was implemented on the Kori-2 NPR-RCP.

基于SEM-AHP方法的核电厂定量人为因素评价研究

文章基于人为因素分析与分类系统,分析了115起核电厂执照运行事件报告(Licensed Operation Event Report,LOER),并对影响核电厂事件发生的人为因素进行分类,采用结构方程模型方法得出各影响因素的路径系数,两两比较得到层次分析模型的判断矩阵,进而确定各因素的权重。同时对核电厂人为因素的重要性做排序分析,找到核电厂运行过程中的安全管理薄弱环节,从而促进核电厂系统平稳运行。

基于中国场地相关谱的核电厂结构地震易损性与风险研究

随着概率地震危险性分析与分解理论与应用的发展,场地相关谱生成理论也得到了不断发展,基于中国场地相关谱的核工程等重要基础设施地震易损性与风险分析研究还较为匮乏。该文总结了标量型中国概率地震危险性分析与分解理论方法,提出了向量型中国概率地震危险性分析与分解、条件型中国概率地震危险性分析基本原理,给出了基于中国概率地震危险性分析与分解的我国场地一致危险谱、条件均值谱、广义条件均值谱和条件一致危险谱生成理论和方法,总结了基于中国场地相关谱的核电厂结构地震易损性与风险分析理论基础,以我国某核电厂厂址及核电厂安全壳结构为算例,生成算例厂址场地相关谱,计算不同场地相关谱条件下核电厂安全壳结构地震易损性与风险。分析结果表明:不同场地相关谱条件下,我国核电厂安全壳结构安全裕量都较大;基于条件均值谱计算得到的风险结果偏于不保守。

基于RISMC方法的非能动核电厂小破口事故风险重要序列分析

文章以典型非能动核电厂小破口失水事故为研究对象,基于风险指引的安全裕度特性分析方法(Risk-Informed Safety Margin Characterization,RISMC),耦合确定论和概率论方法对事故发展进程进行研究,选取特定风险重要序列进行精细化建模分析,对重要系统进行离散分支(如自动卸压系统),对重要不确定性参数进行抽样处理(如自动卸压系统阀门阻力、内置换料水箱阀门阻力)。修改原概率安全分析模型中较为保守的成功准则概念,建立改进的离散事件树,以系统成功列数为依据建立故障树。针对特定序列进行不确定性参数的抽样并且对每一组工况进行全厂事故仿真模拟。从而,得到每个序列发生的频率以及在该特定条件下的条件失效概率,最终得到基于RISMC方法的堆芯损伤频率值。分析主要针对自动卸压系统配置和敏感性进行,运用基于RISMC方法CARS软件的分析计算,发现各序列的CDF值均有一定程度的减小。文章基于RISMC的案例分析验证了该方法在非能动电厂安全分析中的可行性,也证明该方法能够去掉一些过保守性,更加现实地对事故风险进行评估,有利于更准确地认识核电厂的安全裕量。

模拟事故工况下非能动核电厂安全相关涂层的可靠性测试及评估方法研究

安全相关涂层在非能动核电厂中起着重要的作用,涂层的失效会影响核电厂安全系统的功能执行,影响核安全。国内外核监管机构对于在设计基准事故(DBA)工况下涂层系统的可靠性及评估方法非常重视。文章结合非能动核电厂涂层系统的工程应用,针对其在DBA下的可靠性及评估方法进行了研究。研究表明:在DBA下非能动核电厂安全相关涂层的可靠性要综合考虑涂层的模拟DBA性能、干膜密度、导热性能等。而非能动核电厂安全相关涂层工程应用,则需从涂层的模拟DBA性能、干膜密度、导热性能、涂层碎片(数量、大小、位置和性能等)以及包络涂层碎片后的碎片裕量等角度进行综合评估,以确定在事故工况下涂层的可靠性,不对系统安全产生影响,保证核电厂更安全、高效和经济性运行。

基于差分电感的分体式压力/差压测量系统研究

随着安全级压力/差压变送器在核工业领域的广泛应用,提高其中传感器的可靠性已成为发展重点。对国内外核安全级压力/差压测量技术进行了深入研究。采用易远传的电感式传感器结构,设计了一种基于差分电感原理的安全级分体式压力/差压测量系统。阐述了测量系统中传感器和信号处理装置的详细设计方案,并对测量电路的设计进行了分析。通过分体式的设计方案,可有效提高测量设备的耐事故性能。该方案可为国内高可靠核级压力变送器产品的研发奠定基础,适用于核级压力、液位和流量信号的测量。该方案也适用于其他恶劣环境条件下非核测量领域的变送器产品研发。

核电厂安全级DCS缺省值设置策略研究

针对数字化仪控系统中无效信号的质量位随意蔓延使系统处于一种不确定状态的问题,结合核电厂运行工况和信号特性,对龙鳞平台故障诊断机制和信号质量位标识进行研究。考虑故障安全准则,系统性地提出缺省值设置原则。从信号执行功能和信号边界两个维度进行分析,确认缺省值的设置范围,并详细给出执行保护功能、报警功能、维护和试验功能信号的缺省值设置策略。同时,针对传统的缺省值验证方式无法全面、有效地进行缺省值验证的问题,提出一种利用全范围模拟机和虚拟数字化控制系统(DCS)进行缺省值验证的新方法。利用该方法可有效地对DCS内设置的缺省值进行系统性的验证。所提出的缺省值设置策略和验证方法可为后续核电厂安全级DCS的缺省值分析和设置提供全面的指导。

核电工程防造假管理体系建立与优化

近年来,在国内外核电建设过程中发现了个别造假现象,这些造假现象造成了经济损失,带来了质量隐患,引起了舆情风险。本文阐述了核电工程防造假管理体系建立与优化的总体思路,辨识、分析和评估了核电行业的造假风险,针对造假风险制定了防控措施,并探讨了后续的防造假管理体系优化方向,对于提高核电厂工程项目防造假管理能力具有重要意义。

核电厂安全级电气连接器的设计与试验

为实现安全级仪表信号的可靠传输,核电厂通常采用可拆卸的电气连接器连接仪表与电缆以及电缆与电缆。对电气连接器技术进行调研,设计了一种结构简单、性能可靠、操作安装方便、在地震以及严重事故下能有效吸收振动载荷、能够承受更长时间的辐照老化和热老化的安全级电气连接器。依托研制样机开展了功能性能试验和鉴定试验,试验结果表明:安全级电气连接器具有极高的可靠性,能够满足核电厂事故环境下的需求。该连接器可推广于其他恶劣环境条件下的应用领域。