Ni-Y2O3 nanocomposite powder with uniform distribution of fine oxide particles in the metal matrix was successfully fabricated via solution combustion process followed by hydrogen reduction. The combustion behavior wa...Ni-Y2O3 nanocomposite powder with uniform distribution of fine oxide particles in the metal matrix was successfully fabricated via solution combustion process followed by hydrogen reduction. The combustion behavior was investigated by DTA-TG analysis. The influence of urea to nickel nitrate（U/Ni） ratio on the combustion behavior and morphology evolution of the combusted powder was investigated. The morphological characteristics and phase transformation of the combusted powder and the reduced powder were characterized by FESEM, TEM and XRD. The HRTEM image of Ni-Y2O3 nanocomposite powder indicated that Y2O3 particles with average particle size of about 10 nm dispersed uniformly in the nickel matrix.展开更多
Perovskite LaMnO3 powders with an average crystallite size of 12.5 nm were rapidly synthesized via a microwave-induced autocombustion reaction using glycine as a fuel and nitrate as an oxidant. After self-propagating ...Perovskite LaMnO3 powders with an average crystallite size of 12.5 nm were rapidly synthesized via a microwave-induced autocombustion reaction using glycine as a fuel and nitrate as an oxidant. After self-propagating combustion, the desired nanocrystalline perovskite LaMnO3 was obtained and no further calcination was carried out. The possible processes of combustion reaction were discussed according to the principle of propellant chemistry. The autocombustion and thermal decomposition of the precursor were investigated using the TG-DTA and FT-IR techniques. The influences of glycine-nitrate molar ratio and heat-treatment temperature on the perovskite phase formation and crystallite size of as-burnt powder were studied by XRD. The morphology and size of the as-burnt powder before and after milling were characterized and compared by TEM.展开更多
A novel salt-assisted combustion process with ethylene glycol as a fuel and nitrate as an oxidant to synthesize high surface area celia nanopowders was reported. The effects of various tunable conditions, such as fuel...A novel salt-assisted combustion process with ethylene glycol as a fuel and nitrate as an oxidant to synthesize high surface area celia nanopowders was reported. The effects of various tunable conditions, such as fuel-to-oxidant ratio, type of salts, and amount of added salts, on the characteristics of the as-prepared powders were investigated by X-ray diffraction, transmission electron microscopy and BET surface area measurement. A mechanism scheme was proposed to illustrate the possible formation processes of well-dispersed ceria nanoparticles in the salt-assisted combustion synthesis. It was verified that the simple introduction of leachable inert inorganic salts as an excellent agglomeration inhibitor into the redox mixture precursor leads to the formation of well-dispersed ceria particles with particle size in the range of 4 ～6 nm and a drastic increase in the surface area. The presence of KCl results in an over ten-fold increment in specific surface area from 14.10 m^2·g^-1 for the produced ceria powders via the conventional combustion synthesis process to 156.74 m^2·g^-1 for the product by the salt-assisted combustion synthesis process at the same molar ratio of ethylene glycol-nitrate.展开更多
Highly dispersed perovskite NdCoO3 nanoparticles were prepared by a novel salt-assisted combustion process. The effects of NaCl content and calcination temperature on the characteristics of the products were character...Highly dispersed perovskite NdCoO3 nanoparticles were prepared by a novel salt-assisted combustion process. The effects of NaCl content and calcination temperature on the characteristics of the products were characterized by X-Ray Diffraction (XRD), Transmission Electron Microscopy (TEM) and BET surface area measurement. The facile introduction of NaCl in the conventional combustion synthesis process was found to result in the formation of well-dispersed perovskite nanoparticles and increase specific surface areas of the resultants from 1.7 to 43.2 m2·g-1. The catalytic properties of the typical NdCoO3 samples for thermal decomposition of ammonia perchlorate (AP) and their correlation with the NdCoO3 microstructure were investigated by Differential Scanning Calorimetry (DSC). The DSC results indicate that the addition of the amorphous NdCoO3 nanoparticles to AP incorporates two small exothermic peaks of AP into a strong exothermic peak, decreases the temperature of the AP exothermic peak to 314.0 ℃ by reduction of 138.3 ℃ and increases the apparent decomposition heat from 515 J·g-1 to over 1441 J·g-1, showing the intense catalytic activity for thermal decomposition of AP. It is also clear that the catalytic activity of the resultant NdCoO3 is related to their microstructure. According to Kissinger′s method, the kinetics parameters of the thermal decomposition of AP catalyzed by the as-prepared NdCoO3 samples were calculated to account for the order of their catalytic activity.展开更多
Fe-Ni-Y2O3 nanocomposites with uniform distribution of fine oxide particles in the gamma Fe Ni matrix were successfully fabricated via solution combustion followed by hydrogen reduction. The morphological characterist...Fe-Ni-Y2O3 nanocomposites with uniform distribution of fine oxide particles in the gamma Fe Ni matrix were successfully fabricated via solution combustion followed by hydrogen reduction. The morphological characteristics and phase transformation of the combusted powder and the Fe-Ni-Y2O3 nanocomposites were characterized by XRD, FESEM and TEM.Porous Fe-Ni-Y2O3 nanocomposites with crystallite size below 100 nm were obtained after reduction. The morphology, phases and magnetic property of Fe-Ni-Y2O3 nanocomposites reduced at different temperatures were investigated. The Fe-Ni-Y2O3 nanocomposite reduced at 900 °C has the maximum saturation magnetization and the minimum coercivity values of 167.41 A/(m2·kg)and 3.11 k A/m, respectively.展开更多
Nano-pelletα-Al_(2)O_(3) was prepared using aluminum nitrate as precursor and urea as fuel by a fast method of solution combustion synthesis.The formation of the nano material was dependent on the molar ratio of fuel...Nano-pelletα-Al_(2)O_(3) was prepared using aluminum nitrate as precursor and urea as fuel by a fast method of solution combustion synthesis.The formation of the nano material was dependent on the molar ratio of fuel/oxidant,calcination temperature,and foreign metallic ions.The prerequisite conditions of the formation were a suitable fuel/oxidant molar ratio larger than two and calcination temperature higher than 673 K.Foreign ions,Ce^(4+) or Co^(2+),hindered this formation via promoting the generation of stable penta-coordinated Al^(3+) ions due to strong interaction with alumina,were revealed by ^(27)Al NMR spectra.Such Al^(3+) ions were recognized as a critical intermediate state for the phase transformation of alumina and their presence deterred the transformation.The nano-pellet morphology of the product demonstrated a specific surface area of 69 m^(2)/g,of which the external surface area occupied 59 m^(2)/g.It was found that the supported cobalt acetate on such nano-pellets existed as nanoparticles attached to the external surface,evidenced by the TEM characterization.The prepared catalyst could efficiently catalyze the selective oxidation of cyclohexane under the reaction condition of pressure under 0.8 MPa,temperature at 373 K,and time for 4 hours.The conversion of the reaction achieved up to 7.9%;while the cyclohexanone selectivity was 42.7%and the cyclohexanone and cyclohexanol selectivity was 91.6%.This catalytic performance recommends the supported cobalt acetate on the inert nano-pellet a-Al_(2)O_(3) as a promising catalyst for the selective oxidation of cyclohexane.展开更多
A 20 wt% Ni/bentonite catalyst was prepared by a solution combustion synthesis (SCS), which exhibited higher activity for the CO_2methanation than that of an impregnation method (IPM), and the catalyst prepared by SCS...A 20 wt% Ni/bentonite catalyst was prepared by a solution combustion synthesis (SCS), which exhibited higher activity for the CO_2methanation than that of an impregnation method (IPM), and the catalyst prepared by SCS showed a CO_2 conversion of 85% and a CH4selectivity of 100% at 300 °C, atmospheric pressure, and 3600 ml·(g cat)-1·h-1, and the catalyst exhibited stable within a 110-h reaction. The results showed higher me- tallic Ni dispersion, smaller Ni particle size, larger specific surface area and lower reduction temperature in the Ni/ bentonite prepared by SCS than that of IPM. And the Ni/bentonite prepared by the SCS moderated the interaction between NiO and bentonite.展开更多
The Cu/CeO_(2)nanoporous composite material was prepared via a one-step and energy-saving method of solution combustion synthesis(SCS).The phase composition,surface morphology and optical characteristics of Cu/CeO_(2)...The Cu/CeO_(2)nanoporous composite material was prepared via a one-step and energy-saving method of solution combustion synthesis(SCS).The phase composition,surface morphology and optical characteristics of Cu/CeO_(2)were studied.The results show that the SCS products are composed of cubic fluorite CeO_(2)and Cu.Due to the generation and escape of gas during the synthetic reaction,the SCS CeO_(2)shows porous structure,in which the mesopores(diameter 10-17 nm)nest in the wall of large pores(diameter80-300 nm).X-ray photoelectron spectroscopy(XPS)outcomes indicate that the oxygen vacancy concentration of CeO_(2)increases(18.97%-30.93%)with the increase of Cu concentration.The decoration of Cu greatly enhances the catalytic activity of CeO_(2)nanomaterials.30 wt%Cu/CeO_(2)composite material shows the best photocatalytic activities for the degradation of methyl orange(MO)(95.99%),which is about 4.3times that of CeO_(2)at the same time(120 min).UV-vis diffuse reflectance spectroscopy(DRS)results show that the semiconductor band gap is reduced with the addition of metallic Cu,which leads to the enhancement of photocatalytic activity.The free radical trapping experiments demonstrate that·O_(2)-and h+are the main active species in the photocatalytic degradation of MO.Based on the above results,a hypothesized mechanism for enhanced photocatalysis of Cu/CeO_(2)nanomaterials was proposed:the porous structure provides more reactive sites and channels for mass transfer,and the presence of metallic Cu improves the oxygen vacancy concentration of CeO_(2)and then promotes charge-carrier separation,which helps enhance the photocatalytic performance of Cu/CeO_(2).展开更多
The calcium-doped ZnO nanoparticles,Zn1-xCaxO(x=0,0.025,0.05,0.075)were prepared by the solution combustion method.The synthesized nanoparticles were characterized by various techniques such as XRD,FTIR,Raman,FE...The calcium-doped ZnO nanoparticles,Zn1-xCaxO(x=0,0.025,0.05,0.075)were prepared by the solution combustion method.The synthesized nanoparticles were characterized by various techniques such as XRD,FTIR,Raman,FESEM-EDX,PL,Impedance,and UV-Vis.The Rietveld refinement of the X-ray diffractogram yields the crystalline structure and lattice parameters.Also,the XRD analysis shows that the substitution of Ca into ZnO does not alter the Wurtzite structure of ZnO.The crystallite size of the samples,calculated using the Scherer equation,was found to be between 46 nm and 92 nm.FTIR spectra detect the ZnO-related vibration modes of the samples.The FESEM morphological images suggest the spherical shape of the synthesized nanoparticles.The EDAX spectra identify the presence of Zn,Ca,and O atoms in the samples.The Raman active modes of the ZnO phase were identified by Raman spectral analysis.The analysis of Photoluminescence(PL)spectra gives information about the UV emission and other visible bands corresponding to violet,blue,and green emission representing different intrinsic defects in synthesized nanoparticles.Using UV-vis spectroscopy,the optical transparency and band gap values were examined.The energy band gap obtained by Tauc’s plot was decreased with the increase in Ca doping.Impedance analysis shows that the grain conductivity increased with the increase in dopant concentration.Contrarily,the total conductivity decreased with the increasing doping concentration due to increased grain boundary resistance.The proposed work demonstrates the changes in microstructure,electrical conductivity,and optical bandgap energy with Ca-doping.These synthesized Ca-doped ZnO nanoparticles could be promising materials for photocatalytic applications.展开更多
Porous LiNiVO4 powder was synthesized via solution combustion synthesis method using lithium nitrate, nickel nitrate,ammonium metavanadate and citric acid as raw materials. Thermogravimetry (TG) and differential scann...Porous LiNiVO4 powder was synthesized via solution combustion synthesis method using lithium nitrate, nickel nitrate,ammonium metavanadate and citric acid as raw materials. Thermogravimetry (TG) and differential scanning calorimetry (DSC),X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy and transmission electron microscopy (TEM) were used toevaluate the structures and morphologies of samples. The results show that the calcination temperature has significant effect on thecrystallinity and morphologies. Pure LiNiVO4 flaky nanoparticles with a mean particle size around 20 nm can be readily prepared bycalcining the precursor in air at 500 °C for 2 h. As a cathode material for lithium-ion batteries, the porous LiNiVO4 powder exhibits agood structural reversibility.展开更多
CO_(2) is the most cost-eff ective and abundant carbon resource,while the reverse water-gas reaction(rWGS)is one of the most eff ective methods of CO_(2) utilization.This work presents a comparative study of rWGS acti...CO_(2) is the most cost-eff ective and abundant carbon resource,while the reverse water-gas reaction(rWGS)is one of the most eff ective methods of CO_(2) utilization.This work presents a comparative study of rWGS activity for perovskite systems based on AFeO_(3)(where A=Ce,La,Y).These systems were synthesized by solution combustion synthesis(SCS)with diff erent ratios of fuel(glycine)and oxidizer(φ),diff erent amounts of NH 4 NO_(3),and the addition of alumina or silica as supports.Various techniques,including X-ray diff raction analysis,thermogravimetric analysis,Fourier transform infrared spectroscopy(FTIR),scanning electron microscopy,energy-dispersive X-ray spectroscopy,N 2-physisorption,H_(2) temper-ature-programmed reduction,temperature-programmed desorption of H_(2) and CO_(2),Raman spectroscopy,and in situ FTIR,were used to relate the physicochemical properties with the catalytic performance of the obtained composites.Each specifi c perovskite-containing system(either bulk or supported)has its own optimalφand NH_(4) NO_(3) amount to achieve the highest yield and dispersion of the perovskite phase.Among all synthesized systems,bulk SCS-derived La-Fe-O systems showed the highest resistance to reducing environments and the easiest hydrogen desorption,outperforming La-Fe-O produced by solgel combustion(SGC).CO_(2) conversion into CO at 600°C for bulk ferrite systems,depending on the A-cation type and preparation method,follows the order La(SGC)<Y<Ce<La(SCS).The diff erences in properties between La-Fe-O obtained by the SCS and SGC methods can be attributed to diff erent ratios of oxygen and lanthanum vacancy contributions,hydroxyl coverage,morphology,and free iron oxide presence.In situ FTIR data revealed that CO_(2) hydrogenation occurs through formates generated under reaction conditions on the bulk system based on La-Fe-O,obtained by the SCS method.γ-Al_(2)O_(3) improves the dispersion of CeFeO_(3) and LaFeO_(3) phases,the specifi c surface area,and the quantity of adsorbed H_(2) and CO_(2).This led to a signifi cant increase in CO_(2) conversion for supported CeFeO_(3) but not for the La-based system compared to bulk and SiO_(2)-supported perovskite catalysts.However,adding alumina increased the activity per mass for both Ce-and La-based perovskite systems,reducing the amount of rare-earth components in the catalyst and thereby lowering the cost without substantially compromising stability.展开更多
In this study, the influences of La_(2)O_(3) added on the phase, morphology and reduction process of tungsten oxide prepared by solution combustion synthesis(SCS) were investigated for the first time. And tungsten nan...In this study, the influences of La_(2)O_(3) added on the phase, morphology and reduction process of tungsten oxide prepared by solution combustion synthesis(SCS) were investigated for the first time. And tungsten nanopowders with different La_(2)O_(3) doping amount(0.5~5.0 wt%) were successfully prepared by SCS and followed hydrogen reduction. The results showed that with the increase of La_(2)O_(3) addition,the product synthesized by SCS changed from needle-like W_(18) O_(49) to irregularly granulated H0.53 WO3 and the complete reduction temperature also increased form 700°C to 850°C. The densification behavior of as-prepared W nanopowders revealed that the densification inhibitory effect of La_(2)O_(3) was enhanced as the La_2O_3 addition increased. Nevertheless, due to the optimal size and distribution of La_(2)O_(3) particles,the sample with 2.0 wt% La_(2)O_(3) addition has a smallest grain size of 0.47 μm and a highest microhardness value of 739.3 Hv0.2, which are the best compared with the literature.展开更多
基金Project(2132046)supported by the Beijing Natural Science Foundation,ChinaProject(51104007)supported by the National Natural Science Foundation of China
文摘Ni-Y2O3 nanocomposite powder with uniform distribution of fine oxide particles in the metal matrix was successfully fabricated via solution combustion process followed by hydrogen reduction. The combustion behavior was investigated by DTA-TG analysis. The influence of urea to nickel nitrate（U/Ni） ratio on the combustion behavior and morphology evolution of the combusted powder was investigated. The morphological characteristics and phase transformation of the combusted powder and the reduced powder were characterized by FESEM, TEM and XRD. The HRTEM image of Ni-Y2O3 nanocomposite powder indicated that Y2O3 particles with average particle size of about 10 nm dispersed uniformly in the nickel matrix.
基金Project supported bythe National Natural Science Foundation of China (50306008) and the Fund fromthe Preli minary Research Project of General Equipment Ministry (41328030507)
文摘Perovskite LaMnO3 powders with an average crystallite size of 12.5 nm were rapidly synthesized via a microwave-induced autocombustion reaction using glycine as a fuel and nitrate as an oxidant. After self-propagating combustion, the desired nanocrystalline perovskite LaMnO3 was obtained and no further calcination was carried out. The possible processes of combustion reaction were discussed according to the principle of propellant chemistry. The autocombustion and thermal decomposition of the precursor were investigated using the TG-DTA and FT-IR techniques. The influences of glycine-nitrate molar ratio and heat-treatment temperature on the perovskite phase formation and crystallite size of as-burnt powder were studied by XRD. The morphology and size of the as-burnt powder before and after milling were characterized and compared by TEM.
基金Project supported bythe National Natural Science Foundation of China (50306008) andthefundfromthe Preli minary ResearchProject of General Equipment Ministry (41328030507)
文摘A novel salt-assisted combustion process with ethylene glycol as a fuel and nitrate as an oxidant to synthesize high surface area celia nanopowders was reported. The effects of various tunable conditions, such as fuel-to-oxidant ratio, type of salts, and amount of added salts, on the characteristics of the as-prepared powders were investigated by X-ray diffraction, transmission electron microscopy and BET surface area measurement. A mechanism scheme was proposed to illustrate the possible formation processes of well-dispersed ceria nanoparticles in the salt-assisted combustion synthesis. It was verified that the simple introduction of leachable inert inorganic salts as an excellent agglomeration inhibitor into the redox mixture precursor leads to the formation of well-dispersed ceria particles with particle size in the range of 4 ～6 nm and a drastic increase in the surface area. The presence of KCl results in an over ten-fold increment in specific surface area from 14.10 m^2·g^-1 for the produced ceria powders via the conventional combustion synthesis process to 156.74 m^2·g^-1 for the product by the salt-assisted combustion synthesis process at the same molar ratio of ethylene glycol-nitrate.
基金the National Natural Science Foundation of China (50306008)Start up Research Fund of Nanchang University and the Natural Science Foundation of Higher Education Institutions in Anhui Province (KJ2007B231)
文摘Highly dispersed perovskite NdCoO3 nanoparticles were prepared by a novel salt-assisted combustion process. The effects of NaCl content and calcination temperature on the characteristics of the products were characterized by X-Ray Diffraction (XRD), Transmission Electron Microscopy (TEM) and BET surface area measurement. The facile introduction of NaCl in the conventional combustion synthesis process was found to result in the formation of well-dispersed perovskite nanoparticles and increase specific surface areas of the resultants from 1.7 to 43.2 m2·g-1. The catalytic properties of the typical NdCoO3 samples for thermal decomposition of ammonia perchlorate (AP) and their correlation with the NdCoO3 microstructure were investigated by Differential Scanning Calorimetry (DSC). The DSC results indicate that the addition of the amorphous NdCoO3 nanoparticles to AP incorporates two small exothermic peaks of AP into a strong exothermic peak, decreases the temperature of the AP exothermic peak to 314.0 ℃ by reduction of 138.3 ℃ and increases the apparent decomposition heat from 515 J·g-1 to over 1441 J·g-1, showing the intense catalytic activity for thermal decomposition of AP. It is also clear that the catalytic activity of the resultant NdCoO3 is related to their microstructure. According to Kissinger′s method, the kinetics parameters of the thermal decomposition of AP catalyzed by the as-prepared NdCoO3 samples were calculated to account for the order of their catalytic activity.
基金Project(51104007)supported by the National Natural Science Foundation of ChinaProject(2132046)supported by Beijing Natural Science Foundation,China
文摘Fe-Ni-Y2O3 nanocomposites with uniform distribution of fine oxide particles in the gamma Fe Ni matrix were successfully fabricated via solution combustion followed by hydrogen reduction. The morphological characteristics and phase transformation of the combusted powder and the Fe-Ni-Y2O3 nanocomposites were characterized by XRD, FESEM and TEM.Porous Fe-Ni-Y2O3 nanocomposites with crystallite size below 100 nm were obtained after reduction. The morphology, phases and magnetic property of Fe-Ni-Y2O3 nanocomposites reduced at different temperatures were investigated. The Fe-Ni-Y2O3 nanocomposite reduced at 900 °C has the maximum saturation magnetization and the minimum coercivity values of 167.41 A/(m2·kg)and 3.11 k A/m, respectively.
基金Funded by the Yangfan Project of Guangdong Province(No.2015YT02C089)the Natural Science Foundation of Shandong Province(No.ZR2020MB113)。
文摘Nano-pelletα-Al_(2)O_(3) was prepared using aluminum nitrate as precursor and urea as fuel by a fast method of solution combustion synthesis.The formation of the nano material was dependent on the molar ratio of fuel/oxidant,calcination temperature,and foreign metallic ions.The prerequisite conditions of the formation were a suitable fuel/oxidant molar ratio larger than two and calcination temperature higher than 673 K.Foreign ions,Ce^(4+) or Co^(2+),hindered this formation via promoting the generation of stable penta-coordinated Al^(3+) ions due to strong interaction with alumina,were revealed by ^(27)Al NMR spectra.Such Al^(3+) ions were recognized as a critical intermediate state for the phase transformation of alumina and their presence deterred the transformation.The nano-pellet morphology of the product demonstrated a specific surface area of 69 m^(2)/g,of which the external surface area occupied 59 m^(2)/g.It was found that the supported cobalt acetate on such nano-pellets existed as nanoparticles attached to the external surface,evidenced by the TEM characterization.The prepared catalyst could efficiently catalyze the selective oxidation of cyclohexane under the reaction condition of pressure under 0.8 MPa,temperature at 373 K,and time for 4 hours.The conversion of the reaction achieved up to 7.9%;while the cyclohexanone selectivity was 42.7%and the cyclohexanone and cyclohexanol selectivity was 91.6%.This catalytic performance recommends the supported cobalt acetate on the inert nano-pellet a-Al_(2)O_(3) as a promising catalyst for the selective oxidation of cyclohexane.
基金Supported by the National Natural Science Foundation of China(21566005)the Natural Science Foundation of Guangxi Province(2016GXNSFFA380015)
文摘A 20 wt% Ni/bentonite catalyst was prepared by a solution combustion synthesis (SCS), which exhibited higher activity for the CO_2methanation than that of an impregnation method (IPM), and the catalyst prepared by SCS showed a CO_2 conversion of 85% and a CH4selectivity of 100% at 300 °C, atmospheric pressure, and 3600 ml·(g cat)-1·h-1, and the catalyst exhibited stable within a 110-h reaction. The results showed higher me- tallic Ni dispersion, smaller Ni particle size, larger specific surface area and lower reduction temperature in the Ni/ bentonite prepared by SCS than that of IPM. And the Ni/bentonite prepared by the SCS moderated the interaction between NiO and bentonite.
基金Project supported by the Fundamental Research Funds for the Central Universities(2019ZDPY20)Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX21_2199)。
文摘The Cu/CeO_(2)nanoporous composite material was prepared via a one-step and energy-saving method of solution combustion synthesis(SCS).The phase composition,surface morphology and optical characteristics of Cu/CeO_(2)were studied.The results show that the SCS products are composed of cubic fluorite CeO_(2)and Cu.Due to the generation and escape of gas during the synthetic reaction,the SCS CeO_(2)shows porous structure,in which the mesopores(diameter 10-17 nm)nest in the wall of large pores(diameter80-300 nm).X-ray photoelectron spectroscopy(XPS)outcomes indicate that the oxygen vacancy concentration of CeO_(2)increases(18.97%-30.93%)with the increase of Cu concentration.The decoration of Cu greatly enhances the catalytic activity of CeO_(2)nanomaterials.30 wt%Cu/CeO_(2)composite material shows the best photocatalytic activities for the degradation of methyl orange(MO)(95.99%),which is about 4.3times that of CeO_(2)at the same time(120 min).UV-vis diffuse reflectance spectroscopy(DRS)results show that the semiconductor band gap is reduced with the addition of metallic Cu,which leads to the enhancement of photocatalytic activity.The free radical trapping experiments demonstrate that·O_(2)-and h+are the main active species in the photocatalytic degradation of MO.Based on the above results,a hypothesized mechanism for enhanced photocatalysis of Cu/CeO_(2)nanomaterials was proposed:the porous structure provides more reactive sites and channels for mass transfer,and the presence of metallic Cu improves the oxygen vacancy concentration of CeO_(2)and then promotes charge-carrier separation,which helps enhance the photocatalytic performance of Cu/CeO_(2).
文摘The calcium-doped ZnO nanoparticles,Zn1-xCaxO(x=0,0.025,0.05,0.075)were prepared by the solution combustion method.The synthesized nanoparticles were characterized by various techniques such as XRD,FTIR,Raman,FESEM-EDX,PL,Impedance,and UV-Vis.The Rietveld refinement of the X-ray diffractogram yields the crystalline structure and lattice parameters.Also,the XRD analysis shows that the substitution of Ca into ZnO does not alter the Wurtzite structure of ZnO.The crystallite size of the samples,calculated using the Scherer equation,was found to be between 46 nm and 92 nm.FTIR spectra detect the ZnO-related vibration modes of the samples.The FESEM morphological images suggest the spherical shape of the synthesized nanoparticles.The EDAX spectra identify the presence of Zn,Ca,and O atoms in the samples.The Raman active modes of the ZnO phase were identified by Raman spectral analysis.The analysis of Photoluminescence(PL)spectra gives information about the UV emission and other visible bands corresponding to violet,blue,and green emission representing different intrinsic defects in synthesized nanoparticles.Using UV-vis spectroscopy,the optical transparency and band gap values were examined.The energy band gap obtained by Tauc’s plot was decreased with the increase in Ca doping.Impedance analysis shows that the grain conductivity increased with the increase in dopant concentration.Contrarily,the total conductivity decreased with the increasing doping concentration due to increased grain boundary resistance.The proposed work demonstrates the changes in microstructure,electrical conductivity,and optical bandgap energy with Ca-doping.These synthesized Ca-doped ZnO nanoparticles could be promising materials for photocatalytic applications.
文摘Porous LiNiVO4 powder was synthesized via solution combustion synthesis method using lithium nitrate, nickel nitrate,ammonium metavanadate and citric acid as raw materials. Thermogravimetry (TG) and differential scanning calorimetry (DSC),X-ray diffraction (XRD), Fourier-transform infrared (FT-IR) spectroscopy and transmission electron microscopy (TEM) were used toevaluate the structures and morphologies of samples. The results show that the calcination temperature has significant effect on thecrystallinity and morphologies. Pure LiNiVO4 flaky nanoparticles with a mean particle size around 20 nm can be readily prepared bycalcining the precursor in air at 500 °C for 2 h. As a cathode material for lithium-ion batteries, the porous LiNiVO4 powder exhibits agood structural reversibility.
基金The research was carried out within the State Assignment of the Ministry of Science and Higher Education of the Russian Federation(project No.FFUG-2024-0036)。
文摘CO_(2) is the most cost-eff ective and abundant carbon resource,while the reverse water-gas reaction(rWGS)is one of the most eff ective methods of CO_(2) utilization.This work presents a comparative study of rWGS activity for perovskite systems based on AFeO_(3)(where A=Ce,La,Y).These systems were synthesized by solution combustion synthesis(SCS)with diff erent ratios of fuel(glycine)and oxidizer(φ),diff erent amounts of NH 4 NO_(3),and the addition of alumina or silica as supports.Various techniques,including X-ray diff raction analysis,thermogravimetric analysis,Fourier transform infrared spectroscopy(FTIR),scanning electron microscopy,energy-dispersive X-ray spectroscopy,N 2-physisorption,H_(2) temper-ature-programmed reduction,temperature-programmed desorption of H_(2) and CO_(2),Raman spectroscopy,and in situ FTIR,were used to relate the physicochemical properties with the catalytic performance of the obtained composites.Each specifi c perovskite-containing system(either bulk or supported)has its own optimalφand NH_(4) NO_(3) amount to achieve the highest yield and dispersion of the perovskite phase.Among all synthesized systems,bulk SCS-derived La-Fe-O systems showed the highest resistance to reducing environments and the easiest hydrogen desorption,outperforming La-Fe-O produced by solgel combustion(SGC).CO_(2) conversion into CO at 600°C for bulk ferrite systems,depending on the A-cation type and preparation method,follows the order La(SGC)<Y<Ce<La(SCS).The diff erences in properties between La-Fe-O obtained by the SCS and SGC methods can be attributed to diff erent ratios of oxygen and lanthanum vacancy contributions,hydroxyl coverage,morphology,and free iron oxide presence.In situ FTIR data revealed that CO_(2) hydrogenation occurs through formates generated under reaction conditions on the bulk system based on La-Fe-O,obtained by the SCS method.γ-Al_(2)O_(3) improves the dispersion of CeFeO_(3) and LaFeO_(3) phases,the specifi c surface area,and the quantity of adsorbed H_(2) and CO_(2).This led to a signifi cant increase in CO_(2) conversion for supported CeFeO_(3) but not for the La-based system compared to bulk and SiO_(2)-supported perovskite catalysts.However,adding alumina increased the activity per mass for both Ce-and La-based perovskite systems,reducing the amount of rare-earth components in the catalyst and thereby lowering the cost without substantially compromising stability.
基金financially supported by the National Key R&D Program of China (2017YFB0306000 and 2017YFB0305600)the National Natural Science Foundation Program of China (51574031,51604239,51604240 and 51674095)+2 种基金the Natural Science Foundation Program of Beijing (2162027)the General Project of the Education Department of Hunan Province (15C1308)the Fundamental Research Funds for the Central Universities(JZ2017HGBZ0920)。
文摘In this study, the influences of La_(2)O_(3) added on the phase, morphology and reduction process of tungsten oxide prepared by solution combustion synthesis(SCS) were investigated for the first time. And tungsten nanopowders with different La_(2)O_(3) doping amount(0.5~5.0 wt%) were successfully prepared by SCS and followed hydrogen reduction. The results showed that with the increase of La_(2)O_(3) addition,the product synthesized by SCS changed from needle-like W_(18) O_(49) to irregularly granulated H0.53 WO3 and the complete reduction temperature also increased form 700°C to 850°C. The densification behavior of as-prepared W nanopowders revealed that the densification inhibitory effect of La_(2)O_(3) was enhanced as the La_2O_3 addition increased. Nevertheless, due to the optimal size and distribution of La_(2)O_(3) particles,the sample with 2.0 wt% La_(2)O_(3) addition has a smallest grain size of 0.47 μm and a highest microhardness value of 739.3 Hv0.2, which are the best compared with the literature.
